View All Items
(1 - 9 of 9)
- Title
- THERMAL DETECTION OF BIOMARKERS USING PHASE CHANGE NANOPARTICLES.
- Creator
-
Wang, Chaoming, Su, Ming, University of Central Florida
- Abstract / Description
-
Most of existing techniques cannot be used to detect molecular biomarkers (i.e., protein and DNA) contained in complex body fluids due to issues such as enzyme inhibition or signal interference. This thesis describes a nanoparticle-based thermal detection method for the highly sensitive detections of multiple DNA biomarkers or proteins contained in different type of fluids such as buffer solution, cell lysate and milk by using solid-liquid phase change nanoparticles as thermal barcodes....
Show moreMost of existing techniques cannot be used to detect molecular biomarkers (i.e., protein and DNA) contained in complex body fluids due to issues such as enzyme inhibition or signal interference. This thesis describes a nanoparticle-based thermal detection method for the highly sensitive detections of multiple DNA biomarkers or proteins contained in different type of fluids such as buffer solution, cell lysate and milk by using solid-liquid phase change nanoparticles as thermal barcodes. Besides, this method has also been applied for thrombin detection by using RNA aptamer-functionalized phase change nanoparticles as thermal probes. Furthermore, using nanostructured Si surface that have higher specific area can enhance the detection sensitivity by four times compared to use flat aluminum surfaces. The detection is based on the principle that the temperature of solid will not rise above its melting temperature unless all solid is molten, thus nanoparticles will have sharp melting peak during a linear thermal scan process. A one-to-one correspondence can be created between one type of nanoparticles and one type of biomarker, and multiple biomarkers can be detected simultaneously using different type nanoparticles. The melting temperature and the heat flow reflect the type and the concentration of biomarker, respectively. The melting temperatures of nanoparticles are designed to be over 100°C to avoid interference from species contained in fluids. The use of thermal nanoparticles allows detection of multiple low concentration DNAs or proteins in a complex fluid such as cell lysate regardless of the color, salt concentration, and conductivity of the sample.
Show less - Date Issued
- 2010
- Identifier
- CFE0003330, ucf:48473
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0003330
- Title
- ENCAPSULATED NANOSTRUCTURED PHASE CHANGE MATERIALS FOR THERMAL MANAGEMENT.
- Creator
-
Hong, Yan, Su, Ming, University of Central Florida
- Abstract / Description
-
A major challenge of developing faster and smaller microelectronic devices is that high flux of heat needs to be removed efficiently to prevent overheating of devices. The conventional way of heat removal using liquid reaches a limit due to low thermal conductivity and limited heat capacity of fluids. Adding solid nanoparticles into fluids has been proposed as a way to enhance thermal conductivity of fluids, but recent results show inconclusive anomalous enhancements in thermal conductivity....
Show moreA major challenge of developing faster and smaller microelectronic devices is that high flux of heat needs to be removed efficiently to prevent overheating of devices. The conventional way of heat removal using liquid reaches a limit due to low thermal conductivity and limited heat capacity of fluids. Adding solid nanoparticles into fluids has been proposed as a way to enhance thermal conductivity of fluids, but recent results show inconclusive anomalous enhancements in thermal conductivity. A possible way to improve heat transfer is to increase the heat capacity of liquid by adding phase change nanoparticles with large latent heat of fusion into the liquid. Such nanoparticles absorb heat during solid to liquid phase change. However, the colloidal suspension of bare phase change nanoparticles has limited use due to aggregation of molten nanoparticles, irreversible sticking on fluid channels, and dielectric property loss. This dissertation describes a new method to enhance the heat transfer property of a liquid by adding encapsulated phase change nanoparticles (nano-PCMs), which will absorb thermal energy during solid-liquid phase change and release heat during freeze. Specifically, silica encapsulated indium nanoparticles, and polymer encapsulated paraffin (wax) nanoparticles have been prepared using colloidal method, and dispersed into poly-±-olefin (PAO) and water for high temperature and low temperature applications, respectively. The shell, with a higher melting point than the core, can prevent leakage or agglomeration of molten cores, and preserve the dielectric properties of the base fluids. Compared to single phase fluids, heat transfer of nanoparticle-containing fluids have been significantly enhanced due to enhanced heat capacities. The structural integrity of encapsulation allows repeated uses of nanoparticles for many cycles. By forming porous semi crystalline silica shells obtained from water glass, supercooling has been greatly reduced due to low energy barrier of heterogeneous nucleation. Encapsulated phase change nanoparticles have also been added into exothermic reaction systems such as catalytic and polymerization reactions to effectively quench local hot spots, prevent thermal runaway, and change product distribution. Specifically, silica-encapsulated indium nanoparticles, and silica encapsulated paraffin (wax) nanoparticles have been used to absorb heat released in catalytic reaction, and to mitigate the gel effect during polymerization, respectively. The reaction rates do not raise significantly owing to thermal buffering using phase change nanoparticles at initial stage of thermal runaway. The effect of thermal buffering depends on latent heats of fusion of nanoparticles, and heat releasing kinetics of catalytic reactions and polymerizations. Micro/nanoparticles of phase change materials will open a new dimension for thermal management of exothermic reactions.
Show less - Date Issued
- 2011
- Identifier
- CFE0003698, ucf:48816
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0003698
- Title
- Photochemistry and Applications of Diels-Alder Adducts and Photoacids in Materials Science.
- Creator
-
Johns, Valentine, Liao, Yi, Miles, Delbert, Zou, Shengli, Gesquiere, Andre, Su, Ming, University of Central Florida
- Abstract / Description
-
Utilizing light as an energy source for reactions has intrigued many chemists. This has led to the development of the principles of photochemistry. The Photo retro Diels Alder (PrDA) reaction is one such system that has potential for use in materials science as well as in the life sciences. However, there was no guide to predict whether a compound could undergo the PrDA reaction, which limits the widespread use of this reaction. Another system is that of photoacids (molecules that release...
Show moreUtilizing light as an energy source for reactions has intrigued many chemists. This has led to the development of the principles of photochemistry. The Photo retro Diels Alder (PrDA) reaction is one such system that has potential for use in materials science as well as in the life sciences. However, there was no guide to predict whether a compound could undergo the PrDA reaction, which limits the widespread use of this reaction. Another system is that of photoacids (molecules that release protons upon irradiation reversibly). Since most fundamental processes involve proton transfer, these types of photoacids have great potential which is yet to be explored. This thesis describes the design and synthesis of various aromatic DA adducts. These adducts were made to undergo the rDA reaction using UV (Ultra-Violet) light. Experimental results showed that the photoreactivity of these adducts depends on the electron-donating ability of the diene component and the electron-withdrawing ability of the dienophile component. In addition, mechanistic study of this reaction revealed the formation of a charge separated intermediate with a singlet excited state. The potential of the PrDA reaction was also explored in two ways. One was by designing isomeric DA adducts from pentacene and TCNE (tetracyanoethylene) which are capable of switching from one isomer to another via a PrDA process. The other way was the design and synthesis of a polymer with an anthracene diketone moeity which could undergo a PrDA reaction to change from an insulator to a semiconductor. Finally, the syntheses of a number of photoacids which not only become acidic upon irradiation but also respond to visible light reversibly have been explored. A rationale has been developed for the design of photoacids with desired photo-induced response. While electron donating and accepting groups in strategic positions help tune the pH; using different combinations of ethanol and water affect the rate of the forward and the backward processes. A photoacid monomer was also incorporated into three photoacid polymers which respond to visible light reversibly, hence promising widespread applications of these photoacids.
Show less - Date Issued
- 2012
- Identifier
- CFE0004556, ucf:49235
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0004556
- Title
- X-ray Radiation Enabled Cancer Detection and Treatment with Nanoparticles.
- Creator
-
Hossain, Mainul, Su, Ming, Behal, Aman, Gong, Xun, Hu, Haiyan, Kapoor, Vikram, Deng, Weiwei, University of Central Florida
- Abstract / Description
-
Despite significant improvements in medical sciences over the last decade, cancer still continues to be a major cause of death in humans throughout the world. Parallel to the efforts of understanding the intricacies of cancer biology, researchers are continuously striving to develop effective cancer detection and treatment strategies. Use of nanotechnology in the modern era opens up a wide range of possibilities for diagnostics, therapies and preventive measures for cancer management....
Show moreDespite significant improvements in medical sciences over the last decade, cancer still continues to be a major cause of death in humans throughout the world. Parallel to the efforts of understanding the intricacies of cancer biology, researchers are continuously striving to develop effective cancer detection and treatment strategies. Use of nanotechnology in the modern era opens up a wide range of possibilities for diagnostics, therapies and preventive measures for cancer management. Although, existing strategies of cancer detection and treatment, using nanoparticles, have been proven successful in case of cancer imaging and targeted drug deliveries, they are often limited by poor sensitivity, lack of specificity, complex sample preparation efforts and inherent toxicities associated with the nanoparticles, especially in case of in-vivo applications. Moreover, the detection of cancer is not necessarily integrated with treatment. X-rays have long been used in radiation therapy to kill cancer cells and also for imaging tumors inside the body using nanoparticles as contrast agents. However, X-rays, in combination with nanoparticles, can also be used for cancer diagnosis by detecting cancer biomarkers and circulating tumor cells. Moreover, the use of nanoparticles can also enhance the efficacy of X-ray radiation therapy for cancer treatment.This dissertation describes a novel in vitro technique for cancer detection and treatment using X-ray radiation and nanoparticles. Surfaces of synthesized metallic nanoparticles have been modified with appropriate ligands to specifically target cancer cells and biomarkers in vitro. Characteristic X-ray fluorescence signals from the X-ray irradiated nanoparticles are then used for detecting the presence of cancer. The method enables simultaneous detection of multiple cancer biomarkers allowing accurate diagnosis and early detection of cancer. Circulating tumor cells, which are the primary indicators of cancer metastasis, have also been detected where the use of magnetic nanoparticles allows enrichment of rare cancer cells prior to detection. The approach is unique in that it integrates cancer detection and treatment under one platform, since, X-rays have been shown to effectively kill cancer cells through radiation induced DNA damage. Due to high penetrating power of X-rays, the method has potential applications for in vivo detection and treatment of deeply buried cancers in humans. The effect of nanoparticle toxicity on multiple cell types has been investigated using conventional cytotoxicity assays for both unmodified nanoparticles as well as nanoparticles modified with a variety of surface coatings. Appropriate surface modifications have significantly reduced inherent toxicity of nanoparticles, providing possibilities for future clinical applications. To investigate cellular damages caused by X-ray radiation, an on-chip biodosimeter has been fabricated based on three dimensional microtissues which allows direct monitoring of responses to X-ray exposure for multiple mammalian cell types. Damage to tumor cells caused by X-rays is known to be significantly higher in presence of nanoparticles which act as radiosensitizers and enhance localized radiation doses. An analytical approach is used to investigate the various parameters that affect the radiosensitizing properties of the nanoparticles. The results can be used to increase the efficacy of nanoparticle aided X-ray radiation therapy for cancer treatment by appropriate choice of X-ray beam energy, nanoparticle size, material composition and location of nanoparticle with respect to the tumor cell nucleus.
Show less - Date Issued
- 2012
- Identifier
- CFE0004547, ucf:49242
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0004547
- Title
- Multiscale simulation of laser ablation and processing of semiconductor materials.
- Creator
-
Shokeen, Lalit, Schelling, Patrick, Kar, Aravinda, Vaidyanathan, Rajan, Su, Ming, Kara, Abdelkader, University of Central Florida
- Abstract / Description
-
We present a multiscale model of laser-solid interactions in silicon based on an empirical potential developed under conditions of strong electronic excitations. The parameters of the interatomic potential depends on the temperature of the electronic subsystem Te, which is directly related to the density of the electron-hole pairs and hence the number of broken bonds. We analyze the dynamics of this potential as a function of electronic temperature Te and lattice temperature Tion. The...
Show moreWe present a multiscale model of laser-solid interactions in silicon based on an empirical potential developed under conditions of strong electronic excitations. The parameters of the interatomic potential depends on the temperature of the electronic subsystem Te, which is directly related to the density of the electron-hole pairs and hence the number of broken bonds. We analyze the dynamics of this potential as a function of electronic temperature Te and lattice temperature Tion. The potential predicts phonon spectra in good agreement with finite-temperature density-functional theory (DFT), including the lattice instability induced by the high electronic excitations. For 25fs pulse, a wide range of fluence values is simulated resulting in heterogeneous melting, homogenous melting, and ablation. The results presented demonstrate that phase transitions can usually be described by ordinary thermal processes even when the electronic temperature Te is much greater than the lattice temperature TL during the transition. However, the evolution of the system and details of the phase transitions depend strongly on Te and corresponding density of broken bonds. For high enough laser fluence, homogeneous melting is followed by rapid expansion of the superheated liquid and ablation. Rapid expansion of the superheated liquid occurs partly due to the high pressures generated by a high density of broken bonds. As a result, the system is readily driven into the liquid-vapor coexistence region, which initiates phase explosion. The results strongly indicates that phase explosion, generally thought of as an ordinary thermal process, can occur even under strong non-equilibrium conditions when Te (>)(>)TL. In summary, a detailed investigation of laser-solid interactions in silicon is presented for femtosecond laser pulse that yields strong far-from-equilibrium conditions.
Show less - Date Issued
- 2012
- Identifier
- CFE0004599, ucf:49206
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0004599
- Title
- Processing, Characterization and Performance of Carbon Nanopaper Based Multifunctional Nanocomposites.
- Creator
-
Liang, Fei, Gou, Jihua, Su, Ming, Fang, Jiyu, Orlovskaya, Nina, Xu, Yunjun, University of Central Florida
- Abstract / Description
-
Carbon nanofibers (CNFs) used as nano-scale reinforcement have been extensively studied since they are capable of improving the physical and mechanical properties of conventional fiber reinforced polymer composites. However, the properties of CNFs are far away from being fully utilized in the composites due to processing challenges including the dispersion of CNFs and the viscosity increase of polymer matrix. To overcome these issues, a unique approach was developed by making carbon nanopaper...
Show moreCarbon nanofibers (CNFs) used as nano-scale reinforcement have been extensively studied since they are capable of improving the physical and mechanical properties of conventional fiber reinforced polymer composites. However, the properties of CNFs are far away from being fully utilized in the composites due to processing challenges including the dispersion of CNFs and the viscosity increase of polymer matrix. To overcome these issues, a unique approach was developed by making carbon nanopaper sheet through the filtration of well-dispersed carbon nanofibers under controlled processing conditions, and integrating carbon nanopaper sheets into composite laminates using autoclave process and resin transfer molding (RTM). This research aims to fundamentally study the processing-structure-property-performance relationship of carbon nanopaper-based nanocomposites multifunctional applications: a) Vibrational damping. Carbon nanofibers with extremely high aspect ratios and low density present an ideal candidate as vibrational damping material; specifically, the large specific area and aspect ratio of carbon nanofibers promote significant interfacial friction between carbon nanofiber and polymer matrix, causing higher energy dissipation in the matrix. Polymer composites with the reinforcement of carbon nanofibers in the form of a paper sheet have shown significant vibration damping improvement with a damping ratio increase of 300% in the nanocomposites. b) Wear resistance. In response to the observed increase in toughness of the nanocomposites, tribological properties of the nanocomposite coated with carbon nanofiber/ceramic particles hybrid paper have been studied. Due to high strength and toughness, carbon nanofibers can act as microcrack reducer; additionally, the composites coated with such hybrid nanopaper of carbon nanofiber and ceramic particles shown an improvement of reducing coefficient of friction (COF) and wear rate. c) High electrical conductivity. A highly conductive coating material was developed and applied on the surface of the composites for the electromagnetic interference shielding and lightning strike protection. To increase the conductivity of the carbon nanofiber paper, carbon nanofibers were modified with nickel nanostrands. d) Electrical actuation of SMP composites. Compared with other methods of SMP actuation, the use of electricity to induce the shape-memory effect of SMP is desirable due to the controllability and effectiveness. The electrical conductivity of carbon fiber reinforced SMP composites can be significantly improved by incorporating CNFs and CNF paper into them. A vision-based system was designed to control the deflection angle of SMP composites to desired values. The funding support from National Science Foundation and FAA Center of Excellence for Commercial Space Transportation (FAA COE CST) is acknowledged.
Show less - Date Issued
- 2012
- Identifier
- CFE0004569, ucf:49194
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0004569
- Title
- Thermally annealled plasmonic nanostructures.
- Creator
-
Wang, Chaoming, Su, Ming, Coffey, Kevin, Chai, Xinqing, Schelling, Patrick, University of Central Florida
- Abstract / Description
-
Localized surface plasmon resonance (LSPR) is induced in metal nanoparticles by resonance between incident photons and conduction electrons in nanoparticles. For noble metal nanoparticles, LSPR can lead to strong absorbance of ultraviolet-violet light. Although it is well known that LSPR depends on the size and shape of nanoparticles, the inter-particle spacing, the dielectric properties of metal and the surrounding medium, the temperature dependence of LSPR is not well understood. By...
Show moreLocalized surface plasmon resonance (LSPR) is induced in metal nanoparticles by resonance between incident photons and conduction electrons in nanoparticles. For noble metal nanoparticles, LSPR can lead to strong absorbance of ultraviolet-violet light. Although it is well known that LSPR depends on the size and shape of nanoparticles, the inter-particle spacing, the dielectric properties of metal and the surrounding medium, the temperature dependence of LSPR is not well understood. By thermally annealing gold nanoparticle arrays formed by nanosphere lithography, a shift of LSPR peak upon heating has been shown. The thermal characteristics of the plasmonic nanoparticles have been further used to detect chemicals such as explosive and mercury vapors, which allow direct visual observation of the presence of mercury vapor, as well as thermal desorption measurements.
Show less - Date Issued
- 2012
- Identifier
- CFE0004454, ucf:49322
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0004454
- Title
- Electrical, Optical and Chemical Properties of Organic Photo Sensitve Materials.
- Creator
-
Shi, Zheng, Liao, Yi, Kolpashchikov, Dmitry, Ye, Jingdong, Zou, Shengli, Su, Ming, University of Central Florida
- Abstract / Description
-
Light as a (")green(") source of energy has become increasingly attractive throughout the past century and has shown versatility for the application of activating chemical reactions. Compared with traditional energy sources, it provides a more direct, selective and controllable method. My PhD study was focused on the study of photochemistry of organic materials in two different systems. The first system is regarding reversible photoacids which generate protons on irradiation. With the aim of...
Show moreLight as a (")green(") source of energy has become increasingly attractive throughout the past century and has shown versatility for the application of activating chemical reactions. Compared with traditional energy sources, it provides a more direct, selective and controllable method. My PhD study was focused on the study of photochemistry of organic materials in two different systems. The first system is regarding reversible photoacids which generate protons on irradiation. With the aim of systematically studying these novel types of long lived photoacids, a series of photoacids was designed, synthesized and whose chemical mechanism was thoroughly investigated. This type of photoacid changes from a weak acid to a strong acid with a pH change of several units, which achieves nearly complete proton dissociation upon visible light irradiation. The whole process is reversible and the half-life of the proton-dissociation state is long enough to be used in many applications. Besides fundamental studies, different applications based on this type of photoacids were also completed. An esterification reaction was catalyzed and the volume of a pH-sensitive polymer was altered due to the large amount of photo generated protons from this photoacid. A reversible electrical conductivity change of polyaniline (PANI) was also achieved by doping with this reversible photoacid. In order to induce a large conductivity increase, an irreversible photoacid generator (PAG) was embedded in a novel PANI/PAG/PVA novel composition. In this system, Poly (vinyl alcohol) (PVA) forms a hydrogen-bonding network to facilitate proton transfer between the PAG and PANI. A final electrical conductivity of 10-1 S cm-1 was successfully achieved after irradiation. The second system in which I explored photochemistry of organic molecules concerns Photo-retro-Diels-Alder (PrDA) reactions and a variety of Diels-Alder (DA) adducts were designed for these studies. UV light was used to trigger the retro-Diels-Alder reactions. Quantum yield of each DA adducts was investigated. This revealed that the photo-reactivity of this process depends on the electron-donating ability of the diene and the electron-withdrawing ability of the dienophile component. Mechanistic studies of this PrDA reaction reveal that a charge-separated intermediate is generated from a singlet excited state. This was applied to an unsaturated cyclic ?-diketones (DKs), which underwent PrDA reactions and generated anthracene derivatives and carbon monoxide (CO), which itself plays profound and important roles in biological systems. These unsaturated cyclic ?-diketones (DKs) encapsulated in micelles are effective CO-releasing molecules (CORMs) and are capable of carrying and releasing CO in cellular systems. This novel type of organic CORMs has potentially low toxicity and generates fluorescence, which provides a useful tool for the study of the biological functions of CO.
Show less - Date Issued
- 2013
- Identifier
- CFE0005114, ucf:50748
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0005114
- Title
- Novel optical properties of metal nanostructures based on surface plasmons.
- Creator
-
Wang, Haining, Zou, Shengli, Liao, Yi, Kolpashchikov, Dmitry, Gesquiere, Andre, Su, Ming, University of Central Florida
- Abstract / Description
-
Surface plasmons have been attracted extensive interests in recent decades due to the novel properties in nanometer sized dimensions. My work focused on the novel optical properties of metal nanostructures based on surface plasmons using theoretical simulation methods. In the first part, we investigated metal nanofilms and nanorods and demonstrated that extremely low scattering efficiency, high absorption efficiency and propagation with long distance could be obtained by different metal...
Show moreSurface plasmons have been attracted extensive interests in recent decades due to the novel properties in nanometer sized dimensions. My work focused on the novel optical properties of metal nanostructures based on surface plasmons using theoretical simulation methods. In the first part, we investigated metal nanofilms and nanorods and demonstrated that extremely low scattering efficiency, high absorption efficiency and propagation with long distance could be obtained by different metal nanostructures. With a perforated silver film, we demonstrated that an extremely low scattering cross section with an efficiency of less than 1% can be achieved at tunable wavelengths with tunable widths. The resonance wavelength, width, and intensity are influenced by the shape, size and arrangement pattern of the holes, as well as the distance separating the holes along the polarization direction. The extremely low scattering could be used to obtain high absorption efficiency of a two-layer silver nanofilm. Using the discrete dipole approximation method, we achieved enhanced absorption efficiencies, which are close to 100%, at tunable wavelengths in a two-layer silver thin film. The film is composed of a 100 nm thick perforated layer facing the incident light and a 100 nm thick solid layer. Resonance wavelengths are determined by the distances between perforated holes in the first layer as well as the separation between two layers. The resonance wavelengths shift to red with increasing separation distance between two layers or the periodic distance of the hole arrays. Geometries of conical frustum shaped holes in the first layer are critical for the improved absorption efficiencies. When the hole bottom diameter equals the periodic distance and the upper diameter is about one-third of the bottom diameter, close to unit absorption efficiency can be obtained. We examined the electromagnetic wave propagation along a hollow silver nanorod with subwavelength dimensions. The calculations show that light may propagate along the hollow nanorod with growing intensities. The influences of the shape, dimension, and length of the rod on the resonance wavelength and the enhanced local electric field, |E|2, along the rod were investigated. In the second part, a generalized electrodynamics model is proposed to describe the enhancement and quenching of fluorescence signal of a dye molecule placed near a metal nanoparticle (NP). Both the size of the Au NPs and quantum yield of the dye molecule are crucial in determining the emission intensity of the molecule. Changing the size of the metal NP will alter the ratio of the scattering and absorption efficiencies of the metal NP and consequently result in different enhancement or quenching effect to the dye molecule. A dye molecule with a reduced quantum yield indicates that the non-radiative channel is dominant in the decay of the excited dye molecules and the amplification of the radiative decay rate will be easier. In general, the emission intensity will be quenched when the size of metal NP is small and the quantum yield of dye molecule is about unity. A significant enhancement factor will be obtained when the quantum yield of the molecule is small and the particle size is large. When the quantum yield of the dye molecule is less than 10-5, the model is simplified to the surface enhanced Raman scattering equation.
Show less - Date Issued
- 2013
- Identifier
- CFE0004769, ucf:49786
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0004769
