Current Search:  Thermal Conduction Switch (x)

View All Items

  • CSV Spreadsheet
(1 - 2 of 2)
COMMISSIONING OF AN ARC-MELTING / VACUUM QUENCH FURNACE FACILITY FOR FABRICATION OF NI-TI-FE SHAPE MEMORY ALLOYS, AND THEIR CHARACTERIZATION
Title
COMMISSIONING OF AN ARC-MELTING / VACUUM QUENCH FURNACE FACILITY FOR FABRICATION OF NI-TI-FE SHAPE MEMORY ALLOYS, AND THEIR CHARACTERIZATION.
Creator
Singh, Jagat, Vaidyanathan, Raj, University of Central Florida
Abstract / Description
Shape memory alloys when deformed can produce strains as high as 8%. Heating results in a phase transformation and associated recovery of all the accumulated strain, a phenomenon known as shape memory. This strain recovery can occur against large forces, resulting in their use as actuators. The goal of this project is to lower the operating temperature range of shape memory alloys in order for them to be used in cryogenic switches, seals, valves, fluid-line repair and self-healing gaskets for...
Show moreShape memory alloys when deformed can produce strains as high as 8%. Heating results in a phase transformation and associated recovery of all the accumulated strain, a phenomenon known as shape memory. This strain recovery can occur against large forces, resulting in their use as actuators. The goal of this project is to lower the operating temperature range of shape memory alloys in order for them to be used in cryogenic switches, seals, valves, fluid-line repair and self-healing gaskets for space related technologies. The Ni-Ti-Fe alloy system, previously used in Grumman F-14 aircrafts and activated at 120 K, is further developed through arc-melting a range of compositions and subsequent thermo-mechanical processing. A controlled atmosphere arc-melting facility and vertical vacuum quench furnace facility was commissioned to fabricate these alloys. The facility can create a vacuum of 10-7 Torr and heat treat samples up to 977 °C. High purity powders of Ni, Ti and Fe in varying ratios were mixed and arc-melted into small buttons weighing 0.010 kg to 0.025 kg. The alloys were subjected to solutionizing and aging treatments. A combination of rolling, electro-discharge machining and low-speed cutting techniques were used to produce strips. Successful rolling experiments highlighted the workability of these alloys. The shape memory effect was successfully demonstrated at liquid nitrogen temperatures through a constrained recovery experiment that generated stresses of over 40 MPa. Differential scanning calorimetry (DSC) and a dilatometry setup was used to characterize the fabricated materials and determine relationships between composition, thermo-mechanical processing parameters and transformation temperatures.
Show less
Date Issued
2004
Identifier
CFE0000308, ucf:46320
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0000308
DESIGN, FABRICATION AND TESTING OF A SHAPE MEMORY ALLOY BASED CRYOGENIC THERMAL CONDUCTION SWITCH
Title
DESIGN, FABRICATION AND TESTING OF A SHAPE MEMORY ALLOY BASED CRYOGENIC THERMAL CONDUCTION SWITCH.
Creator
Krishnan, Vinu Bala, Vaidyanathan, Raj, University of Central Florida
Abstract / Description
Shape memory alloys (SMAs) can recover large strains (e.g., up to 8%) by undergoing a temperature-induced phase transformation. This strain recovery can occur against large forces, resulting in their use as actuators. The SMA elements in such actuators integrate both sensory and actuation functions. This is possible because SMAs can inherently sense a change in temperature and actuate by undergoing a shape change, associated with the temperature-induced phase transformation. The objective of...
Show moreShape memory alloys (SMAs) can recover large strains (e.g., up to 8%) by undergoing a temperature-induced phase transformation. This strain recovery can occur against large forces, resulting in their use as actuators. The SMA elements in such actuators integrate both sensory and actuation functions. This is possible because SMAs can inherently sense a change in temperature and actuate by undergoing a shape change, associated with the temperature-induced phase transformation. The objective of this work is to develop an SMA based cryogenic thermal conduction switch for operation between dewars of liquid methane and liquid oxygen in a common bulk head arrangement for NASA. The design of the thermal conduction switch is based on a biased, two-way SMA actuator and utilizes a commercially available NiTi alloy as the SMA element to demonstrate the feasibility of this concept. This work describes the design from concept to implementation, addressing methodologies and issues encountered, including: a finite element based thermal analysis, various thermo-mechanical processes carried out on the NiTi SMA elements, and fabrication and testing of a prototype switch. Furthermore, recommendations for improvements and extension to NASA's requirements are presented. Such a switch has potential application in variable thermal sinks to other cryogenic tanks for liquefaction, densification, and zero boil-off systems for advanced spaceport applications. The SMA thermal conduction switch offers the following advantages over the currently used gas gap and liquid gap thermal switches in the cryogenic range: (i) integrates both sensor and actuator elements thereby reducing the overall complexity, (ii) exhibits superior thermal isolation in the open state, and (iii) possesses high heat transfer ratios between the open and closed states. This work was supported by a grant from NASA Kennedy Space Center (NAG10-323) with William U. Notardonato as Technical Officer.
Show less
Date Issued
2004
Identifier
CFE0000038, ucf:46136
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0000038