Current Search:   Gate dielectrics (x)

View All Items

  • CSV Spreadsheet
(1 - 2 of 2)
INVESTIGATION OF HIGH-K GATE DIELECTRICS AND METALS FOR MOSFET DEVICES.
Title
INVESTIGATION OF HIGH-K GATE DIELECTRICS AND METALS FOR MOSFET DEVICES.
Creator
Seshadri, Sriram, Sundaram, Kalpathy, University of Central Florida
Abstract / Description
Progress in advanced microlithography and deposition techniques have made feasible high- k dielectric materials for MOS transistors. The continued scaling of CMOS devices is pushing the Si-SiO2 to its limit to consider high-k gate dielectrics. The demand for faster, low power, smaller, less expensive devices with good functionality and higher performance increases the demand for high-k dielectric based MOS devices. This thesis gives an in-depth study of threshold voltages of PMOS and NMOS...
Show moreProgress in advanced microlithography and deposition techniques have made feasible high- k dielectric materials for MOS transistors. The continued scaling of CMOS devices is pushing the Si-SiO2 to its limit to consider high-k gate dielectrics. The demand for faster, low power, smaller, less expensive devices with good functionality and higher performance increases the demand for high-k dielectric based MOS devices. This thesis gives an in-depth study of threshold voltages of PMOS and NMOS transistors using various high-k dielectric materials like Tantalum pent oxide (Ta2O5), Hafnium oxide (HfO2), Zirconium oxide (ZrO2) and Aluminum oxide (Al2O3) gate oxides. Higher dielectric constant may lead to high oxide capacitance (Cox), which affects the threshold voltage (VT) of the device. The working potential of MOS devices can be increased by high dielectric gate oxide and work function of gate metal which may also influence the threshold voltage (VT). High dielectric materials have low gate leakage current, high breakdown voltage and are thermally stable on Silicon Substrate (Si). Different kinds of deposition techniques for different gate oxides, gate metals and stability over silicon substrates are analyzed theoretically. The impact of the properties of gate oxides such as oxide thickness, interface trap charges, doping concentration on threshold voltage were simulated, plotted and studied. This study involved comparisons of oxides-oxides, metals-metals, and metals-oxides. Gate metals and alloys with work function of less than 5eV would be suitable candidates for aluminum oxide, hafnium oxide etc. based MOSFETs.
Show less
Date Issued
2005
Identifier
CFE0000667, ucf:46549
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0000667
Investigation of different dielectric materials as gate insulator for MOSFETs
Title
Investigation of different dielectric materials as gate insulator for MOSFETs.
Creator
Oswal, Ritika, Sundaram, Kalpathy, Kapoor, Vikram, Wahid, Parveen, University of Central Florida
Abstract / Description
The scaling of semiconductor transistors has led to a decrease in thickness of the silicon dioxide layer used as gate dielectric. The thickness of the silicon dioxide layer is reduced to increase the gate capacitance, thus increasing the drain current. If the thickness of the gate dielectric decreases below 2nm, the leakage current due to the tunneling increases drastically. Hence it is necessary to replace the gate dielectric, silicon dioxide, with a physically thicker oxide layer of high-k...
Show moreThe scaling of semiconductor transistors has led to a decrease in thickness of the silicon dioxide layer used as gate dielectric. The thickness of the silicon dioxide layer is reduced to increase the gate capacitance, thus increasing the drain current. If the thickness of the gate dielectric decreases below 2nm, the leakage current due to the tunneling increases drastically. Hence it is necessary to replace the gate dielectric, silicon dioxide, with a physically thicker oxide layer of high-k materials like Hafnium oxide and Titanium oxide. High-k dielectric materials allow the capacitance to increase without a huge leakage current. Hafnium oxide and Titanium oxide films are deposited by reactive magnetron sputtering from Hafnium and Titanium targets respectively. These oxide layers are used to create metal-insulator-metal (MIM) structures using aluminum as the top and bottom electrodes. The films are deposited at various O2/Ar gas flow ratios, substrate temperatures, and process pressures. After attaining an exact recipe for these oxide layers that exhibit the desired parameters, MOS capacitors are fabricated with n-Si and p-Si substrates having aluminum electrodes at the top and bottom of each. Comparing the parameters of Hafnium oxide- and Titanium oxide- based MOS capacitors, MOSFET devices are designed with Hafnium oxide as gate dielectric.
Show less
Date Issued
2014
Identifier
CFE0005226, ucf:50612
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0005226