View All Items

Title: QUANTITATIVE THICKNESS MAPPING IN HIGH-ANGLE ANNULAR DARK-FIELD (HAADF) SCANNING TRANSMISSION ELECTRON MICROSCOPY (STEM).
Creator: Nukala, Haritha, Heinrich, Helge, University of Central Florida
Abstract / Description: Only a few methods are currently available for the measurement of sample thicknesses in Transmission Electron Microscopy (TEM). These methods, Convergent-Beam Electron Diffraction (CBED) and thickness mapping in Energy-Filtered TEM (EFTEM), are either elaborate or complex. In this present work, I have investigated and come up with a simple straight-forward method to measure the local thickness of a TEM sample with the atomic number (Z-contrast) imaging using High-Angle Annular Dark Field ...
Show moreOnly a few methods are currently available for the measurement of sample thicknesses in Transmission Electron Microscopy (TEM). These methods, Convergent-Beam Electron Diffraction (CBED) and thickness mapping in Energy-Filtered TEM (EFTEM), are either elaborate or complex. In this present work, I have investigated and come up with a simple straight-forward method to measure the local thickness of a TEM sample with the atomic number (Z-contrast) imaging using High-Angle Annular Dark Field (HAADF) Scanning Transmission Electron Microscopy (STEM). HAADF STEM shows atomic number contrast for high scattering angles of the electrons, owing to predominant electron scattering at the potential of the nucleus similar to Rutherford scattering. The characterization of materials by STEM helps to identify microstructures and nanostructures within a sample and to analyze defects in samples. HAADF STEM imaging is capable of resolving atomic structures with better than 2 Å lateral resolution. However, HAADF STEM has so far not been systematically used to measure sample thicknesses. In Z-contrast imaging, it was known that the intensity of the electrons scattered to high angles increases with increase in the atomic number (Z) of the element/compound with increasing thickness of the sample based on the equation, I ~ t.Zα Where t, is the thickness and α, is a parameter between 1 and 2. This project was started with this simple approach, but the experimental results within the thesis show that the relation between the intensity and the atomic number is not well described by this equation. A more reliable parameter, σZ, the interaction coefficient of the material was calculated. Samples containing Ag2Al platelets in Al matrix were used for calibration purposes. Additional samples containing layers of known elements/compounds were obtained from TriQuint Semiconductors and from the Physics department of UCF to calculate σ for various elements/compounds. These experimental values were used to measure the local thicknesses in nanoparticles and also the total volume of the nanoparticles. This quantitative HAADF STEM analysis represents a new method, which can be added to the list of methods used for the purpose of measurement of the local thickness of a sample in the TEM. This method is especially useful for the thickness measurement of nanoparticles. The other two methods, CBED and thickness maps in EFTEM are strongly affected by the sample orientation and therefore not appropriate for the study of nanoparticle thicknesses, whereas orientation effects are negligible for the conditions used in this HAADF STEM analysis.
Show less
Date Issued: 2008
Identifier: CFE0002309, ucf:47859
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0002309

Title: High Temperature Materials Characterization and Sensor Application.
Creator: Ren, Xinhua, Gong, Xun, Wahid, Parveen, Wu, Xinzhang, An, Linan, University of Central Florida
Abstract / Description: This dissertation presents new solutions for turbine engines in need of wireless temperature sensors at temperatures up to 1300oC. Two important goals have been achieved in this dissertation. First, a novel method for precisely characterizing the dielectric properties of high temperature ceramic materials at high temperatures is presented for microwave frequencies. This technique is based on a high-quality (Q)-factor dielectrically-loaded cavity resonator, which allows for accurate...
Show moreThis dissertation presents new solutions for turbine engines in need of wireless temperature sensors at temperatures up to 1300oC. Two important goals have been achieved in this dissertation. First, a novel method for precisely characterizing the dielectric properties of high temperature ceramic materials at high temperatures is presented for microwave frequencies. This technique is based on a high-quality (Q)-factor dielectrically-loaded cavity resonator, which allows for accurate characterization of both dielectric constant and loss tangent of the material. The dielectric properties of Silicon Carbonitride (SiCN) and Silicoboron Carbonitride (SiBCN) ceramics, developed at UCF Advanced Materials Processing and Analysis Center (AMPC) are characterized from 25 to 1300oC. It is observed that the dielectric constant and loss tangent of SiCN and SiBCN materials increase monotonously with temperature. This temperature dependency provides the valuable basis for development of wireless passive temperature sensors for high-temperature applications. Second, wireless temperature sensors are designed based on the aforementioned high-temperature ceramic materials. The dielectric constant of high-temperature ceramics increases monotonically with temperature and as a result changes the resonant frequency of the resonator. Therefore, the temperature can be extracted by measuring the change of the resonant frequency of the resonator. In order for the resonator to operate wirelessly, antennas need to be included in the design. Three different types of sensors, corresponding to different antenna configurations, are designed and the prototypes are fabricated and tested. All of the sensors successfully perform at temperatures over 1000oC. These wireless passive sensor designs will significantly benefit turbine engines in need of sensors operating at harsh environments.
Show less
Date Issued: 2012
Identifier: CFE0004791, ucf:49727
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0004791

Title: EXPERIMENTAL TECHNIQUES FOR NONLINEAR MATERIAL CHARACTERIZATION: A NONLINEAR SPECTROMETER USING A WHITE-LIGHT CONTINUUM Z-SCAN.
Creator: Balu, Mihaela, Van Stryland, Eric, University of Central Florida
Abstract / Description: The main goal of this dissertation is to introduce and demonstrate a new method for the rapid determination of the nonlinear absorption spectra and the dispersion of the nonlinear refraction of optical materials in the visible and near IR spectral regions. However, conventional methods like, white-light continuum pump-probe and Z-scan techniques were used to measure the peak 2PA cross-sections for a number of commercially available photoinitiators. In the new method mentioned above, a high...
Show moreThe main goal of this dissertation is to introduce and demonstrate a new method for the rapid determination of the nonlinear absorption spectra and the dispersion of the nonlinear refraction of optical materials in the visible and near IR spectral regions. However, conventional methods like, white-light continuum pump-probe and Z-scan techniques were used to measure the peak 2PA cross-sections for a number of commercially available photoinitiators. In the new method mentioned above, a high energy, broadband femtosecond white-light continuum is used to replace the single wavelength source conventionally used in a Z-scan experiment. In a Z-scan experiment, the transmittance of a focused beam through a sample is monitored as the sample travels through the focus, in the Z direction, along the focused beam. Providing the sample exhibits nonlinear absorption and/or refraction, the detector monitors a change in transmittance and/or a change in the beam divergence (if the energy is partially collected through an aperture in front of the detector). Replacing the single wavelength source with a white-light continuum allows for a much faster way of measuring nonlinear absorption/refraction spectra. This could eliminate the need for using other tunable sources (e.g. Optical Parameter Generators/Amplifiers) for nonlinear measurements. These sources made nonlinear spectroscopy using Z-scan experiments a time consuming task. This new source/method allows for rapid and simultaneous measurement of the nonlinear absorption spectrum and the dispersion of the nonlinear refraction. We have confirmed the functionality of the continuum as a source for nonlinear optical characterization of materials by using it to perform Z-scans on the well characterized semiconductors ZnSe and ZnS and on solutions of organic dyes.
Show less
Date Issued: 2006
Identifier: CFE0001241, ucf:46934
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0001241

Title: Advanced Nanoscale Characterization of Plants and Plant-derived Materials for Sustainable Agriculture and Renewable Energy.
Creator: Soliman, Mikhael, Tetard, Laurene, Vaidyanathan, Raj, Kang, Hyeran, Santra, Swadeshmukul, Zhai, Lei, Chumbimuni Torres, Karin, University of Central Florida
Abstract / Description: The need for nanoscale, non-invasive functional characterization has become more significant with advances in nano-biotechnology and related fields. Exploring the ultrastructure of plant cell walls and plant-derived materials is necessary to access a more profound understanding of the molecular interactions in the systems, in view of a rational design for sustainable applications. This, in turn, relates to the pressing requirements for food, energy and water sustainability experienced...
Show moreThe need for nanoscale, non-invasive functional characterization has become more significant with advances in nano-biotechnology and related fields. Exploring the ultrastructure of plant cell walls and plant-derived materials is necessary to access a more profound understanding of the molecular interactions in the systems, in view of a rational design for sustainable applications. This, in turn, relates to the pressing requirements for food, energy and water sustainability experienced worldwide.Here we will present our advanced characterization approach to study the effects of external stresses on plants, and resulting opportunities for biomass valorization with an impact on the food-energy-water nexus.First, the adaption of plants to the pressure imposed by gravity in poplar reaction wood will be discussed. We will show that a multiscale characterization approach is necessary to reach a better understanding of the chemical and physical properties of cell walls across a transverse section of poplar stem. Our Raman spectroscopy and statistical analysis reveals intricate variations in the cellulose and lignin properties. Further, we will present evidence that advanced atomic force microscopy can reveal nanoscale variations within the individual cell wall layers, not attainable with common analytical tools. Next, chemical stresses, in particular the effect of Zinc-based pesticides on citrus plants, will be considered. We will show how multiscale characterization can support the development of new disease management methods for systemic bacterial diseases, such as citrus greening, of great importance for sustainable agriculture. In particular, we will focus on the study of new formulations, their uptake and translocation in the plants following different application methods. Lastly, we will consider how plant reactions to mechanical and chemical stresses can be controlled to engineer biomass for valorization applications. We will present our characterization of two examples: the production of carbon films derived from woody lignocellulosic biomass and the development of nanoscale growth promoters for food crop. A perspective of the work and discussion of the broader impact will conclude the presentation.
Show less
Date Issued: 2018
Identifier: CFE0007415, ucf:52717
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0007415

Title: ENVIRONMENTAL DEGRADATION OF OXIDATION RESISTANT AND THERMAL BARRIER COATINGS FOR FUEL-FLEXIBLE GAS TURBINE APPLICATIONS.
Creator: Mohan, Prabhakar, Sohn, Yongho, University of Central Florida
Abstract / Description: The development of thermal barrier coatings (TBCs) has been undoubtedly the most critical advancement in materials technology for modern gas turbine engines. TBCs are widely used in gas turbine engines for both power-generation and propulsion applications. Metallic oxidation-resistant coatings (ORCs) are also widely employed as a stand-alone protective coating or bond coat for TBCs in many high-temperature applications. Among the widely studied durability issues in these high-temperature...
Show moreThe development of thermal barrier coatings (TBCs) has been undoubtedly the most critical advancement in materials technology for modern gas turbine engines. TBCs are widely used in gas turbine engines for both power-generation and propulsion applications. Metallic oxidation-resistant coatings (ORCs) are also widely employed as a stand-alone protective coating or bond coat for TBCs in many high-temperature applications. Among the widely studied durability issues in these high-temperature protective coatings, one critical challenge that received greater attention in recent years is their resistance to high-temperature degradation due to corrosive deposits arising from fuel impurities and CMAS (calcium-magnesium-alumino-silicate) sand deposits from air ingestion. The presence of vanadium, sulfur, phosphorus, sodium and calcium impurities in alternative fuels warrants a clear understanding of high-temperature materials degradation for the development of fuel-flexible gas turbine engines. Degradation due to CMAS is a critical problem for gas turbine components operating in a dust-laden environment. In this study, high-temperature degradation due to aggressive deposits such as V2O5, P2O5, Na2SO4, NaVO3, CaSO4 and a laboratory-synthesized CMAS sand for free-standing air plasma sprayed (APS) yttria stabilized zirconia (YSZ), the topcoat of the TBC system, and APS CoNiCrAlY, the bond coat of the TBC system or a stand-alone ORC, is examined. Phase transformations and microstructural development were examined by using x-ray diffraction, scanning electron microscopy, and transmission electron microscopy. This study demonstrated that the V2O5 melt degrades the APS YSZ through the formation of ZrV2O7 and YVO4 at temperatures below 747Ã‚Â°C and above 747Ã‚Â°C, respectively. Formation of YVO4 leads to the depletion of the Y2O3 stabilizer and the deleterious transformation of the YSZ to the monoclinic ZrO2 phase. The investigation on the YSZ degradation by Na2SO4 and a Na2SO4 + V2O5 mixture (50-50 mol. %) demonstrated that Na2SO4 itself did not degrade the YSZ, however, in the presence of V2O5, Na2SO4 formed vanadates such as NaVO3 that degraded the YSZ through YVO4 formation at temperature as low as 700Ã‚Â°C. The APS YSZ was found to react with the P2O5 melt by forming ZrP2O7 at all temperatures. This interaction led to the depletion of ZrO2 in the YSZ (i.e., enrichment of Y2O3 in tÃ‚Â'-YSZ) and promoted the formation of the fluorite-cubic ZrO2 phase. Above 1250Ã‚Â°C, CMAS deposits were observed to readily infiltrate and significantly dissolve the YSZ coating via thermochemical interactions. Upon cooling, zirconia reprecipitated with a spherical morphology and a composition that depended on the local melt chemistry. The molten CMAS attack destabilized the YSZ through the detrimental phase transformation (tÃ‚Â' -> t -> f + m). Free standing APS CoNiCrAlY was also prone to degradation by corrosive molten deposits. The V2O5 melt degraded the APS CoNiCrAlY through various reactions involving acidic dissolution of the protective oxide scale, which yielded substitutional-solid solution vanadates such as (Co,Ni)3(VO4)2 and (Cr,Al)VO4. The molten P2O5, on the other hand, was found to consume the bond coat constituents significantly via reactions that formed both Ni/Co rich phosphates and Cr/Al rich phosphates. Sulfate deposits such as Na2SO4, when tested in encapsulation, damaged the CoNiCrAlY by Type I acidic fluxing hot corrosion mechanisms at 1000Ã‚Â°C that resulted in accelerated oxidation and sulfidation. The formation of a protective continuous Al2O3 oxide scale by preoxidation treatment significantly delayed the hot corrosion of CoNiCrAlY by sulfates. However, CoNiCrAlY in both as-sprayed and preoxidized condition suffered a significant damage by CaSO4 deposits via a basic fluxing mechanism that yielded CaCrO4 and CaAl2O4. The CMAS melt also dissolved the protective Al2O3 oxide scale developed on CoNiCrAlY by forming anorthite platelets and spinel oxides. Based on the detailed investigation on degradation of the APS YSZ and CoNiCrAlY by various corrosive deposits, an experimental attempt was carried out to mitigate the melt-induced deposit attack. Experimental results from this study demonstrate, for the first time, that an oxide overlay produced by electrophoretic deposition (EPD) can effectively perform as an environmental barrier overlay for APS TBCs. The EPD protective overlay has a uniform and easily-controllable thickness, uniformly distributed closed pores and tailored chemistry. The EPD Al2O3 and MgO overlays were successful in protecting the APS YSZ TBCs against CMAS attack and hot corrosion attack (e.g., sulfate and vanadate), respectively. Furnace thermal cyclic oxidation testing of overlay-modified TBCs on bond-coated superalloy also demonstrated the good adhesive durability of the EPD Al2O3 overlay.
Show less
Date Issued: 2010
Identifier: CFE0003099, ucf:48315
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0003099

Title: A Framework for Miniaturized Mechanical Characterization of Tensile, Creep, and Fatigue Properties of SLM Alloys.
Creator: Torres-Caceres, Jonathan, Orlovskaya, Nina, Xu, Yunjun, Das, Tuhin, University of Central Florida
Abstract / Description: With the heightened design complexity that may be achieved through additive manufacturing (AM) comes an equally complex set of distinct material characteristics. To properly characterize new materials for use in selective laser melting (SLM), extensive analysis is necessary. Traditional testing techniques, however, can be prohibitive in time and cost incurred. The small punch test (SPT) has been developed for such purposes, where material is scarce or costly. Although lacking standardization,...
Show moreWith the heightened design complexity that may be achieved through additive manufacturing (AM) comes an equally complex set of distinct material characteristics. To properly characterize new materials for use in selective laser melting (SLM), extensive analysis is necessary. Traditional testing techniques, however, can be prohibitive in time and cost incurred. The small punch test (SPT) has been developed for such purposes, where material is scarce or costly. Although lacking standardization, SPT has been successfully employed with various materials to assess material properties such as the yield and ultimate strength and verified by traditional testing results. With the accompaniment of numerical simulations for use in the inverse method and determining correlation factors, several methods exist for equating SPT results with traditional results. There are, however, areas of weakness with SPT which require development, and the solution of the inverse method can be demanding of time and resources. Additionally, the combination of SPT and SLM is relatively unexplored in literature, though studies have shown that SPT is sensitive to the types of structures and unique material characteristics present in SLM components. The present research therefore focuses on developing a framework for characterizing SLM materials via the small punch test. Several types of SLM materials in various orientations and processing states are small punch tested to evaluate the ability of the SPT to track the effects of these as they cause the materials to evolve. A novel cyclic test method is proposed to fill the gap in SPT fatigue testing. Results from these tests are evaluated via numerical modelling using the inverse method solved with the least squares method. Samples were also inspected using digital microscopy to connect fracture morphology to processing parameter variations. A framework is thus presented with which SPT may be utilized to more economically and expeditiously characterize SLM materials.
Show less
Date Issued: 2018
Identifier: CFE0007109, ucf:51952
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0007109

Title: Synthesis and Characterization of Core-Shell Zinc Silica Nanoparticles and Zinc Silica Nanogels for Agricultural Applications.
Creator: Berroth, Megan, Santra, Swadeshmukul, Moore, Sean, Jewett, Travis, University of Central Florida
Abstract / Description: Plant pathogens are a serious problem facing the agricultural industry today. Current methodologies use copper based biocides as the main form of defense. Unfortunately this can lead to damaging environmental effects and increased rates of antimicrobial resistance. In this study, antimicrobial activity of multiple alternative zinc-based nanoformulations were tested against three important plant pathogens: Xanthomonas alfalfae, Pseudomonas syringae, and Clavobacter michiganensis. Xanthomonas...
Show morePlant pathogens are a serious problem facing the agricultural industry today. Current methodologies use copper based biocides as the main form of defense. Unfortunately this can lead to damaging environmental effects and increased rates of antimicrobial resistance. In this study, antimicrobial activity of multiple alternative zinc-based nanoformulations were tested against three important plant pathogens: Xanthomonas alfalfae, Pseudomonas syringae, and Clavobacter michiganensis. Xanthomonas sub species cause Citrus canker, a devastating disease that affects millions of citrus trees worldwide while the latter two affect tomato crops. Materials synthesis was completed and the resulting nanoformulations were characterized by Atomic Absorption Spectroscopy, Scanning Electron Microscopy, High Resolution Transmission Electron Microscopy, and X-Ray Photoelectron Spectroscopy. The antimicrobial efficacy of the newly synthesized formulas and two commercially available products, Kocide 3000 (DuPont) and Nordox (Brandt), were determined by Minimum Inhibitory Concentration Assays followed by Bacterial Viability Assays. The subsequent data demonstrated a marketed difference in the way the antimicrobial agents acted upon the bacterial species. The core-shell zinc silica nanoparticles (C-SZnSiNP) proved to be ineffective, while the zinc silica nanogel (ZnSiNG) was as successful at killing the bacteria as the commercial products. This shows promise for a new alternative material with zinc at the forefront of the fight against plant pathogens.
Show less
Date Issued: 2015
Identifier: CFE0006209, ucf:51099
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0006209

Title: Beneficial Utilization of Municipal Solid Waste Incineration Ashes as Sustainable Road Construction Materials.
Creator: Tasneem, Kazi, Nam, Boo Hyun, Chopra, Manoj, Reinhart, Debra, Sohn, Yongho, University of Central Florida
Abstract / Description: Incineration of municipal solid waste (MSW) is common for energy recovery, and management of municipal solid waste incineration (MSWI) ashes has received a growing attention around the world. In the U.S., generation of MSW has increased up to 65% since 1980, to the current level of 251 million tons per year with 53.8% landfilled, 34.5% recycled and composted, and 11.7% incinerated with energy recovery. In the process of incineration, MSWI ash is being produced as byproducts; about 80 to 90%...
Show moreIncineration of municipal solid waste (MSW) is common for energy recovery, and management of municipal solid waste incineration (MSWI) ashes has received a growing attention around the world. In the U.S., generation of MSW has increased up to 65% since 1980, to the current level of 251 million tons per year with 53.8% landfilled, 34.5% recycled and composted, and 11.7% incinerated with energy recovery. In the process of incineration, MSWI ash is being produced as byproducts; about 80 to 90% of the MSWI ash is bottom ash (BA) and 10 to 20% is fly ash (FA) by weight. The current practice of the U.S. is to combine both BA and FA to meet the criteria to qualify as non-hazardous, and all combined ashes are disposed in landfills.European countries have utilized MSWI BA as beneficial construction materials by separating it from FA. The FA is mostly limited to landfill disposal as hazardous material due to its high content of toxic elements and salts. BA has been actively recycled in the areas of roadbed, asphalt paving, and concrete products in many of European and Asian countries. In those countries, recycling programs (including required physical properties and environmental criteria) of ash residue management have been developed so as to encourage and enforce the reuse of MSWI ashes instead of landfill disposal. Moreover, many studies have demonstrated the beneficial use of MSWI ashes as engineering materials with minimum environmental impacts.On the other hand, the U.S. has shown a lack of consistent and effective management plans, as well as environmental regulations for the use of MSWI ashes., Due to persistent uncertainty of engineering properties and inconsistency in the Federal and State regulations in the U.S., however, the recycling of the MSWI ashes has been hindered and they are mostly disposed in landfills.In this research work, current management practice, existing regulations, and environmental consequences of MSWI ashes utilization are comprehensively reviewed worldwide and nationwide with an emphasis of the potential area of its utilization in asphalt paving and concrete product. This research also entails a detailed chemical and microstructural characterization of MSWI BA and FA produced from a Refuse Derived Fuel (RDF) facility in Florida so that the MSWI ash is well characterized for its beneficial uses as construction materials.The material characterization includes Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDS), and X-ray Diffraction (XRD) techniques. In addition, leaching experiments have been conducted to investigate the environmental properties (e.g. leachate concentration) of BA and ash-mixed hot mix asphalt (HMA) and Portland cement concrete (PCC). Leaching results reveals the reduced leaching potential of toxic material from MSWI ashes while incorporated in HMA and PCC. Lastly, a preliminary experimental approach has been devised for the vitrification of FA which is a promising thermal process of transferring material into glassy state with higher physical and chemical integrity to reduce toxicity so that utilization of FA can be possible.
Show less
Date Issued: 2014
Identifier: CFE0005425, ucf:50404
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0005425

Title: Investigation on electrical properties of RF sputtered deposited BCN thin films.
Creator: Prakash, Adithya, Sundaram, Kalpathy, Yuan, Jiann-Shiun, Lin, Mingjie, University of Central Florida
Abstract / Description: The ever increasing advancements in semiconductor technology and continuous scaling of CMOS devices mandate the need for new dielectric materials with low-k values. The interconnect delay can be reduced not only by the resistance of the conductor but also by decreasing the capacitance of dielectric layer. Also cross-talk is a major issue faced by semiconductor industry due to high value of k of the inter-dielectric layer (IDL) in a multilevel wiring scheme in Si ultra large scale integrated...
Show moreThe ever increasing advancements in semiconductor technology and continuous scaling of CMOS devices mandate the need for new dielectric materials with low-k values. The interconnect delay can be reduced not only by the resistance of the conductor but also by decreasing the capacitance of dielectric layer. Also cross-talk is a major issue faced by semiconductor industry due to high value of k of the inter-dielectric layer (IDL) in a multilevel wiring scheme in Si ultra large scale integrated circuit (ULSI) devices. In order to reduce the time delay, it is necessary to introduce a wiring metal with low resistivity and a high quality insulating film with a low dielectric constant which leads to a reduction of the wiring capacitance.Boron carbon nitride (BCN) films are prepared by reactive magnetron sputtering from a B(&)#172;4C target and deposited to make metal-insulator-metal (MIM) sandwich structures using aluminum as the top and bottom electrodes. BCN films are deposited at various N2/Ar gas flow ratios, substrate temperatures and process pressures. The electrical characterization of the MIM devices includes capacitance vs. voltage (C-V), current vs voltage, and breakdown voltage characteristics. The above characterizations are performed as a function of deposition parameters.
Show less
Date Issued: 2013
Identifier: CFE0004912, ucf:49625
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0004912

Title: Design, Synthesis, Stability, and Photocatalytic Studies of Sustainable Metal-Organic Frameworks.
Creator: Logan, Matthew, Uribe Romo, Fernando, Zhai, Lei, Yuan, Yu, Kuebler, Stephen, Rahman, Talat, University of Central Florida
Abstract / Description: The presented dissertation focuses on the design, synthesis, and characterization of metal-organic frameworks (MOFs) composed of earth-abundant elements the exhibit photoredox activity and studied their application as heterogeneous photocatalysts in organic synthesis and in solar-to-chemical energy conversion. In particular, the structure-property relationships of titanium-based MOFs relating the structure of the organic building unit and the photophysical and photochemical activity of the...
Show moreThe presented dissertation focuses on the design, synthesis, and characterization of metal-organic frameworks (MOFs) composed of earth-abundant elements the exhibit photoredox activity and studied their application as heterogeneous photocatalysts in organic synthesis and in solar-to-chemical energy conversion. In particular, the structure-property relationships of titanium-based MOFs relating the structure of the organic building unit and the photophysical and photochemical activity of the solid material is studied. The first novel family of seven MOFs isoreticular to MIL-125-NH2, includes functionalized with N-alkyl groups with increasing chain length (methyl to heptyl) and with varying connectivity (primary or secondary). The functionalized materials displayed reduced optical bandgaps correlated with the increased inductive donor ability of the alkyl substituents, enhanced excited-state lifetimes, mechanistic information towards visible light CO2 reduction, and improved water stability. The second family of titanium MOFs was prepared with a new secondary building unit and organic links of varying lengths, for which Their crystal structure was solved utilizing powder X-ray diffraction crystallography. This work provides guidelines for the next generation of photocatalyst for the conversion of solar-to-chemical energy and other organic transformations.
Show less
Date Issued: 2018
Identifier: CFE0007219, ucf:52217
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0007219

Title: The Influence of Alloying Additions on Diffusion and Strengthening of Magnesium.
Creator: Kammerer, Catherine, Sohn, Yongho, Coffey, Kevin, Challapalli, Suryanarayana, Gordon, Ali, University of Central Florida
Abstract / Description: Magnesium alloys are being developed as advanced materials for structural applications where reduced weight is a primary motivator. Alloying can enhance the properties of magnesium without significantly affecting its density. Essential to alloy development, inclusive of processing parameters, is knowledge of thermodynamic, kinetic, and mechanical behavior of the alloy and its constituents. Appreciable progress has been made through conventional development processes, but to accelerate...
Show moreMagnesium alloys are being developed as advanced materials for structural applications where reduced weight is a primary motivator. Alloying can enhance the properties of magnesium without significantly affecting its density. Essential to alloy development, inclusive of processing parameters, is knowledge of thermodynamic, kinetic, and mechanical behavior of the alloy and its constituents. Appreciable progress has been made through conventional development processes, but to accelerate development of suitable wrought Mg alloys, an integrated Materials Genomic approach must be taken where thermodynamics and diffusion kinetic parameters form the basis of alloy design, process development, and properties-driven applications.The objective of this research effort is twofold: first, to codify the relationship between diffusion behavior, crystal structure, and mechanical properties; second, to provide fundamental data for the purpose of wrought Mg alloy development. Together, the principal deliverable of this work is an advanced understanding of Mg systems. To that end, the objective is accomplished through an aggregate of studies. The solid-to-solid diffusion bonding technique is used to fabricate combinatorial samples of Mg-Al-Zn ternary and Mg-Al, Mg-Zn, Mg-Y, Mg-Gd, and Mg-Nd binary systems. The combinatorial samples are subjected to structural and compositional characterization via Scanning Electron Microscopy with X-ray Energy Dispersive Spectroscopy, Electron Probe Microanalysis, and analytical Transmission Electron Microscopy. Interdiffusion in binary Mg systems is determined by Sauer-Freise and Boltzmann-Matano methods. Kirkaldy's extension of the Boltzmann-Matano method, on the basis of Onsager's formalism, is employed to quantify the main- and cross-interdiffusion coefficients in ternary Mg solid solutions. Impurity diffusion coefficients are determined by way of the Hall method. The intermetallic compounds and solid solutions formed during diffusion bonding of the combinatorial samples are subjected to nanoindentation tests, and the nominal and compositionally dependent mechanical properties are extracted by the Oliver-Pharr method.In addition to bolstering the scantly available experimental data and first-principles computations, this work delivers several original contributions to the state of Mg alloy knowledge. The influence of Zn concentration on Al impurity diffusion in binary Mg(Zn) solid solution is quantified to impact both the pre-exponential factor and activation energy. The main- and cross-interdiffusion coefficients in the ternary Mg solid solution of Mg-Al-Zn are reported wherein the interdiffusion of Zn is shown to strongly influence the interdiffusion of Mg and Al. A critical examination of rare earth element additions to Mg is reported, and a new phase in thermodynamic equilibrium with Mg-solid solution is identified in the Mg-Gd binary system. It is also demonstrated that Mg atoms move faster than Y atoms. For the first time the mechanical properties of intermetallic compounds in several binary Mg systems are quantified in terms of hardness and elastic modulus, and the influence of solute concentration on solid solution strengthening in binary Mg alloys is reported. The most significant and efficient solid solution strengthening is achieved by alloying Mg with Gd. The Mg-Nd and Mg-Gd intermetallic compounds exhibited better room temperature creep resistance than intermetallic compounds of Mg-Al. The correlation between the concentration dependence of mechanical properties and atomic diffusion is deliberated in terms of electronic nature of the atomic structure.
Show less
Date Issued: 2015
Identifier: CFE0005815, ucf:50043
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0005815

Characterization (2)	+ -
Materials Characterization (2)	+ -
3D printing (1)	+ -
Aluminum (1)	+ -
Atomic Force Microscopy (1)	+ -

BCN (1)	+ -
Beneficial Utilization (1)	+ -
Clavobacter michiganensis (1)	+ -
Combinatorial Sample (1)	+ -
Confocal Raman Microscopy (1)	+ -
Diffusion (1)	+ -
Electrical Characterization (1)	+ -
Electron Microscopy (1)	+ -
Environmental Degradation (1)	+ -
Gadolinium (1)	+ -
Hardness (1)	+ -
High-Temperature Materials (1)	+ -
Hot Corrosion (1)	+ -
Impurity (1)	+ -
Inter layer dielectrics (ILD) (1)	+ -
Interdiffusion (1)	+ -
Leaching (1)	+ -
MOFs (1)	+ -
Magnesium (1)	+ -
Mapping (1)	+ -
Material Characterization (1)	+ -
Materials Genome Initiative (1)	+ -
Materials Science (1)	+ -
Metal-Insulator-Metal (MIM) (1)	+ -
Metal-organic frameworks (1)	+ -

University of Central Florida (11)	+ -
Sohn, Yongho (3)	+ -
Santra, Swadeshmukul (2)	+ -
Zhai, Lei (2)	+ -
An, Linan (1)	+ -

Balu, Mihaela (1)	+ -
Berroth, Megan (1)	+ -
Challapalli, Suryanarayana (1)	+ -
Chopra, Manoj (1)	+ -
Chumbimuni Torres, Karin (1)	+ -
Coffey, Kevin (1)	+ -
Das, Tuhin (1)	+ -
Gong, Xun (1)	+ -
Gordon, Ali (1)	+ -
Heinrich, Helge (1)	+ -
Jewett, Travis (1)	+ -
Kammerer, Catherine (1)	+ -
Kang, Hyeran (1)	+ -
Kuebler, Stephen (1)	+ -
Lin, Mingjie (1)	+ -
Logan, Matthew (1)	+ -
Mohan, Prabhakar (1)	+ -
Moore, Sean (1)	+ -
Nam, Boo Hyun (1)	+ -
Nukala, Haritha (1)	+ -
Orlovskaya, Nina (1)	+ -
Prakash, Adithya (1)	+ -
Rahman, Talat (1)	+ -
Reinhart, Debra (1)	+ -
Ren, Xinhua (1)	+ -

Search In

Sort Results By:

Narrow results by:

Topical Subject

Collection

Type of Resource

Language

Creator

Format

Owner