You are here
Spatial and Temporal Compressive Sensing for Vibration-based Monitoring: Fundamental Studies with Beam Vibrations
- Date Issued:
- 2017
- Abstract/Description:
- Vibration data from mechanical systems carry important information that is useful for characterization and diagnosis. Standard approaches rely on continually streaming data at a fixed sampling frequency. For applications involving continuous monitoring, such as Structural Health Monitoring (SHM), such approaches result in high data volume and require powering sensors for prolonged duration. Furthermore, adequate spatial resolution, typically involves instrumenting structures with a large array of sensors. This research shows that applying Compressive Sensing (CS) can significantly reduce both the volume of data and number of sensors in vibration monitoring applications. Random sampling and the inherent sparsity of vibration signals in the frequency domain enables this reduction. Additionally, by exploiting the sparsity of mode shapes, CS can also enable efficient spatial reconstruction using fewer spatially distributed sensors than a traditional approach. CS can thereby reduce the cost and power requirement of sensing as well as streamline data storage and processing in monitoring applications. In well-instrumented structures, CS can enable continuous monitoring in case of sensor or computational failures. The scope of this research was to establish CS as a viable method for SHM with application to beam vibrations. Finite element based simulations demonstrated CS-based frequency recovery from free vibration response of simply supported, fixed-fixed and cantilever beams. Specifically, CS was used to detect shift in natural frequencies of vibration due to structural change using considerably less data than required by traditional sampling. Experimental results using a cantilever beam provided further insight into this approach. In the experimental study, impulse response of the beam was used to recover natural frequencies of vibration with CS. It was shown that CS could discern changes in natural frequencies under modified beam parameters. When the basis functions were modified to accommodate the effect of damping, the performance of CS-based recovery further improved. Effect of noise in CS-based frequency recovery was also studied. In addition to incorporating damping, formulating noise-handling as a part of the CS algorithm for beam vibrations facilitated detecting shift in frequencies from even fewer samples. In the spatial domain, CS was primarily developed to focus on image processing applications, where the signals and basis functions are very different from those required for mechanical beam vibrations. Therefore, it mandated reformulation of the CS problem that would handle related challenges and enable the reconstruction of spatial beam response using very few sensor data. Specifically, this research addresses CS-based reconstruction of deflection shape of beams with fixed boundary conditions. Presence of a fixed end makes hyperbolic terms indispensable in the basis, which in turn causes numerical inconsistencies. Two approaches are discussed to mitigate this problem. The first approach is to restrict the hyperbolic terms in the basis to lower frequencies to ensure well conditioning. The second, a more systematic approach, is to generate an augmented basis function that will combine harmonic and hyperbolic terms. At higher frequencies, the combined hyperbolic terms will limit each other's magnitude, thus ensuring boundedness. This research thus lays the foundation for formulating the CS problem for the field of mechanical vibrations. It presents fundamental studies and discusses open-ended challenges while implementing CS to this field that will pave way for further research.
Title: | Spatial and Temporal Compressive Sensing for Vibration-based Monitoring: Fundamental Studies with Beam Vibrations. |
26 views
7 downloads |
---|---|---|
Name(s): |
Ganesan, Vaahini, Author Das, Tuhin, Committee Chair Kauffman, Jeffrey L., Committee Member Raghavan, Seetha, Committee Member University of Central Florida, Degree Grantor |
|
Type of Resource: | text | |
Date Issued: | 2017 | |
Publisher: | University of Central Florida | |
Language(s): | English | |
Abstract/Description: | Vibration data from mechanical systems carry important information that is useful for characterization and diagnosis. Standard approaches rely on continually streaming data at a fixed sampling frequency. For applications involving continuous monitoring, such as Structural Health Monitoring (SHM), such approaches result in high data volume and require powering sensors for prolonged duration. Furthermore, adequate spatial resolution, typically involves instrumenting structures with a large array of sensors. This research shows that applying Compressive Sensing (CS) can significantly reduce both the volume of data and number of sensors in vibration monitoring applications. Random sampling and the inherent sparsity of vibration signals in the frequency domain enables this reduction. Additionally, by exploiting the sparsity of mode shapes, CS can also enable efficient spatial reconstruction using fewer spatially distributed sensors than a traditional approach. CS can thereby reduce the cost and power requirement of sensing as well as streamline data storage and processing in monitoring applications. In well-instrumented structures, CS can enable continuous monitoring in case of sensor or computational failures. The scope of this research was to establish CS as a viable method for SHM with application to beam vibrations. Finite element based simulations demonstrated CS-based frequency recovery from free vibration response of simply supported, fixed-fixed and cantilever beams. Specifically, CS was used to detect shift in natural frequencies of vibration due to structural change using considerably less data than required by traditional sampling. Experimental results using a cantilever beam provided further insight into this approach. In the experimental study, impulse response of the beam was used to recover natural frequencies of vibration with CS. It was shown that CS could discern changes in natural frequencies under modified beam parameters. When the basis functions were modified to accommodate the effect of damping, the performance of CS-based recovery further improved. Effect of noise in CS-based frequency recovery was also studied. In addition to incorporating damping, formulating noise-handling as a part of the CS algorithm for beam vibrations facilitated detecting shift in frequencies from even fewer samples. In the spatial domain, CS was primarily developed to focus on image processing applications, where the signals and basis functions are very different from those required for mechanical beam vibrations. Therefore, it mandated reformulation of the CS problem that would handle related challenges and enable the reconstruction of spatial beam response using very few sensor data. Specifically, this research addresses CS-based reconstruction of deflection shape of beams with fixed boundary conditions. Presence of a fixed end makes hyperbolic terms indispensable in the basis, which in turn causes numerical inconsistencies. Two approaches are discussed to mitigate this problem. The first approach is to restrict the hyperbolic terms in the basis to lower frequencies to ensure well conditioning. The second, a more systematic approach, is to generate an augmented basis function that will combine harmonic and hyperbolic terms. At higher frequencies, the combined hyperbolic terms will limit each other's magnitude, thus ensuring boundedness. This research thus lays the foundation for formulating the CS problem for the field of mechanical vibrations. It presents fundamental studies and discusses open-ended challenges while implementing CS to this field that will pave way for further research. | |
Identifier: | CFE0007120 (IID), ucf:51954 (fedora) | |
Note(s): |
2017-08-01 Ph.D. Engineering and Computer Science, Mechanical and Aerospace Engineering Doctoral This record was generated from author submitted information. |
|
Subject(s): | Structural health monitoring -- vibration based monitoring -- beam vibrations -- compressive sensing -- compressed sensing -- compressive sampling -- spatial and temporal vibrations -- vibration based diagnostics -- damage detection -- damage localization | |
Persistent Link to This Record: | http://purl.flvc.org/ucf/fd/CFE0007120 | |
Restrictions on Access: | public 2018-02-15 | |
Host Institution: | UCF |