View All Items

Title: WAVELENGTH-DIVISION-MULTIPLEXED TRANSMISSION USING SEMICONDUCTOR OPTICAL AMPLIFIERS AND ELECTRONIC IMPAIRMENT COMPENSATION.
Creator: LI, XIAOXU, Li, Guifang, University of Central Florida
Abstract / Description: Over the last decade, rapid growth of broadband services necessitated research aimed at increasing transmission capacity in fiber-optic communication systems. Wavelength division multiplexing (WDM) technology has been widely used in fiber-optic systems to fully utilize fiber transmission bandwidth. Among optical amplifiers for WDM transmission, semiconductor optical amplifier (SOA) is a promising candidate, thanks to its broad bandwidth, compact size, and low cost. In transmission systems...
Show moreOver the last decade, rapid growth of broadband services necessitated research aimed at increasing transmission capacity in fiber-optic communication systems. Wavelength division multiplexing (WDM) technology has been widely used in fiber-optic systems to fully utilize fiber transmission bandwidth. Among optical amplifiers for WDM transmission, semiconductor optical amplifier (SOA) is a promising candidate, thanks to its broad bandwidth, compact size, and low cost. In transmission systems using SOAs, due to their large noise figures, high signal launching powers are required to ensure reasonable optical signal-to-noise ratio of the received signals. Hence the SOAs are operated in the saturation region and the signals will suffer from SOA impairments including self-gain modulation, self-phase modulation, and inter channel crosstalk effects such as cross-gain modulation, cross-phase modulation, and four-wave mixing in WDM. One possibility to circumvent these nonlinear impairments is to use constant-intensity modulation format in the 1310 nm window where dispersion is also negligible. In this dissertation, differential phase-shift keying (DPSK) WDM transmission in the 1310 nm window using SOAs was first considered to increase the capacity of existing telecommunication network. A WDM transmission of 4 × 10 Gbit/s DPSK signals over 540 km standard single mode fiber (SSMF) using cascaded SOAs was demonstrated in a recirculating loop. In order to increase the transmission reach of such WDM systems, those SOA impairments must be compensated. To do so, an accurate model for quantum-dot (QD) SOA must be established. In this dissertation, the QD-SOA was modeled with the assumption of overall charge neutrality. Static gain was calculated. Optical modulation response and nonlinear phase noise were studied semi-analytically based on small-signal analysis. The quantitative studies show that an ultrafast gain recovery time of ~0.1 ps can be achieved when QD-SOAs are under high current injection, which leads to high saturation output power. However more nonlinear phase noise is induced when the QD-SOAs are used in the transmission systems operating at 10 Gbit/s or 40 Gbit/s. Electronic post-compensation for SOA impairments using coherent detection and digital signal processing (DSP) was investigated next in this dissertation. An on-off keying transmission over 100 km SSMF using three SOAs at 1.3 um were demonstrated experimentally with direct detection and SOA impairment compensation. The data pattern effect of the signal was compensated effectively. Both optimum launching power and Q-factor were improved by 8 dB. For advanced modulation formats involving phase modulation or in transmission windows with large dispersion, coherent detection must be used and fiber impairments in WDM systems need to be compensated as well. The proposed fiber impairment compensation is based on digital backward propagation. The corresponding DSP implementation was described and the required calculations as well as system latency were derived. Finally joint SOA and fiber impairment compensations were experimentally demonstrated for an amplitude-phase-shift keying transmission.
Show less
Date Issued: 2009
Identifier: CFE0002932, ucf:47960
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0002932

Title: ALL-OPTICAL REGENERATION FOR PHASE-SHIFT KEYED OPTICAL COMMUNICATION SYSTEMS.
Creator: Croussore, Kevin, Li, Guifang, University of Central Florida
Abstract / Description: All-optical signal processing techniques for phase-shift keyed (PSK) systems were developed theoretically and demonstrated experimentally. Nonlinear optical effects in fibers, in particular four-wave mixing (FWM) that occurs via the ultra-fast Kerr nonlinearity, offer a flexible framework within which numerous signal processing functions can be accomplished. This research has focused on the regenerative capabilities of various FWM configurations in the context of processing PSK signals. Phase...
Show moreAll-optical signal processing techniques for phase-shift keyed (PSK) systems were developed theoretically and demonstrated experimentally. Nonlinear optical effects in fibers, in particular four-wave mixing (FWM) that occurs via the ultra-fast Kerr nonlinearity, offer a flexible framework within which numerous signal processing functions can be accomplished. This research has focused on the regenerative capabilities of various FWM configurations in the context of processing PSK signals. Phase-preserving amplitude regeneration, phase regeneration, and phase-regenerative wavelength conversion are analyzed and demonstrated experimentally. The single-pump phase-conjugation process was used to regenerate RZ-DPSK pulse amplitudes with different input noise distributions, and the impact on output phase characteristics was studied. Experiments revealed a limited range over which amplitude noise could effectively be suppressed without introduction of phase noise, particularly for signals with intensity pattern effects. Phase regeneration requires use of phase-sensitive amplification (PSA), which occurs in nonlinear interferometers when the pump and signal frequencies are degenerate (NI-PSA), or in fiber directly through single-stage (degenerate) or cascaded (non-degenerate) FWM processes. A PSA based on a Sagnac interferometer provided the first experimental demonstration of DPSK phase and amplitude regeneration. The phase-regenerative capabilities of the NI-PSA are limited in practice by intrinsic noise conversion (amplitude to phase noise) and to a lesser extent by the requirement to modulate the pump wave to suppress stimulated Brillouin scattering (SBS). These limitations are relaxed in novel materials with higher SBS thresholds and nonlinearities. Degenerate FWM provides PSA in a traveling-wave configuration that intrinsically suppresses the noise conversion affecting the NI-PSA, while providing stronger phase-matched gain. Experiments confirmed superior phase-regenerative behavior to the NI-PSA with simultaneous reduction of amplitude noise for NRZ-DPSK signals. Phase-regenerative wavelength conversion (PR-WC) provides the regenerative properties of PSA at a new wavelength, and was proposed and demonstrated for the first time in this research. The parallel implementation of two FWM processes, phase-conjugation and frequency conversion, provides two idlers which exhibit interesting and useful regenerative properties. These were investigated theoretically and experimentally. Ideal phase-regenerative behavior is predicted when the contributing FWM processes are equally phase-matched, which can be maintained over any interaction length or wavelength shift provided the pump powers are properly adjusted. Depleted-pump regime PR-WC provides simultaneous phase and amplitude regeneration. Experiments confirmed regenerative behavior for wavelength shifts of the idlers up to 5 nm. Two techniques for phase regeneration of 4-level PSK signals were developed and evaluated. The first is based on parallel operation of PSAs suitable for processing 2-level PSK signals, where phase projection and regeneration are combined to recover the input data. Analysis of this scheme outlined the conditions required for effective phase regeneration and for practical implementation using known PSAs. A novel process based on FWM (parallel phase-conjugation followed by PSA) was developed and analyzed, and demonstrated using numerical simulations. These studies provide a basis for further work in this area.
Show less
Date Issued: 2007
Identifier: CFE0001923, ucf:47473
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0001923

Title: PHASE AND AMPLITUDE MODULATED OFDM FOR DISPERSION MANAGED WDM SYSTEMS.
Creator: Eisele, Andreas, Li, Guifang, University of Central Florida
Abstract / Description: Amplitude and phase modulated optical OFDM (Orthogonal Frequency Division Multiplexing) are analyzed in a 50GBit/s single channel and 40GBit/s 5 channel 512 subcarrier non-ideal dispersion-compensated fiber optic communication systems. PM-OFDM is investigated as an alternative to AM-OFDM to alleviate the problem associated with amplitude-modulated signals in a nonlinear medium. The inherent dispersion compensation capability in OFDM (using a cyclic prefix) allows transmission over a link...
Show moreAmplitude and phase modulated optical OFDM (Orthogonal Frequency Division Multiplexing) are analyzed in a 50GBit/s single channel and 40GBit/s 5 channel 512 subcarrier non-ideal dispersion-compensated fiber optic communication systems. PM-OFDM is investigated as an alternative to AM-OFDM to alleviate the problem associated with amplitude-modulated signals in a nonlinear medium. The inherent dispersion compensation capability in OFDM (using a cyclic prefix) allows transmission over a link whose dispersion map is not exactly known. OFDM also mitigates the effects of dispersion slope in wavelength-division multiplexed (WDM) systems. Moreover, the overall dispersion throughout the transmission link may vary due to environmental effects and aging. OFDM is inherently tolerant to over- or under-compensation and dispersion slope mismatch. OFDM transmission over dispersive, non-dispersion managed fiber links using OFDM requires an overhead in excess of the maximum accumulated dispersion. Existing WDM systems usually employ periodic dispersion management. OFDM in these systems requires a smaller overhead. It is, however, more susceptible to nonlinearity due to the coherent beating of subcarriers after each dispersion-compensated span. The large variation in intensity associated with amplitude-modulated OFDM makes this modulation format more susceptible to nonlinear effects in fiber compared to phase-modulated signals. This holds true unless dispersion and EDFA noise lead to amplitude variations strong enough for PM-OFDM to be degraded by nonlinear effects as well. In conclusion OFDM is beneficial for non-ideal dispersion managed systems. PM-OFDM can further improve the performance.
Show less
Date Issued: 2008
Identifier: CFE0002492, ucf:47682
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0002492

Title: DIGITAL SIGNAL PROCESSING TECHNIQUES FOR COHERENT OPTICAL COMMUNICATION.
Creator: Goldfarb, Gilad, Li, Guifang, University of Central Florida
Abstract / Description: Coherent detection with subsequent digital signal processing (DSP) is developed, analyzed theoretically and numerically and experimentally demonstrated in various fiber‐optic transmission scenarios. The use of DSP in conjunction with coherent detection unleashes the benefits of coherent detection which rely on the preservation of full information of the incoming field. These benefits include high receiver sensitivity, the ability to achieve high spectral‐efficiency and the use of...
Show moreCoherent detection with subsequent digital signal processing (DSP) is developed, analyzed theoretically and numerically and experimentally demonstrated in various fiber‐optic transmission scenarios. The use of DSP in conjunction with coherent detection unleashes the benefits of coherent detection which rely on the preservation of full information of the incoming field. These benefits include high receiver sensitivity, the ability to achieve high spectral‐efficiency and the use of advanced modulation formats. With the immense advancements in DSP speeds, many of the problems hindering the use of coherent detection in optical transmission systems have been eliminated. Most notably, DSP alleviates the need for hardware phase‐locking and polarization tracking, which can now be achieved in the digital domain. The complexity previously associated with coherent detection is hence significantly diminished and coherent detection is once again considered a feasible detection alternative. In this thesis, several aspects of coherent detection (with or without subsequent DSP) are addressed. Coherent detection is presented as a means to extend the dispersion limit of a duobinary signal using an analog decision‐directed phase‐lock loop. Analytical bit‐error ratio estimation for quadrature phase‐shift keying signals is derived. To validate the promise for high spectral efficiency, the orthogonal‐wavelength‐division multiplexing scheme is suggested. In this scheme the WDM channels are spaced at the symbol rate, thus achieving the spectral efficiency limit. Theory, simulation and experimental results demonstrate the feasibility of this approach. Infinite impulse response filtering is shown to be an efficient alternative to finite impulse response filtering for chromatic dispersion compensation. Theory, design considerations, simulation and experimental results relating to this topic are presented. Interaction between fiber dispersion and nonlinearity remains the last major challenge deterministic effects pose for long‐haul optical data transmission. Experimental results which demonstrate the possibility to digitally mitigate both dispersion and nonlinearity are presented. Impairment compensation is achieved using backward propagation by implementing the split‐step method. Efficient realizations of the dispersion compensation operator used in this implementation are considered. Infinite‐impulse response and wavelet‐based filtering are both investigated as a means to reduce the required computational load associated with signal backward‐propagation. Possible future research directions conclude this dissertation.
Show less
Date Issued: 2008
Identifier: CFE0002384, ucf:47763
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0002384

Title: SYNCHRONIZATION IN ADVANCED OPTICAL COMMUNICATIONS.
Creator: Kim, Inwoong, Li, Guifang, University of Central Florida
Abstract / Description: All-optical synchronization and its application in advanced optical communications have been investigated in this dissertation. Dynamics of all-optical timing synchronization (clock recovery) using multi-section gain-coupled distributed-feedback (MS-GC DFB) lasers are discussed. A record speed of 180-GHz timing synchronization has been demonstrated using this device. An all-optical carrier synchronization (phase and polarization recovery) scheme from PSK (phase shift keying) data is proposed...
Show moreAll-optical synchronization and its application in advanced optical communications have been investigated in this dissertation. Dynamics of all-optical timing synchronization (clock recovery) using multi-section gain-coupled distributed-feedback (MS-GC DFB) lasers are discussed. A record speed of 180-GHz timing synchronization has been demonstrated using this device. An all-optical carrier synchronization (phase and polarization recovery) scheme from PSK (phase shift keying) data is proposed and demonstrated for the first time. As an application of all-optical synchronization, the characterization of advanced modulation formats using a linear optical sampling technique was studied. The full characterization of 10-Gb/s RZ-BPSK (return-to-zero binary PSK) data has been demonstrated. Fast lockup and walk-off of the all-optical timing synchronization process on the order of nanoseconds were measured in both simulation and experiment. Phase stability of the recovered clock from a pseudo-random bit sequence signal can be achieved by limiting the detuning between the frequency of free-running self-pulsation and the input bit rate. The simulation results show that all-optical clock recovery using TS-DFB lasers can maintain a better than 5 % clock phase stability for large variations in power, bit rate and optical carrier frequency of the input data and therefore is suitable for applications in ultrafast optical packet switching. All-optical timing synchronization of 180-Gb/s data streams has been demonstrated using a MS-GC DFB laser. The recovered clock has a jitter of less than 410 fs over a dynamic range of 7 dB. All-optical carrier synchronization from phase modulated data utilizes a phase sensitive oscillator (PSO), which used a phase sensitive amplifier (PSA) as a gain block. Furthermore, all-optical carrier synchronization from 10-Gb/s BPSK data was demonstrated in experiment. The PSA is configured as a nonlinear optical loop mirror (NOLM). A discrete linear system analysis was carried out to understand the stability of the PSO. Complex envelope measurement using coherent linear optical sampling with mode-locked sources is investigated. It is shown that reliable measurement of the phase requires that one of the optical modes of the sampling pulses be locked to the optical carrier of the data signal to be measured. Carrier-envelope offset (CEO) is found to have a negligible effect on the measurement. Measurement errors of the intensity profile and phase depend on the pulsewidth and chirp of the sampling pulses as well as the detuning between the carrier frequencies of the data signal and the center frequency of the sampling source. Characterization of the 10-Gb/s RZ-BPSK signal was demonstrated using the coherent detection technique. Measurements of the optical intensity profile, chirp and constellation diagram were demonstrated. A CW local oscillator was used and electrical sampling was performed using a sampling scope. A novel feedback scheme was used to stabilize homodyne detection.
Show less
Date Issued: 2006
Identifier: CFE0001239, ucf:52894
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0001239

Title: Thin-film Lithium Niobate Photonics for Electro-optics, Nonlinear Optics, and Quantum Optics on Silicon.
Creator: Rao, Ashutosh, Fathpour, Sasan, Delfyett, Peter, Li, Guifang, Thomas, Jayan, University of Central Florida
Abstract / Description: Ion-sliced thin-film lithium niobate (LN) compact waveguide technology has facilitated the resurgence of integrated photonics based on lithium niobate. These thin-film LN waveguides offer over an order of magnitude improvement in optical confinement, and about two orders of magnitude reduction in waveguide bending radius, compared to conventional LN waveguides. Harnessing the improved confinement, a variety of miniaturized and efficient photonic devices are demonstrated in this work. First,...
Show moreIon-sliced thin-film lithium niobate (LN) compact waveguide technology has facilitated the resurgence of integrated photonics based on lithium niobate. These thin-film LN waveguides offer over an order of magnitude improvement in optical confinement, and about two orders of magnitude reduction in waveguide bending radius, compared to conventional LN waveguides. Harnessing the improved confinement, a variety of miniaturized and efficient photonic devices are demonstrated in this work. First, two types of compact electrooptic modulators are presented (-) microring modulators, and Mach-Zehnder modulators. Next, two distinct approaches to nonlinear optical frequency converters are implemented (-) periodically poled lithium niobate, and mode shape modulation (grating assisted quasi-phase matching). Following this, stochastic variations are added to the mode shape modulation approach to demonstrate random quasi-phase matching. Afterward, broadband photon-pair generation is demonstrated in the miniaturized periodically poled lithium niobate, and spectral correlations of the biphoton spectrum are reported. Finally, extensions of the aforementioned results suitable for future work are discussed.
Show less
Date Issued: 2018
Identifier: CFE0007085, ucf:52013
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0007085

Title: Computational imaging systems for high-speed, adaptive sensing applications.
Creator: Sun, Yangyang, Pang, Sean, Li, Guifang, Schulzgen, Axel, Pensky, Marianna, University of Central Florida
Abstract / Description: Driven by the advances in signal processing and ubiquitous availability of high-speed low-cost computing resources over the past decade, computational imaging has seen the growing interest. Improvements on spatial, temporal, and spectral resolutions have been made with novel designs of imaging systems and optimization methods. However, there are two limitations in computational imaging. 1), Computational imaging requires full knowledge and representation of the imaging system called the...
Show moreDriven by the advances in signal processing and ubiquitous availability of high-speed low-cost computing resources over the past decade, computational imaging has seen the growing interest. Improvements on spatial, temporal, and spectral resolutions have been made with novel designs of imaging systems and optimization methods. However, there are two limitations in computational imaging. 1), Computational imaging requires full knowledge and representation of the imaging system called the forward model to reconstruct the object of interest. This limits the applications in the systems with a parameterized unknown forward model such as range imaging systems. 2), the regularization in the optimization process incorporates strong assumptions which may not accurately reflect the a priori distribution of the object. To overcome these limitations, we propose 1) novel optimization frameworks for applying computational imaging on active and passive range imaging systems and achieve 5-10 folds improvement on temporal resolution in various range imaging systems; 2) a data-driven method for estimating the distribution of high dimensional objects and a framework of adaptive sensing for maximum information gain. The adaptive strategy with our proposed method outperforms Gaussian process-based method consistently. The work would potentially benefit high-speed 3D imaging applications such as autonomous driving and adaptive sensing applications such as low-dose adaptive computed tomography(CT).
Show less
Date Issued: 2019
Identifier: CFE0007867, ucf:52784
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0007867

Title: Cryogenic performance projections for ultra-small oxide-free vertical-cavity surface-emitting lasers.
Creator: Bayat, Mina, Deppe, Dennis, Li, Guifang, Schoenfeld, Winston, Lyakh, Arkadiy, University of Central Florida
Abstract / Description: Small-sized vertical-cavity surface-emitting laser (VCSEL) may offer very low power consumption along with high reliability for cryogenic data transfer. Cryogenic data transfer has application in supercomputers and superconducting for efficient computing and also focal plane array cameras operating at 77 K, and at the lower temperature of 4 K for data extraction from superconducting circuits. A theoretical analysis is presented for 77 K and 4 K operation based on small cavity, oxide-free...
Show moreSmall-sized vertical-cavity surface-emitting laser (VCSEL) may offer very low power consumption along with high reliability for cryogenic data transfer. Cryogenic data transfer has application in supercomputers and superconducting for efficient computing and also focal plane array cameras operating at 77 K, and at the lower temperature of 4 K for data extraction from superconducting circuits. A theoretical analysis is presented for 77 K and 4 K operation based on small cavity, oxide-free VCSEL sizes of 2 to 6 (&)#181;m, that have been shown to operate efficiently at room temperature. Temperature dependent operation for optimally-designed VCSELs are studied by calculating the response of the laser at 77 K and 4 K to estimate their bias conditions needed to reach modulation speed for cryogenic optical links. The temperature influence is to decrease threshold for reducing temperature, and to increase differential gain for reducing temperature. The two effects predict very low bias currents for small cavity VCSELs to reach needed data speed for cryogenic optical data links. Projections are made for different cavity structures (half-wave cavity and full-wave cavity) shown that half-wave cavity structure has better performance. Changing the number of top-mirror pairs has also been studied to determine how cavity design impacts speed and bit energy. Our design and performance predictions paves the way for realizing highly efficient, ultra-small VCSEL arrays with applications in optical interconnects.
Show less
Date Issued: 2019
Identifier: CFE0007782, ucf:52330
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0007782

Title: Injection-locked semiconductor lasers for realization of novel RF photonics components.
Creator: Hoghooghi, Nazanin, Delfyett, Peter, Likamwa, Patrick, Li, Guifang, Malocha, Donald, University of Central Florida
Abstract / Description: This dissertation details the work has been done on a novel resonant cavity linear interferometric modulator and a direct phase detector with channel filtering capability using injection-locked semiconductor lasers for applications in RF photonics. First, examples of optical systems whose performance can be greatly enhanced by using a linear intensity modulator are presented and existing linearized modulator designs are reviewed. The novel linear interferometric optical intensity modulator...
Show moreThis dissertation details the work has been done on a novel resonant cavity linear interferometric modulator and a direct phase detector with channel filtering capability using injection-locked semiconductor lasers for applications in RF photonics. First, examples of optical systems whose performance can be greatly enhanced by using a linear intensity modulator are presented and existing linearized modulator designs are reviewed. The novel linear interferometric optical intensity modulator based on an injection-locked laser as an arcsine phase modulator is introduced and followed by numerical simulations of the phase and amplitude response of an injection-locked semiconductor laser. The numerical model is then extended to study the effects of the injection ratio, nonlinear cavity response, depth of phase and amplitude modulation on the spur-free dynamic range of a semiconductor resonant cavity linear modulator. Experimental results of the performance of the linear modulator implemented with a multi-mode Fabry-Perot semiconductor laser as the resonant cavity are shown and compared with the theoretical model. The modulator performance using a vertical cavity surface emitting laser as the resonant cavity is investigated as well. Very low V? in the order of 1 mV, multi-gigahertz bandwidth (-10 dB bandwidth of 5 GHz) and a spur-free dynamic range of 120 dB.Hz2/3 were measured directly after the modulator. The performance of the modulator in an analog link is experimentally investigated and the results show no degradation of the modulator linearity after a 1 km of SMF.The focus of the work then shifts to applications of an injection-locked semiconductor laser as a direct phase detector and channel filter. This phase detection technique does not require a local oscillator. Experimental results showing the detection and channel filtering capability of an injection-locked semiconductor diode laser in a three channel system are shown. The detected electrical signal has a signal-to-noise ratio better than 60 dB/Hz. In chapter 4, the phase noise added by an injection-locked vertical cavity surface emitting laser is studied using a self-heterodyne technique. The results show the dependency of the added phase noise on the injection ratio and detuning frequency. The final chapter outlines the future works on the linear interferometric intensity modulator including integration of the modulator on a semiconductor chip and the design of the modulator for input pulsed light.
Show less
Date Issued: 2012
Identifier: CFE0004385, ucf:49368
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0004385

Title: Computationally Efficient Digital Backward Propagation for Fiber Nonlinearity Compensation.
Creator: Zhu, Likai, Li, Guifang, Schulzgen, Axel, Likamwa, Patrick, Wei, Lei, University of Central Florida
Abstract / Description: The next generation fiber transmission system is limited by fiber nonlinearity. A distributed nonlinearity compensation method, known as Digital Backward Propagation (DBP), is necessary for effective compensation of the joint effect of dispersion and nonlinearity. However, in order for DBP to be accurate, a large number of steps are usually required for long-haul transmission, resulting in a heavy computational load.In real time DBP implementation, the FIR filters can be used for dispersion...
Show moreThe next generation fiber transmission system is limited by fiber nonlinearity. A distributed nonlinearity compensation method, known as Digital Backward Propagation (DBP), is necessary for effective compensation of the joint effect of dispersion and nonlinearity. However, in order for DBP to be accurate, a large number of steps are usually required for long-haul transmission, resulting in a heavy computational load.In real time DBP implementation, the FIR filters can be used for dispersion compensation and account for most of the computation per step. A method of designing a complementary filter pair is proposed. The individual errors in the frequency response of the two filters in a complementary filter pair cancel each other. As a result, larger individual filter error can be tolerated and the required filter length is significantly reduced.Unequal step size can be used in DBP to minimize the number of steps. For unrepeatered transmission with distributed Raman amplification, the Raman gain as a function of the distance and the effective fiber length of each DBP step need to be calculated by solving the differential equations of Raman amplification. The split-step DBP is performed only for transmission where the signal power is high.In comparison with solving the nonlinear Schrodinger equation (NLSE) for the total field of the WDM signal, solving the coupled NLSE requires a smaller step number and a lower sampling rate. In addition, the phase-locking between the local oscillators is not necessary for solving the coupled NLSE. The XPM compensation of WDM long-haul transmission by solving the coupled NLSE is experimentally demonstrated.At the optimum power level of fiber transmission, the total nonlinear phase shift is on the order of 1 radian. Therefore, for transoceanic fiber transmission systems which consist of many ((>)100) amplified fiber spans, the nonlinear effects in each span are weak. As a result, the optical waveform evolution is dominated by the dispersion. Taking advantage of the periodic waveform evolution in periodically dispersion managed fiber link, the DBP of K fiber spans can be folded into one span with K times the nonlinearity. This method can be called (")distance-folded DBP("). Under the weakly nonlinear assumption, the optical waveform repeats at locations where accumulated dispersions are identical. Consequently, the nonlinear behavior of the optical signal also repeats at locations of identical accumulative dispersion. Hence for a fiber link with arbitrary dispersion map, the DBP steps can be folded according to the accumulated dispersion. Experimental results show considerable savings in computation using this (")dispersion-folded DBP(") method. Simulation results show that the dramatically reduced computational load makes the nonlinearity-compensated dispersion-managed fiber link a competitive candidate for the next-generation transmission systems.
Show less
Date Issued: 2011
Identifier: CFE0004492, ucf:49272
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0004492

Title: Optical Fluid-based Photonic and Display Devices.
Creator: Xu, Su, Wu, Shintson, Li, Guifang, Moharam, M., Wu, Xinzhang, University of Central Florida
Abstract / Description: Conventional solid-state photonic devices exhibit an ultra-high optical performance and durability, but minimal adaptability. Recently, optical fluid-based photonic and display devices are emerging. By dynamically manipulating the optical interface formed by liquids, the optical output can be reconfigured or adaptively tuned in real time. Such devices exhibit some unique characteristics that are not achievable in conventional solid-state photonic devices. Therefore, they open a gateway for...
Show moreConventional solid-state photonic devices exhibit an ultra-high optical performance and durability, but minimal adaptability. Recently, optical fluid-based photonic and display devices are emerging. By dynamically manipulating the optical interface formed by liquids, the optical output can be reconfigured or adaptively tuned in real time. Such devices exhibit some unique characteristics that are not achievable in conventional solid-state photonic devices. Therefore, they open a gateway for new applications, such as image and signal processing, optical communication, sensing, and lab-on-a-chip, etc. Different operation principles of optical fluid-based photonic devices have been proposed, for instance fluidic pressure, electrochemistry, thermal effect, environmentally adaptive hydrogel, electro-wetting and dielectrophoresis. In this dissertation, several novel optical fluid-based photonic and display devices are demonstrated. Their working principles are described and electro-optic properties investigated.The first part involves photonic devices based on fluidic pressure. Here, we present a membrane-encapsulated liquid lens actuated by a photo-activated polymer. This approach paves a way to achieve non-mechanical driving and easy integration with other photonic devices. Next, we develop a mechanical-wetting lens for visible and short-wavelength infrared applications. Such a device concept can be extended to longer wavelength if proper liquids are employed.In the second part, we reveal some new photonic and display devices based on dielectrophoretic effects. We conceive a dielectric liquid microlens with well-shaped electrode for fixing the droplet position and lowering the operating voltage. To widen the dynamic range, we demonstrate an approach to enable focus tuning from negative to positive or vice versa in a single dielectric lens without any moving part. The possibility of fabricating microlens arrays with different aperture and density using a simple method is also proposed. Furthermore, the fundamental electro-optic characteristics of dielectric liquid droplets are studied from the aspects of operating voltage, frequency and droplet size. In addition to dielectric liquid lenses, we also demonstrate some new optical switches based on dielectrophoretic effect, e.g., optical switch based on voltage-stretchable liquid crystal droplet, variable aperture or position-shifting droplet. These devices work well in the visible and near infrared spectral ranges. We also extend this approach to display and show a polarizer-free and color filter-free display. Simple fabrication, low power consumption, polarization independence, relatively low operating voltage as well as reasonably fast switching time are their key features.
Show less
Date Issued: 2012
Identifier: CFE0004620, ucf:49943
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0004620

Title: Nonlinear integrated photonics on silicon and gallium arsenide substrates.
Creator: Ma, Jichi, Fathpour, Sasan, Hagan, David, Li, Guifang, Peale, Robert, University of Central Florida
Abstract / Description: Silicon photonics is nowadays a mature technology and is on the verge of becoming a blossoming industry. Silicon photonics has also been pursued as a platform for integrated nonlinear optics based on Raman and Kerr effects. In recent years, more futuristic directions have been pursued by various groups. For instance, the realm of silicon photonics has been expanded beyond the well-established near-infrared wavelengths and into the mid-infrared (3 (-) 5 (&)#181;m). In this wavelength range,...
Show moreSilicon photonics is nowadays a mature technology and is on the verge of becoming a blossoming industry. Silicon photonics has also been pursued as a platform for integrated nonlinear optics based on Raman and Kerr effects. In recent years, more futuristic directions have been pursued by various groups. For instance, the realm of silicon photonics has been expanded beyond the well-established near-infrared wavelengths and into the mid-infrared (3 (-) 5 (&)#181;m). In this wavelength range, the omnipresent hurdle of nonlinear silicon photonics in the telecommunication band, i.e., nonlinear losses due to two-photon absorption, is inherently nonexistent. With the lack of efficient light-emission capability and second-order optical nonlinearity in silicon, heterogeneous integration with other material systems has been another direction pursued. Finally, several approaches have been proposed and demonstrated to address the energy efficiency of silicon photonic devices in the near-infrared wavelength range. In this dissertation, theoretical and experimental works are conducted to extend applications of integrated photonics into mid-infrared wavelengths based on silicon, demonstrate heterogeneous integration of tantalum pentoxide and lithium niobate photonics on silicon substrates, and study two-photon photovoltaic effect in gallium arsenide and plasmonic-enhanced structures.Specifically, performance and noise properties of nonlinear silicon photonic devices, such as Raman lasers and optical parametric amplifiers, based on novel and reliable waveguide technologies are studied. Both near-infrared and mid-infrared nonlinear silicon devices have been studied for comparison. Novel tantalum-pentoxide- and lithium-niobate-on-silicon platforms are developed for compact microring resonators and Mach-Zehnder modulators. Third- and second-harmonic generations are theoretical studied based on these two platforms, respectively. Also, the two-photon photovoltaic effect is studied in gallium arsenide waveguides for the first time. The effect, which was first demonstrated in silicon, is the nonlinear equivalent of the photovoltaic effect of solar cells and offers a viable solution for achieving energy-efficient photonic devices. The measured power efficiency achieved in gallium arsenide is higher than that in silicon and even higher efficiency is theoretically predicted with optimized designs. Finally, plasmonic-enhanced photovoltaic power converters, based on the two-photon photovoltaic effect in silicon using subwavelength apertures in metallic films, are proposed and theoretically studied.
Show less
Date Issued: 2014
Identifier: CFE0005373, ucf:50441
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0005373

Title: Photonic Filtering for Applications in Microwave Generation and Metrology.
Creator: Bagnell, Marcus, Delfyett, Peter, Schoenfeld, Winston, Li, Guifang, Peale, Robert, University of Central Florida
Abstract / Description: This work uses the photonic filtering properties of Fabry-Perot etalons to show improvements in the electrical signals created upon photodetection of the optical signal. First, a method of delay measurement is described which uses multi-heterodyne detection to find correlations in white light signals at 20 km of delay to sub millimeter resolution. By filtering incoming white light with a Fabry-Perot etalon, the pseudo periodic signal is suitable for measurement by combining and photodetecting...
Show moreThis work uses the photonic filtering properties of Fabry-Perot etalons to show improvements in the electrical signals created upon photodetection of the optical signal. First, a method of delay measurement is described which uses multi-heterodyne detection to find correlations in white light signals at 20 km of delay to sub millimeter resolution. By filtering incoming white light with a Fabry-Perot etalon, the pseudo periodic signal is suitable for measurement by combining and photodetecting it with an optical frequency comb. In this way, optical data from a large bandwidth can be downconverted and sampled on low frequency electronics. Second, a high finesse etalon is used as a photonic filter inside an optoelectronic oscillator (OEO). The etalon's narrow filter function allows the OEO loop length to be extremely long for a high oscillator quality factor while still suppressing unwanted modes below the noise floor. The periodic nature of the etalon allows it to be used to generate a wide range of microwave and millimeter wave tones without degradation of the RF signal.
Show less
Date Issued: 2014
Identifier: CFE0005457, ucf:50396
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0005457

Title: Injection-Locked Vertical Cavity Surface Emitting Lasers (VCSELs) for Optical Arbitrary Waveform Generation.
Creator: Bhooplapur, Sharad, Delfyett, Peter, Li, Guifang, Christodoulides, Demetrios, Malocha, Donald, University of Central Florida
Abstract / Description: Complex optical pulse shapes are typically generated from ultrashort laser pulses by manipulating the optical spectrum of the input pulses. This generates complex but periodic time-domain waveforms. Optical Arbitrary Waveform Generation (OAWG) builds on the techniques of ultrashort pulse?shaping, with the goal of making non?periodic, truly arbitrary optical waveforms. Some applications of OAWG are coherently controlling chemical reactions on a femtosecond time scale, improving the performance...
Show moreComplex optical pulse shapes are typically generated from ultrashort laser pulses by manipulating the optical spectrum of the input pulses. This generates complex but periodic time-domain waveforms. Optical Arbitrary Waveform Generation (OAWG) builds on the techniques of ultrashort pulse?shaping, with the goal of making non?periodic, truly arbitrary optical waveforms. Some applications of OAWG are coherently controlling chemical reactions on a femtosecond time scale, improving the performance of LADAR systems, high?capacity optical telecommunications and ultra wideband signals processing.In this work, an array of Vertical Cavity Surface Emitting Lasers (VCSELs) are used as modulators, by injection-locking each VCSEL to an individual combline from an optical frequency comb source. Injection-locking ensures that the VCSELs' emission is phase coherent with the input combline, and modulating its current modulates mainly the output optical phase. The multi-GHz modulation bandwidth of VCSELs updates the output optical pulse shape on a pulse-to-pulse time scale, which is an important step towards true OAWG. In comparison, it is about a million times faster than the liquid-crystal modulator arrays typically used for pulse shaping! Novel components and subsystems of Optical Arbitrary Waveform Generation (OAWG) are developed and demonstrated in this work. They include:1.Modulators An array of VCSELs is packaged and characterized for use as a modulator for rapid?update pulse?shaping at GHz rates. The amplitude and phase modulation characteristics of an injection?locked VCSEL are simultaneously measured at GHz modulation rates.2.Optical Frequency Comb SourcesAn actively mode?locked semiconductor laser was assembled, with a 12.5 GHz repetition rate, ~ 200 individually resolvable comblines directly out of the laser, and high frequency stability. In addition, optical frequency comb sources are generated by modulation of a single frequency laser.3.High-resolution optical spectral demultiplexersThe demultiplexers are implemented using bulk optics, and are used to spatially resolve individual optical comblines onto the modulator array. 4.Optical waveform measurement techniques Several techniques are used to measure generated waveforms, especially for spectral phase measurements, including multi-heterodyne phase retrieval. In addition, an architecture for discriminating between ultrashort encoded optical pulses with record high sensitivity is demonstrated.
Show less
Date Issued: 2014
Identifier: CFE0005466, ucf:50402
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0005466

Title: Multimaterial fibers in photonics and nanotechnology.
Creator: Tao, Guangming, Abouraddy, Ayman, Li, Guifang, Glebov, Leonid, Peale, Robert, University of Central Florida
Abstract / Description: Recent progress in combing multiple materials with distinct optical, electronic, and thermomechanical properties monolithically in a kilometer-long fiber drawn from a preform offers unique multifunctionality at a low cost. A wide range of unique in-fiber devices have been developed in fiber form-factor using this strategy. Here, I summary my recent results in this nascent field of 'multimaterial fibers'. I will focus on my achievements in producing robust infrared optical fibers and in...
Show moreRecent progress in combing multiple materials with distinct optical, electronic, and thermomechanical properties monolithically in a kilometer-long fiber drawn from a preform offers unique multifunctionality at a low cost. A wide range of unique in-fiber devices have been developed in fiber form-factor using this strategy. Here, I summary my recent results in this nascent field of 'multimaterial fibers'. I will focus on my achievements in producing robust infrared optical fibers and in appropriating optical fiber production technology for applications in nanofabrication.The development of optical components suitable for the infrared (IR) is crucial for applications in this spectral range to reach the maturity level of their counterparts in the visible and near-infrared spectral regimes. A critical class of optical components that has yet to be fully developed is that of IR optical fibers. Here I will present several unique approaches that may result in low-cost, robust IR fibers that transmit light from 1.5 microns to 15 microns drawn from multimaterial preforms. These preforms are prepared exploiting the newly developed procedure of multimaterial coextrusion, which provides unprecedented flexibility in material choices and structure engineering in the extruded preform. I will present several different 'generations' of multimaterial extrusion that enable access to a variety of IR fibers. Examples of the IR fibers realized using this methodology include single mode IR fibers, large index-contrast IR fibers, IR imaging fiber bundles, IR photonic crystal and potentially photonic band-gap fibers.The complex structures produced in multimaterial fibers may also be used in the fabrication of micro- and nano-scale spherical particles by exploiting a recently discovered in-fiber Plateau-Rayleigh capillary instability. Such multimaterial structured particles have promising application in drug delivery, optical sensors, and nanobiotechnology. The benefits accrued from the multimaterial fiber methodology allow for the scalable fabrication of micro- and nano-scale particles having complex internal architectures, such as multi-shell particles, Janus-particles, and particles with combined control over the radial and azimuthal structure.Finally, I will summarize my views on the compatibility of a wide range of amorphous and crystalline materials with the traditional thermal fiber drawing process and with the more recent multimaterial fiber strategy.
Show less
Date Issued: 2014
Identifier: CFE0005555, ucf:50289
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0005555

Title: monolithically Integrated Broadly Tunable Light Emitters based on Selectively Intermixed Quantum Wells.
Creator: Zakariya, Abdullah, Likamwa, Patrick, Li, Guifang, Wahid, Parveen, Schoenfeld, Winston, University of Central Florida
Abstract / Description: A monolithically integrated broadly tunable MQW laser that utilizes a combined impurity-free vacancy disordering (IFVD) of quantum wells and optical beam steering techniques is proposed and investigated experimentally. The device consists of a beam-steering section and an optical amplifier section fabricated on a GaAs/AlGaAs quantum well (QW) p-i-n heterostructure. The beam steering section forms a reconfigurable optical waveguide that can be moved laterally by applying separately controlled...
Show moreA monolithically integrated broadly tunable MQW laser that utilizes a combined impurity-free vacancy disordering (IFVD) of quantum wells and optical beam steering techniques is proposed and investigated experimentally. The device consists of a beam-steering section and an optical amplifier section fabricated on a GaAs/AlGaAs quantum well (QW) p-i-n heterostructure. The beam steering section forms a reconfigurable optical waveguide that can be moved laterally by applying separately controlled electrical currents to two parallel contact stripes. The active core of the gain section is divided in into selectively intermixed regions. The selective intermixing of the QW in the gain section results in neighboring regions with different optical bandgaps. The wavelength tuning is accomplished by steering the amplified optical beam through the selected region where it experiences a peak in the gain spectrum determined by the degree of intermixing of the QW. The laser wavelength tunes to the peak in the gain spectrum of that region. The IFVD technique relies on a silica (SiO2) capped rapid thermal annealing and it has been found that the degree of intermixing of the QW with the barrier material is dependent on the thickness of the SiO2 film. The QW sample is first encapsulated with a 400nm thick SiO2 film grown by plasma enhanced chemical vapor deposition (PECVD). In the gain section, the SiO2 film is selectively etched using multiple photolithographic and reactive ion etching steps whereas the SiO2 film is left intact in all the remaining areas including the beam-steering section. The selective area quantum well intermixing is then induced by a single rapid thermal annealing step at 975(&)deg;C for a 20s duration to realize a structure with quantum well that has different bandgaps in the key regions. Optical characterizations of the intermixed regions have shown a blue shift of peak of the electroluminescence emission of 5nm, 16nm and 33nm for the uncapped, 100nm and 200nm respectively when compared to the as grown sample. The integrated laser exhibited a wavelength tuning range of 17nm (799nm to 816nm). Based on the same principle of QW selective intermixing, we have also designed and fabricated a monolithically integrated multi-wavelength light emitting diode (LED). The LED emits multiple wavelength optical beams from one compact easy to fabricate QW structure. Each wavelength has an independent optical power control, allowing the LED to emit one or more wavelengths at once. The material for the LED is the same AlGaAs/GaAs QW p-i-n heterostructure described above. The device is divided into selectively intermixed regions on a single QW structure using IFVD technique to create localized intermixed regions. Two different designs have been implemented to realize either an LED with multiple output beams of different wavelengths or an LED with a single output beam that has dual wavelength operation capabilities. Experimental results of the multiple output beams LED have demonstrated electrically controlled optical emission of 800nm, 789nm and 772nm. The single output LED has experimentally been shown to produce wavelength emission of 800nm and/or 772nm depending on electrical activation of the two aligned intermixed regions.
Show less
Date Issued: 2013
Identifier: CFE0005284, ucf:50560
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0005284

Title: Improving fairness, throughput and blocking performance for long haul and short reach optical networks.
Creator: Tariq, Sana, Bassiouni, Mostafa, Zou, Changchun, Turgut, Damla, Li, Guifang, University of Central Florida
Abstract / Description: Innovations in optical communication are expected to transform the landscape of global communications, internet and datacenter networks. This dissertation investigates several important issues in optical communication such as fairness, throughput, blocking probability and differentiated quality of service (QoS). Novel algorithms and new approaches have been presented to improve the performance of optical circuit switching (OCS) and optical burst switching (OBS) for long haul, and datacenter...
Show moreInnovations in optical communication are expected to transform the landscape of global communications, internet and datacenter networks. This dissertation investigates several important issues in optical communication such as fairness, throughput, blocking probability and differentiated quality of service (QoS). Novel algorithms and new approaches have been presented to improve the performance of optical circuit switching (OCS) and optical burst switching (OBS) for long haul, and datacenter networks. Extensive simulations tests have been conducted to evaluate the effectiveness of the proposed algorithms. These simulation tests were performed over a number of network topologies such as ring, mesh and U.S. Long-Haul, some high processing computing (HPC) topologies such as 2D and 6D mesh torus topologies and modern datacenter topologies such as FatTree and BCube.Two new schemes are proposed for long haul networks to improve throughput and hop count fairness in OBS networks. The idea is motivated by the observation that providing a slightly more priority to longer bursts over short bursts can significantly improve the throughput of the OBS networks without adversely affecting hop-count fairness. The results of extensive performance tests have shown that proposed schemes improve the throughput of optical OBS networks and enhance the hop-count fairness. Another contribution of this dissertation is the research work on developing routing and wavelength assignment schemes in multimode fiber networks. Two additional schemes for long haul networks are presented and evaluated over multimode fiber networks. First for alleviating the fairness problem in OBS networks using wavelength-division multiplexing as well as mode-division multiplexing while the second scheme for achieving higher throughput without sacrificing hop count fairness.We have also shown the significant benefits of using both mode division multiplexing and wavelength division multiplexing in real-life short-distance optical networks such as the optical circuit switching networks used in the hybrid electronic-optical switching architectures for datacenters. We evaluated four mode and wavelength assignment heuristics and compared their throughput performance. We also included preliminary results of impact of the cascaded mode conversion constraint on network throughput. Datacenter and high performance computing networks share a number of common performance goals. Another highly efficient adaptive mode wavelength- routing algorithm is presented over OBS networks to improve throughput of these networks. The effectiveness of the proposed model has been validated by extensive simulation results.In order to optimize bandwidth and maximize throughput of datacenters, an extension of TCP called multipath-TCP (MPTCP) has been evaluated over an OBS network using dense interconnect datacenter topologies. We have proposed a service differentiation scheme using MPTCP over OBS for datacenter traffic. The scheme is evaluated over mixed workload traffic model of datacenters and is shown to provide tangible service differentiation between flows of different priority levels. An adaptive QoS differentiation architecture is proposed for software defined optical datacenter networks using MPTCP over OBS. This scheme prioritizes flows based on current network state.
Show less
Date Issued: 2015
Identifier: CFE0005721, ucf:50146
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0005721

Title: Nonlinear Dynamics in Multimode Optical Fibers.
Creator: Eftekhar, Mohammad Amin, Christodoulides, Demetrios, Amezcua Correa, Rodrigo, Li, Guifang, Kaup, David, University of Central Florida
Abstract / Description: Multimode optical fibers have recently reemerged as a viable platform for addressing a number of long-standing issues associated with information bandwidth requirements and power-handling capabilities. The complex nature of heavily multimoded systems can be effectively exploited to observe altogether novel physical effects arising from spatiotemporal and intermodal linear and nonlinear processes. Here, we have studied nonlinear dynamics in multimode optical fibers (MMFs) in both the normal...
Show moreMultimode optical fibers have recently reemerged as a viable platform for addressing a number of long-standing issues associated with information bandwidth requirements and power-handling capabilities. The complex nature of heavily multimoded systems can be effectively exploited to observe altogether novel physical effects arising from spatiotemporal and intermodal linear and nonlinear processes. Here, we have studied nonlinear dynamics in multimode optical fibers (MMFs) in both the normal and anomalous dispersion regimes. In the anomalous dispersion regime, the nonlinearity leads to a formation of spatiotemporal 3-D solitons. Unlike in single-mode fibers, these solitons are not unique and their properties can be modified through the additional degrees of freedom offered by these multimoded settings. In addition, soliton related processes such as soliton fission and dispersive wave generation will be also drastically altered in such multimode systems. Our theoretical work unravels some of the complexities of the underlying dynamics and helps us better understand these effects. The nonlinear dynamics in such multimode systems can be accelerated through a judicious fiber design. A cancelation of Raman self-frequency shifts and Blue-shifting multimode solitons were observed in such settings as a result of an acceleration of intermodal oscillations. Spatiotemporal instabilities in parabolic-index multimode fibers will also be discussed. In the normal dispersion regime, this effect can be exploited to generate an ultrabroad and uniform supercontinuum that extends more than 2.5 octaves. To do so, the unstable spectral regions are pushed away from the pump, thus sweeping the entire spectrum. Multimode parabolic pulses were also predicted and observed in passive normally dispersive tapered MMFs. These setting can obviate the harsh bandwidth limitation present in single-mode system imposed by gain medium and be effectively used for realizing high power multimode fiber lasers. Finally, an instant and efficient second-harmonic generation was observed in the multimode optical fibers. Through a modification of initial conditions, the efficiency of this process could be enhanced to a record high of %6.5.
Show less
Date Issued: 2018
Identifier: CFE0007399, ucf:52063
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0007399

Title: Mode coupling in space-division multiplexed systems.
Creator: Liu, Huiyuan, Li, Guifang, Likamwa, Patrick, Amezcua Correa, Rodrigo, Chanda, Debashis, University of Central Florida
Abstract / Description: Even though fiber-optic communication systems have been engineered to nearly approach the Shannon capacity limit, they still cannot meet the exponentially-growing bandwidth demand of the Internet. Space-division multiplexing (SDM) has attracted considerable attention in recent years due to its potential to address this capacity crunch. In SDM, the transmission channels support more than one spatial mode, each of which can provide the same capacity as a single-mode fiber. To make SDM practical...
Show moreEven though fiber-optic communication systems have been engineered to nearly approach the Shannon capacity limit, they still cannot meet the exponentially-growing bandwidth demand of the Internet. Space-division multiplexing (SDM) has attracted considerable attention in recent years due to its potential to address this capacity crunch. In SDM, the transmission channels support more than one spatial mode, each of which can provide the same capacity as a single-mode fiber. To make SDM practical, crosstalk among modes must be effectively managed. This dissertation presents three techniques for crosstalk management for SDM. In some cases such as intra-datacenter interconnects, even though mode crosstalk cannot be completely avoided, crosstalk among mode groups can be suppressed in properly-designed few-mode fibers to support mode group-multiplexed transmission. However, in most cases, mode coupling is unavoidable. In free-space optical (FSO) communication, mode coupling due to turbulence manifests as wavefront distortions. Since there is almost no modal dispersion in FSO, we demonstrate the use of few-mode pre-amplified receivers to mitigate the effect of turbulence without using adaptive optics. In fiber-optic communication, multi-mode fibers or long-haul few-mode fibers not only suffer from mode crosstalk but also large modal dispersion, which can only be compensated electronically using multiple-input-multiple-output (MIMO) digital signal processing (DSP). In this case, we take the counterintuitive approach of introducing strong mode coupling to reduce modal group delay and DSP complexity.
Show less
Date Issued: 2019
Identifier: CFE0007831, ucf:52806
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0007831

Title: Optical Fibers for Space-Division Multiplexed Transmission and Networking.
Creator: Xia, Cen, Li, Guifang, Moharam, Jim, Abouraddy, Ayman, Christodoulides, Demetrios, Wu, Thomas, University of Central Florida
Abstract / Description: Single-mode fiber transmission can no longer satisfy exponentially growing capacity demand. Space-division multiplexing (SDM) appears to be the only way able to dramatically improve the transmission capacity, for which, novel optical fiber is one of the key technologies. Such fibers must possess the following characteristics: 1) high mode density per cross-sectional area and 2) low crosstalk or low modal differential group delay (DMGD) to reduce complexity of digital signal processing. In...
Show moreSingle-mode fiber transmission can no longer satisfy exponentially growing capacity demand. Space-division multiplexing (SDM) appears to be the only way able to dramatically improve the transmission capacity, for which, novel optical fiber is one of the key technologies. Such fibers must possess the following characteristics: 1) high mode density per cross-sectional area and 2) low crosstalk or low modal differential group delay (DMGD) to reduce complexity of digital signal processing. In this dissertation, we explore the design and characterization of three kinds of fibers for SDM: few-mode fiber (FMF), few-mode multi-core fiber (FM-MCF) and coupled multi-core fiber (CMCF) as well as their applications in transmission and networking.For the ultra-high density need of SDM, we have proposed the FMMCF. It combines advantages of both the FMF and MCF. The challenge is the inter-core crosstalk of the high-order modes. By applying a hole-assisted structure and careful fiber design, the LP11 crosstalk has been suppressed down to -40dB per km. This allows separate transmission on LP01 and LP11 modes without penalty. In fact, a robust SDM transmission up to 200Tb/s has been achieved using this fiber.To overcome distributed modal crosstalk in conjunction with DMGD, supermodes in CMCFs have been proposed. The properties of supermodes were investigated using the coupled-mode theory. The immediate benefits include high mode density and large effective area. In supermode structures, core-to-core coupling is exploited to reduce modal crosstalk or minimize DMGD. In addition, higher-order supermodes have been discovered in CMCFs with few-mode cores. We show that higher-order supermodes in different waveguide array configurations can be strongly affected by angle-dependent couplings, leading to different modal fields. Analytical solutions are provided for linear, rectangular and ring arrays. Higher-order modes have been observed for the first time using S2 imaging method.Finally, we introduce FMF to gigabit-capable passive optical networks (GPON). By replacing the conventional splitter with a photonic lantern, upstream combining loss can be eliminated. Low crosstalk has been achieved by a customized mode-selective photonic lantern carefully coupled to the FMF. We have demonstrated the first few-mode GPON system with error-free performance over 20-km 3-mode transmission using a commercial GPON system carrying live Ethernet traffic. We then scale the 3-mode GPON system to 5-mode, which resulted in a 4dB net gain in power budget in comparison with current commercial single-mode GPON systems.
Show less
Date Issued: 2015
Identifier: CFE0005910, ucf:50827
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0005910

Coherent Detection (2)	+ -
Digital Signal Processing (2)	+ -
Optical Fiber Communication (2)	+ -
VCSEL (2)	+ -
nonlinear optics (2)	+ -

pulse shaping (2)	+ -
silicon photonics (2)	+ -
space division multiplexing (2)	+ -
Accelerated Nonlinearities (1)	+ -
Adaptive Sensing (1)	+ -
Adaptive lens (1)	+ -
Beam Steering (1)	+ -
Coherent Fiber Communication (1)	+ -
Computaitonal Imaging (1)	+ -
Cryogenics. (1)	+ -
Datacenters (1)	+ -
Digital Backward Propagation (1)	+ -
Dispersive Waves (1)	+ -
Display (1)	+ -
Electro-Optic devices (1)	+ -
Fiber Amplifier (1)	+ -
Fiber Nonlinearity Compensation (1)	+ -
Fiber-Optic Communication (1)	+ -
Fourwave Mixing (1)	+ -
Impairment Compensation (1)	+ -
Integrated photonics (1)	+ -
LEDs (1)	+ -
Linear modulator (1)	+ -
Liquid crystal (1)	+ -
Multi-mode optical networks (1)	+ -

Li, Guifang (24)	+ -
University of Central Florida (24)	+ -
Delfyett, Peter (6)	+ -
Likamwa, Patrick (5)	+ -
Abouraddy, Ayman (4)	+ -

Christodoulides, Demetrios (4)	+ -
Schulzgen, Axel (4)	+ -
Amezcua Correa, Rodrigo (3)	+ -
Malocha, Donald (3)	+ -
Peale, Robert (3)	+ -
Schoenfeld, Winston (3)	+ -
Fathpour, Sasan (2)	+ -
Bagnell, Marcus (1)	+ -
Bai, Neng (1)	+ -
Bassiouni, Mostafa (1)	+ -
Bayat, Mina (1)	+ -
Bhooplapur, Sharad (1)	+ -
Chanda, Debashis (1)	+ -
Chen, Haoshuo (1)	+ -
Croussore, Kevin (1)	+ -
Davila-Rodriguez, Josue (1)	+ -
Deppe, Dennis (1)	+ -
Eftekhar, Mohammad Amin (1)	+ -
Eisele, Andreas (1)	+ -
Glebov, Leonid (1)	+ -
Goldfarb, Gilad (1)	+ -
Hagan, David (1)	+ -
Hoghooghi, Nazanin (1)	+ -
Huang, Bin (1)	+ -
Ip, Ezra (1)	+ -

Search In

Pages

Pages

Sort Results By:

Narrow results by:

Topical Subject

Collection

Type of Resource

Language

Creator

Format

Owner