You are here

ROBUSTNESS ANALYSIS FOR TURBOMACHINERY STALL FLUTTER

Download pdf | Full Screen View

Date Issued:
2011
Abstract/Description:
Flutter is an aeroelastic instability phenomenon that can result either in serious damage or complete destruction of a gas turbine blade structure due to high cycle fatigue. Although 90% of potential high cycle fatigue occurrences are uncovered during engine development, the remaining 10% stand for one third of the total engine development costs. Field experience has shown that during the last decades as much as 46% of fighter aircrafts were not mission-capable in certain periods due to high cycle fatigue related mishaps. To assure a reliable and safe operation, potential for blade flutter must be eliminated from the turbomachinery stages. However, even the most computationally intensive higher order models of today are not able to predict flutter accurately. Moreover, there are uncertainties in the operational environment, and gas turbine parts degrade over time due to fouling, erosion and corrosion resulting in parametric uncertainties. Therefore, it is essential to design engines that are robust with respect to the possible uncertainties. In this thesis, the robustness of an axial compressor blade design is studied with respect to parametric uncertainties through the Mu analysis. The nominal flutter model is adopted from . This model was derived by matching a two dimensional incompressible flow field across the flexible rotor and the rigid stator. The aerodynamic load on the blade is derived via the control volume analysis. For use in the Mu analysis, first the model originally described by a set of partial differential equations is reduced to ordinary differential equations by the Fourier series based collocation method. After that, the nominal model is obtained by linearizing the achieved non-linear ordinary differential equations. The uncertainties coming from the modeling assumptions and imperfectly known parameters and coefficients are all modeled as parametric uncertainties through the Monte Carlo simulation. As compared with other robustness analysis tools, such as Hinf, the Mu analysis is less conservative and can handle both structured and unstructured perturbations. Finally, Genetic Algorithm is used as an optimization tool to find ideal parameters that will ensure best performance in terms of damping out flutter. Simulation results show that the procedure described in this thesis can be effective in studying the flutter stability margin and can be used to guide the gas turbine blade design.
Title: ROBUSTNESS ANALYSIS FOR TURBOMACHINERY STALL FLUTTER.
47 views
20 downloads
Name(s): Forhad, Md, Author
Xu, Yunjun, Committee Chair
University of Central Florida, Degree Grantor
Type of Resource: text
Date Issued: 2011
Publisher: University of Central Florida
Language(s): English
Abstract/Description: Flutter is an aeroelastic instability phenomenon that can result either in serious damage or complete destruction of a gas turbine blade structure due to high cycle fatigue. Although 90% of potential high cycle fatigue occurrences are uncovered during engine development, the remaining 10% stand for one third of the total engine development costs. Field experience has shown that during the last decades as much as 46% of fighter aircrafts were not mission-capable in certain periods due to high cycle fatigue related mishaps. To assure a reliable and safe operation, potential for blade flutter must be eliminated from the turbomachinery stages. However, even the most computationally intensive higher order models of today are not able to predict flutter accurately. Moreover, there are uncertainties in the operational environment, and gas turbine parts degrade over time due to fouling, erosion and corrosion resulting in parametric uncertainties. Therefore, it is essential to design engines that are robust with respect to the possible uncertainties. In this thesis, the robustness of an axial compressor blade design is studied with respect to parametric uncertainties through the Mu analysis. The nominal flutter model is adopted from . This model was derived by matching a two dimensional incompressible flow field across the flexible rotor and the rigid stator. The aerodynamic load on the blade is derived via the control volume analysis. For use in the Mu analysis, first the model originally described by a set of partial differential equations is reduced to ordinary differential equations by the Fourier series based collocation method. After that, the nominal model is obtained by linearizing the achieved non-linear ordinary differential equations. The uncertainties coming from the modeling assumptions and imperfectly known parameters and coefficients are all modeled as parametric uncertainties through the Monte Carlo simulation. As compared with other robustness analysis tools, such as Hinf, the Mu analysis is less conservative and can handle both structured and unstructured perturbations. Finally, Genetic Algorithm is used as an optimization tool to find ideal parameters that will ensure best performance in terms of damping out flutter. Simulation results show that the procedure described in this thesis can be effective in studying the flutter stability margin and can be used to guide the gas turbine blade design.
Identifier: CFE0003999 (IID), ucf:48666 (fedora)
Note(s): 2011-08-01
M.S.
Engineering and Computer Science, Department of Mechanical Materials and Aerospace Engineering
Masters
This record was generated from author submitted information.
Subject(s): Flutter
Gas Turbine Blade
Mu Analysis
Robustness
Persistent Link to This Record: http://purl.flvc.org/ucf/fd/CFE0003999
Restrictions on Access: campus 2012-07-01
Host Institution: UCF

In Collections