Current Search: Sohn, Yong-ho (x)
View All Items
- Title
- EFFECTS OF BOND COAT SURFACE PREPARATION ON THERMAL CYCLING LIFETIME AND FAILURE CHARACTERISTICS OF THERMAL BARRIER COATINGS.
- Creator
-
Liu, Jing, Sohn, Yong-ho, University of Central Florida
- Abstract / Description
-
Thermal barrier coatings (TBCs) have been widely used in gas turbine engines to protect the underlying metal from high operating temperature so as to improve the durability of the components and enhance the engine efficiency. However, since the TBCs always operate in a demanding high-temperature environment of aircraft and industrial gas-turbine engines, a better understanding of this complex system is required to improve the durability and reliability.The objective of this study is to...
Show moreThermal barrier coatings (TBCs) have been widely used in gas turbine engines to protect the underlying metal from high operating temperature so as to improve the durability of the components and enhance the engine efficiency. However, since the TBCs always operate in a demanding high-temperature environment of aircraft and industrial gas-turbine engines, a better understanding of this complex system is required to improve the durability and reliability.The objective of this study is to investigate the effects of surface modification for the NiCoCrAlY bond coats on the thermal cycling lifetime and failure characteristics of TBCs. Parameters of modification for the bond coats included as-sprayed, barrel-finished, hand-polished and pre-oxidation heat treatment at 1100 C in =10-8 atm up to 4 hours, carried out prior to the electron beam physical vapor deposition (EB-PVD) of ZrO2-7wt% Y2O3 (7YSZ) ceramic topcoat. The resulting characteristics of the bond coat and the thermally grown oxide (TGO) scale were initially documented by surface roughness, phase constituents of the TGO scale, and residual stress of the TGO scale. The thermal cycling test consisted of 10-minute heat-up to 1121 C, 40-minute hold at 1121 C, and 10-minute forced air-quench. As-coated and thermally-cycled TBCs were characterized by optical profilometry (OPM), photo-stimulated luminescence spectroscopy (PSLS), optical microscopy, scanning electron microscopy (SEM) equipped with energy dispersive spectroscopy (EDS), and scanning/transmission electron microscopy (TEM/STEM) equipped with high angle annular dark field (HAADF) and X-ray energy dispersive spectroscopy (XEDS). TBC specimens for TEM/STEM analysis were prepared by focused ion beam (FIB) in-situ lift-out (INLO) technique.Superior thermal cycling lifetime was observed for TBCs with as-sprayed bond coats regardless of pre-oxidation heat treatment, and TBCs with hand-polished bond coats only after pre-oxidation heat treatment. With pre-oxidation heat treatment, relative photostimulated luminescence intensity of the equilibrium ¦Á-Al2O3 increased. Thus, the improvement in TBC lifetime can be correlated with an increase in the amount of ¦Á-Al2O3 in the TGO scale, given a specific surface modification/roughness. The lifetime improvement due to pre-oxidation was particularly significant to TBCs with smooth hand-polished bond coats and negligible for TBCs with rough as-sprayed bond coats.Spallation-fracture paths depended on the lifetime of TBCs. Premature spallation of TBCs occurred at the interface between the YSZ and TGO. Longer durability can be achieved by restricting the fracture paths to the TGO/bond coat interface. Small particulate phase observed through the TGO scale was identified as Y2O3 (cubic) by diffraction analysis on TEM. While small addition of Y in the NiCoCrAlY bond coat helps the adhesion of the TGO scale, excessive alloying can lead to deleterious effects.
Show less - Date Issued
- 2004
- Identifier
- CFE0000097, ucf:46083
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0000097
- Title
- MECHANISMS OF LIFETIME IMPROVEMENT IN THERMAL BARRIER COATINGS WITH HF AND/OR Y MODIFICATION OF CMSX-4 SUPERALLOY SUBSTRATES.
- Creator
-
Liu, Jing, Sohn, Yong ho, University of Central Florida
- Abstract / Description
-
In modern turbine engines for propulsion and energy generation, thermal barrier coating (TBCs) protect hot-section blades and vanes, and play a critical role in enhancing reliability, durability and operation efficiency. In this study, thermal cyclic lifetime and microstructural degradation of electron beam physical vapor deposited (EB-PVD) Yttria Stabilized Zirconia (YSZ) with (Ni,Pt)Al bond coat and Hf- and/or Y- modified CMSX-4 superalloy substrates were examined. Thermal cyclic lifetime...
Show moreIn modern turbine engines for propulsion and energy generation, thermal barrier coating (TBCs) protect hot-section blades and vanes, and play a critical role in enhancing reliability, durability and operation efficiency. In this study, thermal cyclic lifetime and microstructural degradation of electron beam physical vapor deposited (EB-PVD) Yttria Stabilized Zirconia (YSZ) with (Ni,Pt)Al bond coat and Hf- and/or Y- modified CMSX-4 superalloy substrates were examined. Thermal cyclic lifetime of TBCs was measured using a furnace thermal cycle test that consisted of 10-minute heat-up, 50-minute dwell at 1135C, and 10-minute forced-air-quench. TBC lifetime was observed to improve from 600 cycles to over 3200 cycles with appropriated Hf- and/or Y alloying of CMSX-4 superalloys. This significant improvement in TBC lifetime is the highest reported lifetime in literature with similar testing parameters. Beneficial role of reactive element (RE) on the durability of TBCS were systematically investigated in this study. Photostimulated luminescence spectroscopy (PL) was employed to non-destructively measure the residual stress within the TGO scale as a function of thermal cycling. Extensive microstructural analysis with emphasis on the YSZ/TGO interface, TGO scale, TGO/bond coat interface was carried out by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and scanning electron microscopy (STEM) as a funcion of thermal cycling including after the spallation failure. Focused ion beam in-situ lift-out (FIB-INLO) technique was employed to prepare site-specific TEM specimens. X-ray diffraction (XRD) and secondary ion mass spectroscopy (SIMS) were also employed for phase identification and interfacial chemical analysis. While undulation of TGO/bond coat interface (e.g., rumpling and ratcheting) was observed to be the main mechanism of degradation for the TBCs on baseline CMSX-4, the same interface remained relatively flat (e.g., suppressed rumpling and ratcheting) for durable TBCs on Hf- and/or Y-modified CMSX-4. The fracture paths changed from the YSZ/TGO interface to the TGO/bond coat interface when rumpling was suppressed. The geometrical incompatibility between the undulated TGO and EB-PVD YSZ lead to the failure at the YSZ/TGO interface for TBCs with baseline CMSX-4. The magnitude of copressive residual stress within the TGO scale measured by PL gradually decreased as a function of thermal cycling for TBCs with baseline CMSX-4 superalloy substrates. This gradual decrease corrsponds well to the undulation of the TGO scale that may lead to relaxation of the compressive residual stress within the TGO scale. For TBCs with Hf- and/or Y-modified CMSX-4 superalloy substrates, the magnitude of compressive residual stress within the TGO scale remained relatively constant throughout the thermal cycling, although PL corresponding to the stress-relief caused by localized cracks at the TGO/bond coat interface and within the TGO scale was observed frequently starting 50% of lifetime. A slightly smaller parabolic growth constant and grain size of the TGO scale was observed for TBCs with Hf- and/or Y- modified CMSX-4. Small monoclinic HfO2 precipitates were observed to decorate grain boundaries and the triple pointes within the alpha-Al2O3 scale for TBCs with Hf- and/or Y-modified CMSX-4 substrates. Segregation of Hf/Hf4+ at the TGO/bond coat interfaces was also observed for TBCs with Hf- and/or Y-modified CMSX-4 superalloys substrates. Adherent and pore-free YSZ/TGO interface was observed for TBCs with Hf- and/or Y-modified CMSX-4, while a significant amount of decohesion at the YSZ/TGO interface was observed for TBCs with baseline CMSX-4. The beta-NiAl(B2) phase in the (Ni,Pt)Al bond coat was observed to partially transform into gama prime-Ni3Al (L12) phase due to depletion of Al in the bond coat during oxidation. More importantly, the remaining beta-NiAl phase transformed into L10 martensitic phase upon cooling even though there was no significant difference in these phase transformations for all TBCs. Results from these microstructural observations are documented to elucidate mechanisms that suppress the rumpling of the TGO/bond coat interface, which is responsible for superior performance of EB-PVD TBCs with (Ni,Pt)Al bond coat and Hf- and/or Y-modified CMXS-4 superalloy.
Show less - Date Issued
- 2007
- Identifier
- CFE0001872, ucf:47382
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0001872
- Title
- MULTICOMPONENT INTERDIFFUSION IN AUSTENITIC NI-, FE-NI-BASE ALLOYS AND L12-NI3AL INTERMETALLIC FOR HIGH-TEMPERATURE APPLICATIONS.
- Creator
-
Garimella, Narayana, Sohn, Yong-ho, University of Central Florida
- Abstract / Description
-
Interdiffusion in multicomponent-multiphase alloys is commonly encountered in many materials systems. The developments of multicomponent-multiphase alloys require control of microstructure through appropriate heat treatment, involving solid-state transformations, precipitation processes, and surface modification, where the interdiffusion processes play a major role. In addition, interdiffusion processes often control degradation and failure of these materials systems. Enhanced performance and...
Show moreInterdiffusion in multicomponent-multiphase alloys is commonly encountered in many materials systems. The developments of multicomponent-multiphase alloys require control of microstructure through appropriate heat treatment, involving solid-state transformations, precipitation processes, and surface modification, where the interdiffusion processes play a major role. In addition, interdiffusion processes often control degradation and failure of these materials systems. Enhanced performance and reliable durability always requires a detailed understanding of interdiffusion. In this study, ternary and quaternary interdiffusion in Ni-Cr-X (X = Al, Si, Ge, Pd) at 900C and 700C, Fe-Ni-Cr-X (X = Si, Ge) at 900C, and Ni3Al alloyed with Ir, Ta and Re at 1200C were examined using solid-to-solid diffusion couples. Interdiffusion fluxes of individual components were calculated directly from experimental concentration profiles determined by electron probe microanalysis. Moments of interdiffusion fluxes were examined to calculate main and cross interdiffusion coefficients averaged over selected composition ranges from single diffusion couple experiments. Consistency in the magnitude and sign of ternary and quaternary interdiffusion coefficient were verified with interdiffusion coefficients determined by Boltzmann-Matano analysis that requires multiple diffusion couples with intersecting compositions. Effects of alloying additions, Al, Si, Ge and Pd, on the interdiffusion in Ni-Cr-X and Fe-Ni-Cr-X alloys were examined with respect to Cr2O3-forming ability at high temperature. Effects of Ir, Ta and Re additions on interdiffusion in Ni3Al were examined with respect to phase stability and site-preference. In addition, a numerically refined approach to determine average ternary interdiffusion coefficients were developed. Concentrations and moments of interdiffusion fluxes are employed to generate multiple combinations of multicomponent interdiffusion coefficient as a function of moments. The matrix of multicomponent interdiffusion coefficients corresponds to the lowest order of the moment. It yields real and positive eigen values which provides reliable average interdiffusion coefficients for the selected composition range.
Show less - Date Issued
- 2009
- Identifier
- CFE0002521, ucf:47639
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0002521
- Title
- INTERDIFFUSION ANALYSIS FOR NICOCRALY AND NIAL VS. VARIOUS SUPERALLOYS.
- Creator
-
Perez, Emmanuel, Sohn, Yong-Ho, University of Central Florida
- Abstract / Description
-
Hot section components in gas turbines can be NiCoCrAlY-coated to provide the component with an Al reservoir that maintains a protective oxide layer on its surface. Over the service life of the component, the coatings degrade by composition and phase changes due to oxidation/hot-corrosion, and multicomponent interdiffusion from and into the superalloy substrate. In this study, the rate of Al interdiffusion into selected Ni-base superalloys using various diffusion couples of two-phase...
Show moreHot section components in gas turbines can be NiCoCrAlY-coated to provide the component with an Al reservoir that maintains a protective oxide layer on its surface. Over the service life of the component, the coatings degrade by composition and phase changes due to oxidation/hot-corrosion, and multicomponent interdiffusion from and into the superalloy substrate. In this study, the rate of Al interdiffusion into selected Ni-base superalloys using various diffusion couples of two-phase NiCoCrAlY (beta + gamma) and single beta-phase NiAl with the selected alloys is measured. The diffusion couples were examined with an emphasis on the composition-dependence of Al interdiffusion. Microstructural analysis of the NiCoCrAlY vs. superalloys couples is performed to examine the dependence of coatings lifetime on the superalloy composition. The beta-NiAl diffusion couples were analyzed to determine the integrated, apparent and average effective interdiffusion coefficient as a function of superalloy's composition. Concentration profiles were obtained by EPMA of the NiAl vs. superalloy diffusion couples. Findings of this study show that the lifetimes of NiCoCrAlY are heavily dependent on superalloy compositions. The rate of interdiffusion in the diffusion couples is affected by the refractory precipitate phase microstructure structures in the interdiffusion zones as well as by component interactions. The results of the beta-NiAl diffusion couples show that increasing concentrations of Cr, Mo and Ti in the superalloy increase the Al effective interdiffusion coefficient into the superalloy, while increasing concentrations of Al, Ta and W reduce it. Thus NiCoCrAlY-superalloy systems may be designed to produce optimal microstructures in the interdiffusion zone and minimize Al interdiffusion by consideration of these diffusional interactions.
Show less - Date Issued
- 2005
- Identifier
- CFE0000681, ucf:46486
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0000681
- Title
- NONDESTRUCTIVE EVALUATION OF THERMAL BARRIER COATINGS WITH THERMAL WAVE IMAGING AND PHOTOSTIMULATED LUMINESCENCE SPECTROSCOPY.
- Creator
-
Franke, Barbara, Sohn, Yong-ho, University of Central Florida
- Abstract / Description
-
Gas Turbine manufacturers strive for increased operating temperatures of gas turbine engines to improve efficiency and performance. One method of increasing the temperature beyond material limits is by applying thermal barrier coatings (TBCs) to hot section components. TBCs provide a thermal gradient between the hot gases and metallic substrate, and allow an increase in turbine inlet temperatures of 100-150ºC. However, spallation of TBCs can cause catastrophic failure of turbine engines...
Show moreGas Turbine manufacturers strive for increased operating temperatures of gas turbine engines to improve efficiency and performance. One method of increasing the temperature beyond material limits is by applying thermal barrier coatings (TBCs) to hot section components. TBCs provide a thermal gradient between the hot gases and metallic substrate, and allow an increase in turbine inlet temperatures of 100-150ºC. However, spallation of TBCs can cause catastrophic failure of turbine engines by incipient melting of the substrate. To prevent such an occurrence, non-destructive evaluation (NDE) techniques are critical for quality control, health monitoring, and life assessment of TBCs. Two techniques in development for this purpose are thermal wave imaging (TWI) and photostimulated luminescence (PL) spectroscopy. TWI is a promising NDE technique with the ability to detect integrity and thickness of TBCs. In this study, TWI was employed as an NDE technique to examine as-coated TBCs with varying thicknesses, and thermally-cycled TBCs for initiation and progression of subcritical-subsurface damage as a function of thermal cycling. TWI and thermal response amplitude were correlated to the microstructural characteristics and damage progression of TBCs based on phenomenological expressions of thermal diffusion. The TBC specimens examined consisted of air plasma sprayed ZrO2 - 7wt.% Y2O3 on NiCoCrAlY bond coats with Haynes 230 superalloy substrate. As-coated specimens of varying thicknesses were evaluated by TWI to examine its applicability as a thickness measurement tool. It was found that heat dissipation through the TBC following pulsed excitation by xenon flash lamps initially followed the 1-D law of conduction and deviated from it as a function of thickness and time. The deviation resulted from quick dissipation of heat into the conductive metallic substrate. Therefore, with calibration, TWI can be used as a tool for YSZ thickness measurements of APS TBCs in the as-coated condition for quality control measures. Specimens of uniform thickness were evaluated as a function of thermal cyclic oxidation for subcritical-subsurface damage detection. Thermal cycling was carried out in air with 30-minute heat-up, 10-hour dwell at 1150°C, 30-minute air-quench and 1-hour hold at room temperature. During thermal cycling, TBC specimens were evaluated non-destructively by TWI at room temperature every 10 to 20 thermal cycles, and selected specimens were removed from thermal cycling for microstructural analysis by scanning electron microscopy (SEM). Higher thermal response amplitude associated with disrupted heat transfer was observed where localized spallation at or near the YSZ/TGO interface occurred. The health of the TBC was monitored by a rise in thermal response amplitude which may indicate a coalescence of microcracks to a detectable level. PL has been developed to measure stress, and detect subsurface damage and polymorphic transformation within the thermally grown oxide (TGO) of TBCs. PL was employed in this study as an NDE technique for TBCs to correlate subsurface damage as a function of thermal cyclic oxidation. The TBCs consisted of ZrO2 7 wt.% Y2O3 applied by electron beam physical vapor deposition with an as-coated (Ni,Pt)Al bond coat on a CMSX-4 superalloy substrate. Specimens were thermally cycled with a 10 minute ramp to a peak temperature of 1121°C, 40 minute hold at peak temperature, and 10 minute forced air quench. The TBCs were periodically removed from thermal cycling for NDE using PL until failure. Two specimens were removed from thermal oxidation after 10% and 70% of the average lifetime for microstructural analysis by SEM. During initial thermal cycling, metastable phases and polymorphic transformations of the Al2O3 scale were examined by PL. The polymorphic transformation from a metastable phase to equilibrium a-Al2O3 was detected. Since metastable phases are thought to be detrimental to coating lifetime, detection of these phases by PL can be used as a quality control tool. Nearing end-of-life, relief of the TGO from the compressive residual stress arising from thermal expansion mismatch was detected with PL and confirmed with microstructural analysis that revealed damage initiation (e.g. microcracking within the TGO scale parallel to the interfaces.) Rise in luminescence near the R-line frequency for polycrystalline a-Al2O3 without any residual stress (i.e. n = 14402 cm-1 and n = 14432 cm-1) corresponded to regions where cracked TGO was adhered to YSZ and not exposed to compressive stresses from thermal expansion mismatch upon cooling.
Show less - Date Issued
- 2005
- Identifier
- CFE0000717, ucf:46613
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0000717
- Title
- EFFECTS OF INTERNAL OXIDATION ON THERMO-MECHANICAL PROPERTIES OF ATMOSPHERIC PLASMA SPRAYED CONICRALY COATINGS.
- Creator
-
Patterson, Travis, Sohn, Yong-ho, University of Central Florida
- Abstract / Description
-
Thermal barrier coatings (TBC) with MCrAlY (M=Co and/or Ni) bond coats have been widely used in hot sections of gas turbines to protect underlying superalloys from high temperatures, oxidation, and hot corrosion. Deposition of MCrAlY bond coats using atmospheric plasma spray (APS), as oppose to conventionally employed vacuum/low-pressure plasma spray and high velocity oxy-fuel deposition, allows greater flexibility in ability to coat economically and rapidly for parts with complex geometry...
Show moreThermal barrier coatings (TBC) with MCrAlY (M=Co and/or Ni) bond coats have been widely used in hot sections of gas turbines to protect underlying superalloys from high temperatures, oxidation, and hot corrosion. Deposition of MCrAlY bond coats using atmospheric plasma spray (APS), as oppose to conventionally employed vacuum/low-pressure plasma spray and high velocity oxy-fuel deposition, allows greater flexibility in ability to coat economically and rapidly for parts with complex geometry including internal surfaces. There were three objectives of this study. First, relationships between APS spray parameters and coating microstructure was examined to determine optimum spray parameters to deposit APS CoNiCrAlY bond coats. Second, free-standing APS CoNiCrAlY coatings were isothermally oxidized at 1124C for various periods to examine the evolving microstructure of internal oxidation. Third, as a function of time of isothermal oxidation (i.e., internal oxidation), thermal conductivity and coefficient of thermal expansion were measured for free-standing APS CoNiCrAlY bond coats. Thirteen CoNiCrAlY coatings were deposited on steel substrates by APS using the F4-MB plasma torch. APS CoNiCrAlY bond coats were produced by incremental variation in the flow rate of primary (argon) gas from 85 to 165 SCFH and the flow rate of secondary (hydrogen) gas from 9 to 29 SCFH. Optimum coating microstructure was produced by simultaneously increasing the flow rate of both primary and secondary gas, so that the particle temperature is high enough for sufficient melting and the particle velocity is rapid enough for minimum in-flight oxidation. Optimum spray parameters found in this study were employed to deposit free-standing APS CoNiCrAlY coatings that were isothermally oxidized at 1124ºC for 1, 6, 50,100, and 300 hours. Extent of internal oxidation was examined by scanning electron microscopy and image analysis. Internal oxidation occurred by a thickening of oxide scales segregated at the splat boundaries oriented parallel to the coating surfaces. Thermal conductivity and coefficient of thermal expansion (CTE) of the free-standing APS CoNiCrAlY coatings were measured as a function of internal oxidation (i.e., time of oxidation or extent of internal oxidation). Thermal conductivity of free-standing APS CoNiCrAlY was found to decrease with increasing internal oxidation from 28 to 25 W/m-K. This decrease is due to an increase in the amount of internal oxides with lower thermal conductivity (e.g., Al2O3). CTE of free-standing APS CoNiCrAlY, measured in temperature range of 100~500C, was also found to decrease with increasing internal oxidation. Internal oxides have lower CTE than metallic CoNiCrAlY coatings. These evolving properties of APS CoNiCrAlY should be beneficial to the overall performance of TBCs in gas turbine applications.
Show less - Date Issued
- 2008
- Identifier
- CFE0002400, ucf:47757
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0002400
- Title
- INTERDIFFUSION BEHAVIOR OF U-MO ALLOYS IN CONTACT WITH AL AND AL-SI ALLOYS.
- Creator
-
Perez, Emmanuel, Sohn, Yong-Ho, University of Central Florida
- Abstract / Description
-
U-Mo dispersion and monolithic fuels embedded in Al-alloy matrix are under development to fulfill the requirements of research reactors to use low-enriched molybdenum stabilized uranium alloys as fuels. The system under consideration in this study consisted of body centered cubic (gamma) U-Mo alloys embedded in an Al structural matrix. Significant interaction has been observed to take place between the U-Mo fuel and the Al matrix during manufacturing of the fuel-plate system assembly and...
Show moreU-Mo dispersion and monolithic fuels embedded in Al-alloy matrix are under development to fulfill the requirements of research reactors to use low-enriched molybdenum stabilized uranium alloys as fuels. The system under consideration in this study consisted of body centered cubic (gamma) U-Mo alloys embedded in an Al structural matrix. Significant interaction has been observed to take place between the U-Mo fuel and the Al matrix during manufacturing of the fuel-plate system assembly and during irradiation in reactors. These interactions produce Al-rich phases with physical and thermal properties that adversely affect the performance of the fuel system and can lead to premature failure. In this study, interdiffusion and microstructural development in the U-Mo vs. Al system was examined using solid-to-solid diffusion couples consisting of U-7wt.%Mo, U-10wt.%Mo and U-12wt.%Mo vs. pure Al, annealed at 600°C for 24 hours. The influence of Si alloying addition (up to 5 wt.%) in Al on the interdiffusion microstructural development was also examined using solid-to-solid diffusion couples consisting of U-7wt.%Mo, U-10wt.%Mo and U-12wt.%Mo vs. pure Al, Al-2wt.%Si, and Al-5wt.%Si annealed at 550°C for 1, 5 and 20 hours. To further clarify the diffusional behavior in the U-Mo-Al and U-Mo-Al-Si systems, Al-rich 85.7Al-11.44U-2.86Mo, 87.5Al-10U-2.5Mo, 56.1Al-18.9Si-21.9U-3.1Mo and 69.3Al-11.9Si-18.8U (at.%) alloys were cast and homogenized at 500°C to determine the equilibrium phases of the system. Scanning electron microscopy (SEM), transmission electron microscopy (TEM) and electron probe microanalysis (EPMA) and X-ray diffraction (XRD) were employed to examine the phase development in the diffusion couples and the cast alloys. In ternary U-Mo-Al diffusion couples annealed at 600°C for 24 hours, the interdiffusion microstructure consisted of finely dispersed UAl3, UAl4, U6Mo4Al43, and UMo2Al20 phases while the average composition throughout the interdiffusion zone remained constant at approximately 80 at.% Al. The interdiffusion microstructures observed by EPMA, SEM and TEM analyses were correlated to explain the observed morphological development in the interdiffusion zones. The concept of thermodynamic degrees of freedom was used to justify that, although deviations are apparent, the interdiffusion zones did not significantly deviate from an equilibrium condition in order for the observed microstructures to develop. Selected diffusion couples developed periodic bands within the interdiffusion zone as sub-layers in the three-phase regions. Observation of periodic banding was utilized to augment the hypothesis that internal stresses play a significant role in the phase development and evolution of U-Mo vs. pure Al diffusion couples. The addition of Si (up to 5 wt.%) to the Al significantly reduced the growth rate of the interdiffusion zone. The constituent phases and composition within the interdiffusion zone were also modified. When Si was present in the Al terminal alloys, the interdiffusion zones developed layered morphologies with fine distributions of the (U,Mo)(Al,Si)3 and UMo2Al20 phases. The U6Mo4Al43 phase was observed scarcely in Si depleted regions within the interdiffusion zone. The phase development and evolution of the interdiffusion zone was described in terms of thermodynamic degrees of freedom with minimal deviations from equilibrium.
Show less - Date Issued
- 2011
- Identifier
- CFE0003747, ucf:48778
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0003747
- Title
- MICROSTRUCTURAL INVESTIGATION OF PRECIPITATION HARDENED CUNI2SI+ZR ALLOYS FOR ROTOR APPLICATIONS.
- Creator
-
Vega-Garcia, Jean-Paul, Sohn, Yong-Ho, University of Central Florida
- Abstract / Description
-
Industrial generator components experience high stresses and electrical fields during their service life. Material integrity is key in guaranteeing component performance. CuNi2SiZr, used as rotor wedges in generators, serve to maintain rotor slot content in place while experiencing high centrifugal stresses and low cycle fatigue during start and stop at elevated temperature. The quality and integrity of this material in service can be directly related to its microstructure, which is...
Show moreIndustrial generator components experience high stresses and electrical fields during their service life. Material integrity is key in guaranteeing component performance. CuNi2SiZr, used as rotor wedges in generators, serve to maintain rotor slot content in place while experiencing high centrifugal stresses and low cycle fatigue during start and stop at elevated temperature. The quality and integrity of this material in service can be directly related to its microstructure, which is determined by the processing procedures of the wedges. In this study, the microstructure development in this material is evaluated to eliminate grain boundary defects by optimizing processing parameters, determining the best temperature/time combination for precipitation hardening, and determining cold work effect on aging parameters. Two chemistries containing Nickel-to-Silicon ratios of 3.2 and 3.8 were selected for analysis. Cast samples were hot extruded, cold worked, and precipitation hardened. Parameters were varied at each processing step. Five different levels of cold work (4, 5, 7, 10 and 13%) were evaluated using 5 different aging temperatures (450, 460, 470, 490 and 500ÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂðC). Each processing parametersÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂ' effect on microstructure and subsequently on hardness, conductivity, and tensile strength was recorded to assess material performance and identify grain boundary defects origination. Finding of this study identified observed grain boundary defects, using Transmission Electron Analysis, as voids/micro-tears. These defects on grain boundary are detrimental to low cycle fatigue, creep rupture and tensile strength properties and important aspects of the material performance. Grain boundary defects were observed at all levels of cold work, however, origination of defects was only observed in grain sizes larger than 50ÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂõm. The strengthening phases for the CuNi2Si+Zr alloy system were identified as Ni2Si and Cr3Si. The Nickel-to-Silicon ratio had an evident effect on the electrical conductivity of the material. However, aging benefits were not clearly established between the two Nickel-to-Silicon ratios.
Show less - Date Issued
- 2010
- Identifier
- CFE0003350, ucf:48467
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0003350