Current Search:  Reactive Oxygen Species (x)

View All Items

  • CSV Spreadsheet
(1 - 6 of 6)
Fabrication and Investigation of an enzyme-free, Nanoparticle-based Biosensor for Hydrogen Peroxide determination
Title
Fabrication and Investigation of an enzyme-free, Nanoparticle-based Biosensor for Hydrogen Peroxide determination.
Creator
Neal, Craig, Seal, Sudipta, Cho, Hyoung Jin, Florczyk, Stephen, University of Central Florida
Abstract / Description
Electrochemical biosensors often employ enzymes as detection elements. These sensors are highly selective towards target analytes, however the scope of their application is limited by the poor stability of the enzyme. In this study, multi-valent inorganic cerium oxide nanoparticles were used as detection elements for the analysis of hydrogen peroxide. The electrochemical response of the cerium oxide towards hydrogen peroxide analyte is defined through cyclic voltammetry and chronoamperometry....
Show moreElectrochemical biosensors often employ enzymes as detection elements. These sensors are highly selective towards target analytes, however the scope of their application is limited by the poor stability of the enzyme. In this study, multi-valent inorganic cerium oxide nanoparticles were used as detection elements for the analysis of hydrogen peroxide. The electrochemical response of the cerium oxide towards hydrogen peroxide analyte is defined through cyclic voltammetry and chronoamperometry. This response was found to be dependent on nanoparticle Ce3+:Ce4+ redox state ratio and this property is exploited to fabricate a biosensor. As produced, the biosensor demonstrated sensitivity at picomolar analyte concentrations. Further, the sensitivity of the electrode is stable across a range of temperatures and pH's which inhibit the function of standard enzyme-based sensors. Additionally, the produced sensor retained function in sheep serum demonstrating the high selectivity and robustness of the sensor.
Show less
Date Issued
2016
Identifier
CFE0006362, ucf:51540
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0006362
DETERMINATION OF THE HYDROGEN PEROXIDE CONCENTRATION IN ROTENONE INDUCED DOPAMINERGIC CELLS USING CYCLIC VOLTAMMETRY AND AMPLEX® RED
Title
DETERMINATION OF THE HYDROGEN PEROXIDE CONCENTRATION IN ROTENONE INDUCED DOPAMINERGIC CELLS USING CYCLIC VOLTAMMETRY AND AMPLEX® RED.
Creator
Patel, Kishan, Kim, Yoon, University of Central Florida
Abstract / Description
Parkinson's disease (PD) is a neurodegenerative condition that affects millions of people worldwide. The exact etiology of PD is unknown. However, it is well established that environmental factors contribute to the onset of PD. In particular, chemicals such as the insecticide Rotenone have been shown to increase the death of dopaminergic (DA) neurons by increasing levels of reactive oxygen species (ROS). ROS such as hydrogen peroxide (H2O2) have been shown to be elevated above basal levels in...
Show moreParkinson's disease (PD) is a neurodegenerative condition that affects millions of people worldwide. The exact etiology of PD is unknown. However, it is well established that environmental factors contribute to the onset of PD. In particular, chemicals such as the insecticide Rotenone have been shown to increase the death of dopaminergic (DA) neurons by increasing levels of reactive oxygen species (ROS). ROS such as hydrogen peroxide (H2O2) have been shown to be elevated above basal levels in PD patients. Currently, to measure H2O2 concentrations, a commercially available (Amplex® Red) fluorescent assay is used. However, the assay has limitations: it is not completely specific to hydrogen peroxide and can only measure extracellular ROS concentrations. This research focuses on testing an electrochemical sensor that uses cyclic voltammetry to quantitatively determine concentrations of H2O2 released from a cell culture. The sensor was first tested in normal cell culture conditions. Next, chemical interference was reduced and the sensor was optimized for accuracy by altering protein concentrations in the media. Finally, Rotenone was added to a cell culture to induce H2O2 production. Near real-time measurements of H2O2 were taken using the sensor and comparisons made to the fluorescent assay method. Overall, we are trying to determine if the electrochemical sensor can selectively and quantitatively measure H2O2 released from cells. Being able to track the production, migration and concentration of H2O2 in a cell can help researchers better understand its mechanism of action in cell death and oxidative damage, thus getting closer to finding a cure for PD.
Show less
Date Issued
2012
Identifier
CFH0004222, ucf:44921
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFH0004222
Cerium Oxide Nanoparticles Sensitize Pancreatic Cancer Cells to Radiation by Promoting Acidic pH, ROS, and JNK Dependent Apoptosis
Title
Cerium Oxide Nanoparticles Sensitize Pancreatic Cancer Cells to Radiation by Promoting Acidic pH, ROS, and JNK Dependent Apoptosis.
Creator
Wason, Melissa, Zhao, Jihe, Self, William, Altomare, Deborah, Baker, Cheryl, University of Central Florida
Abstract / Description
Side effects of radiation therapy (RT) remain the most challenging issue for pancreatic cancer treatment. In this report we determined whether and how cerium oxide nanoparticles (CONPs) sensitize pancreatic cancer cells to RT. CONP pretreatment enhanced radiation-induced reactive oxygen species (ROS) production preferentially in acidic cell-free solutions as well as acidic human pancreatic cancer cells. In acidic environments, CONPs favor the scavenging of superoxide radical over the hydroxyl...
Show moreSide effects of radiation therapy (RT) remain the most challenging issue for pancreatic cancer treatment. In this report we determined whether and how cerium oxide nanoparticles (CONPs) sensitize pancreatic cancer cells to RT. CONP pretreatment enhanced radiation-induced reactive oxygen species (ROS) production preferentially in acidic cell-free solutions as well as acidic human pancreatic cancer cells. In acidic environments, CONPs favor the scavenging of superoxide radical over the hydroxyl peroxide resulting in accumulation of the latter whereas in neutral pH CONPs scavenge both. CONP treatment prior to RT markedly potentiated the cancer cell apoptosis both in culture and in tumors and the inhibition of the pancreatic tumor growth without harming the normal tissues or host mice. Mechanistically, CONPs were not able to significantly impact RT-induced DNA damage in cancer cells, thereby ruling out sensitization through increased mitotic catastrophe. However, JNK activation, which is known to be a key driver of RT-induced apoptosis, was significantly upregulated by co-treatment with CONPs and RT in pancreatic cancer cells in vitro and human pancreatic tumors in nude mice in vivo compared to CONPs or RT treatment alone. Further, CONP-driven increase in RT-induced JNK activation was associated with marked increases in Caspase 3/7 activation, indicative of apoptosis. We have shown CONPs increase ROS production in cancer cells; ROS has been shown to drive the oxidation of thioredoxin (TRX) 1 which results in the activation of Apoptosis Signaling Kinase (ASK) 1. The dramatic increase in ASK1 activation following the co-treatment of pancreatic cancer cells with CONPs followed by RT in vitro suggests that increased the c-Jun terminal kinase (JNK) activation is the result of increased TRX1 oxidation. The ability of CONPs to sensitize pancreatic cancer cells to RT was mitigated when the TRX1 oxidation was prevented by mutagenesis of a cysteine residue, or the JNK activation was blocked by an inhibitor,. Additionally, angiogenesis in pancreatic tumors treated with CONPs and RT was significantly reduced compared to other treatment options. Taken together, these data demonstrate an important role and mechanisms for CONPs in specifically killing cancer cells and provide novel insight into the utilization of CONPs as a radiosensitizer and therapeutic agent for pancreatic cancer.
Show less
Date Issued
2013
Identifier
CFE0005116, ucf:50725
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0005116
Redox-Active Solid State Materials and its Biomedical and Biosensing Applications
Title
Redox-Active Solid State Materials and its Biomedical and Biosensing Applications.
Creator
Gupta, Ankur, Seal, Sudipta, Dong, Yajie, Cho, Hyoung Jin, Zhai, Lei, Schulte, Alfons, University of Central Florida
Abstract / Description
Reactive oxygen species (ROS) are byproducts of physiological processes in human body, and strengthened production of ROS is known to cause acute conditions such as inflammation, aging, Alzheimer's disease, melanoma and ovarian cancer, fibrosis and multiple sclerosis. Therefore, early detection of ROS at nanomolar concentration (at cellular level) and developing more potent antioxidants is essential for regular health monitoring. As an example, ROS are also responsible for inflammation...
Show moreReactive oxygen species (ROS) are byproducts of physiological processes in human body, and strengthened production of ROS is known to cause acute conditions such as inflammation, aging, Alzheimer's disease, melanoma and ovarian cancer, fibrosis and multiple sclerosis. Therefore, early detection of ROS at nanomolar concentration (at cellular level) and developing more potent antioxidants is essential for regular health monitoring. As an example, ROS are also responsible for inflammation reactions at orthopedic implants-tissue interface triggered by wear debris. Inflammation induced by ROS results in revision surgery. Coatings of redox-active materials exhibiting antioxidant properties on implants have potential to mitigate the inflammation and delay the need of revision surgery. This dissertation focus on developing advanced functional nanomaterials by tailoring the surface chemistry of existing materials. Surface chemistry of materials can be altered by introducing surface and edge defects in the lattice structure Three materials system doped cerium oxide nanoparticles (d-CNPs), cerium oxide thin films (CeOx) and molybdenum disulfide (MoS2) nanoparticles, have been studied for its surface and edge contributions in potential biomedical and biosensing applications. Surface (d-CNPs and CeOx thin films) and edge chemistry (MoS2) have been tailored to understand its role and specific response.Surface Ce3+/Ce4+ oxidation state in CNPs controls the bio-catalytic activity. Higher superoxide dismutase (SOD) is demonstrated by high Ce3+/Ce4+ oxidation state. On the other hand, improved catalase mimetic activity is observed for low Ce3+/Ce4+ CNPs. Different CNPs preparation results in different Ce3+ to Ce4+ ratio, particle size, surface coating, and agglomeration, thus significantly varying the antioxidant properties of CNPs. In the first section of the dissertation, sustainable one-step room temperature synthesis of rare earth element (La, Sm, and Er) d-CNPs have been developed to effectively control the Ce3+ to Ce4+ ratio for specific biological application. Substitution of Ce4+ ions by trivalent dopants from ceria lattice increases the oxygen vacancies and density of catalytic sites. Uniform distribution of trivalent dopant in ceria lattice confirmed by EFTEM is attributed to enhanced SOD mimetic activity, ROS scavenging and tuning surface Ce3+/Ce4+ oxidation state in CNPs. Surface chemistry of redox-active cerium oxide coating on orthopedic implants also plays a vital role in scavenging ROS and mitigating inflammation. Thus, surface chemistry of CeOx thin films deposited by atomic layer deposited (ALD), have also been tailored by controlling the film thickness. CeOx film of 2 nm thickness has high Ce3+/Ce4+ (ratio 1) whereas higher thickness films (6-33 nm) have lower Ce3+/Ce4+ (ratio 0.30-0.37). These films have been further tested for catalase mimetic activity and hydrogen peroxide (H2O2) detection. Sensor selectivity is always a key issue. Most often, ascorbic acid found in the biological system, interfere in the electrochemical detection of H2O2 resulting in selectivity issue, thus protective Nafion layer is required to prevent cerium oxide-ascorbic acid interaction.To improve the selectivity of electrochemical sensors, Sulfur-deficient redox-active MoS2 have been utilized for electrochemical detection of pharmaceutically relevant chemical species. S-deficient MoS2 nanoparticles have been prepared by liquid exfoliation method to increase Mo-edge density and tested as sensing materials for detection of pharmaceutically relevant H2O2, hypochlorous acid (HOCl) and reactive nitrogen (NO*) species. The addition of ascorbic acid and uric acid have shown no interference during H2O2 detection. Change in S to Mo ratio have been studied using x-ray photoelectron spectroscopy. Density functional theory (DFT) have been employed to understand the detection mechanism and size-dependent sensitivity of MoS2. DFT study further reveals the role of S-deficiency and Mo- and S-edges in the higher catalytic activity of 5-7 nm MoS2 particles.Through these studies, the importance of defects in nanomaterials and their exotic properties at the nanoscale have been demonstrated. Understanding developed from these studies have provided the framework to develop more advanced functional nanomaterials for biomedical and biosensing applications.
Show less
Date Issued
2017
Identifier
CFE0006944, ucf:51655
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0006944
Synthesis and Study of Chemo-Hydrothermally Derived Water-Soluble Chitosan and Chiosan-Metal Oxide Composites
Title
Synthesis and Study of Chemo-Hydrothermally Derived Water-Soluble Chitosan and Chiosan-Metal Oxide Composites.
Creator
Basumallick, Srijita, Santra, Swadeshmukul, Kolpashchikov, Dmitry, Zou, Shengli, Ye, Jingdong, Seal, Sudipta, University of Central Florida
Abstract / Description
Chitosan (CS) is a man-made sugar based biopolymer derived from chitin, the second most abundant natural polymer after cellulose. Chitin is sourced from crustacean species such as shrimps and crabs. The chemical structure of chitin contains N-Acetyl D-glucosamine monomer units which forms CS upon deacetylation. In CS, ?-(1-4) linked D-glucosamine units are randomly distributed. Approximately 75% - 80% sugar units contains primary amine groups in commercially available low molecular weight CS....
Show moreChitosan (CS) is a man-made sugar based biopolymer derived from chitin, the second most abundant natural polymer after cellulose. Chitin is sourced from crustacean species such as shrimps and crabs. The chemical structure of chitin contains N-Acetyl D-glucosamine monomer units which forms CS upon deacetylation. In CS, ?-(1-4) linked D-glucosamine units are randomly distributed. Approximately 75% - 80% sugar units contains primary amine groups in commercially available low molecular weight CS. Biodegradability, low toxicity, mucoadhesive and transfecting properties of CS polymer are attractive for applications as oral and nasal drug delivery systems. Chitosan polymer is water insoluble at neutral pH. To solubilize CS, dilute mineral acid (such as hydrochloric acid and nitric acid) or organic acid (such as acetic acid) is often used. CS contains both hydroxyl and primary amine groups in its structure. In acidic solution, the amine functional groups become protonated (positively charged). Positively charged CS remains stable only in low pH condition due to electrostatic repulsion of charged polymer segments. Therefore, by using a suitable anionic (negatively charged) cross-linker, stable CS particles (such as nanoparticles and microspheres) can be prepared. This is popularly known as ionic gelation method. Extensive studies have been done on the synthesis of drug loaded CS particles where particle integrity is maintained by ionic gelation using tripolyphosphate (TPP, an anionic cross-linker). Drug encapsulated CS-TPP composite particles are shown to maintain biodegradability and biocompatibility. The CS-TPP composite particles exhibits very limited dispersibility at neutral pH conditions specifically in neutral buffered conditions. A number of biomedical applications (including systemic drug formulations) however demands buffer-stable CS composite particles for achieving optimal therapeutic outcome.To overcome the above dispersibility issues, CS polymer and CS particles units have been chemically modified using water soluble motifs (such as water soluble polymer or ligands). This approach is very cumbersome and usually involves multiple purification steps. Chemical modification of natural CS chain introduces risks of compromising biodegradability and biocompatibility. Therefore, there is a strong need for developing a straightforward method of making water soluble CS and CS particles.Chapter 1 of this dissertation presents an overview of the CS polymer, various applications of CS polymers, methods of making CS polymers and CS particles, current limitations of synthesis methods for preparing stable chitosan particles at neutral pH conditions and finally delineates the scope of the proposed research work.Chapter 2 describes development of chemo-hydrothermal synthesis method for producing water soluble CS polymer and water dispersible CS composite particles. In this method, a chemical (depolymerizing agent) is used to treat CS polymer in a hydrothermal (high temperature and high pressure) condition. Two types of depolymerizing agents have been used, an inorganic acid (e.g. hydrochloric acid, HCl) and a bicarboxylic organic acid (e.g. tartaric acid, TA). In both cases, 100% depolymerized CS polymer was obtained. Chemical characteristics of the depolymerized CS were comparable to acid solubilized CS. CS polymer exhibits weak fluorescence. Interestingly, hydrothermally depolymerized CS shows strong fluorescence properties irrespective of the nature of depolymerizing agent used. TA not only depolymerized CS but also formed CS-TA composite particulate structures in solution via self-assembly. The CS-TA composite particles are stable in a wide pH range from 5 to 11. Detailed spectroscopic and microscopic studies have been done to understand the basic mechanism of particle formation and increase in fluorescence properties (i.e. structure-property relationship). Usefulness of CS-TA in solubilizing water-insoluble cargos (such as fluorescein isothiocyanate, FITC) has been demonstrated.Chapter 3 is focused on hydrothermal synthesis of mixed-valence copper (Cu) oxide loaded CS-TA composite particles and their characterization. Crystalline Cu oxide nanoparticles were coated with the CS-TA layer. Water dispersibility of Cu oxide greatly improved upon coating with CS-TA material. To demonstrate catalytic activity of Cu-oxide loaded CS-TA film in sequestering carbon dioxide (CO2), an electrochemical setup was used. Electrochemical reduction of CO2 was successfully demonstrated. It was observed that CS-TA environment not only maintained catalytic properties of Cu oxide but also allowed solution processing of Cu-oxide film onto the electrode surface.Chapter 4 discusses a convenient method of making monodispersed water dispersible Cu loaded chitosan nanoparticles (Cu-CS) using HCl depolymerized CS polymer. The purpose of this study was to investigate if there was any improvement in antibacterial properties of Cu-CS nanoparticles prepared using hydrothermally treated CS polymer. Interestingly, it was observed that the antibacterial efficacy of Cu was not compromised in Cu-CS nanoparticles. Moreover, the materials exhibited improvement in antibacterial efficacy against both Gram-negative and Gram-positive bacteria species. A plausible mechanism has been proposed to explain antibacterial results.Chapter 5 summarizes major findings of this dissertation research and presents future research directions.
Show less
Date Issued
2014
Identifier
CFE0005461, ucf:50395
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0005461
Development of Novel Redox Sensors and Processes Towards Biological Applications
Title
Development of Novel Redox Sensors and Processes Towards Biological Applications.
Creator
Patel, Jigna, Yestrebsky, Cherie, Clausen, Christian, Hampton, Michael, Harper, James, Diaz, Diego, University of Central Florida
Abstract / Description
Research on the cure and early detection of diseases such as diabetes, Alzheimer's, and Parkinson's is becoming of great interest due to the increasing number of people affected by them every year. An accurate and quick detection of various damaging species is highly critical in treatments of such diseases not only for exploring possible cures but also for early detection. If these diseases are detected during the initial stages than the possibility of curing them is much higher. Motivated by...
Show moreResearch on the cure and early detection of diseases such as diabetes, Alzheimer's, and Parkinson's is becoming of great interest due to the increasing number of people affected by them every year. An accurate and quick detection of various damaging species is highly critical in treatments of such diseases not only for exploring possible cures but also for early detection. If these diseases are detected during the initial stages than the possibility of curing them is much higher. Motivated by this, many researchers today have developed numerous types of sensing devices that can detect various physiological and biological compounds. However, most of these sensors are enzyme based. They have several setbacks such as the lack of sensitivity, restricted selectivity, short shelf life, and biological fouling. To overcome these obstacles, we examine the use of nanoceria modified Pt and Au electrodes for the detection of glucose and reactive oxygen species such as hydrogen peroxide. Amperometric detection of glucose and hydrogen peroxide is critical for biological applications for diabetes and possible Alzheimer's and Parkinson's patients. This dissertation focuses on the exploration of non-enzymatic detection of glucose and reactive oxygen species which has the prospective to be used for biological applications, in addition to an investigation of an odor control technology that uses these reactive oxygen species for the treatment of wastewater plants. The combination of bi-metallic composites with nanoceria showed increased oxidation ability towards glucose and hydrogen peroxide. The following dissertation expands on the relationship between bi-metallic nanoceria composite materials and its electro-oxidation of glucose and hydrogen peroxide towards biological sensing along with an investigation of an odor control technology that utilizes generates hydroxyl radical fine particle mist for the degradation of hydrogen sulfide odor in wastewater treatment plants.
Show less
Date Issued
2013
Identifier
CFE0005227, ucf:50585
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0005227