View All Items
(1 - 2 of 2)
- Title
- CALIBRATION OF ALUMINA-EPOXY NANOCOMPOSITES USING PIEZOSPECTROSCOPY FOR THE DEVELOPMENT OF STRESS-SENSING ADHESIVES.
- Creator
-
Stevenson, Amanda, Raghavan, Seetha, University of Central Florida
- Abstract / Description
-
A non-invasive method to quantify the stress distribution in polymer-based materials is presented through the piezospectroscopic calibration of alumina-epoxy nanocomposites. Three different alumina volume fraction nanocomposites were created and loaded under uniaxial compression in order to determine the relationship between applied stress and the frequency shift of the R-lines produced by alumina under excitation. Quantitative values for six piezospectroscopic coefficients were obtained...
Show moreA non-invasive method to quantify the stress distribution in polymer-based materials is presented through the piezospectroscopic calibration of alumina-epoxy nanocomposites. Three different alumina volume fraction nanocomposites were created and loaded under uniaxial compression in order to determine the relationship between applied stress and the frequency shift of the R-lines produced by alumina under excitation. Quantitative values for six piezospectroscopic coefficients were obtained which represent the stress-sensing property of the nanocomposites. The results were applied to an alumina-filled adhesive in a single lap shear configuration demonstrating the capability of the technique to monitor R-line peak positions with high spatial resolution and assess the stress distribution within the material prior to failure. Additionally, particle dispersion and volume fraction were confirmed with spectral intensities, introducing a novel experimental method for the assessment of quality in manufacturing of such nanocomposites. Results were further used to initiate studies in determining the load transfer to the nanoparticles and assessing the fundamental driving mechanisms.
Show less - Date Issued
- 2011
- Identifier
- CFE0003744, ucf:48777
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0003744
- Title
- CORRELATING MICROSTRUCTURAL DEVELOPMENT AND FAILURE MECHANISMS TO PHOTOSTIMULATED LUMINESCENCE SPECTROSCOPY AND ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY IN THERMAL BARRIER COATINGS.
- Creator
-
Jayaraj, Balaji, Sohn, Yongho, University of Central Florida
- Abstract / Description
-
Thermal barrier coatings (TBCs) are widely used for thermal protection of hot section components in turbines for propulsion and power generation. Applications of TBCs based on a clearer understanding of failure mechanisms can help increase the performance and life-cycle cost of advanced gas turbine engines. Development and refinement of robust non-destructive evaluation techniques can also enhance the reliability, availability and maintainability of hot section components in gas turbines...
Show moreThermal barrier coatings (TBCs) are widely used for thermal protection of hot section components in turbines for propulsion and power generation. Applications of TBCs based on a clearer understanding of failure mechanisms can help increase the performance and life-cycle cost of advanced gas turbine engines. Development and refinement of robust non-destructive evaluation techniques can also enhance the reliability, availability and maintainability of hot section components in gas turbines engines. In this work, degradation of TBCs was non-destructively examined by photostimulated luminescence spectroscopy (PSLS) and electrochemical impedance spectroscopy (EIS) as a function of furnace thermal cycling carried out in air with 10-minute heat-up, 0.67, 9.6 and 49.6 -hour dwell duration at 1121°C (2050°F), and 10-minute forced-air quench. TBCs examined in this study consisted of either electron beam physical vapor deposited and air plasma sprayed yttria-stabilized zirconia (YSZ) on a variety of bond coat / superalloy substrates including bond coats of NiCoCrAlY and (Ni,Pt)Al, and superalloys of CMSX-4, Rene'N5, Haynes 230 and MAR-M-509. Detailed microstructural characterization by scanning electron microscopy and energy dispersive spectroscopy was carried out to document the degradation and failure characteristics of TBC failure, and correlate results of PSLS and EIS. Mechanisms of microstructural damage initiation and progression varied as a function of TBC architecture and thermal cycling dwell time, and included undulation of the interface between the thermally grown oxide (TGO) and bond coats, internal oxidation of the bond coats, and formation of Ni/Co-rich TGO. These microstructural observations were correlated to the evolution in compressive residual stress in the TGO scale determined by PSLS shift. Correlations include stress-relief and corresponding luminescence shift towards stress-free luminescence associated with subcritical cracking of the TGO scale and stress-relaxation associated with gradual shift in the luminescence towards stress-free luminescence is related to the undulation of TGO/bondcoat interface (e.g., rumpling and ratcheting). Microstructural changes in TBCs such as YSZ sintering, TGO growth, and subcritical damages within the YSZ and TGO scale were also correlated to the changes in electrochemical resistance and capacitance of the YSZ and TGO, respectively. With thermal exposure the YSZ/TGO resistance and capacitance increased and decreased as result of sintering and TGO growth. With progressive thermal cycling damages in the TGO was related to the TGO capacitance showing a continuous increase and at failure TGO capacitance abruptly increased with the exposure of bondcoat. Further correlations among the microstructural development, PSLS and EIS are documented and discussed, particularly as a function of dwell time used during furnace thermal cycling test, with due respect for changes in failure characteristics and mechanisms for various types of TBCs.
Show less - Date Issued
- 2011
- Identifier
- CFE0003635, ucf:48882
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0003635
