You are here
High Temperature Mechanics of Aerospace Ceramic Composites Characterized via Synchrotron Radiation
| Title: | High Temperature Mechanics of Aerospace Ceramic Composites Characterized via Synchrotron Radiation. |
 24 views 13 downloads |
|---|---|---|
| Name(s): |
Manero, Albert, Author Raghavan, Seetha, Committee Chair Kauffman, Jeffrey L., Committee Member Gou, Jihua, Committee Member University of Central Florida, Degree Grantor |
|
| Type of Resource: | text | |
| Date Issued: | 2016 | |
| Publisher: | University of Central Florida | |
| Language(s): | English | |
| Abstract/Description: | This research investigates the mechanics of complex aerospace material systems designed for extreme environments. Ceramics and ceramic matrix composites (CMCs) provide highly sought-after capabilities including the potential to withstand extreme temperatures and heat fluxes, severe oxidation and mechanical stresses. Two important material systems form the basis of the scope for this effort: i) thermal barrier coatings (TBCs) on Ni-superalloys that have enabled dramatic increases in turbine inlet temperatures exceeding 1100(&)deg;C; and ii) ceramic matrix composites that have shown capability and promise for hypersonic applications beyond 1300(&)deg;C. Understanding the mechanical and material properties of these materials as they evolve with temperature and load requires in-situ measurements under realistic representative environments, and from these measurements life expectancy and failure mechanisms can be more completely elucidated.In this work, TBCs representative of typical jet engine turbine blade coatings, comprised of a Yttria-stabilized zirconia top coat and NiCoCrAlY bond coat deposited on an IN 100 superalloy substrate were studied. Particular interest was given to the thermally grown oxide (TGO) that develops between the top layer and the bond coat that has a major influence on TBC durability. The oxide scale's development is linked to the typical failure mechanisms observed in application for aircraft engines, and the influence of internal cooling has been shown to vary the behavior and evolution over its lifetime. Tubular specimens coated via electron beam physical vapor deposition (EB-PVD) were investigated with hard synchrotron X-rays at Argonne National Laboratory's Advanced Photon Source, while subjected to realistic mechanical and thermal loading representative of the engine environment. A multi-variable investigation was conducted to determine the influence and magnitude of internal flow cooling, external applied force loading, and thermal exposure in cyclical application. The superposition of all these variables together creates variation spatially across in service turbine blades. Lattice strains for the axial and radial directions were resolved for the YSZ top coat layer and the internal thermally grown oxide scale. The findings revealed that during sufficiently high axial loading the strain condition for both the thermally grown oxide and top coat layers may be reversed in direction, and demonstrated how the internal flow and applied mechanical loading produce opposing effects while showing the magnitude of each variable. This reversal of the strain direction is known to contribute to the failure mechanics in the system. This discovery shows that with increased internal cooling to critical zones that experience higher mechanical loads, it is possible to tune the response of the system and prevent the reversal from compressive to tensile strains (in the axial direction). The impact of the results has the potential to be used in design for enhanced durability of the multi-layer coatings.Ceramic matrix composites are identified to comprise the next generation of turbine blades and high temperature parts. All oxide ceramic matrix composites were investigated for the influence of micro-structure variations and processing on the mechanics of the system. Isolation techniques of the all alumina composite by means of synchrotron diffraction and tomography presented a novel non-destructive method for evaluating the constituent's properties and evolution. The study successfully revealed how variations in grain size and elastic modulus result in a complex strain states. Further tomographical analysis identified system mechanics influenced by porosity and processing effects. CMCs with an yttria based environmental barrier coating were investigated for comparison to uncoated parts to further capture the in service condition, and revealed considerations for how to improve the durability of the inter-laminar strength of environmental barrier coatings interface. Together the research conducted has contributed to the high temperature aerospace materials' community, and the experimental work taken strides to provide validation and support future numerical simulation for developing better lifetime modeling. Resulting high temperature mechanics' information has the potential to enhance the design of aerospace components for substantial increases in durability. The outcomes from this work can be leveraged to continue advancing material characterization for aerospace material systems under complex and extreme environments. | |
| Identifier: | CFE0006836 (IID), ucf:51794 (fedora) | |
| Note(s): |
2016-12-01 Ph.D. Engineering and Computer Science, Mechanical and Aerospace Engineering Doctoral This record was generated from author submitted information. |
|
| Subject(s): | mechanics -- synchrotron -- XRD -- TBC -- CMC -- tomography -- high temperature -- in-situ | |
| Persistent Link to This Record: | http://purl.flvc.org/ucf/fd/CFE0006836 | |
| Restrictions on Access: | campus 2020-06-15 | |
| Host Institution: | UCF |
