Current Search:   multilayer (x)

View All Items

  • CSV Spreadsheet
(1 - 6 of 6)
THERMAL PERFORMANCE OF CRYOGENIC MULTILAYER INSULATION AT VARIOUS LAYER SPACINGS
Title
THERMAL PERFORMANCE OF CRYOGENIC MULTILAYER INSULATION AT VARIOUS LAYER SPACINGS.
Creator
Johnson, Wesley, Chow, Louis, University of Central Florida
Abstract / Description
Multilayer insulation (MLI) has been shown to be the best performing cryogenic insulation system at high vacuum (less than 10-3 torr), and is widely used on spaceflight vehicles. Over the past 50 years, many numerous investigations of MLI have yielded a general understanding of the many variables associated with MLI. MLI has been shown to be a function of variables such as warm boundary temperature, the number of reflector layers, and the spacer material in between reflectors, the...
Show moreMultilayer insulation (MLI) has been shown to be the best performing cryogenic insulation system at high vacuum (less than 10-3 torr), and is widely used on spaceflight vehicles. Over the past 50 years, many numerous investigations of MLI have yielded a general understanding of the many variables associated with MLI. MLI has been shown to be a function of variables such as warm boundary temperature, the number of reflector layers, and the spacer material in between reflectors, the interstitial gas pressure and the interstitial gas. Because conduction between reflectors increases with the thickness of the spacer material, and yet the radiation heat transfer is inversely proportional to the number of layers, it stands to reason that the thermal performance of MLI is a function of the number of layers per thickness, or layer density. Empirical equations that were derived based on some of the early tests showed that the conduction term was proportional to the layer density to a power. This power depended on the material combination and was determined by empirical test data. Many authors have graphically shown such optimal layer density, but none have provided any data at such low densities, or any method of determining this density. Keller, Cunnington, and Glassford showed MLI thermal performance as a function of layer density of high layer densities, but they didnÂÂ't show a minimal layer density or any data below the supposed optimal layer density. However, it was recently discovered by the author that by manipulating the derived empirical equations and taking a derivative with respect to layer density, a solution for on optimal layer density may be obtained. Several manufacturers have begun manufacturing MLI at densities below the analytical optimal density. This trend is apparently based on the theory that increased distance between layers lowers the conductive heat transfer and that there are no limitations on volume. By modifying the circumference of these blankets, the layer density can easily be varied. The most direct method of determining the thermal performance of MLI at cryogenic temperature is by evaporation (or ÂÂ"boil-offÂÂ") calorimetry. Several blankets were procured and tested at various layer densities by the Cryogenics Test Laboratory at NASA Kennedy Space Center. The blankets were tested over a wide range of layer densities including the analytical minimum. Several of the blankets were tested at the same insulation thickness while changing the layer density (thus a different number of reflector layers). Heat transfer optimization of the layer density of multilayer insulation systems would remove the variable of layer density from the complex method of designing such insulation systems. Since the layer density is one of the variables that in those complex equations that require more experience to understand fully grasp, this significantly simplifies the blanket design process. Additional testing was performed at various warm boundary temperatures and pressures. The testing and analysis was performed to determine thermal performance data and to simplify the analysis of cryogenic thermal insulation systems.
Show less
Date Issued
2010
Identifier
CFE0003419, ucf:48400
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0003419
SPECTROSCOPIC STUDIES OF LASER PLASMAS FOR EUV SOURCES
Title
SPECTROSCOPIC STUDIES OF LASER PLASMAS FOR EUV SOURCES.
Creator
George, Simi, Richardson, Martin, University of Central Florida
Abstract / Description
With the availability of high reflectivity multilayer mirrors and zone plate lenses, the EUV region (5nm - 40nm) of the electromagnetic spectrum is currently being explored for applications of nanoscale printing and imaging. Advances made in this area have consequences for many areas of science. Research for producing a compact, bright EUV source for laboratory use has gained momentum in recent years. For this study, EUV radiation is produced by irradiating target materials using a focused...
Show moreWith the availability of high reflectivity multilayer mirrors and zone plate lenses, the EUV region (5nm - 40nm) of the electromagnetic spectrum is currently being explored for applications of nanoscale printing and imaging. Advances made in this area have consequences for many areas of science. Research for producing a compact, bright EUV source for laboratory use has gained momentum in recent years. For this study, EUV radiation is produced by irradiating target materials using a focused laser beam. Focused laser beam ionizes the target to create a hot, dense, pulsed plasma source, where emission is a result of the relaxation of excited levels. Spectroscopy is used as the main diagnostic to obtain the spectral signature of the plasma. Spectral characteristics are used to deduce the physical state of plasma, thus enabling the tuning of laser irradiance conditions to maximize the needed emission bandwidth. Various target materials are studied, as well as different target geometries, with spectroscopy below 200 nm on pulsed micro-plasmas being a particularly daunting task. Total range spectroscopy from 1 nm to greater than 1 micron is completed for tin-doped spherical droplet plasma source. Reliable plasma diagnostics require both accurate measurements and solid theoretical support in order to interpret the experimental results. Using existing 1D-hydrocode, temperature and density characteristics of the expanding plasma is simulated for any set of experimental conditions. Existing atomic codes written for calculating one-electron radial wavefunctions with LS-coupling scheme via Hartree-Fock method is used in order to gain details of the ion stages, populations, transitions, etc, contributing to the spectral data.
Show less
Date Issued
2007
Identifier
CFE0001972, ucf:47433
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0001972
N MULTILAYER THIN FILM REACTIONS TO FORM L10 FEPT AND EXCHANGE SPRING MAGNETS
Title
N MULTILAYER THIN FILM REACTIONS TO FORM L10 FEPT AND EXCHANGE SPRING MAGNETS.
Creator
Yao, Bo, Coffey, Kevin, University of Central Florida
Abstract / Description
FePt films with the L10 phase have potential applications for magnetic recording and permanent magnets due to its high magnetocrystalline anisotropy energy density. Heat treatment of n multilayer films is one approach to form the L10 FePt phase through a solid state reaction. This thesis has studied the diffusion and reaction of n multilayer films to form the L10 FePt phase and has used this understanding to construct exchange spring magnets. The process-structure-property relations of n...
Show moreFePt films with the L10 phase have potential applications for magnetic recording and permanent magnets due to its high magnetocrystalline anisotropy energy density. Heat treatment of n multilayer films is one approach to form the L10 FePt phase through a solid state reaction. This thesis has studied the diffusion and reaction of n multilayer films to form the L10 FePt phase and has used this understanding to construct exchange spring magnets. The process-structure-property relations of n multilayer films were systematically examined. The transmission electron microscopy (TEM) study of the annealed multilayers indicates that the Pt layer grows at the expense of Fe during annealing, forming a disordered fcc FePt phase by the interdiffusion of Fe into Pt. This thickening of the fcc Pt layer can be attributed to the higher solubilities of Fe into fcc Pt, as compared to the converse. For the range of film thickness studied, a continuous L10 FePt product layer that then thickens with further annealing is not found. Instead, the initial L10 FePt grains are distributed mainly on the grain boundaries within the fcc FePt layer and at the Fe/Pt interfaces and further transformation of the sample to the ordered L10 FePt phase proceeds coupled with the growth of the initial L10 FePt grains. A comprehensive study of annealed n films is provided concerning the phase fraction, grain size, nucleation/grain density, interdiffusivity, long-range order parameter, and texture, as well as magnetic properties. A method based on hollow cone dark field TEM is introduced to measure the volume fraction, grain size, and density of ordered L10 FePt phase grains in the annealed films, and low-angle X-ray diffraction is used to measure the effective Fe-Pt interdiffusivity. The process-structure-properties relations of two groups of samples with varying substrate temperature and periodicity are reported. The results demonstrate that the processing parameters (substrate temperature, periodicity) have a strong influence on the structure (effective interdiffusivity, L10 phase volume fraction, grain size, and density) and magnetic properties. The correlation of these parameters suggests that the annealed n multilayer films have limited nuclei, and the subsequent growth of L10 phase is very important to the extent of ordered phase formed. A correlation between the grain size of fcc FePt phase, grain size of the L10 FePt phase, the L10 FePt phase fraction, and magnetic properties strongly suggests that the phase transformation of fccL10 is highly dependent on the grain size of the parent fcc FePt phase. A selective phase growth model is proposed to explain the phenomena observed. An investigation of the influence of total film thickness on the phase formation of the L10 FePt phase in n multilayer films and a comparison of this to that of FePt co-deposited alloy films is also conducted. A general trend of greater L10 phase formation in thicker films was observed in both types of films. It was further found that the thickness dependence of the structure and of the magnetic properties in n multilayer films is much stronger than that in FePt alloy films. This is related to the greater chemical energy contained in n films than FePt alloy films, which is helpful for the L10 FePt phase growth. However, the initial nucleation temperature of n multilayers and co-deposited alloy films was found to be similar. An investigation of L10 FePt-based exchange spring magnets is presented based on our understanding of the L10 formation in n multilayer films. It is known that exchange coupling is an interfacial magnetic interaction and it was experimentally shown that this interaction is limited to within several nanometers of the interface. A higher degree of order of the hard phase is shown to increase the length scale slightly. Two approaches can be used to construct the magnets. For samples with composition close to stoichiometric L10 FePt, the achievement of higher energy product is limited by the average saturation magnetization, and therefore, a lower annealing temperature is beneficial to increase the energy product, allowing a larger fraction of disordered phase. For samples with higher Fe concentration, the (BH)max is limited by the low coercivity of annealed sample, and a higher annealing temperature is beneficial to increase the energy product.
Show less
Date Issued
2008
Identifier
CFE0002416, ucf:47749
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0002416
APPLICATION OF POLYELECTROLYTE MULTILAYERS FOR PHOTOLITHOGRAPHIC PATTERNING OF DIVERSE MAMMALIAN CELL TYPES IN SERUM FREE MEDIUM
Title
APPLICATION OF POLYELECTROLYTE MULTILAYERS FOR PHOTOLITHOGRAPHIC PATTERNING OF DIVERSE MAMMALIAN CELL TYPES IN SERUM FREE MEDIUM.
Creator
Dhir, Vipra, Cho, Hyoung Jin, University of Central Florida
Abstract / Description
Integration of living cells with novel microdevices requires the development of innovative technologies for manipulating cells. Chemical surface patterning has been proven as an effective method to control the attachment and growth of diverse cell populations. Patterning polyelectrolyte multilayers through the combination of layer-by-layer self-assembly technique and photolithography offers a simple, versatile and silicon compatible approach that overcomes chemical surface patterning...
Show moreIntegration of living cells with novel microdevices requires the development of innovative technologies for manipulating cells. Chemical surface patterning has been proven as an effective method to control the attachment and growth of diverse cell populations. Patterning polyelectrolyte multilayers through the combination of layer-by-layer self-assembly technique and photolithography offers a simple, versatile and silicon compatible approach that overcomes chemical surface patterning limitations, such as short-term stability and low protein adsorption resistance. In this study, direct photolithographic patterning of PAA/PAAm and PAA/PAH polyelectrolyte multilayers was developed to pattern mammalian neuronal, skeletal and cardiac muscle cells. For all studied cell types, PAA/PAAm multilayers behaved as a negative surface, completely preventing cell attachment. In contrast, PAA/PAH multilayers have shown a cell-selective behavior, promoting the attachment and growth of neuronal cells (embryonic rat hippocampal and NG108-15 cells) to a greater extent, while providing a little attachment for neonatal rat cardiac and skeletal muscle cells (C2C12 cell line). PAA/PAAm multilayer cellular patterns have also shown a remarkable protein adsorption resistance. Protein adsorption protocols commonly used for surface treatment in cell culture did not compromise the cell attachment inhibiting feature of the PAA/PAAm multilayer patterns. The combination of polyelectrolyte multilayer patterns with different adsorbed proteins could expand the applicability of this technology to cell types that require specific proteins either on the surface or in the medium for attachment or differentiation, and could not be patterned using the traditional methods.
Show less
Date Issued
2008
Identifier
CFE0002357, ucf:47783
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0002357
Broadband Coherent Perfect Absorption in One-Dimensional Optical Systems
Title
Broadband Coherent Perfect Absorption in One-Dimensional Optical Systems.
Creator
Villinger, Massimo Maximilian, Abouraddy, Ayman, Dogariu, Aristide, Fathpour, Sasan, University of Central Florida
Abstract / Description
Absorption plays a critical role in a variety of optical applications (-) sometimes it is desirable to minimize it as in optical fibers and waveguides, or to enhance it as in solar cells and photodetectors. We describe here a new optical scheme that controllably produces high optical absorption over a broad wavelength range (hundreds of nm) in systems that have low intrinsic absorption over the same range. This effect, 'coherent perfect absorption' or CPA, arises from a subtle interplay...
Show moreAbsorption plays a critical role in a variety of optical applications (-) sometimes it is desirable to minimize it as in optical fibers and waveguides, or to enhance it as in solar cells and photodetectors. We describe here a new optical scheme that controllably produces high optical absorption over a broad wavelength range (hundreds of nm) in systems that have low intrinsic absorption over the same range. This effect, 'coherent perfect absorption' or CPA, arises from a subtle interplay between interference and absorption of two beams incident on a weakly absorbing medium. In the first part of this study, we present an analytical model that captures the relevant physics of CPA in one-dimensional photonic structures. This model elucidates an absorption-mediated interference effect that underlies CPA (-) an effect that is normally forbidden in Hermitian systems, but is allowed when conservation of energy is violated due to the inclusion of loss. As a concrete example, we consider a Fabry-P(&)#233;rot resonator containing a lossy dielectric and confirm this model through a computational study of a 1-micron-thick silicon layer in a cavity formed of dispersive mirrors with aperiodic multilayer design. We confirm that one may achieve 100% absorption in this thin silicon layer (whose intrinsic absorption is only ~ 3%) in the near-infrared. We then design two device models using few-micron-thick aperiodic planar dielectric mirrors and demonstrate (computationally, as well as experimentally) spectrally flat, coherently enhanced absorption at the theoretical limit in a 2-micron-thick film of polycrystalline silicon embedded in symmetric and asymmetric cavities. This coherent effect is observed over an octave-spanning wavelength range of ~800 (-) 1600 nm utilizing incoherent light in the near-infrared, exploiting mirrors that have wavelength-dependent reflectivity devised to counterbalance the decline in silicon's intrinsic absorption at long wavelengths. We anticipate that the design principles established here may be extended to other materials, broader spectral ranges, and large surface areas. Finally, we study the effect of the angle of incidence on CPA in planar structures. The results of this study point to a path for realizing CPA in such systems continuously over large bandwidths.
Show less
Date Issued
2015
Identifier
CFE0006059, ucf:50985
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0006059
MONTE CARLO SIMULATION OF HOLE TRANSPORT AND TERAHERTZ AMPLIFICATION IN MULTILAYER DELTA DOPED SEMICONDUCTOR STRUCTURES
Title
MONTE CARLO SIMULATION OF HOLE TRANSPORT AND TERAHERTZ AMPLIFICATION IN MULTILAYER DELTA DOPED SEMICONDUCTOR STRUCTURES.
Creator
Dolguikh, Maxim, Peale, Robert, University of Central Florida
Abstract / Description
Monte Carlo method for the simulation of hole dynamics in degenerate valence subbands of cubic semiconductors is developed. All possible intra- and inter-subband scattering rates are theoretically calculated for Ge, Si, and GaAs. A far-infrared laser concept based on intersubband transitions of holes in p-type periodically delta-doped semiconductor films is studied using numerical Monte-Carlo simulation of hot hole dynamics. The considered device consists of monocrystalline pure Ge layers...
Show moreMonte Carlo method for the simulation of hole dynamics in degenerate valence subbands of cubic semiconductors is developed. All possible intra- and inter-subband scattering rates are theoretically calculated for Ge, Si, and GaAs. A far-infrared laser concept based on intersubband transitions of holes in p-type periodically delta-doped semiconductor films is studied using numerical Monte-Carlo simulation of hot hole dynamics. The considered device consists of monocrystalline pure Ge layers periodically interleaved with delta-doped layers and operates with vertical or in-plane hole transport in the presence of a perpendicular in-plane magnetic field. Inversion population on intersubband transitions arises due to light hole accumulation in E B fields, as in the bulk p-Ge laser. However, the considered structure achieves spatial separation of hole accumulation regions from the doped layers, which reduces ionized-impurity and carrier-carrier scattering for the majority of light holes. This allows remarkable increase of the gain in comparison with bulk p-Ge lasers. Population inversion and gain sufficient for laser operation are expected up to 77 K. Test structures grown by chemical vapor deposition demonstrate feasibility of producing the device with sufficient active thickness to allow quasioptical electrodynamic cavity solutions. The same device structure is considered in GaAs. The case of Si is much more complicated due to strong anisotropy of the valence band. The primary new result for Si is the first consideration of the anisotropy of optical phonon scattering for hot holes.
Show less
Date Issued
2005
Identifier
CFE0000863, ucf:46672
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0000863