View All Items
(1 - 3 of 3)
- Title
- ESTIMATION OF TANGENTIAL MOMENTUM ACCOMMODATION COEFFICIENT USING MOLECULAR DYNAMICS SIMULATION.
- Creator
-
Finger, George, Kapat, Jayanta, University of Central Florida
- Abstract / Description
-
The Tangential Momentum Accommodation Coefficient (TMAC) is used to improve the accuracy of fluid flow calculations in the slip flow regime. Under such conditions (indicated by Knudsen number greater than 0.001), the continuum assumption that a fluid velocity at a solid surface is equal to the surface velocity is inaccurate because relatively significant fluid "slip" occurs at the surface. Prior work has not led to a method to quickly estimate a value for TMAC - it is frequently assumed. In...
Show moreThe Tangential Momentum Accommodation Coefficient (TMAC) is used to improve the accuracy of fluid flow calculations in the slip flow regime. Under such conditions (indicated by Knudsen number greater than 0.001), the continuum assumption that a fluid velocity at a solid surface is equal to the surface velocity is inaccurate because relatively significant fluid "slip" occurs at the surface. Prior work has not led to a method to quickly estimate a value for TMAC - it is frequently assumed. In this work, Molecular Dynamics techniques are used to study the impacts of individual gas atoms upon solid surfaces to understand how approach velocity, crystal geometry and interatomic forces affect the scattering of the gas atoms, specifically from the perspective of tangential momentum. It is a logical step in the development of a comprehensive technique to estimate total coefficient values to be used by those investigating flows in micro- and nano-channels or on orbit spacecraft where slip flow occurs. TMAC can also help analysis in transitional or free molecular regimes of flow. The gas – solid impacts were modeled using Lennard Jones potentials. Solid surfaces were modeled with approximately 3 atoms wide by 3 atoms deep by 40 or more atoms long. The crystal surface was modeled as a Face Centered Cubic (100). The gas was modeled as individual free gas atoms. Gas approach angles were varied from 10° to 70° from normal. Gas speed was either specified directly or by way of a ratio relationship with the Lennard-Jones energy potential (Energy Ratio). In order to adequately model the trajectories and maintain conservation of energy, very small time steps (on the order of 0.0005 ô , where ô is the natural time unit) were used. For each impact the initial and final tangential momenta were determined and after a series of many impacts, a value of TMAC was calculated for those conditions. The modeling was validated with available experimental data for He gas atoms at 1770 m/s impacting Cu over angles ranging from 10° to 70°. The model agreed within 3% of the experimental values and correctly predicted that the coefficient changes with angle of approach. Molecular Dynamics results estimate TMAC values from a high of 1.2 to a low of 0.25, generally estimating a higher coefficient at the smaller angles. TMAC values above 1.0 indicate backscattering, which has been experimentally observed in numerous instances. The ratio of final to initial momenta, when plotted for a given sequence of gas atoms spaced across a lattice cycle typically follows a discontinuous curve, with continuous portions indicating forward and back scattering and discontinuous portions indicating multiple bounces. Increasing the Energy Ratio above a value of 5 tends to decrease the coefficient at all angles. Adsorbed layers atop a surface influence the coefficient similar to their Energy Ratio. The results provide encouragement to develop the model further, so as to be able in the future to evaluate TMAC for gas flows with Maxwell temperature distributions involving numerous impact angles simultaneously.
Show less - Date Issued
- 2005
- Identifier
- CFE0000760, ucf:46567
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0000760
- Title
- High power fiber lasers and fiber devices.
- Creator
-
Sanjabieznaveh, Zeinab, Amezcua Correa, Rodrigo, Chang, Zenghu, Argenti, Luca, Richardson, Martin, Schulzgen, Axel, University of Central Florida
- Abstract / Description
-
Fiber lasers and fiber amplifiers have experienced considerable improvements in recent years and demonstrated remarkable power scalability. However, due to high optical intensity in the core, the performance of high power fiber lasers is limited by detrimental nonlinear processes, such as four-wave mixing, self-phase modulation, stimulated Brillouin scattering, and stimulated Raman scattering. To mitigate nonlinear effects, very large mode area (LMA) fibers, which exhibit a mode field...
Show moreFiber lasers and fiber amplifiers have experienced considerable improvements in recent years and demonstrated remarkable power scalability. However, due to high optical intensity in the core, the performance of high power fiber lasers is limited by detrimental nonlinear processes, such as four-wave mixing, self-phase modulation, stimulated Brillouin scattering, and stimulated Raman scattering. To mitigate nonlinear effects, very large mode area (LMA) fibers, which exhibit a mode field diameter larger than 30 ?m have been developed. However, for larger core sizes the discrimination capabilities of conventional fiber designs decrease, consequently, LMA fibers are not strictly single mode which ultimately at high average powers results in sudden degradation of the output beam of a fiber laser or amplifier, namely, modal instability (MI). To suppress higher order modes (HOMs) in LMA fibers, various techniques have been proposed such as large pitch fibers (LPFs), differential bend loss for HOMs, leakage channel fibers, mode filtering with tapers, and chirally coupled cores. This thesis is divided into two parts. In the first two chapters, I focus on simulation, design and characterization of advanced high power fiber amplifiers. In the first chapter, I study the numerical modeling of the MI in active LMA fibers. Using a high fidelity time dependent computer model based on beam propagation method (BPM), taking laser gain and thermal effects into account, I show that engineering pump scheme is a promising technique leading to an appreciable threshold increase in a fiber amplifier. As an example I demonstrate that bi-directional pump scheme increases the instabilities threshold by a factor of ~30% with respect to the forward pump configuration. In the second chapter, I present a novel design of microstructured large pitch, LMA asymmetric rod-type fiber to achieve higher MI threshold. By eliminating mirror symmetries in the cladding of the LPF through six high refractive index germanium-doped silica inclusions, we reduce the overlap of the LP1m-like modes with the core region, which leads to strong HOM delocalization and enhanced preferential gain for the fundamental mode in active fibers. The third and fourth chapters of this thesis are focused on all-fiber mode multiplexers for communication applications. In the third chapter, I present an all-fiber mode selective photonic lantern mode multiplexer designed for launching into few-mode multicore fibers (FM-MCFs). This device is capable of selectively exciting LP01, LP11a and LP11b modes in a seven core configuration resulting in 21 spatial channels, with less than 38 dB crosstalk and with insertion loss below 0.4 dB. This device can be a critical component for the evolution of high capacity, high-density space division multiplexing (SDM) transmission networks based on MCFs.In the fourth chapter, I demonstrate for the first time, an all-fiber orbital angular momentum (OAM) mode multiplexer to efficiently generate and simultaneously multiplex multiple OAM modes within a broad spectral range of at least 550 nm. This innovative all-fiber passive design provides simultaneous multiplexing of multiple orthogonal OAM modes in a single fiber device with low loss and at low design complexity, therefore, it is of grand utility in variety of applications in classical and modern optical studies.
Show less - Date Issued
- 2017
- Identifier
- CFE0006956, ucf:51632
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0006956
- Title
- An Optimization of Thermodynamic Efficiency vs. Capacity for Communications Systems.
- Creator
-
Rawlins, Gregory, Wocjan, Pawel, Wahid, Parveen, Georgiopoulos, Michael, Jones, W Linwood, Mucciolo, Eduardo, University of Central Florida
- Abstract / Description
-
This work provides a fundamental view of the mechanisms which affect the power efficiency of communications processes along with a method for efficiency enhancement. Shannon's work is the definitive source for analyzing information capacity of a communications system but his formulation does not predict an efficiency relationship suitable for calculating the power consumption of a system, particularly for practical signals which may only approach the capacity limit. This work leverages...
Show moreThis work provides a fundamental view of the mechanisms which affect the power efficiency of communications processes along with a method for efficiency enhancement. Shannon's work is the definitive source for analyzing information capacity of a communications system but his formulation does not predict an efficiency relationship suitable for calculating the power consumption of a system, particularly for practical signals which may only approach the capacity limit. This work leverages Shannon's while providing additional insight through physical models which enable the calculation and improvement of efficiency for the encoding of signals. The proliferation of Mobile Communications platforms is challenging capacity of networks largely because of the ever increasing data rate at each node. This places significant power management demands on personal computing devices as well as cellular and WLAN terminals. The increased data throughput translates to shorter meantime between battery charging cycles and increased thermal footprint. Solutions are developed herein to counter this trend. Hardware was constructed to measure the efficiency of a prototypical Gaussian signal prior to efficiency enhancement. After an optimization was performed, the efficiency of the encoding apparatus increased from 3.125% to greater than 86% for a manageable investment of resources. Likewise several telecommunications standards based waveforms were also tested on the same hardware. The results reveal that the developed physical theories extrapolate in a very accurate manner to an electronics application, predicting the efficiency of single ended and differential encoding circuits before and after optimization.
Show less - Date Issued
- 2015
- Identifier
- CFE0006051, ucf:50994
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0006051
