Current Search:   Lail, Brian (x)

View All Items

  • CSV Spreadsheet
(1 - 3 of 3)
DEMONSTRATING REFLECTARRAY BEHAVIOR AT INFRARED
Title
DEMONSTRATING REFLECTARRAY BEHAVIOR AT INFRARED.
Creator
Ginn, James, Lail, Brian, University of Central Florida
Abstract / Description
Reflectarrays are traditionally passive, planar microstrip antenna devices designed for reflected phase manipulation at each individual antenna element making up the array. By varying the phase response across the surface with the antenna elements, reflectarrays allows a planar surface to exhibit electromagnetically an arbitrary geometry, such as a spherical surface. Initially proposed as a low-cost replacement for bulky parabolic reflectors, reflectarrays have been successfully developed and...
Show moreReflectarrays are traditionally passive, planar microstrip antenna devices designed for reflected phase manipulation at each individual antenna element making up the array. By varying the phase response across the surface with the antenna elements, reflectarrays allows a planar surface to exhibit electromagnetically an arbitrary geometry, such as a spherical surface. Initially proposed as a low-cost replacement for bulky parabolic reflectors, reflectarrays have been successfully developed and utilized at both RF and millimeter-wave frequencies. From the standpoint of an optical systems designer, adapting low-frequency reflectarray technology to develop a sub-millimeter and infrared reflectarray (SMIR) would provide a highly desirable alternative to similarly behaved polished or diffractive optical devices. Compared to traditional optical reflectors, SMIRs should be cheaper to fabricate, have a smaller physical footprint, allow for utility stacking, and encourage direct integration of aberration correction. To demonstrate the feasibility of utilizing reflectarray technology at infrared (IR), a simple SMIR proof of concept has been successfully designed, fabricated, and tested. The SMIR is comprised of three independent arrays or "stripes" of a single size element on a coated optical flat. Actual reflectarray elements consist of variable size patches that exhibit higher operating bandwidths than reflectarrays utilizing other types of elements and are easier to fabricate at small dimensions. For testing, each stripe element has been chosen to exhibit a unique phase shift for measurement using an IR interferometer. Preliminary investigation of future reflectarray development is also discussed. Emphasis is placed on improving operating bandwidth, development of a planar focusing element, and aberration correction. With further development, SMIR technology should present a powerful tool for low cost, flexible optical system design.
Show less
Date Issued
2006
Identifier
CFE0001037, ucf:46814
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0001037
Infrared Tapered Slot Antennas Coupled to Tunnel Diodes
Title
Infrared Tapered Slot Antennas Coupled to Tunnel Diodes.
Creator
Florence, Louis, Boreman, Glenn, Likamwa, Patrick, Schoenfeld, Winston, Lail, Brian, University of Central Florida
Abstract / Description
Tapered slot antennas (TSAs) have seen considerable application in the millimeter-wave portion of the spectrum. Desirable characteristics of TSAs include symmetric E- and H-plane antenna patterns, and broad non-resonant bandwidths. We investigate extension of TSA operation toward higher frequencies in the thermal infrared (IR), using a metal-oxide-metal diode as the detector. Several different infrared TSA design forms are fabricated using electron-beam lithography and specially developed...
Show moreTapered slot antennas (TSAs) have seen considerable application in the millimeter-wave portion of the spectrum. Desirable characteristics of TSAs include symmetric E- and H-plane antenna patterns, and broad non-resonant bandwidths. We investigate extension of TSA operation toward higher frequencies in the thermal infrared (IR), using a metal-oxide-metal diode as the detector. Several different infrared TSA design forms are fabricated using electron-beam lithography and specially developed thin-film processes. The angular antenna patterns of TSA-coupled diodes are measured at 10.6 micrometer wavelength in both E- and H-planes, and are compared to results of finite-element electromagnetic modeling using Ansoft HFSS. Parameter studies are carried out, correlating the geometric and material properties of several TSA design forms to numerical-model results and to measurements. A significant increase in antenna gain is noted for a dielectric-overcoat design. The traveling-wave behavior of the IR TSA structure is investigated using scattering near-field microscopy. The measured near-field data is compared to HFSS results. Suggestions for future research are included.
Show less
Date Issued
2012
Identifier
CFE0004376, ucf:49395
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0004376
Large Area Conformal Infrared Frequency Selective Surfaces
Title
Large Area Conformal Infrared Frequency Selective Surfaces.
Creator
Darchangel, Jeffrey, Schoenfeld, Winston, Boreman, Glenn, Likamwa, Patrick, Kik, Pieter, Lail, Brian, University of Central Florida
Abstract / Description
Frequency selective surfaces (FSS) were originally developed for electromagnetic filtering applications at microwave frequencies. Electron-beam lithography has enabled the extension of FSS to infrared frequencies; however, these techniques create sample sizes that are seldom appropriate for real world applications due to the size and rigidity of the substrate. A new method of fabricating large area conformal infrared FSS is introduced, which involves releasing miniature FSS arrays from a...
Show moreFrequency selective surfaces (FSS) were originally developed for electromagnetic filtering applications at microwave frequencies. Electron-beam lithography has enabled the extension of FSS to infrared frequencies; however, these techniques create sample sizes that are seldom appropriate for real world applications due to the size and rigidity of the substrate. A new method of fabricating large area conformal infrared FSS is introduced, which involves releasing miniature FSS arrays from a substrate for implementation in a coating. A selective etching process is proposed and executed to create FSS particles from crossed-dipole and square-loop FSS arrays. When the fill-factor of the particles in the measurement area is accounted for, the spectral properties of the FSS flakes are similar to the full array from which they were created. As a step toward scalability of the process, a square-patch design is presented and formed into FSS flakes with geometry within the capability of ultraviolet optical lithography.Square-loop infrared FSS designs are investigated both in quasi-infinite arrays and in truncated sub-arrays. First, scattering-scanning near-field optical microscopy (s-SNOM) is introduced as a characterization method for square-loop arrays, and the near-field amplitude and phase results are discussed in terms of the resonant behavior observed in far-field measurements. Since the creation of FSS particles toward a large area coating inherently truncates the arrays, array truncation effects are investigated for square-loop arrays both in the near- and far-field. As an extension of the truncation study, small geometric changes in the design of square-loop arrays are introduced as a method to tune the resonant far-field wavelength back to that of the quasi-infinite arrays.
Show less
Date Issued
2014
Identifier
CFE0005476, ucf:50348
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0005476