Current Search: Nanotechnology (x)
View All Items
(1 - 11 of 11)
- Title
- Nanoarchitectured Energy Storage Devices.
- Creator
-
Yu, Zenan, Thomas, Jayan, Seal, Sudipta, Zhai, Lei, Fang, Jiyu, Sundaram, Kalpathy, University of Central Florida
- Abstract / Description
-
Supercapacitors, the devices that connect the gap between batteries and conventional capacitors, have recently attracted significant attention due to their high specific capacitance, substantially enhanced power and energy densities, and extraordinary cycle life. In order to realize even better performance with supercapacitors, rejuvenated effort towards developing nanostructured electrodes is necessary. In this dissertation, several strategic directions of nanoarchitecturing the electrodes...
Show moreSupercapacitors, the devices that connect the gap between batteries and conventional capacitors, have recently attracted significant attention due to their high specific capacitance, substantially enhanced power and energy densities, and extraordinary cycle life. In order to realize even better performance with supercapacitors, rejuvenated effort towards developing nanostructured electrodes is necessary. In this dissertation, several strategic directions of nanoarchitecturing the electrodes to enhance the performance of supercapacitors are investigated. An introduction and background of supercapacitors, which includes motivation, classification and working principles, recent nanostructured electrode materials studies, and devices fabrication, are initially presented. A facile method, called Spin-on Nanoprinting (SNAP), to fabricate highly ordered manganese dioxide (MnO2) nanopillars is introduced. The SNAP method that is further modified to develop carbon nanoarray electrodes is also discussed. Subsequently, a template-free method to develop high aspect ratio copper oxide nanowhiskers on copper substrate is presented, which boosts the surface area by 1000 times compared to non-nanostructured copper substrate. Electrochemically deposited MnO2 on the nanostructured substrate provided a specific capacitance of about 1379 F g-1 which is very close to the theoretical value (~ 1400 F g-1) due to this efficient nanostructure design. In addition, a novel method to decorate metal nanoparticles on graphene aerogel, which considerably enhances the electronic conductivity and the corresponding specific capacitance, is demonstrated. Moreover, ferric oxide (Fe2O3) nanorods prepared by a simple hydrothermal method is discussed. Asymmetric devices assembled based on Fe2O3 nanorods and MnO2 nanowhiskers show excellent electrochemical properties. The devices not only display the capability to store energy but also transmit electricity through the inner copper core. These two functions are independent and do not interfere with each other. Finally, a summary of this dissertation as well as some potential future directions are presented.
Show less - Date Issued
- 2015
- Identifier
- CFE0006062, ucf:50995
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0006062
- Title
- A Retrospective Analysis and Field Study of Nanotechnology Related Ergonomic Risk in Industries Utilizing Nanomaterials.
- Creator
-
Greaves-Holmes, Wanda, Mccauley Bush, Pamela, Mollaghasemi, Mansooreh, Sala-Diakanda, Serge, Raghavan, Seetha, Ahram, Tareq, University of Central Florida
- Abstract / Description
-
The National Science Foundation estimates that two million skilled nanotechnology workers will be needed world wide by 2015 (-) one million of them in the United States (2001). In the absence of scientific clarity about the potential health effects of occupational exposure to nanoparticles, guidance in decision making about hazards, risk, and controls takes on new importance. Currently, guiding principles on personal protective equipment for workers who come in contact with nanomaterials have...
Show moreThe National Science Foundation estimates that two million skilled nanotechnology workers will be needed world wide by 2015 (-) one million of them in the United States (2001). In the absence of scientific clarity about the potential health effects of occupational exposure to nanoparticles, guidance in decision making about hazards, risk, and controls takes on new importance. Currently, guiding principles on personal protective equipment for workers who come in contact with nanomaterials have not been standardized universally. Utilizing the NASA-TLX, this dissertation investigates the adequacy and shortcomings of research efforts that seek to determine whether or not occupational exposure to nanomaterials while wearing personal protective equipment (PPE) is or is not potentially frustrating to the worker. While wearing PPE does the worker perceive additional effort, performance, physical, mental or temporal demands or are not impacted during task performance.
Show less - Date Issued
- 2012
- Identifier
- CFE0004497, ucf:49267
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0004497
- Title
- Multimaterial fibers in photonics and nanotechnology.
- Creator
-
Tao, Guangming, Abouraddy, Ayman, Li, Guifang, Glebov, Leonid, Peale, Robert, University of Central Florida
- Abstract / Description
-
Recent progress in combing multiple materials with distinct optical, electronic, and thermomechanical properties monolithically in a kilometer-long fiber drawn from a preform offers unique multifunctionality at a low cost. A wide range of unique in-fiber devices have been developed in fiber form-factor using this strategy. Here, I summary my recent results in this nascent field of 'multimaterial fibers'. I will focus on my achievements in producing robust infrared optical fibers and in...
Show moreRecent progress in combing multiple materials with distinct optical, electronic, and thermomechanical properties monolithically in a kilometer-long fiber drawn from a preform offers unique multifunctionality at a low cost. A wide range of unique in-fiber devices have been developed in fiber form-factor using this strategy. Here, I summary my recent results in this nascent field of 'multimaterial fibers'. I will focus on my achievements in producing robust infrared optical fibers and in appropriating optical fiber production technology for applications in nanofabrication.The development of optical components suitable for the infrared (IR) is crucial for applications in this spectral range to reach the maturity level of their counterparts in the visible and near-infrared spectral regimes. A critical class of optical components that has yet to be fully developed is that of IR optical fibers. Here I will present several unique approaches that may result in low-cost, robust IR fibers that transmit light from 1.5 microns to 15 microns drawn from multimaterial preforms. These preforms are prepared exploiting the newly developed procedure of multimaterial coextrusion, which provides unprecedented flexibility in material choices and structure engineering in the extruded preform. I will present several different 'generations' of multimaterial extrusion that enable access to a variety of IR fibers. Examples of the IR fibers realized using this methodology include single mode IR fibers, large index-contrast IR fibers, IR imaging fiber bundles, IR photonic crystal and potentially photonic band-gap fibers.The complex structures produced in multimaterial fibers may also be used in the fabrication of micro- and nano-scale spherical particles by exploiting a recently discovered in-fiber Plateau-Rayleigh capillary instability. Such multimaterial structured particles have promising application in drug delivery, optical sensors, and nanobiotechnology. The benefits accrued from the multimaterial fiber methodology allow for the scalable fabrication of micro- and nano-scale particles having complex internal architectures, such as multi-shell particles, Janus-particles, and particles with combined control over the radial and azimuthal structure.Finally, I will summarize my views on the compatibility of a wide range of amorphous and crystalline materials with the traditional thermal fiber drawing process and with the more recent multimaterial fiber strategy.
Show less - Date Issued
- 2014
- Identifier
- CFE0005555, ucf:50289
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0005555
- Title
- CERIUM OXIDE NANOPARTICLES FOR THE DETECTION OF ANTIMICROBIAL RESISTANCE.
- Creator
-
Noll, Alexander, Perez, J. Manuel, University of Central Florida
- Abstract / Description
-
The rise of antimicrobial resistance demands the development of more rapid screening methods for the detection of antimicrobial resistance in clinical samples to both give the patient the proper treatment and expedite the treatment of patients. Cerium oxide nanoparticles may serve a useful role in diagnostics due to their ability to exist in a mixed valence state and act as either oxidizing agents or reducing agents. Considering that cerium oxide nanoparticles have been shown to shift in...
Show moreThe rise of antimicrobial resistance demands the development of more rapid screening methods for the detection of antimicrobial resistance in clinical samples to both give the patient the proper treatment and expedite the treatment of patients. Cerium oxide nanoparticles may serve a useful role in diagnostics due to their ability to exist in a mixed valence state and act as either oxidizing agents or reducing agents. Considering that cerium oxide nanoparticles have been shown to shift in absorbance upon oxidation, a useful method of antimicrobial resistance detection could be based on the oxidation of cerium oxide nanoparticles. Herein, an assay is described whereby cerium oxide nanoparticle oxidation is a function of glucose metabolism of bacterial samples in the presence of an antimicrobial agent. Cerium oxide nanoparticles were shown to have an absorbance in the range of 395nm upon oxidation by hydrogen peroxide whereas mixed valence cerium oxide nanoparticles lacked an absorbance around 395nm. In the presence the hydrogen peroxide-producing glucose oxidase and either increasing concentrations of glucose or bacterial medium supplemented with increasing concentrations of glucose, cerium oxide nanoparticles were shown to increase in absorbance at 395nm. This oxidation assay was capable of measuring differences in the absorbance of E. coli and S. aureus samples grown in the presence of inhibitory and non-inhibitory concentrations of ampicillin in as little as six hours. Therefore, this cerium oxide nanoparticle oxidation assay may be very useful for use in clinical laboratories for the detection of antimicrobial resistance due to the relatively low cost, no requirement for specialized equipment and, most importantly, the reduced incubation time of the assay to as little as six hours compared to current gold standard antimicrobial resistance detection methods that require 24 hours. This assay may thus also help partially circumvent the issue of knowledge of antimicrobial resistance in infected patients before prescribing improper regimens.
Show less - Date Issued
- 2011
- Identifier
- CFH0003760, ucf:44780
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFH0003760
- Title
- Fabrication and Investigation of an enzyme-free, Nanoparticle-based Biosensor for Hydrogen Peroxide determination.
- Creator
-
Neal, Craig, Seal, Sudipta, Cho, Hyoung Jin, Florczyk, Stephen, University of Central Florida
- Abstract / Description
-
Electrochemical biosensors often employ enzymes as detection elements. These sensors are highly selective towards target analytes, however the scope of their application is limited by the poor stability of the enzyme. In this study, multi-valent inorganic cerium oxide nanoparticles were used as detection elements for the analysis of hydrogen peroxide. The electrochemical response of the cerium oxide towards hydrogen peroxide analyte is defined through cyclic voltammetry and chronoamperometry....
Show moreElectrochemical biosensors often employ enzymes as detection elements. These sensors are highly selective towards target analytes, however the scope of their application is limited by the poor stability of the enzyme. In this study, multi-valent inorganic cerium oxide nanoparticles were used as detection elements for the analysis of hydrogen peroxide. The electrochemical response of the cerium oxide towards hydrogen peroxide analyte is defined through cyclic voltammetry and chronoamperometry. This response was found to be dependent on nanoparticle Ce3+:Ce4+ redox state ratio and this property is exploited to fabricate a biosensor. As produced, the biosensor demonstrated sensitivity at picomolar analyte concentrations. Further, the sensitivity of the electrode is stable across a range of temperatures and pH's which inhibit the function of standard enzyme-based sensors. Additionally, the produced sensor retained function in sheep serum demonstrating the high selectivity and robustness of the sensor.
Show less - Date Issued
- 2016
- Identifier
- CFE0006362, ucf:51540
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0006362
- Title
- ARC-DISCHARGE IN SOLUTION: A NOVEL SYNTHESIS METHOD FOR CARBON NANOTUBES AND IN SITU DECORATION OF CARBON NANOTUBES WITH NANOPARTICLES.
- Creator
-
Bera, Debasis, Seal, Sudipta, University of Central Florida
- Abstract / Description
-
Nanotechnology has reached the status of the 21st century's leading science and technology based on fundamental and applied research during the last two decades. An important feature of nanotechnology is to bridge the crucial dimensional gap between the atomic and molecular fundamental sciences and microstructural scale of engineering. Accordingly, it is very important to have an in-depth understanding of the synthesis of nanomaterials for the use of state-of-the-art high technological...
Show moreNanotechnology has reached the status of the 21st century's leading science and technology based on fundamental and applied research during the last two decades. An important feature of nanotechnology is to bridge the crucial dimensional gap between the atomic and molecular fundamental sciences and microstructural scale of engineering. Accordingly, it is very important to have an in-depth understanding of the synthesis of nanomaterials for the use of state-of-the-art high technological devices with enhanced properties. Recently, the 'bottom-up' approach for the fabrication of nanomaterials has received a great deal of attention for its simplicity and cost effectiveness. Tailoring the various parameters during synthesis of selected nanoparticles can be used to fabricate technologically important components. During the last decade, carbon nanotubes (CNTs) have been envisioned for a host of different new applications. Although carbon nanotubes can be synthesized using a variety of techniques, large-scale synthesis is still a great challenge to the researchers. Three methods are commonly used for commercial and bulk productions of carbon nanotubes: arc-discharge, chemical vapor deposition and laser ablation. However, low-cost, large-scale production of high-quality carbon nanotubes is yet to be reported. One of the objectives of the present research is to develop a simplified synthesis method for the production of large-scale, low-cost carbon nanotubes with functionality. Herein, a unique, simple, inexpensive and one-step synthesis route of CNTs and CNTs decorated with nanoparticles is reported. The method is simple arc-discharge in solution (ADS). For this new method, a full-fledged optoelectronically controlled instrumen is reported here to achieve high efficiency and continuous bulk production of CNTs. In this system, a constant gap between the two electrodes is maintained using a photosensor which allows a continuous synthesis of the carbon nanostructures. The system operates in a feedback loop consisting of an electrode-gap detector and an analogue electronic unit, as controller. This computerized feed system was also used in single process step to produce in situ-decorated CNTs with a variety of industrially important nanoparticles. To name a few, we have successfully synthesized CNTs decorated with 3-4 nm ceria, silica and palladium nanoparticles for many industrially relevant applications. This process can be extended to synthesize decorated CNTs with other oxide and metallic nanoparticles. Sixty experimental runs were carried out for parametric analysis varying process parameters including voltage, current and precursors. The amount of yield with time, rate of erosion of the anode, and rate of deposition of carbonaceous materials on the cathode electrode were investigated. Normalized kinetic parameters were evaluated for different amperes from the sets of runs. The production rate of pristine CNT at 75 A is as high as 5.89 ± 0.28 g.min-1. In this study, major emphasis was given on the characterizations of CNTs with and without nanoparticles using various techniques for surface and bulk analysis of the nanostructures. The nanostructures were characterized using transmission electron microscopy, high resolution transmission electron microscopy, scanning transmission electron microscopy, energy dispersive spectroscopy and scanning electron microscopy, x-ray photo electron spectroscopy, x-ray diffraction studies, and surface area analysis. Electron microscopy investigations show that the CNTs, collected from the water and solutions, are highly pure except the presence of some amorphous carbon. Thermogravimetric analysis and chemical oxidation data of CNTs show the good agreement with electron microscopy analysis. The surface area analysis depicts very high surface area. For pristine multi-walled carbon nanotubes, the BET surface area is approximately 80 m2.g-1. X-ray diffraction studies on carbon nanotubes shows that the products are clean. Nano-sized palladium decorated carbon nanotubes are supposed to be very efficient for hydrogen storage. The synthesis for in-situ decoration of palladium nanoparticles on carbon nanotubes using the arc discharge in solution process has been extensively carried out for possible hydrogen storage applications and electronic device fabrication. Palladium nanoparticles were found to form during the reduction of palladium tetra-chloro-square planar complex. The formation of such a complex was investigated using ultraviolet-visible spectroscopic method. Pd-nanoparticles were simultaneously decorated on carbon nanotubes during the rolling of graphene sheets in the arc-discharge process. Zero-loss energy filtered transmission electron microscopy and scanning transmission electron microscopy confirm the presence of 3 nm palladium nanoparticles. The deconvoluted X-ray photoelectron spectroscopy envelope shows the presence of palladium. Surface area measurements using BET method show a surface area of 28 m2.g-1. The discrepancy with pristine CNTs can be explained considering the density of palladium (12023 kg.m-3). Energy dispersive spectroscopy suggests no functionalization of chlorine to the sidewall of carbon nanotubes. The presence of dislodged graphene sheets with wavy morphology as observed with high-resolution transmission electron microscopy supports the formation of CNTs through the 'scroll mechanism'.
Show less - Date Issued
- 2005
- Identifier
- CFE0000450, ucf:46388
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0000450
- Title
- USING ANTENNA TILE-ASSISTED SUBSTRATE DELIVERY TO IMPROVE THE DETECTION LIMITS OF DEOXYRIBOZYME BIOSENSORS.
- Creator
-
Cox, Amanda, Kolpashchikov, Dmitry, University of Central Florida
- Abstract / Description
-
One common limitation of enzymatic reactions is the diffusion of a substrate to the enzyme active site and/or the release of the reaction products. These reactions are known as diffusion-controlled. Overcoming this limitation may enable faster catalytic rates, which in the case of catalytic biosensors can potentially lower limits of detection of specific analyte. Here we created an artificial system to enable deoxyribozyme (Dz) 10-23 based biosensor to overcome its diffusion limit. The sensor...
Show moreOne common limitation of enzymatic reactions is the diffusion of a substrate to the enzyme active site and/or the release of the reaction products. These reactions are known as diffusion-controlled. Overcoming this limitation may enable faster catalytic rates, which in the case of catalytic biosensors can potentially lower limits of detection of specific analyte. Here we created an artificial system to enable deoxyribozyme (Dz) 10-23 based biosensor to overcome its diffusion limit. The sensor consists of the two probe strands, which bind to the analyzed nucleic acid by Watson-Crick base pairs and, upon binding re-form the catalytic core of Dz 10-23. The activated Dz 10-23 cleaves the fluorophore and quencher-labeled DNA-RNA substrate which separates the fluorophore from the quencher thus producing high fluorescent signal. This system uses a Dz 10-23 biosensor strand associated to a DNA antenna tile, which captures the fluorogenic substrate and channels it to the reaction center where the Dz 10-23 cleaves the substrate. DNA antenna tile captures fluorogenic substrate and delivers it to the activated Dz 10-23 core. This allows for lower levels of analyte to be detected without compromising the specificity of the biosensor. The results of this experiment demonstrated that using DNA antenna, we can create a synthetic environment around the Dz 10-23 biosensor to increase its efficiency and allow for lower levels of analyte to be detected without using amplification techniques like PCR.
Show less - Date Issued
- 2015
- Identifier
- CFH0004887, ucf:45432
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFH0004887
- Title
- Synthesis and Characterization of Core-Shell Zinc Silica Nanoparticles and Zinc Silica Nanogels for Agricultural Applications.
- Creator
-
Berroth, Megan, Santra, Swadeshmukul, Moore, Sean, Jewett, Travis, University of Central Florida
- Abstract / Description
-
Plant pathogens are a serious problem facing the agricultural industry today. Current methodologies use copper based biocides as the main form of defense. Unfortunately this can lead to damaging environmental effects and increased rates of antimicrobial resistance. In this study, antimicrobial activity of multiple alternative zinc-based nanoformulations were tested against three important plant pathogens: Xanthomonas alfalfae, Pseudomonas syringae, and Clavobacter michiganensis. Xanthomonas...
Show morePlant pathogens are a serious problem facing the agricultural industry today. Current methodologies use copper based biocides as the main form of defense. Unfortunately this can lead to damaging environmental effects and increased rates of antimicrobial resistance. In this study, antimicrobial activity of multiple alternative zinc-based nanoformulations were tested against three important plant pathogens: Xanthomonas alfalfae, Pseudomonas syringae, and Clavobacter michiganensis. Xanthomonas sub species cause Citrus canker, a devastating disease that affects millions of citrus trees worldwide while the latter two affect tomato crops. Materials synthesis was completed and the resulting nanoformulations were characterized by Atomic Absorption Spectroscopy, Scanning Electron Microscopy, High Resolution Transmission Electron Microscopy, and X-Ray Photoelectron Spectroscopy. The antimicrobial efficacy of the newly synthesized formulas and two commercially available products, Kocide 3000 (DuPont) and Nordox (Brandt), were determined by Minimum Inhibitory Concentration Assays followed by Bacterial Viability Assays. The subsequent data demonstrated a marketed difference in the way the antimicrobial agents acted upon the bacterial species. The core-shell zinc silica nanoparticles (C-SZnSiNP) proved to be ineffective, while the zinc silica nanogel (ZnSiNG) was as successful at killing the bacteria as the commercial products. This shows promise for a new alternative material with zinc at the forefront of the fight against plant pathogens.
Show less - Date Issued
- 2015
- Identifier
- CFE0006209, ucf:51099
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0006209
- Title
- The Owl Sensor: a smart nanostructure for single nucleotide variation analysis.
- Creator
-
Karadeema, Rebekah, Kolpashchikov, Dmitry, Chumbimuni Torres, Karin, Harper, James, University of Central Florida
- Abstract / Description
-
Analysis of single nucleotide variations (SNVs) in DNA and RNA sequences is extensively used in healthcare for detection of genetic mutations and analysis of drug resistant pathogens. Here we developed a nucleic acid sensor able to differentiate between a fully matched analyte and one with a SNV in a wide temperature range of 5(&)deg;C-32(&)deg;C. The sensor, dubbed here the 'Owl Sensor' due to the complex's resemblance to owl eyes, utilizes recent developments in DNA nanotechnology and...
Show moreAnalysis of single nucleotide variations (SNVs) in DNA and RNA sequences is extensively used in healthcare for detection of genetic mutations and analysis of drug resistant pathogens. Here we developed a nucleic acid sensor able to differentiate between a fully matched analyte and one with a SNV in a wide temperature range of 5(&)deg;C-32(&)deg;C. The sensor, dubbed here the 'Owl Sensor' due to the complex's resemblance to owl eyes, utilizes recent developments in DNA nanotechnology and synthetic biology to self-assemble a fluorescent DNA nanostructure called a Double Crossover, or DX Tile, capable of differentiating SNVs in a large temperature range, including ambient temperature. In the presence of fully matched nucleic acid analytes, a stable complex is formed with high fluorescent signal; however in the presence of a single base variation in the analyte, unfavourable helicity results in little-to-no observed complex formation. The novelty of the approach is that selectivity of analyte recognition is, at least in part, determined by the structural rigidity of the entire nanostructure rather than by the stability of analyte-probe hybrid, as is the case for conventional hybridization probes. The rigid nanostructure collapses if a minor imperfection, e.g. if a single-base mispairing, is present. Owl Sensor differentiates fully matched analyte from mismatched in a wide temperature range, with mismatched analyte producing only the background fluorescence, selectivity that is hard to achieve by conventional hybridization probes. Owl Sensor therefore promises to add to the toolbox for diagnosis of genetic disorders and infectious diseases at ambient temperatures.
Show less - Date Issued
- 2016
- Identifier
- CFE0006691, ucf:51916
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0006691
- Title
- Theoretical Studies of Nanostructure Formation and Transport on Surfaces.
- Creator
-
Aminpour, Maral, Rahman, Talat, Stolbov, Sergey, Roldan Cuenya, Beatriz, Blair, Richard, University of Central Florida
- Abstract / Description
-
This dissertation undertakes theoretical and computational research to characterize and understand in detail atomic configurations and electronic structural properties of surfaces and interfaces at the nano-scale, with particular emphasis on identifying the factors that control atomic-scale diffusion and transport properties. The overarching goal is to outline, with examples, a predictive modeling procedure of stable structures of novel materials that, on the one hand, facilitates a better...
Show moreThis dissertation undertakes theoretical and computational research to characterize and understand in detail atomic configurations and electronic structural properties of surfaces and interfaces at the nano-scale, with particular emphasis on identifying the factors that control atomic-scale diffusion and transport properties. The overarching goal is to outline, with examples, a predictive modeling procedure of stable structures of novel materials that, on the one hand, facilitates a better understanding of experimental results, and on the other hand, provide guidelines for future experimental work. The results of this dissertation are useful in future miniaturization of electronic devices, predicting and engineering functional novel nanostructures. A variety of theoretical and computational tools with different degrees of accuracy is used to study problems in different time and length scales. Interactions between the atoms are derived using both ab-initio methods based on Density Functional Theory (DFT), as well as semi-empirical approaches such as those embodied in the Embedded Atom Method (EAM), depending on the scale of the problem at hand. The energetics for a variety of surface phenomena (adsorption, desorption, diffusion, and reactions) are calculated using either DFT or EAM, as feasible. For simulating dynamic processes such as diffusion of ad-atoms on surfaces with dislocations the Molecular Dynamics (MD) method is applied. To calculate vibrational mode frequencies, the infinitesimal displacement method is employed. The combination of non-equilibrium Green's function (NEGF) and DFT is used to calculate electronic transport properties of molecular devices as well as interfaces and junctions.
Show less - Date Issued
- 2013
- Identifier
- CFE0005298, ucf:50504
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0005298
- Title
- Development of a nano-sensing approach and a portable prototype for real-time detection and quantification of free mercury in stream-flow: combining science and engineering in pro of the environment.
- Creator
-
Chemnasiri, Warinya, Hernandez, Florencio, Kuebler, Stephen, Zou, Shengli, Uribe Romo, Fernando, Huo, Qun, University of Central Florida
- Abstract / Description
-
Mercury (Hg) is a well-known hazardous environmental contaminant existing in several forms, but all are toxic to human in one way or the others. Since Hg usually settles into water polluting the environment and accumulating in living organisms, it is crucial to monitor Hg levels in the aquatic ecosystem. Although there are many well established techniques currently used to detect Hg, most of them require elaborate and time-consuming sample preparation and pre-concentration procedures, as well...
Show moreMercury (Hg) is a well-known hazardous environmental contaminant existing in several forms, but all are toxic to human in one way or the others. Since Hg usually settles into water polluting the environment and accumulating in living organisms, it is crucial to monitor Hg levels in the aquatic ecosystem. Although there are many well established techniques currently used to detect Hg, most of them require elaborate and time-consuming sample preparation and pre-concentration procedures, as well as costly and bulky equipment that limit their practical application in the field. In order to overcome the existent limitations in Hg determination methods, Hernandez and co-workers proposed the first surface Plasmon resonance (SPR) (-) based Hg sensor using gold nanorods (AuNRs) that offers high sensitivity and selectivity, attributed to the strong affinity between Au and Hg. In this dissertation, I first present my contribution to the understanding of the effect of size and aspect ratio of AuNRs on the limit of detection (LOD) and the dynamic range (DR) of the SPR-based Hg sensor using the qualitative model. In this part I demonstrate how both sensitivity and DR can be improved simultaneously via a modified wet chemistry procedure. Then, I show our approach towards the immobilization of AuNRs silane coated glass slides to expand the application of the SPR-based Hg sensor to stream-flow. Finally, I present the design and fabrication of the first real prototype of the SPR-based Hg sensor, and its application in stream-flow detection and speciation of mercury in the environment. The outcomes of my research have resulted in an innovative real-time portable Hg sensor apparatus with the desired high sensitivity, selectivity and DR to be used in stream-flow applications in Oak Ridge National Labs sites.
Show less - Date Issued
- 2015
- Identifier
- CFE0006283, ucf:51589
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0006283
