View All Items
(1 - 11 of 11)
- Title
- EXPERIMENTAL AND NUMERICAL INVESTIGATIONS OF MICRODROPLET EVAPORATION WITH A FORCED PINNED CONTACT LINE.
- Creator
-
Gleason, Kevin, Putnam, Shawn, University of Central Florida
- Abstract / Description
-
Experimental and numerical investigations of water microdroplet evaporation on heated, laser patterned polymer substrates are reported. The study is focused on both (1) validating numerical models with experimental data, (2) identifying how changes in the contact line influences evaporative heat transfer and (3) determining methods of controlling contact line dynamics during evaporation. Droplets are formed using a bottom-up methodology, where a computer-controlled syringe pump supplies water...
Show moreExperimental and numerical investigations of water microdroplet evaporation on heated, laser patterned polymer substrates are reported. The study is focused on both (1) validating numerical models with experimental data, (2) identifying how changes in the contact line influences evaporative heat transfer and (3) determining methods of controlling contact line dynamics during evaporation. Droplets are formed using a bottom-up methodology, where a computer-controlled syringe pump supplies water to a ~200 um in diameter fluid channel within the heated substrate. This methodology facilitates precise control of the droplets growth rate, size, and inlet temperature. In addition to this microchannel supply line, the substrate surfaces are laser patterned with a moat-like trench around the fluid-channel outlet, adding additional control of the droplets contact line motion, area, and contact angle. In comparison to evaporation on non-patterned substrate surfaces, this method increases the contact line pinning time by ~60% of the droplets lifetime. The evaporation rates are compared to the predictions of a commonly reported model based on a solution of the Laplace equation, providing the local evaporation flux along the droplets liquid-vapor interface. The model consistently overpredicts the evaporation rate, which is presumable due to the models constant saturated vapor concentration along the droplets liquid-vapor interface. In result, a modified version of the model is implemented to account for variations in temperature along the liquid-vapor interface. A vapor concentration distribution is then imposed using this temperature distribution, increasing the accuracy of predicting the evaporation rate by ~7.7% and ~9.9% for heated polymer substrates at Ts = 50C and 65C, respectively.
Show less - Date Issued
- 2014
- Identifier
- CFH0004566, ucf:45212
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFH0004566
- Title
- Cavitation and heat transfer over micro pin fins.
- Creator
-
Nayebzadeh, Arash, Peles, Yoav, Chow, Louis, Kassab, Alain, Plawsky, Joel, University of Central Florida
- Abstract / Description
-
With the dramatic increase in the usage of compact yet more powerful electronic devices, advanced cooling technologies are required to maintain delicate electronic components below their maximum allowable temperatures and prevent them from failure. One solution is to use innovative pin finned heat sinks. This research is centered on the evaluation of hydrodynamic cavitation properties downstream pin fins and extended toward single-phase heat transfer enhancement of array of pin fins in...
Show moreWith the dramatic increase in the usage of compact yet more powerful electronic devices, advanced cooling technologies are required to maintain delicate electronic components below their maximum allowable temperatures and prevent them from failure. One solution is to use innovative pin finned heat sinks. This research is centered on the evaluation of hydrodynamic cavitation properties downstream pin fins and extended toward single-phase heat transfer enhancement of array of pin fins in microchannel. In this work, transparent micro-devices capable of local wall temperature measurements were micro fabricated and tested. Various experimental methods, numerical modeling and advanced data processing techniques are presented. Careful study over cavitation phenomena and heat transfer measurement downstream pin fins were performed.Hydrodynamic cavitation downstream a range of micro pillar geometries entrenched in a microchannel were studied. Three modes of cavitation inception were observed and key parameters of cavitation processes, such as cavity length and angle of attachment, were compared among various micro pillar geometries. Cavity angle of attachments were predominantly related to the shape of the micro pillar. Fast Fourier transformation (FFT) analysis of the cavity image intensity revealed transverse cavity shedding frequencies in various geometries and provided an estimation for vortex shedding frequencies.Experimental and numerical heat transfer studies over array of pin fins were carried out to find out the influence of lateral interactions of fluid flow on the enhancement of heat transfer. Local temperature measurements combined with a conjugate fluid flow and heat transfer modeling revealed the underlying heat transfer mechanisms over pin fin arrays.
Show less - Date Issued
- 2019
- Identifier
- CFE0007690, ucf:52407
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0007690
- Title
- LASER METALLIZATION AND DOPING FOR SILICON CARBIDE DIODE FABRICATION AND ENDOTAXY.
- Creator
-
Tian, Zhaoxu, Kar, Aravinda, University of Central Florida
- Abstract / Description
-
Silicon carbide is a promising semiconductor material for high voltage, high frequency and high temperature devices due to its wide bandgap, high breakdown electric field strength, highly saturated drift velocity of electrons and outstanding thermal conductivity. With the aim of overcoming some challenges in metallization and doping during the fabrication of silicon carbide devices, a novel laser-based process is provided to direct metallize the surface of silicon carbide without metal...
Show moreSilicon carbide is a promising semiconductor material for high voltage, high frequency and high temperature devices due to its wide bandgap, high breakdown electric field strength, highly saturated drift velocity of electrons and outstanding thermal conductivity. With the aim of overcoming some challenges in metallization and doping during the fabrication of silicon carbide devices, a novel laser-based process is provided to direct metallize the surface of silicon carbide without metal deposition and dope in silicon carbide without high temperature annealing, as an alternative to the conventional ion implantation, and find applications of this laser direct write metallization and doping technique on the fabrication of diodes, endotaxial layer and embedded optical structures on silicon carbide wafers. Mathematical models have been presented for the temperature distributions in the wafer during laser irradiation to optimize laser process parameters and understand the doping and metallization mechanisms in laser irradiation process. Laser irradiation of silicon carbide in a dopant-containing ambient allows to simultaneously heating the silicon carbide surface without melting and incorporating dopant atoms into the silicon carbide lattice. The process that dopant atoms diffuse into the bulk silicon carbide by laser-induced solid phase diffusion (LISPD) can be explained by considering the laser enhanced substitutional and interstitial diffusion mechanisms. Nitrogen and Trimethyaluminum (TMA) are used as dopants to produce n-type and p-type doped silicon carbide, respectively. Two laser doping methods, i.e., internal heating doping and surface heating doping are presented in this dissertation. Deep (800 nm doped junction for internal heating doping) and shallow (200 nm and 450 nm doped junction for surface heating doping) can be fabricated by different doping methods. Two distinct diffusion regions, near-surface and far-surface regions, were identified in the dopant concentration profiles, indicating different diffusion mechanisms in these two regions. The effective diffusion coefficients of nitrogen and aluminum were determined for both regions by fitting the diffusion equation to the measured concentration profiles. The calculated diffusivities are at least 6 orders of magnitude higher than the typical values for nitrogen and aluminum, which indicate that laser doping process enhances the diffusion of dopants in silicon carbide significantly. No amorphization was observed in laser-doped samples eliminating the need for high temperature annealing. Laser direct metallization can be realized on the surface of silicon carbide by generating metal-like conductive phases due to the decomposition of silicon carbide. The ohmic property of the laser direct metallized electrodes can be dramatically improved by fabricating such electrodes on laser heavily doped SiC substrate. This laser-induced solid phase diffusion technique has been utilized to fabricate endolayers in n-type 6H-SiC substrates by carbon incorporation. X-ray energy dispersive spectroscopic analysis shows that the thickness of endolayer is about 100 nm. High resolution transmission electron microscopic images indicate that the laser endotaxy process maintains the crystalline integrity of the substrate without any amorphization. Rutherford backscattering studies also show no amorphization and evident lattice disorder occur during this laser solid phase diffusion process. The resistivity of the endolayer formed in a 1.55 omega•cm silicon carbide wafer segment was found to be 1.1E5 omega•cm which is sufficient for device fabrication and isolation. Annealing at 1000 oC for 10 min to remove hydrogen resulted in a resistivity of 9.4E4 omega•cm. Prototype silicon carbide PIN diodes have been fabricated by doping the endolayer and parent silicon carbide epilayer with aluminum using this laser-induced solid phase diffusion technique to create p-regions on the top surfaces of the substrates. Laser direct metallized contacts were also fabricated on selected PIN diodes to show the effectiveness of these contacts. The results show that the PIN diode fabricated on a 30 nm thick endolayer can block 18 V, and the breakdown voltages and the forward voltages drop at 100 A/cm2 of the diodes fabricated on 4H-SiC with homoepilayer are 420 ~ 500 V and 12.5 ~ 20 V, respectively. The laser direct metallization and doping technique can also be used to synthesize embedded optical structures, which can increase 40% reflectivity compared to the parent wafer, showing potential for the creation of optical, electro-optical, opto-electrical, sensor devices and other integrated structures that are stable in high temperature, high-pressure, corrosive environments and deep space applications.
Show less - Date Issued
- 2006
- Identifier
- CFE0001061, ucf:46803
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0001061
- Title
- Investigation of Flow Field Structures in a Rectangular Channel with a Pin Fin Array.
- Creator
-
Tran, Patrick, Kapat, Jayanta, Bhattacharya, Samik, Huang, Helen, University of Central Florida
- Abstract / Description
-
Pin fin arrays are commonly found in heat exchangers, turbine blades, and electronic heat sinks. Fin arrays are extended surfaces that are used as turbulence promoters by inducing horseshoe vortex (HSV) and von Karman vortex (KV) structures. The horseshoe vortex are primarily studied in the leading edge of the blunt body, whereas the KV are formed in the trailing side. This study presents an experimental investigation of flow field structures and pressure loss on staggered pin fin array in...
Show morePin fin arrays are commonly found in heat exchangers, turbine blades, and electronic heat sinks. Fin arrays are extended surfaces that are used as turbulence promoters by inducing horseshoe vortex (HSV) and von Karman vortex (KV) structures. The horseshoe vortex are primarily studied in the leading edge of the blunt body, whereas the KV are formed in the trailing side. This study presents an experimental investigation of flow field structures and pressure loss on staggered pin fin array in the wake region, where KV are dominate. These flow structures increase the local levels turbulence and generate eddies that promote flow mixing, which in turn allows for higher levels of heat transfer. Improvement in heat transfer can increase the efficiency of the heat exchanger by reducing the thermal load and stress on the components which can extended product life. A study of the vortex shedding using a Particle Image Velocimetry (PIV) technique is used to measure flow field using a closed loop vertical water tunnel. A Time Resolved Particle Image Velocimetry (TR-PIV) study for both steady and unsteady flow structures in the fully developed region of a pin fin array at multiple wall normal cross sections are performed. The pin fin array consists of circular pin fins with 8 rows of 7.5 pins in rectangular channel with Reynolds number varying from 10,000 to 20,000. The Pin array is in a staggered configuration with stream wise (Y/D) spacing of 2.5 and span wise (X/D) spacing of 2.5, and height to pin diameter (H/D) of 2. A supplemental computation fluid dynamic (CFD) study is also for comparison with the PIV flow field. The goal of the present study is to determine the major vortex structures that found the flow at different Z/D, quantify parameters that numerical methods are unable to solve, and provide a base line for other parameters that can be used to improve the accuracy of numerical models. The novelty of this work is to provide data and characterize the near the viscous sub layer of Z/D =0.
Show less - Date Issued
- 2019
- Identifier
- CFE0007736, ucf:52446
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0007736
- Title
- Improving Turbine Performance: A Contribution to the Understanding of Heat Transfer and Vortical Structures in Staggered Pin Fin Arrays.
- Creator
-
Otto, Marcel, Kapat, Jayanta, Ahmed, Kareem, Bhattacharya, Samik, Kinzel, Michael, Wiegand, Rudolf, University of Central Florida
- Abstract / Description
-
Through the comparison of flow structures, velocity contours, turbulence statistics, and additional flow quantities, the error sources of RANS are qualitatively described. The findings in this work will help gas turbine design engineers to tweak their turbulence models and give guidance on the interpretation of their results. The novelty is the application of the transient TLC method on this type of geometry as well as the near-wall PIV measurements. The advancements in additive manufacturing...
Show moreThrough the comparison of flow structures, velocity contours, turbulence statistics, and additional flow quantities, the error sources of RANS are qualitatively described. The findings in this work will help gas turbine design engineers to tweak their turbulence models and give guidance on the interpretation of their results. The novelty is the application of the transient TLC method on this type of geometry as well as the near-wall PIV measurements. The advancements in additive manufacturing disrupt the classic turbine cooling development for casted airfoils. More and more complicated shapes and cooling schemes are possible. Nonetheless, a detailed physical understanding of fundamental cases - as provided in this study - is required for physics-based optimization of cooling designs.
Show less - Date Issued
- 2019
- Identifier
- CFE0007848, ucf:52803
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0007848
- Title
- Customizable Antenna Array Using Reconfigurable Antenna Elements.
- Creator
-
Shirazi, Mahmoud, Gong, Xun, Wahid, Parveen, Jones, W Linwood, Abdolvand, Reza, Kuebler, Stephen, University of Central Florida
- Abstract / Description
-
A shared-aperture reconfigurable slot-ring antenna array switching between different frequency bands and polarizations is presented for phased array applications. PIN diode switches are incorporated into the slots of the antenna to change the state of the reconfigurable slot-ring antenna array. Each frequency band has its own feeding lines which allows for the use of high-performance narrow-band transmit/receive (T/R) modules instead of ultra wideband (UWB) T/R modules. Furthermore, the...
Show moreA shared-aperture reconfigurable slot-ring antenna array switching between different frequency bands and polarizations is presented for phased array applications. PIN diode switches are incorporated into the slots of the antenna to change the state of the reconfigurable slot-ring antenna array. Each frequency band has its own feeding lines which allows for the use of high-performance narrow-band transmit/receive (T/R) modules instead of ultra wideband (UWB) T/R modules. Furthermore, the spacing between the elements in each frequency band is less than half free-space wavelength (?0) over the frequency band of operation which enables grating-lobe-free beam scanning. This is the first shared-aperture reconfigurable dual-polarized antenna with separate feeding for each band which is scalable to a larger array with element spacing of less than 0.5?0 in all frequency bands of operation.First, a switchable-band reconfigurable antenna array switching between L and C bands is presented. This antenna operates at 1.76/5.71 GHz with a fractional bandwidth (FBW) of 8.6%/11.5%, realized gain of 0.1/4.2 dBi and radiation efficiency of 66.6%/80.7% in the L-/C- band operating states, respectively. Second, a wideband version of the reconfigurable antenna element using fractal geometries is presented. This dual-polarized antenna element is switching between S and C bands with wide bandwidth in each operating state. In the S-/C-band operating state, this antenna shows 69.1%/58.3% FBW with a maximum realized gain of 2.4/3.1 dBi. Third, the wideband antenna element is extended to an antenna array. The reconfigurable dual-polarized antenna array with vertical coaxial feeding switches between S- and C-band states with full-band coverage. A 2(&)#215;2 S-band antenna array can be reconfigured to a 4(&)#215;4 C-band antenna array by activating/deactivating PIN diode switches. This antenna array shows 64.3%/66.7% FBW with 8.4/14.3 dBi maximum realized gain in the S-/C-band operating states, respectively. Finally, a reconfigurable antenna element covering three adjacent frequency bands is presented. The FBW of this tri-band antenna element is 75%/63%/26% in the S/C/X band state.
Show less - Date Issued
- 2018
- Identifier
- CFE0007373, ucf:52092
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0007373
- Title
- PRESSURE DROP AND ENDWALL HEAT TRANSFER EFFECTS OF POROUS TURBULATORS IN A RECTANGULAR CHANNEL.
- Creator
-
Pent, Jared, Kapat, Jay, University of Central Florida
- Abstract / Description
-
This study examines the local and averaged endwall heat transfer effects of a staggered array of porous pin fins within a rectangular channel. The porous pin fins were made from aluminum and had a pore density of 10 pores per inch (PPI). The pressure drop through the channel was also determined for several flow rates and presented in terms of the friction factor. Local heat transfer coefficients on the endwall were measured using Thermochromic Liquid Crystal (TLC) sheets recorded with a...
Show moreThis study examines the local and averaged endwall heat transfer effects of a staggered array of porous pin fins within a rectangular channel. The porous pin fins were made from aluminum and had a pore density of 10 pores per inch (PPI). The pressure drop through the channel was also determined for several flow rates and presented in terms of the friction factor. Local heat transfer coefficients on the endwall were measured using Thermochromic Liquid Crystal (TLC) sheets recorded with a charge-coupled device (CCD) camera. Static and total pressure measurements were taken at the entrance and exit of the test section to determine the overall pressure drop through the channel and explain the heat transfer trends through the channel. Results are presented for Reynolds numbers between 25000 and 130000 and a blockage ratio (blocked channel area divided by open channel area) of 50%. All results were compared to the corresponding results obtained using solid pins. All experiments were carried out in a 150 mm by 500 mm channel with an X/D of 1.72, a Y/D of 2.0, and a Z/D of 1.72 for the porous pins. It was found that for the range of Reynold's numbers tested in this study, the porous pin array consistently resulted in a larger friction factor, and therefore greater losses than a geometrically similar array of solid pins. The friction factors for the solid pin array were between 9.5 and 10.5, similar to the results found in the literature. For the porous pins, however, the friction factors were significantly increased as the Reynold's number increased, reaching as high as 15.3 at the highest Reynold's number tested. The heat transfer enhancement for the porous pins was found to be between 150 and 170% while the solid pins resulted in a heat transfer enhancement between 190 and 230%.
Show less - Date Issued
- 2009
- Identifier
- CFE0002819, ucf:48085
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0002819
- Title
- Microgrid Control and Protection: Stability and Security.
- Creator
-
Keshavarztalebi, Morteza, Behal, Aman, Haralambous, Michael, Sun, Wei, Jain, Amit Kumar, Kutkut, Nasser, University of Central Florida
- Abstract / Description
-
When the microgrid disconnects from the main grid in response to, say, upstream disturbance orvoltage fluctuation and goes to islanding mode, both voltage and frequency at all locations in themicrogrid have to be regulated to nominal values in a short amount of time before the operation ofprotective relays. Motivated by this, we studied the application of intelligent pinning of distributed cooperative secondary control of distributed generators in islanded microgrid operation in a power...
Show moreWhen the microgrid disconnects from the main grid in response to, say, upstream disturbance orvoltage fluctuation and goes to islanding mode, both voltage and frequency at all locations in themicrogrid have to be regulated to nominal values in a short amount of time before the operation ofprotective relays. Motivated by this, we studied the application of intelligent pinning of distributed cooperative secondary control of distributed generators in islanded microgrid operation in a power system. In the first part, the problem of single and multi-pinning of distributed cooperative secondary control of DGs in a microgrid is formulated. It is shown that the intelligent selection of a pinning set based on the number of its connections and distance of leader DG/DGs from the rest of the network, i.e., degree of connectivity, strengthens microgrid voltage and frequency regulation performance both in transient and steady state. The proposed control strategy and algorithm are validated by simulation in MATLAB/SIMULINK using different microgrid topologies. It is shown that it is much easier to stabilize the microgrid voltage and frequency in islanding mode operationby specifically placing the pinning node on the DGs with high degrees of connectivity than byrandomly placing pinning nodes into the network. In all of these research study cases, DGs areonly required to communicate with their neighboring units which facilitates the distributed controlstrategy.Historically, the models for primary control are developed for power grids with centralized powergeneration, in which the transmission lines are assumed to be primarily inductive. However, fordistributed power generation, this assumption does not hold since the network has significant resistive impedance as well. Hence, it is of utmost importance to generalize the droop equations, i.e., primary control, to arrive at a proper model for microgrid systems. Motivated by this, we proposed the secondary adaptive voltage and frequency control of distributed generators for low and medium voltage microgrid in autonomous mode to overcome the drawback of existing classical droop based control techniques. Our proposed secondary control strategy is adaptive with line parameters and can be applied to all types of microgrids to address the simultaneous impacts of active and reactive power on the microgrids voltage and frequency. Also, since the parameters in the network model are unknown or uncertain, the second part of our research studies adaptive distributed estimation/compensation. It is shown that this is an effective method to robustly regulate the microgrid variables to their desired values.The security of power systems against malicious cyberphysical data attacks is the third topic of this dissertation. The adversary always attempts to manipulate the information structure of the power system and inject malicious data to deviate state variables while evading the existing detection techniques based on residual test. The solutions proposed in the literature are capable of immunizing the power system against false data injection but they might be too costly and physically not practical in the expansive distribution network. To this end, we define an algebraic condition for trustworthy power system to evade malicious data injection. The proposed protection scheme secures the power system by deterministically reconfiguring the information structure and corresponding residual test. More importantly, it does not require any physical effort in either microgrid or network level. The identification scheme of finding meters being attacked is proposed as well. Eventually, a well-known IEEE 30-bus system is adopted to demonstrate the effectiveness of the proposed schemes.
Show less - Date Issued
- 2016
- Identifier
- CFE0006338, ucf:51569
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0006338
- Title
- Investigation of Novel Fin Structures Enhancing Micro Heat Sink Thermal Performance.
- Creator
-
Ismayilov, Fuad, Peles, Yoav, Kassab, Alain, Putnam, Shawn, Akturk, Ali, University of Central Florida
- Abstract / Description
-
Operating temperature in electronics applications is continuously increasing. Therefore, for the past few decades, high heat flux removing micro heat sinks are investigated in terms of heat transfer effectiveness. This study generally concentrates on improving the passive heat transfer techniques. Micro heat sinks used in experiments are fabricated using MEMS techniques. Resistance temperature detectors, RTDs, were used for temperature measurements. The experimental data was obtained for...
Show moreOperating temperature in electronics applications is continuously increasing. Therefore, for the past few decades, high heat flux removing micro heat sinks are investigated in terms of heat transfer effectiveness. This study generally concentrates on improving the passive heat transfer techniques. Micro heat sinks used in experiments are fabricated using MEMS techniques. Resistance temperature detectors, RTDs, were used for temperature measurements. The experimental data was obtained for single and two phase flow regions; however, only single phase flow results were considered in numerical simulations. Numerical validations were performed on the micro heat sinks, including cylinder and hydrofoil shaped pin fins. Following the validation phase, optimization has been performed to further improve the hydraulic and thermal performance. DOE study showed that the chord length and leading edge size of the hydrofoil pin fin are significant contributors to the thermal performance. The ranges of geometrical variables were identified and fed into multi-objective optimization cycles implementing the multi-objective genetic algorithm. The optimization objectives were to minimize pumping requirements while enhancing the local and global heat transfer effectiveness over the surface of the heater in single phase flow environment. A broad range of geometries were obtained with an acceptable tradeoff between thermal and hydraulic performance for low Reynolds number. Additionally, tandem geometries were investigated and showed that higher heat transfer effectiveness could be obtained with acceptable pumping power requirements. The importance of such optimization studies before the experimental testing is highlighted, and novel geometries are presented for further experimental investigations. Thermal performance improvement of 28% was obtained via implementing proposed geometries with only a 12% pressure drop increase. Local heat transfer optimization, aiming to decrease the local temperatures were also performed using doublet pin fin configurations. Results showed that tandem hydrofoils could control the flow with minimum pressure drops while reaching the desired low local temperatures.
Show less - Date Issued
- 2019
- Identifier
- CFE0007821, ucf:52828
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0007821
- Title
- Stability and Control in Complex Networks of Dynamical Systems.
- Creator
-
Manaffam, Saeed, Vosoughi, Azadeh, Behal, Aman, Atia, George, Rahnavard, Nazanin, Javidi, Tara, Das, Tuhin, University of Central Florida
- Abstract / Description
-
Stability analysis of networked dynamical systems has been of interest in many disciplines such as biology and physics and chemistry with applications such as LASER cooling and plasma stability. These large networks are often modeled to have a completely random (Erd\"os-R\'enyi) or semi-random (Small-World) topologies. The former model is often used due to mathematical tractability while the latter has been shown to be a better model for most real life networks.The recent emergence of cyber...
Show moreStability analysis of networked dynamical systems has been of interest in many disciplines such as biology and physics and chemistry with applications such as LASER cooling and plasma stability. These large networks are often modeled to have a completely random (Erd\"os-R\'enyi) or semi-random (Small-World) topologies. The former model is often used due to mathematical tractability while the latter has been shown to be a better model for most real life networks.The recent emergence of cyber physical systems, and in particular the smart grid, has given rise to a number of engineering questions regarding the control and optimization of such networks. Some of the these questions are: \emph{How can the stability of a random network be characterized in probabilistic terms? Can the effects of network topology and system dynamics be separated? What does it take to control a large random network? Can decentralized (pinning) control be effective? If not, how large does the control network needs to be? How can decentralized or distributed controllers be designed? How the size of control network would scale with the size of networked system?}Motivated by these questions, we began by studying the probability of stability of synchronization in random networks of oscillators. We developed a stability condition separating the effects of topology and node dynamics and evaluated bounds on the probability of stability for both Erd\"os-R\'enyi (ER) and Small-World (SW) network topology models. We then turned our attention to the more realistic scenario where the dynamics of the nodes and couplings are mismatched. Utilizing the concept of $\varepsilon$-synchronization, we have studied the probability of synchronization and showed that the synchronization error, $\varepsilon$, can be arbitrarily reduced using linear controllers.We have also considered the decentralized approach of pinning control to ensure stability in such complex networks. In the pinning method, decentralized controllers are used to control a fraction of the nodes in the network. This is different from traditional decentralized approaches where all the nodes have their own controllers. While the problem of selecting the minimum number of pinning nodes is known to be NP-hard and grows exponentially with the number of nodes in the network we have devised a suboptimal algorithm to select the pinning nodes which converges linearly with network size. We have also analyzed the effectiveness of the pinning approach for the synchronization of oscillators in the networks with fast switching, where the network links disconnect and reconnect quickly relative to the node dynamics.To address the scaling problem in the design of distributed control networks, we have employed a random control network to stabilize a random plant network. Our results show that for an ER plant network, the control network needs to grow linearly with the size of the plant network.
Show less - Date Issued
- 2015
- Identifier
- CFE0005834, ucf:50902
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0005834
- Title
- Three-phase contact line phenomena in droplets on solid and liquid surfaces: electrocapillary, pinning, wetting line velocity effect, and free liquid surface deformation.
- Creator
-
Shabani, Roxana, Cho, Hyoung, Kumar, Ranganathan, Kapat, Jayanta, Chow, Louis, Zhai, Lei, University of Central Florida
- Abstract / Description
-
In this dissertation, physical phenomena relevant to (i) an interface formed between two fluids and a solid phase (wettingline) and (ii) an interface between three fluids (triple contact line) were investigated. In the former case, the wetting line (WL)phenomena, which encompass the wetting line energy (WLE), the wetting line velocity (WLV), and the contact anglehysteresis, were studied using a micropump based on electrowetting on dielectric (EWOD). In the latter case, the air filmlubrication...
Show moreIn this dissertation, physical phenomena relevant to (i) an interface formed between two fluids and a solid phase (wettingline) and (ii) an interface between three fluids (triple contact line) were investigated. In the former case, the wetting line (WL)phenomena, which encompass the wetting line energy (WLE), the wetting line velocity (WLV), and the contact anglehysteresis, were studied using a micropump based on electrowetting on dielectric (EWOD). In the latter case, the air filmlubrication effect and the liquid free surface deformation were taken into account to explain the dual equilibrium states ofwater droplets on liquid free surfaces. A micropump based on droplet/meniscus pressure gradient generated by EWOD was designed and fabricated. By alteringthe contact angle between liquid and solid using an electric field a pressure gradient was induced and a small droplet waspumped into the channel. The flow rate in the channel was found to be constant in spite of the changes in the droplet'sradius. The WL phenomena were studied to unravel the physical concept behind the micropump constant flow rate. Theobservation and measurement reveal that the shrinking input droplet changes its shape in two modes in time sequence: (i)its contact angle decreases, while its wetting area remains constant, and (ii) its WL starts to move while its contact anglechanges. Contact angles were measured for the advancing and receding WLs at different velocities to capture a full pictureof contact angle behavior. The effects of the WLE on the static contact angle and the WLV on the dynamic contact angle inthe pump operation were investigated. Also the effect of EWOD voltage on the magnitude and uniformity of the micropumpflow rate was studied. Dynamic contact angles were used to accurately calculate the pressure gradient between the dropletand the meniscus, and estimate the flow rate. It was shown that neglecting either of these effects not only results in aconsiderable gap between the predicted and the measured flow rates but also in an unphysical instability in the flow rateanalysis. However, when the WLE and WLV effects were fully taken into account, an excellent agreement between thepredicted and the experimental flow rates was obtained.For the study of the TCL between three fluids, aqueous droplets were formed at oil-air interface and two stableconfigurations of (i) non-coalescent droplet and (ii) cap/bead droplet were observed. General solutions for energy and forceanalysis were obtained and were shown to be in good agreement with the experimental observations. Further the energybarrier obtained for transition from configuration (i) to (ii) was correlated to the droplet release height and the probability ofnon-coalescent droplet formation. Droplets formed on the solid surfaces and on the free surface of immiscible liquids have various applications indroplet-based microfluidic devices. This research provides an insight into their formation and manipulation.
Show less - Date Issued
- 2013
- Identifier
- CFE0005253, ucf:50598
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0005253
