You are here

EFFECT OF HORIZONTAL PILES ON THE SOIL BEARING CAPACITY FOR CIRCULAR FOOTING ABOVE CAVITY

Download pdf | Full Screen View

Date Issued:
2007
Abstract/Description:
The design of foundation in normal soil conditions is governed by bearing capacity, minimum depth of foundation and settlement. However, foundation design in karst regions needs to consider an additional criterion associated to the possibility of subsurface subsidence and ravelling sinkholes. Under this environment, alternative techniques are needed to improve the subsurface soil. In this study general background information is given to understand the geological characteristics of Central Florida and why this area is considered to be a karst region and susceptible to sinkholes formation. Traditional foundation design techniques on karst regions are addressed in this paper. Finally, the use of a network of three subsurface horizontal piles is proposed and the effect on stress increase and soil bearing capacity for footing due to the horizontal piles is investigated. Finite element computer software is used to analyze the stress distribution under different conditions and the results are discussed. The objective of this study is to determine whether or not horizontal piles under a circular footing at the sinkhole site is a viable solution to reduce the stress increase in the soil induced by the footing load. The horizontal piles located at a certain depth below the center of the footing intercepts the cone of pressure due to the footing load. Also, it is the purpose of this research to determine the effect on the soil bearing capacity for footing due to the proposed horizontal piles at the sinkhole prone area. In 1983 Baus, R.L and Wang, M.C published a research paper on soil bearing capacity for strip footing above voids. In their research, a chart for soil bearing capacity for strip footing located above a void was presented. However, in this paper we present a chart for circular footing size as a function void location and a design chart for circular footing size with a network of three underground piles. The result indicates that with the horizontal piles placed above the cavity, the stress increase caused by the footing load substantially decreases as compared to the situation of no horizontal piles, thus increases the soil bearing capacity for the normal design of footing size. The approach of using the horizontal piles placed in between the footing and the subsurface cavity is a new concept that has not been experienced previously. The results are strictly based on the analytical model of finite element program. Before full implementation for the construction practice, further research and experimental work should be conducted.
Title: EFFECT OF HORIZONTAL PILES ON THE SOIL BEARING CAPACITY FOR CIRCULAR FOOTING ABOVE CAVITY.
25 views
9 downloads
Name(s): Arosemena, Rafael, Author
Kuo, Shiou-San, Committee Chair
University of Central Florida, Degree Grantor
Type of Resource: text
Date Issued: 2007
Publisher: University of Central Florida
Language(s): English
Abstract/Description: The design of foundation in normal soil conditions is governed by bearing capacity, minimum depth of foundation and settlement. However, foundation design in karst regions needs to consider an additional criterion associated to the possibility of subsurface subsidence and ravelling sinkholes. Under this environment, alternative techniques are needed to improve the subsurface soil. In this study general background information is given to understand the geological characteristics of Central Florida and why this area is considered to be a karst region and susceptible to sinkholes formation. Traditional foundation design techniques on karst regions are addressed in this paper. Finally, the use of a network of three subsurface horizontal piles is proposed and the effect on stress increase and soil bearing capacity for footing due to the horizontal piles is investigated. Finite element computer software is used to analyze the stress distribution under different conditions and the results are discussed. The objective of this study is to determine whether or not horizontal piles under a circular footing at the sinkhole site is a viable solution to reduce the stress increase in the soil induced by the footing load. The horizontal piles located at a certain depth below the center of the footing intercepts the cone of pressure due to the footing load. Also, it is the purpose of this research to determine the effect on the soil bearing capacity for footing due to the proposed horizontal piles at the sinkhole prone area. In 1983 Baus, R.L and Wang, M.C published a research paper on soil bearing capacity for strip footing above voids. In their research, a chart for soil bearing capacity for strip footing located above a void was presented. However, in this paper we present a chart for circular footing size as a function void location and a design chart for circular footing size with a network of three underground piles. The result indicates that with the horizontal piles placed above the cavity, the stress increase caused by the footing load substantially decreases as compared to the situation of no horizontal piles, thus increases the soil bearing capacity for the normal design of footing size. The approach of using the horizontal piles placed in between the footing and the subsurface cavity is a new concept that has not been experienced previously. The results are strictly based on the analytical model of finite element program. Before full implementation for the construction practice, further research and experimental work should be conducted.
Identifier: CFE0001643 (IID), ucf:47224 (fedora)
Note(s): 2007-05-01
M.S.C.E.
Engineering and Computer Science, Department of Civil and Environmental Engineering
Masters
This record was generated from author submitted information.
Subject(s): Soil bearing capacity
stress increase
circular footing
Persistent Link to This Record: http://purl.flvc.org/ucf/fd/CFE0001643
Restrictions on Access: private 2007-04-01
Host Institution: UCF

In Collections