View All Items

Title: Shifted Plastic Hinge Column Connections Using Grouted Sleeves for Accelerated Bridge Construction.
Creator: Al-Jelawy, Haider, Mackie, Kevin, Gou, Jihua, Chopra, Manoj, University of Central Florida
Abstract / Description: Accelerated bridge construction (ABC) is being increasingly used in new bridge construction and repair. ABC typically requires prefabricated elements joined with mechanical couplers. Grouted sleeves (GSs) offer good construction tolerances and load transfer between precast elements. However, previous research identified some performance issues with precast columns employing GS connections for seismic regions. Therefore, there is a need to develop improved connection details. This research...
Show moreAccelerated bridge construction (ABC) is being increasingly used in new bridge construction and repair. ABC typically requires prefabricated elements joined with mechanical couplers. Grouted sleeves (GSs) offer good construction tolerances and load transfer between precast elements. However, previous research identified some performance issues with precast columns employing GS connections for seismic regions. Therefore, there is a need to develop improved connection details. This research consists of three components; testing of six large-scale precast reinforced concrete column models, a series of individual component tests on GS bar splices, and analytical studies. Large-scale, precast column models were designed and experimentally tested using a shifted plastic hinge (SPH) concept to minimize the damage in the capacity-protected elements and retain the column ductility. The column testing matrix considered aspect ratio, moment gradient, and splicing details. Column models were tested in an upright cantilever configuration under quasi-static cyclic load. Results showed that SPH can be used for both flexural and flexural-shear columns. Two types of component tests were performed: tensile tests to quantify the tensile behavior of the splices, and strain penetration tests to quantify the slip at the sleeve ends. The tests were used to obtain constitutive models for the bond-slip behavior of the GS splices.Results showed that GS splices developed the full ultimate stress of the spliced bars and that the slip at sleeve ends can considerably influence the global behavior of the precast columns. The analytical models were developed in OpenSees using fiber-based beams models and they incorporated the calibrated bond-slip models of GS splices. The large-scale column tests were simulated and compared with respective experimental results. Analytical results showed that the developed models were able to mimic the column behavior and can be used for analysis of GS precast columns.
Show less
Date Issued: 2017
Identifier: CFE0006851, ucf:51739
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0006851

Title: Characterization of mechanical properties in nanoparticle reinforced hybrid carbon fiber composites using photoluminescence piezospectroscopy.
Creator: Jahan, Sanjida, Raghavan, Seetha, Gou, Jihua, Bai, Yuanli, University of Central Florida
Abstract / Description: Carbon fiber composites have become popular in aerospace structures and applications due to their light weight, high strength, and high performance. Hybrid carbon fiber reinforced polymer (HCFRP) composites with alumina nanoparticles reinforcement display improved material properties such as fracture toughness, resistance to crack propagation and improved fatigue life. However, homogeneous dispersion of nanoscale materials in the matrix is important for even distribution of the improved...
Show moreCarbon fiber composites have become popular in aerospace structures and applications due to their light weight, high strength, and high performance. Hybrid carbon fiber reinforced polymer (HCFRP) composites with alumina nanoparticles reinforcement display improved material properties such as fracture toughness, resistance to crack propagation and improved fatigue life. However, homogeneous dispersion of nanoscale materials in the matrix is important for even distribution of the improved properties. Implementing silane coupling agents (SCAs) improves dispersion by acting as a bridge between organic and inorganic materials, which increases interfacial strength and decreases sedimentation by bonding the particulate filler to the fiber reinforcement. This research is aimed at quantifying the improvement in dispersion of nanoparticles and elucidating the effects on the mechanical property of HCFRP samples through the novel use of photoluminescent characteristic peaks emitted by the alumina reinforcement particles. Photo-luminescene emission from secondary reinforcement particles of alumina embedded within the hybrid carbon fiber composites is leveraged to reveal microstructural effects of functionalization and particle weight fraction as it relates to overall composite mechanics.6, 9 and 12 weight percentage of alumina particle loading with Reactive Silane Coupling Agents, Non-reactive Silane Coupling Agent surface treatments and untreated condition are investigated in this research. Uniaxial tensile tests were conducted with measurements using piezospectroscopy (PS) and concurrent digital image correlation (DIC) to quantify the mechanical property and load distribution between the carbon fiber/epoxy and the reinforcing nanoparticles. The piezospectroscopic data were collected in an in-situ configuration using a portable piezospectroscopy system while the sample was under tensile load. Photoluminescence results show the dispersion and sedimentation behavior of the nanoparticles in the material for different surface treatment and weight percentage of the alumina nanoparticles. The piezospectroscopic maps capture and track the residual stress and its change under applied load. The results reveal the effect of varying particle loading on composite mechanical properties and how this changes with different functionalization conditions. The role of the particles in load transfer in the hybrid composite is further investigated and compared with theory. This work extends the capability of spectroscopy as an effective non-invasive method to study, at the microstructural level, the material and manufacturing effects on the development of advanced composites for applications in aerospace structures and beyond.
Show less
Date Issued: 2017
Identifier: CFE0006886, ucf:51715
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0006886

Title: A Study On The Plasticity And Fracture Behaviors Of Inconel 718 Under Multiaxial Stress And Extremely Low Cycle Fatigue Loadings.
Creator: Algarni, Mohammed, Bai, Yuanli, Gordon, Ali, Gou, Jihua, University of Central Florida
Abstract / Description: Engineering materials and structures are usually subjected to multiaxial stress states loading due to geometrical effects, residual stresses, or multi-directional loading. Ductile fracture and Extremely Low Cycle Fatigue (ELCF), less than 100 cycles to fail, are two common and co-exist failure modes in many engineering structures. However, the linkage between these two failure modes under multi-axial loading conditions has never been systematically studied. This research summarizes an...
Show moreEngineering materials and structures are usually subjected to multiaxial stress states loading due to geometrical effects, residual stresses, or multi-directional loading. Ductile fracture and Extremely Low Cycle Fatigue (ELCF), less than 100 cycles to fail, are two common and co-exist failure modes in many engineering structures. However, the linkage between these two failure modes under multi-axial loading conditions has never been systematically studied. This research summarizes an extensive work of experimental and numerical studies of ductile fracture and ELCF under different stress states for nickel-base superalloy material (")IN718(") under room temperature. Specially designed specimens and tests were used to achieve desired multi-axial loading conditions. Four types of specimens with four different shapes, total of 16 specimens, were tested until complete fracture. Two groups of tests were conducted: (a) round bar specimens with different notches; (b) plane strain specimens. Experimental data of force-displacement curves and strain-life graph were plotted for analysis. The first part of this research focuses on a numerical study of monotonic tensile loading with different stress states. This part of the investigation deeply studies the dependency of the hydrostatic stress (related to stress triaxiality) and the normalized third invariant of the deviatoric stress (related to Lode angle parameter) in plastic behavior and ductile fracture. Constitutive plasticity model proposed by Bai (&) Wierzbicki and the modified Mohr-Coulomb (MMC) ductile fracture model were adapted with several extensions. The plasticity model and ductile fracture criterion were implemented into ABAQUS through a user-defined material subroutine (VUMAT). Extensive experimental results are used to calibrate the models. After setting up the parameter optimization during model calibration, the experimental results and numerical simulations were well correlated in both plasticity deformation and fracture initiation. A 3D fracture locus of Inconel 718 was constructed by knowing the strain at fracture, stress triaxiality, and normalized Lode angle of the tested samples. By introducing a suitable element post-failure behavior, not only the fracture initiation but also the fracture propagation modes are successfully predicted in finite element simulations for monotonic loading.The second part extensively investigates ELCF on IN718. The IN718 cyclic plasticity behavior and the Bauschinger effect are studied and simulated using the well-known nonlinear kinematic hardening law by J. L. Chaboche and his co-workers under different strain amplitudes and different stress states. Moreover, the Voc(&)#233; isotropic hardening law was applied in combination with the Bai-Wierzbicki plasticity model. The Bai-Wierzbicki plasticity model was used to capture the effect of different stress states on ELCF based on the stress triaxiality and Lode angle parameters. On the other hand, the modified Mohr(-)Coulomb (MMC) ductile fracture model for monotonic loading was extended by a new damage evolution rule to cover the ELCF regime. A new parameter was introduced to represent the effect of the cyclic loading at ELCF. The new parameter is responsible for capturing the change of non-proportional loading direction between the current stress and the backstress tensors. The model explores the underlying damage and fracture mechanisms through the equivalent plastic strain evolution under cycling loading. Finally, the mechanism linkage between these two failure modes was studied. A comparison between the experimental data and the finite element simulation results (by Abaqus/Explicit) shows very good correlations. In addition, fractographic examinations, analysis, and finite element simulations are presented.
Show less
Date Issued: 2017
Identifier: CFE0006553, ucf:51338
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0006553

Title: Design and modeling of a heat exchanger for porous combustor powered steam generators in automotive industry.
Creator: Dasgupta, Apratim, Orlovskaya, Nina, Gou, Jihua, Vasu Sumathi, Subith, University of Central Florida
Abstract / Description: A major challenge faced by automobile manufacturers is to achieve reduction of particulate emission to acceptable standards, as the emission standards become more and more stringent. One of the ecologically friendly options to reduce emissions is to develop external combustion in a steam engine as a replacement of the internal combustion engine. There are multiple factors, other than pollution that need to be considered for developing a substitute for Internal Combustion Engine, like specific...
Show moreA major challenge faced by automobile manufacturers is to achieve reduction of particulate emission to acceptable standards, as the emission standards become more and more stringent. One of the ecologically friendly options to reduce emissions is to develop external combustion in a steam engine as a replacement of the internal combustion engine. There are multiple factors, other than pollution that need to be considered for developing a substitute for Internal Combustion Engine, like specific power, throttle response, torque speed curve, fuel consumption and refueling infrastructure. External combustion in a steam engine seems to be a bright idea, for a cleaner and more environment friendly alternative to the IC engine that can satisfy the multiple technology requirements mentioned. One way of performing external heterogeneous combustion is to use porous ceramic media, which is a modern and innovative technique, used in many practical applications. The heterogeneous combustion inside ceramic porous media provides numerous advantages, as the ceramic, acts as a regenerator that distributes heat from the flue gases to the upstream reactants, resulting in the extended flammability limits of the reactants. The heat exchanger design is the major challenge in developing an external combustion engine because of the space, such systems consume in an automobile. The goal of the research is to develop a compact and efficient heat exchanger for the application. The proposed research uses natural gas as a fuel that is mixed with air for combustion and the generated flue gases are fed to a heat exchanger to generate superheated system for performing engine work to the vehicle. The performed research is focused on designing and modeling of the boiler heat exchanger section. The justification for selection of working fluid and power plant technology is presented as part of the research, where the proposed system consists of an Air and Flue Gas Path and a Water and Steam Path. Models are developed for coupled thermal and fluid analysis of a heat exchanger, consisting of three sections. The first section converts water to a saturated liquid. The second portion consists of a section where water is converted to saturated steam. The third section is the superheater, where saturated steam is converted to superheated steam. The Finite Element Model is appropriately meshed and boundary conditions set up to solve the mass, momentum and energy conservation equations. The k-epsilon model is implemented to take care of turbulence. Analytical calculations following the established codes and standards are also executed to develop the design.
Show less
Date Issued: 2017
Identifier: CFE0006579, ucf:51308
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0006579

Title: Combustion Synthesis and Characterization of Porous NiTi Intermetallic For Structural Application.
Creator: Vanterpool, Jessica, Ilegbusi, Olusegun, Gou, Jihua, Nicholson, David, University of Central Florida
Abstract / Description: This thesis describes experimental investigation of thermal and combustion phenomena as well as structure for self- propagating combustion synthesis of porous Ni - Ti intermetallic aimed for structural biomedical application. The control parameters for the porosity distribution have been investigated experimentally through varying the preheat temperature, initial porosity, initial elemental particle size, and applied pressure during the fabrication process. Ni and Ti elemental powders are...
Show moreThis thesis describes experimental investigation of thermal and combustion phenomena as well as structure for self- propagating combustion synthesis of porous Ni - Ti intermetallic aimed for structural biomedical application. The control parameters for the porosity distribution have been investigated experimentally through varying the preheat temperature, initial porosity, initial elemental particle size, and applied pressure during the fabrication process. Ni and Ti elemental powders are mixed using a 1:1 ratio. The mixture is compressed using several different compression forces to produce cylindrical samples of 1.1 cm diameter and 2-3cm length, with initial porosity ranging from 30% to 40%. The samples are preheated to various initial temperatures and ignited from the top surface such that the flame propagates axially downwards. The combustion reaction is recorded with a motion camera. An infrared sensor is used to record the temperature profile during the combustion process. The samples are then cut using a diamond saw in both longitudinal and transverse directions. Image analysis software is then used to analyze the porosity distribution in each sample.
Show less
Date Issued: 2013
Identifier: CFE0004768, ucf:49803
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0004768

Title: MECHANICAL AND THERMAL CHARACTERIZATION OF CONTINUOUS FIBER-REINFORCED PYROLYSIS-DERIVED CARBON-MATRIX COMPOSITES.
Creator: Lui, Donovan, Gou, Jihua, Raghavan, Seetha, Lin, Kuo-Chi, University of Central Florida
Abstract / Description: Maturity of high-temperature polymer-reinforced composites defer to conventionally expensive and intensive methods in both material and manufacturing aspects. Even traditional carbon-carbon, aerogel, and ceramic approaches are highly limited by difficult manufacturing techniques and are subject to sensitive handling throughout their processing and lifetime. Despite their utility in extreme environments, the high costs of existing high-temperature composites find limited practical...
Show moreMaturity of high-temperature polymer-reinforced composites defer to conventionally expensive and intensive methods in both material and manufacturing aspects. Even traditional carbon-carbon, aerogel, and ceramic approaches are highly limited by difficult manufacturing techniques and are subject to sensitive handling throughout their processing and lifetime. Despite their utility in extreme environments, the high costs of existing high-temperature composites find limited practical applicability under high-performance applications. The development of continuous fiber-reinforced pyrolysis-derived carbon-matrix composites aim to circumvent the issues surrounding the manufacturing and handling of conventional high-temperature composites.Polymer matrix composites (PMCs) have a number of attractive properties including light weight, high stiffness-to-weight and strength-to-weight ratios, ease of installation on the field, potential lower system-level cost, high overall durability and less susceptibility to environmental deterioration than conventional materials. However, since PMCs contain the polymer matrix, their applications are limited to lower temperatures. In this study, a pyrolysis approach was used to convert the matrix material of phenolic resin into carbon-matrix to improve the mechanical and thermal properties of the composites. Composite material consisting of basalt fiber and phenolic resin was pyrolyzed to produce basalt-carbon composites through a novel method in which the pyrolysis promoted in-situ carbon nanotube growth to form (")fuzzy fibers("). The carbon phenolic composites were pyrolyzed to produce carbon-carbon composites. Several types of composites are examined and compared, including conventional phenolic and carbon-matrix composites. Through Raman spectroscopy and scanning electron microscopy, the composition of materials are verified before testing. Investigation into the improvements from in-situ carbon growth was conducted with an open-flame oxyacetylene test (ASTM-E285), to establish high-temperature thermal behavior, in addition to mechanical testing by three-point bending (ASTM-D790), to evaluate the mechanical and thermal properties of the pyrolyzed composites.
Show less
Date Issued: 2014
Identifier: CFE0005654, ucf:50196
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0005654

Title: Nondestructive Analysis of Advanced Aerospace Materials via Spectroscopy and Synchrotron Radiation.
Creator: Manero, Albert, Raghavan, Seetha, Kauffman, Jeffrey, Gou, Jihua, University of Central Florida
Abstract / Description: Advanced aerospace materials require extensive testing and characterization to anticipate and ensure their integrity under hostile environments. Characterization methods utilizing synchrotron X-Ray diffraction and spectroscopy can decrease the time required to determine an emerging material's readiness for application through intrinsic information on the material response and failure mechanisms. In this study, thermal barrier coating samples applicable to turbine blades of jet engines were...
Show moreAdvanced aerospace materials require extensive testing and characterization to anticipate and ensure their integrity under hostile environments. Characterization methods utilizing synchrotron X-Ray diffraction and spectroscopy can decrease the time required to determine an emerging material's readiness for application through intrinsic information on the material response and failure mechanisms. In this study, thermal barrier coating samples applicable to turbine blades of jet engines were studied using Raman and Photoluminescence spectroscopy as well as Synchrotron X-ray diffraction while Kevlar based fiber composites applicable to ballistic resistant armor were studied using Raman spectroscopy to investigate the mechanical state and corresponding damage and failure mechanisms. Piezospectroscopic studies on the stress state of the thermally grown oxide (TGO) within the thermal barrier coatings, on a hollow cylindrical specimen, provided results that indicate variations within the TGO. Comparison of measured photo-luminescence spectra of the specimen before and after long duration thermal aging showcases the development of the system and the initiation of micro-damage. Raman spectroscopy performed on Kevlar ballistic composites with nano-scale additives, presented insight into the additives' role in load transfer and damage propagation through a comparison of the shift in optical spectra to that of the pristine fibers. The results presented herein utilize changes in the measured emission from these non-destructive testing techniques to link the phenomena with material response. Techniques to optimize imaging and spectral collection are addressed as well. The findings will advance the use of the techniques in the development of aerospace materials, providing a more complete understanding of land and aircraft turbine blade coatings, and fiber composite response to complex loading.
Show less
Date Issued: 2014
Identifier: CFE0005657, ucf:50195
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0005657

Title: Nanocomposite Coating Mechanics via Piezospectroscopy.
Creator: Freihofer, Gregory, Raghavan, Seetha, Gou, Jihua, Bai, Yuanli, Schulzgen, Axel, University of Central Florida
Abstract / Description: Coatings utilizing the piezospectroscopic (PS) effect of alpha alumina could enable on the fly stress sensing for structural health monitoring applications. While the PS effect has been historically utilized in several applications, here by distributing the photo-luminescent material in nanoparticle form within a matrix, a stress sensing coating is created. Parallel to developing PS coatings for stress sensing, the multi-scale mechanics associated with the observed PS response of...
Show moreCoatings utilizing the piezospectroscopic (PS) effect of alpha alumina could enable on the fly stress sensing for structural health monitoring applications. While the PS effect has been historically utilized in several applications, here by distributing the photo-luminescent material in nanoparticle form within a matrix, a stress sensing coating is created. Parallel to developing PS coatings for stress sensing, the multi-scale mechanics associated with the observed PS response of nanocomposites and their coatings has been applied to give material property measurements, providing an understanding of particle reinforced composite behavior.Understanding the nanoparticle-coating-substrate mechanics is essential to interpreting the spectral shifts for stress sensing of structures. In the past, methods to experimentally measure the mechanics of these embedded nano inclusions have been limited, and much of the design of these composites depend on computational modeling and bulk response from mechanical testing. The PS properties of Chromium doped alumina allow for embedded inclusion mechanics to be revisited with unique experimental setups that probe the particles state of stress under applied load to the composite. These experimental investigations of particle mechanics will be compared to the Eshelby theory and its derivative theories in addition to the nanocomposite coating mechanics. This work discovers that simple nanoparticle load transfer theories are adequate for predicting PS properties in an intermediate volume fraction range. With fundamentals of PS nanocomposites established, the approach was applied to selected experiments to prove its validity. In general it was observed that the elastic modulus values calculated from the PS response were similar to that observed from macroscale strain measurements such as a strain gage. When simple damage models were applied to monitor the elastic modulus, it was observed that the rate of decay for the elastic modulus was much higher for the PS measurements than for the strain gage.A novel experiment including high resolution PS maps with secondary strain maps from digital image correlation is reviewed on an open hole tension, composite coupon. The two complementary measurements allow for a unique PS response for every location around the hole with a spatial resolution of 400 microns. Progression of intermediate damage mechanisms was observed before digital image correlation indicated them. Using the PS nanocomposite model, elastic modulus values were calculated. Introducing an elastic degradation model with some plastic deformation allows for estimation of material properties during the progression of failure.This work is part of a continuing effort to understand the mechanics of a stress sensing PS coating. The mechanics were then applied to various experimental data that provided elastic property calculations with high resolution. The significance is in the experimental capture of stress transfer in particulate composites. These findings pave the way for the development of high resolution stress-sensing coatings.
Show less
Date Issued: 2014
Identifier: CFE0005614, ucf:50223
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0005614

Title: Processing and Characterization of Continuous Basalt Fiber Reinforced Ceramic Matrix Composites Using Polymer Derived Ceramics.
Creator: Cox, Sarah, Gou, Jihua, Kapat, Jayanta, Sohn, Yongho, University of Central Florida
Abstract / Description: The need for high performance vehicles in the aerospace industry requires materials which can withstand high loads and high temperatures. New developments in launch pads and infrastructure must also be made to handle this intense environment with lightweight, reusable, structural materials. By using more functional materials, better performance can be seen in the launch environment, and launch vehicle designs which have not been previously used can be considered. The development of high...
Show moreThe need for high performance vehicles in the aerospace industry requires materials which can withstand high loads and high temperatures. New developments in launch pads and infrastructure must also be made to handle this intense environment with lightweight, reusable, structural materials. By using more functional materials, better performance can be seen in the launch environment, and launch vehicle designs which have not been previously used can be considered. The development of high temperature structural composite materials has been very limited due to the high cost of the materials and the processing needed. Polymer matrix composites can be used for temperatures up to 260(&)deg;C. Ceramics can take much higher temperatures, but they are difficult to produce and form in bulk volumes. Polymer Derived Ceramics (PDCs) begin as a polymer matrix, allowing a shape to be formed and cured and then to be pyrolized in order to obtain a ceramic with the associated thermal and mechanical properties. The use of basalt in structural and high temperature applications has been under development for over 50 years, yet there has been little published research on the incorporation of basalt fibers as a reinforcement in the composites. In this study, continuous basalt fiber reinforced PDCs have been fabricated and tested for the applicability of this composite system as a high temperature structural composite material. The oxyacetylene torch testing and three point bend testing have been performed on test panels and the test results are presented.
Show less
Date Issued: 2014
Identifier: CFE0005320, ucf:50530
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0005320

Title: Development and Characterization of Nanoparticlee Enhancements in Pyrolysis-Derived High Temperature Composites.
Creator: McKee, James, Gou, Jihua, Kapat, Jayanta, Xu, Chengying, University of Central Florida
Abstract / Description: Thermal protection systems, which are commonly used to protect spacecraft during atmospheric entry, have traditionally been made of materials which are traditionally high in manufacturing costs for both the materials needed and the manufacturing complexity, such as carbon-carbon composites and aerogels. In addition to their manufacturing costs, these materials are also limited in their strength, such as PICA, in a way that necessitate the use of tiles as opposed to single structures because...
Show moreThermal protection systems, which are commonly used to protect spacecraft during atmospheric entry, have traditionally been made of materials which are traditionally high in manufacturing costs for both the materials needed and the manufacturing complexity, such as carbon-carbon composites and aerogels. In addition to their manufacturing costs, these materials are also limited in their strength, such as PICA, in a way that necessitate the use of tiles as opposed to single structures because they are not capable of supporting larger structures. The limitations of polymer reinforced composites have limited their entry into these applications, except for pyrolyzed composite materials, such as carbon-carbon and ceramic composites. These materials have been successfully demonstrated their utility in extreme environments, such as spacecraft heat shields, but their high costs and the difficulty to manufacture them have limited their use to similarly high performance applications where the costs are justifiable. Previous work by others with (")fuzzy fiber(") composites have shown that aligned carbon nanotubes (CNTs) grown on fibers can improve their thermal conductivity and wettability. To this end vertically aligned CNTs were studied for their potential use, but found to be difficult to process with current conventional techniques. A composite material comprised of basalt, a relatively new reinforcing fiber, and phenolic, which has been used in high-temperature applications with great success was made to attempt to create a new material for these applications. To further improve upon the favorable properties of the resulting composite, the composite was pyrolyzed to produce a basalt-carbon composite with a higher thermal stability than its pristine state. While testing the effects of pyrolysis on the thermal stability, a novel technique was also developed to promote in-situ carbon nanotube growth of the resulting basalt-carbon composite without using a monolithic piece of cured phenolic resin in place of the standard aromatic hydrocarbon-catalyst precursor. The in-situ growth of carbon nanotubes (CNTs) was explored as their thermal stability and effectiveness in improving performance has been previously demonstrated when used as a resin additive. The specimens were examined with SEM, EDS, and TGA to determine the effects of both pyrolysis and CNT growth during pyrolysis of the basalt phenolic composites. These tests would confirm the presence of CNTs/CNFs directly grown in the composite by pyrolysis, and confirm their composition by EDS and Raman spectroscopy. EDS would additionally confirm that the surface of the basalt fibers possess a composition suitable for CNT growth, similar to the parameters of CVD processing. Additional testing would also show that the growth behavior of the CNTs/CNFs is dependent on temperature as opposed to composition, indicating that there is a threshold temperature necessary to facilitate the availability of catalysts from within the basalt fibers. The thermal stability shown by TGA indicates that the process of pyrolysis leaves the newly formed composite with a high degree of thermal stability, making the new materials potentially usable in applications such as turbines, in addition to large-scale thermal protection systems.
Show less
Date Issued: 2013
Identifier: CFE0005380, ucf:50458
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0005380

Title: Synthesis, Processing and Characterization of Polymer Derived Ceramic Nanocomposite Coating Reinforced with Carbon Nanotube Preforms.
Creator: Yang, Hongjiang, Gou, Jihua, Xu, Yunjun, Lin, Kuo-Chi, University of Central Florida
Abstract / Description: Ceramics have a number of applications as coating material due to their high hardness, wear and corrosion resistance, and the ability to withstand high temperatures. Critical to the success of these materials is the effective heat transfer through a material to allow for heat diffusion or effective cooling, which is often limited by the low thermal conductivity of many ceramic materials. To meet the challenge of improving the thermal conductivity of ceramics without lowering their performance...
Show moreCeramics have a number of applications as coating material due to their high hardness, wear and corrosion resistance, and the ability to withstand high temperatures. Critical to the success of these materials is the effective heat transfer through a material to allow for heat diffusion or effective cooling, which is often limited by the low thermal conductivity of many ceramic materials. To meet the challenge of improving the thermal conductivity of ceramics without lowering their performance envelope, carbon nanotubes were selected to improve the mechanical properties and thermal dispersion ability due to its excellent mechanical properties and high thermal conductivity in axial direction. However, the enhancements are far lower than expectation resulting from limited carbon nanotube content in ceramic matrix composites and the lack of alignment. These problems can be overcome if ceramic coatings are reinforced by carbon nanotubes with good dispersion and alignment. In this study, the well-dispersed and aligned carbon nanotubes preforms were achieved in the form of vertically aligned carbon nanotubes (VACNTs) and Buckypaper. Polymer derived ceramic (PDC) was selected as the matrix to fabricate carbon nanotube reinforced ceramic nanocomposites through resin curing and pyrolysis. The SEM images indicates the alignment of carbon nanotubes in the PDC nanocomposites. The mechanical and thermal properties of the PDC nanocomposites were characterized through Vickers hardness measurement and Thermogravimetric Analysis. The ideal anisotropic properties of nanocomposites were confirmed by estimating the electrical conductivity in two orthogonal directions.
Show less
Date Issued: 2014
Identifier: CFE0005446, ucf:50385
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0005446

Title: The Characterization of the Effects of Stress Concentrations on the Mechanical Behavior of a Micronic Woven Wire Mesh.
Creator: Kraft, Steven, Gordon, Ali, Bai, Yuanli, Gou, Jihua, University of Central Florida
Abstract / Description: Woven structures are steadily emerging as excellent reinforcing components in dual-phase composite materials subjected to multiaxial loads, thermal shock, and aggressive reactants in the environment. Metallic woven wire mesh materials display good ductility and relatively high specific strength and specific resilience. While use of this class of materials is rapidly expanding, significant gaps in mechanical behavior classification remain. This thesis works to address the mechanics of material...
Show moreWoven structures are steadily emerging as excellent reinforcing components in dual-phase composite materials subjected to multiaxial loads, thermal shock, and aggressive reactants in the environment. Metallic woven wire mesh materials display good ductility and relatively high specific strength and specific resilience. While use of this class of materials is rapidly expanding, significant gaps in mechanical behavior classification remain. This thesis works to address the mechanics of material knowledge gap that exists for characterizing the behavior of a metallic woven structure, composed of stainless steel wires on the order of 25 microns in diameter, and subjected to various loading conditions and stress risers. Uniaxial and biaxial tensile experiments, employing Digital Image Correlation (DIC) as a strain measurement tool, are conducted on woven wire mesh specimens incised in various material orientations, and with various notch geometries. Experimental results, supported by an ample analytic modeling effort, indicate that an orthotropic elastic constitutive model is reasonably capable of governing the macro-scale elasticity of the subject material. Also, the Stress Concentration Factor (SCF) associated with various notch geometries is documented experimentally and analytically, and it is shown that the degree of stress concentration is dependent on both notch and material orientation. The Finite Element Method (FEM) is employed on the macro-scale to expand the experimental test matrix, and to judge the effects of a homogenization assumption when modeling metallic woven structures. Additionally, plasticity of the stainless steel woven wire mesh is considered through experimental determination of the yield surface, and a thorough analytic modeling effort resulting in a modified form of the Hill yield criterion. Finally, meso-scale plasticity of the woven structure is considered, and the form of a multi-scale failure criterion is proposed and exercised numerically.
Show less
Date Issued: 2013
Identifier: CFE0004707, ucf:49825
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0004707

Title: Nano-Particles in Multi-Scale Composites and Ballistic Applications.
Creator: Gibson, Jason, Gou, Jihua, Raghavan, Seetha, Bai, Yuanli, Zhai, Lei, University of Central Florida
Abstract / Description: Carbon nanotubes, graphene and nano sized core shell rubber particles have all been extensively researched for their capability to improve mechanical properties of thermoset resins. However, there has been a lack of research on their evaluation for energy absorption in high velocity impact scenarios, and the fundamental mechanics of their failure mechanisms during highly dynamic stress transfer through the matrix. This fundamental research is essential for laying the foundation for...
Show moreCarbon nanotubes, graphene and nano sized core shell rubber particles have all been extensively researched for their capability to improve mechanical properties of thermoset resins. However, there has been a lack of research on their evaluation for energy absorption in high velocity impact scenarios, and the fundamental mechanics of their failure mechanisms during highly dynamic stress transfer through the matrix. This fundamental research is essential for laying the foundation for improvement in ballistic performance in composite armor. In hard armor applications, energy absorption is largely accomplished through delamination between plies of the composite laminate. This energy absorption is accomplished through two mechanisms. The first being the elongation of the fiber reinforcement contained in the resin matrix, and the second is the propagation of the crack in between the discreet fabric plies. This research aims to fundamentally study the energy absorption characteristics of various nano-particles as reinforcements in thermoset resin for high velocity impact applications. Multiple morphologies will be evaluated through use of platelet, tubular and spherical shaped nano-particles. Evaluations of the effect on stress transfer through the matrix due to the combination of nano sized and micro scale particles of milled fiber is conducted. Three different nano-particles are utilized, specifically, multi-walled carbon nanotubes, graphene, and core shell rubber particles. The difference in surface area, aspect ratio and molecular structure between the tube, platelet and spherical nano-particles causes energy absorption through different failure mechanisms. This changes the impact performance of composite panels enhanced with the nano-particle fillers. Composite panels made through the use of dispersing the various nano-particles in a non-contact planetary mixer, are evaluated through various dynamic and static testing, including unnotched cantilever beam impact, mixed mode fracture toughness, split-Hopkinson bar, and ballistic V50 testing.The unnotched cantilever beam testing showed that the addition of milled fiber degraded the impact resistance of the samples. Addition of graphene nano platelets unilaterally degraded impact resistance through the unnotched cantilever beam testing. 1.5% loading of MWCNT showed the greatest increase in impact resistance, with a 43% increase over baseline.Determining the critical load for mixed mode interlaminar shear testing can be difficult for composite panels that bend without breaking. An iterative technique of optimizing the coefficient of determination, R2, in linear regression is developed for objectively determining the point of non-linearity for critical load. This allows for a mathematical method of determination; thereby eliminating any subjective decision of choosing where the data becomes non-linear. The core shell rubber nano particles showed the greatest strain energy release rate with an exponential improvement over the baseline results.Synergistic effects between nano and micro sized particles in the resin matrix during transfer of the stress wave were created and evaluated. Loadings of 1% milled carbon fiber enhanced the V50 ballistic performance of both carbon nanotube and core shell rubber particles in the resin matrix. However, the addition of milled carbon fiber degrades the impact resistance of all nano-particle enhanced resin matrices. Therefore, benefits gained from the addition of micro-sized particles in combination with nano-sized particles, are only seen in high energy impact scenarios with micro second durations.Loadings of 1% core shell rubber particles and 1% milled carbon fiber have an improvement of 8% in V50 ballistic performance over the baseline epoxy sample for 44 mag single wad cutter gas check projectiles. Loadings of 1% multi-walled carbon nanotubes with 1% milled carbon fiber have an improvement of 7.3% in V50 ballistic performance over the baseline epoxy sample.The failure mechanism of the various nano-particle enhanced resin matrices during the ballistic event is discussed through the use of scanning electron microscope images and Raman spectroscopy of the panels after failure. The Raman spectroscopy data shows a Raman shift for the fibers that had an enhancement in the V50 performance through the use of nano-particles. The Raman band for Kevlar(&)#174; centered at 1,649 cm-1 stemming from the stretching of the C==O bond of the fiber shows to be more sensitive to the residual axial strain, while the Raman band centered at 1,611 cm-1 stemming from the C-C phenyl ring is minimally affected for the CSR enhanced panels due to the failure mechanism of the CSR particles during crack propagation.
Show less
Date Issued: 2013
Identifier: CFE0004849, ucf:49714
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0004849

Title: Load Transfer in an Isolated Particle Embedded within an Epoxy Matrix.
Creator: Durnberg, Erik, Raghavan, Seetha, Gou, Jihua, Bai, Yuanli, University of Central Florida
Abstract / Description: Particulate composites are widely used in many aerospace applications such as protective coatings, adhesives, or structural members of a body and their mechanical properties and behavior have gained increasing significance. The addition of modifiers such as alumina generally leads to improved mechanical properties. This addition also enables the non-invasive study of the load transfer between the particle and the matrix. Understanding the load transfer between the particulate and the matrix...
Show moreParticulate composites are widely used in many aerospace applications such as protective coatings, adhesives, or structural members of a body and their mechanical properties and behavior have gained increasing significance. The addition of modifiers such as alumina generally leads to improved mechanical properties. This addition also enables the non-invasive study of the load transfer between the particle and the matrix. Understanding the load transfer between the particulate and the matrix material is the first step to understanding the behavior and mechanical properties of the composite as a whole. In this work, samples with an isolated alumina particle embedded in an epoxy matrix were created to replicate the ideal assumptions for many particulate mechanics models. In separate experiments, both photo stimulated luminescent spectroscopy (PSLS) and synchrotron radiation were used to collect the spectral emission and diffraction rings, respectively, from the mechanically loaded samples. The PSLS data and XRD data are shown to be in qualitative agreement that as particle size is increased, the load transferred to the particle also increased for the range of particle sizes tested. This trend of increasing load transfer with increasing particle size is compared with the classical Eshelby model. Results from this work provide experimental insight into the load transfer properties of particulate composites and can serve to experimentally validate the theoretical load transfer models that currently exist.
Show less
Date Issued: 2014
Identifier: CFE0005326, ucf:50535
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0005326

Title: PROCESSING AND CHARACTERIZATION OF MULTIFUNCTIONAL THERMOPLASTIC NANOCOMPOSITE FILMS.
Creator: Wang, Xin, Gou, Jihua, Challapalli, Suryanarayana, Xu, Yunjun, University of Central Florida
Abstract / Description: Nanoparticles reinforced polymer composite films have been widely studied for their enhanced mechanical, electrical and thermal properties compared with host polymer matrix. However, most research was conducted on incorporation of nanoparticles in polymer films to improve single property and there is a lack of research on the multifunctional polymer nanocomposite films. In this work, a scalable and continuous spray deposition process was developed for the production of nanoparticles...
Show moreNanoparticles reinforced polymer composite films have been widely studied for their enhanced mechanical, electrical and thermal properties compared with host polymer matrix. However, most research was conducted on incorporation of nanoparticles in polymer films to improve single property and there is a lack of research on the multifunctional polymer nanocomposite films. In this work, a scalable and continuous spray deposition process was developed for the production of nanoparticles reinforced multifunctional thermoplastic nanocomposite films. This process is capable of making a thin sheet of thermoplastic nanocomposites with high nanoparticle loadings. The smallest thickness can be 40um.The objective of this study is to design and optimize the thermoplastic nanocomposite films by utilizing nanoclay and helical carbon nanotube for multifunctional application: a) high electrical conductivity and thermal stability. Helical carbon nanotube paper based thermoplastic polyurethane nanocomposite films have been studied. The electrical conductivity and thermal stability of nanocomposite films increase a lot due to the incorporation of helical carbon nanotube paper with high electrical and thermal conductivity. The peculiar helical configuration of carbon nanotubes could greatly improve the interfacial bonding between carbon nanotubes and polymer matrix. b)High wear resistance and thermal stability. A nanoclay reinforced thermoplastic polyurethane nanocomposite coating was applied on the surface of leather. Due to the high hardness and thermal stability of nanoclay, the leather coated with nanocomposite film showed an improvement of wear resistance and thermal stability.
Show less
Date Issued: 2014
Identifier: CFE0005734, ucf:50105
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0005734

Title: Piezospectroscopic Calibration of Alumina-Nanocomposites for the Development of Stress-Sensing Structures.
Creator: Fugon-Dessources, Daniela, Raghavan, Seetha, Gou, Jihua, Orlovskaya, Nina, University of Central Florida
Abstract / Description: Alpha-alumina is known to exhibit photo-luminescent (PL) properties, mainly characteristic R-lines that shift according to applied stress. In addition to showing excellent PL properties, polymers with embedded alumina nanoparticles have been shown to improve the overall composite mechanical properties. While the use of the PL properties to develop stress-sensing materials using an alumina-epoxy material has been success- fully shown in compression, the properties have not been developed for...
Show moreAlpha-alumina is known to exhibit photo-luminescent (PL) properties, mainly characteristic R-lines that shift according to applied stress. In addition to showing excellent PL properties, polymers with embedded alumina nanoparticles have been shown to improve the overall composite mechanical properties. While the use of the PL properties to develop stress-sensing materials using an alumina-epoxy material has been success- fully shown in compression, the properties have not been developed for tension. In this study, the PL response of variable volume fraction alumina-epoxy composites will be determined under tensile conditions. It is expected that increasing the volume fraction of alumina nanoparticles will increase the sensitivity of the particles PL emission shift to applied stress. Three tensile alumina-epoxy specimens of 21.0%, 31.2%, and 34.5% volume fractions were manufactured and tested under tensile static loads. The results of this experiment will determine the piezospectroscopic (PS) coefficient and calibration of bulk alumina nanocomposites in tension. A linear region was identified in the PS response of the nanocomposite to the applied tensile load. The PS coefficient of this linear region increased as the volume fraction of the nanocomposite increased. To demonstrate the application of structural composites with stress sensing capabilities, alumina nanoparticles were integrated in the manufacturing of a carbon fiber composite specimen. The results of the stress-sensing composite mechanical experiment showed that alumina nanoparticles were able to detect changes in stress. The results for both the bulk nanocomposite calibrations and the application of stress-sensing alumina nanoparticles in a carbon-fiber composite will advance the development of this novel stress-sensing method.
Show less
Date Issued: 2014
Identifier: CFE0005168, ucf:50661
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0005168

Title: Mechanical Properties of Brittle Ceramics: Case Study of Boron Rich Ceramics and Acropora cervicornis Coral Skeleton.
Creator: Carrasco-Pena, Alejandro, Kwok, Kawai, Orlovskaya, Nina, Gou, Jihua, Uribe Romo, Fernando, University of Central Florida
Abstract / Description: Ceramics are ubiquitous in man-made and natural structures. Their mechanical properties highly depend on their composition, microstructure and level of defects in the bulk of the material, the latter affecting the integrity of the components; such is the case of boron-rich ceramics where large agglomerates create high stressed regions, or coral skeleton where porosity determines their strength against hydrodynamic forces present in the ocean tides. Therefore, studying the properties of...
Show moreCeramics are ubiquitous in man-made and natural structures. Their mechanical properties highly depend on their composition, microstructure and level of defects in the bulk of the material, the latter affecting the integrity of the components; such is the case of boron-rich ceramics where large agglomerates create high stressed regions, or coral skeleton where porosity determines their strength against hydrodynamic forces present in the ocean tides. Therefore, studying the properties of ceramic materials using invasive and non-invasive methods helps in the understanding of the link between the properties and the performance of the structures. The aim of this research was to test the novel ceramic component ZrB2-30wt%SiB6 and Acropora cervicornis coral skeleton using non-conventional techniques that allow for the study of their mechanical properties and their behavior when exposed to external loads present in their environments of application. The first part of this study focuses on understanding the effects of adding SiB6 to enhance the mechanical properties of ZrB2 ceramics for their ultra-high temperature use. The second part will emphasize in the behavior of Acropora cervicornis coral skeleton when exposed to compressive forces and the effects porosity has on this structure when subjected to such loads. It was found that the SiB6 phase was not stable after sintering of the composite and large agglomerates were present in the surface of the material acting as stress concentrators, thus compromising the biaxial strength of the component that resulted to be 224.9 MPa. It was also found that coral skeletons are highly susceptible to porosity which creates variability on the elastic modulus ranging from 60-1 GPa for simulated porosity of 0-90% respectively and a strength of 3.56 (&)#177; 0.31 GPa obtained through Vickers indentation. Finite element models were developed and validated against experimental results for the ZrB2-30wt%SiB6 and Acropora cervicornis coral skeleton.
Show less
Date Issued: 2019
Identifier: CFE0007440, ucf:52696
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0007440

$A modeling framework of brittle and ductile fractures coexistence in composites$

Title: A modeling framework of brittle and ductile fractures coexistence in composites.
Creator: Qiao, Yangyang, Bai, Yuanli, Gou, Jihua, Kassab, Alain, Gordon, Ali, An, Linan, University of Central Florida
Abstract / Description: In order to reduce the weight of automobiles and aircrafts, lightweight materials, such as aluminum alloy, advanced high strength steel, composite materials, are widely used to replace the traditional materials like mild steel. Composite materials are complicated in material mechanical properties and less investigated compared to metallic materials. Engineering composites can be categorized into polymer matrix composites (PMCs), metal matrix composites (MMCs) and ceramic matrix composites ...
Show moreIn order to reduce the weight of automobiles and aircrafts, lightweight materials, such as aluminum alloy, advanced high strength steel, composite materials, are widely used to replace the traditional materials like mild steel. Composite materials are complicated in material mechanical properties and less investigated compared to metallic materials. Engineering composites can be categorized into polymer matrix composites (PMCs), metal matrix composites (MMCs) and ceramic matrix composites (CMCs) according to their matrix materials.A set of mechanical experiments ranging from micro scale (single fiber composite and thin film composite) to macro scale (PMCs and MMCs) were conducted to fully understand the material behavior of composite materials. Loading conditions investigated includes uniaxial tension, three-point bending, uniaxial compression, simple shear, tension combined with shear, and compression combined with shear.For single fiber composite and thin-film composite, details of each composition are modelled. For the PMCs and MMCs which have plenty of reinforcements like fibers and particles, the details of the composition of structures cannot be modelled due to the current limitations of computing power. A mechanics framework of composite materials including elasticity, plasticity, failure initiation and post failure softening is proposed and applied to two types of composite materials.Uniaxial tension loading is applied to several single fiber composites and thin film composites. A surprising phenomenon, controllable and sequential fragmentation of the brittle fiber to produce uniformly sized rods along meters of polymer cladding, rather than the expected random or chaotic fragmentation, is observed with a necking propagation process. A combination of necking propagation model, fiber cracking model and interfacial model are proposed and applied to the finite element simulations. Good predictions of necking propagation and uniform fragmentation phenomenon are achieved. This modeling method of the micro-scale phenomenon reveals the physics inside composites in micro scale and helps the understanding of the process of nano fragmentation.Unidirectional carbon fiber composites were tested under multi-axial loading conditions including tensile/compression/shear loadings along and perpendicular to the fiber direction. Compression dominated tests showed a brittle fracture mode like local kicking/buckling, while tension dominated tests showed a fracture mode like delamination and fiber breakage. Simple shear tests with displacement control showed matrix material hardening and softening before total failure. The proposed modeling framework is successfully applied to the PMCs. A new parameter ? was introduced to represent different loading conditions of PMCs. Numerical simulations using finite element method well duplicated the anisotropic elasticity and plasticity of this material. Failure features like delamination was simulated using cohesive surface feature. It is also applied to carbon fiber composite laminates to further validate the proposed model.A round of experimental study on high volume fraction of metallic matrix nano composites was conducted, including uniaxial tension, uniaxial compression, and three-point bending. The example materials were two magnesium matrix composites reinforced with 10 and 15% vol. SiC particles (50nm size). Brittle fracture mode was exhibited under uniaxial tension and three-point bending, while shear dominated ductile fracture mode (up to 12% fracture strain) was observed under uniaxial compression. Transferring the Modified Mohr Coulomb (MMC) ductile fracture model to the stress based MMC model (sMMC), the proposed modeling framework is applied to this material. This model has been demonstrated to be capable of predicting the coexistence of brittle and ductile fracture modes under different loading conditions for MMCs. Numerical simulations using finite element method well duplicated the material strength, fracture initiation sites and crack propagation modes of the Mg/SiC nano composites with a good accuracy.
Show less
Date Issued: 2018
Identifier: CFE0007078, ucf:51977
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0007078

Title: Processing, Characterization and Performance of Carbon Nanopaper Based Multifunctional Nanocomposites.
Creator: Liang, Fei, Gou, Jihua, Su, Ming, Fang, Jiyu, Orlovskaya, Nina, Xu, Yunjun, University of Central Florida
Abstract / Description: Carbon nanofibers (CNFs) used as nano-scale reinforcement have been extensively studied since they are capable of improving the physical and mechanical properties of conventional fiber reinforced polymer composites. However, the properties of CNFs are far away from being fully utilized in the composites due to processing challenges including the dispersion of CNFs and the viscosity increase of polymer matrix. To overcome these issues, a unique approach was developed by making carbon nanopaper...
Show moreCarbon nanofibers (CNFs) used as nano-scale reinforcement have been extensively studied since they are capable of improving the physical and mechanical properties of conventional fiber reinforced polymer composites. However, the properties of CNFs are far away from being fully utilized in the composites due to processing challenges including the dispersion of CNFs and the viscosity increase of polymer matrix. To overcome these issues, a unique approach was developed by making carbon nanopaper sheet through the filtration of well-dispersed carbon nanofibers under controlled processing conditions, and integrating carbon nanopaper sheets into composite laminates using autoclave process and resin transfer molding (RTM). This research aims to fundamentally study the processing-structure-property-performance relationship of carbon nanopaper-based nanocomposites multifunctional applications: a) Vibrational damping. Carbon nanofibers with extremely high aspect ratios and low density present an ideal candidate as vibrational damping material; specifically, the large specific area and aspect ratio of carbon nanofibers promote significant interfacial friction between carbon nanofiber and polymer matrix, causing higher energy dissipation in the matrix. Polymer composites with the reinforcement of carbon nanofibers in the form of a paper sheet have shown significant vibration damping improvement with a damping ratio increase of 300% in the nanocomposites. b) Wear resistance. In response to the observed increase in toughness of the nanocomposites, tribological properties of the nanocomposite coated with carbon nanofiber/ceramic particles hybrid paper have been studied. Due to high strength and toughness, carbon nanofibers can act as microcrack reducer; additionally, the composites coated with such hybrid nanopaper of carbon nanofiber and ceramic particles shown an improvement of reducing coefficient of friction (COF) and wear rate. c) High electrical conductivity. A highly conductive coating material was developed and applied on the surface of the composites for the electromagnetic interference shielding and lightning strike protection. To increase the conductivity of the carbon nanofiber paper, carbon nanofibers were modified with nickel nanostrands. d) Electrical actuation of SMP composites. Compared with other methods of SMP actuation, the use of electricity to induce the shape-memory effect of SMP is desirable due to the controllability and effectiveness. The electrical conductivity of carbon fiber reinforced SMP composites can be significantly improved by incorporating CNFs and CNF paper into them. A vision-based system was designed to control the deflection angle of SMP composites to desired values. The funding support from National Science Foundation and FAA Center of Excellence for Commercial Space Transportation (FAA COE CST) is acknowledged.
Show less
Date Issued: 2012
Identifier: CFE0004569, ucf:49194
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0004569

Title: Modeling of Thermal Properties of Fiber Glass Polyester Resin Composite Under Thermal Degradation Condition.
Creator: Tsoi, Marvin, Chen, Ruey-Hung, Gou, Jihua, Ilie, Marcel, University of Central Florida
Abstract / Description: Composites, though used in a variety of applications from chairs and office supplies to structures of U.S. Navy ships and aircrafts, are not all designed to hold up to extreme heat flux and high temperature. Fiber-reinforced polymeric composites (FRPC) have been proven to provide the much needed physical and mechanical properties under fire exposure. FRPC notable features are its combination of high specific tensile strength, low weight, along with good corrosion and fatigue resistance....
Show moreComposites, though used in a variety of applications from chairs and office supplies to structures of U.S. Navy ships and aircrafts, are not all designed to hold up to extreme heat flux and high temperature. Fiber-reinforced polymeric composites (FRPC) have been proven to provide the much needed physical and mechanical properties under fire exposure. FRPC notable features are its combination of high specific tensile strength, low weight, along with good corrosion and fatigue resistance. However FRPC are susceptible to thermal degradation and decomposition, which yields flammable gas, and are thus highly combustible. This property restricts polymeric material usage.This study developed a numerical model that simulated the degradation rate and temperature profiles of a fiber-reinforced polyester resin composite exposed to a constant heat flux and hydrocarbon fire in a cone calorimeter. A numerical model is an essential tool because it gives the composite designer the ability to predict results in a time and cost efficient manner. The goal of this thesis is to develop a numerical model to simulate a zonal-layer polyester resin and fiber-glass mat composite and then validate the model with experimental results from a cone calorimeter. By inputting the thermal properties of the layered composite of alternating polymer and polymer-infused glass fiber mat layers, the numerical model is one step closer to representing the experimental data from the cone calorimeter test. The final results are achieved through adding a simulated heat flux from the pilot ignition of the degraded gas of the polyester resin. The results can be coupled into a mechanical model, which may be separately constructed for future study on the mechanical strength of composites under fire conditions.
Show less
Date Issued: 2011
Identifier: CFE0004171, ucf:49076
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0004171

bond (3)	+ -
nanocomposites (3)	+ -
piezospectroscopy (3)	+ -
Basalt Fiber (2)	+ -
Finite Element Analysis (2)	+ -

Shape Memory Polymer (2)	+ -
TBC (2)	+ -
Testbed (2)	+ -
XRD (2)	+ -
biaxial stress (2)	+ -
carbon nanopaper (2)	+ -
composite (2)	+ -
deck (2)	+ -
shape memory polymer (2)	+ -
synchrotron (2)	+ -
ASTM D4812 (1)	+ -
ASTM D6671 (1)	+ -
Accelerated bridge construction (1)	+ -
Acoustic Thermography (1)	+ -
Acropora cervicornis (1)	+ -
Aerodynamics (1)	+ -
All-strain Based Modified-Mohr-Coulomb Fracture Model (1)	+ -
Alumina reinforcement (1)	+ -
Aluminium magnesium boride (1)	+ -
Anisotropic Fracture (1)	+ -
Anisotropic plasticity (1)	+ -
BUBBLE DYNAMICS (1)	+ -
Bond-Slip (1)	+ -
Buckypaper (1)	+ -
CMC (1)	+ -

Gou, Jihua (47)	+ -
University of Central Florida (47)	+ -
Raghavan, Seetha (14)	+ -
Xu, Yunjun (10)	+ -
Bai, Yuanli (9)	+ -

Lin, Kuo-Chi (9)	+ -
Mackie, Kevin (6)	+ -
Orlovskaya, Nina (6)	+ -
Chopra, Manoj (4)	+ -
Gordon, Ali (4)	+ -
Challapalli, Suryanarayana (3)	+ -
Kapat, Jayanta (3)	+ -
Kassab, Alain (3)	+ -
Kwok, Kawai (3)	+ -
Zhai, Lei (3)	+ -
Al-Jelawy, Haider (2)	+ -
An, Linan (2)	+ -
Blair, Richard (2)	+ -
Chen, Ruey-Hung (2)	+ -
Freihofer, Gregory (2)	+ -
Ghosh, Ranajay (2)	+ -
Kauffman, Jeffrey L. (2)	+ -
Makris, Nicos (2)	+ -
Manero, Albert (2)	+ -
Mark, August (2)	+ -
Thompson, Kenneth (2)	+ -
Wang, Xin (2)	+ -
Xie, Zhilin (2)	+ -
Xu, Chengying (2)	+ -
Zhuge, Jinfeng (2)	+ -

Search In

Pages

Pages

Sort Results By:

Narrow results by:

Topical Subject

Collection

Type of Resource

Language

Creator

Format

Owner