View All Items

Title: Development and saw device implementation of a new weighted stepped chirp code signal for direct sequence spread spectrum communications systems.
Creator: Carter, Scott Edward, Malocha, Donald C., Engineering
Abstract / Description: University of Central Florida College of Engineering Thesis; This work introduces the new weighted stepped chirp code signal for direct sequence spread spectrum (DS/SS) communications systems. This code signal uses the truncated cosine series functions as the chip functions. This code signal is the result of discretizing a continuous wave (CW) chirp which results in enhanced performance versus a pseudonoise (PN) cose and equivalent performance and easier implementation than a CW chirp. This...
Show moreUniversity of Central Florida College of Engineering Thesis; This work introduces the new weighted stepped chirp code signal for direct sequence spread spectrum (DS/SS) communications systems. This code signal uses the truncated cosine series functions as the chip functions. This code signal is the result of discretizing a continuous wave (CW) chirp which results in enhanced performance versus a pseudonoise (PN) cose and equivalent performance and easier implementation than a CW chirp. This code signal will be shown to possess improved compression ratio (CR), peak sidelobe level (PSL), integrated sidelobe level (ISL), and bit error rate (BER) when compared to a PN code of identical code length and chip length. It also will be shown to have a similar CR, PSL, ISL, and loss in processing gain (LPG) when compared to a CW chirp with identical pulse length and frequency deviation. The code signal is implemented on surface acoustic wave (SAW) devices which can be used as the code signal generator at the transmitter and the correlator at the receiver in a DS/SS communication system. SAW design considerations for the weighted stepped chirp signal are discussed. Experimental data is presented and compared to the predicted CR, PSL, ISL, LPG, and BER.
Show less
Date Issued: 1998
Identifier: CFR0008153, ucf:52944
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFR0008153

Title: Finite impulse response utilizing the principles of superposition.
Creator: Carter, Scott Edward, Malocha, Donald C., Engineering
Abstract / Description: University of Central Florida College of Engineering Thesis; Window functions have been greatly utilized in the synthesis of finite impulse response (FIR) filters implemented using surface acoustic wave (SAW) devices. The critical parameter in any FIR design in the impulse response length, which must be optimized for the given design specifications in order to reduce the size of each device. To this end, many design algorithms have been introduced such as Remez exchange, linear programming,...
Show moreUniversity of Central Florida College of Engineering Thesis; Window functions have been greatly utilized in the synthesis of finite impulse response (FIR) filters implemented using surface acoustic wave (SAW) devices. The critical parameter in any FIR design in the impulse response length, which must be optimized for the given design specifications in order to reduce the size of each device. To this end, many design algorithms have been introduced such as Remez exchange, linear programming, and least mean squares. A new algorithm has been derived which is efficient and accurate for the design of arbitrary filter specifications requiring less computations than the current algorithms. The FIR design is applicaable to general SAW filter design and allows two weighted transducers to be designed in a near optimal method without the need to perform zero aplitting of de-convolution. The thesis first provides the definition of the window functions used for the design process. Then the overview of the design process is discussed using a flowchart of the modeling program for designing and FIR without tranducer separation and sample simulation is presented. Next, the effects of monotonically increasing sidelobes on the transition bandwidth are discussed. This is followed by a discussion of the addition of arbitary phase to the filter design requirements. Next, the separation of the response into a two transducer design utilizing the two window function series is explained. Finally, the results are discussed and compared with other design techniques.
Show less
Date Issued: 1995
Identifier: CFR0000186, ucf:52937
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFR0000186

Title: Finite impulse response filter design using cosine series functions.
Creator: Bishop, Carlton Delos, Malocha, Donald C., Engineering
Abstract / Description: Window functions have been extensively used for the design of SAW filters. The classical truncated cosine series functions, such as the Hamming and Blackmann functions, are only a few of an infinite set of such functions. The derivation of this set of functions from orthonormal basis sets and the criteria for obtaining the constant coefficients of the functions are presented. These functions are very useful because of the closed-form expressions and their easily recognizable Fourier transform...
Show moreWindow functions have been extensively used for the design of SAW filters. The classical truncated cosine series functions, such as the Hamming and Blackmann functions, are only a few of an infinite set of such functions. The derivation of this set of functions from orthonormal basis sets and the criteria for obtaining the constant coefficients of the functions are presented. These functions are very useful because of the closed-form expressions and their easily recognizable Fourier transform. Another approach to the design of Gaussian shaped filters having a desired sidelobe level using a 40 term cosine series will be presented as well. This approach is again non-iterative and a near equi-ripple sidelobe level filter could be achieved. A deconvolution technique will also be presented. this has the advantage of being non-iterative, simple and fast. This design method produces results comparable to the Dolph-Chebyshev technique.
Show less
Date Issued: 1988
Identifier: CFR0013088, ucf:53133
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFR0013088

Title: ULTRA-WIDEBAND ORTHOGONAL FREQUENCY CODED SAW CORRELATORS.
Creator: Gallagher, Daniel, Malocha, Donald, University of Central Florida
Abstract / Description: Ultra–wideband (UWB) communication new technology with ability to share the FCC allocated frequency spectrum, large channel capacity and data rate, simple transceiver architecture and high performance in noisy environments. Such communication advantages have paved the way for emerging wireless technologies such as wireless high definition video streaming, wireless sensor networks and more. This thesis examines orthogonal frequency coded surface acoustic wave (SAW) correlators for use in...
Show moreUltra–wideband (UWB) communication new technology with ability to share the FCC allocated frequency spectrum, large channel capacity and data rate, simple transceiver architecture and high performance in noisy environments. Such communication advantages have paved the way for emerging wireless technologies such as wireless high definition video streaming, wireless sensor networks and more. This thesis examines orthogonal frequency coded surface acoustic wave (SAW) correlators for use in advanced UWB communication systems. Orthogonal frequency coding (OFC) and pseudo-noise (PN) coding provides a means for UWB spreading of data. The use of OFC spectrally spreads a PN sequence beyond that of CDMA because of the increased bandwidth; allowing for improved correlation gain. The transceiver approach is still very similar to that of the CDMA approach but provides greater code diversity. Use of SAW correlators eliminates many of the costly components that are needed in the IF block in the transmitter and receiver, and reduces much of the signal processing requirements. The OFC SAW correlator device consists of a dispersive OFC transducer and a wideband output transducer. The dispersive filter was designed using seven contiguous chip frequencies within the transducer. Each chip is weighted in the transducer to account for the varying conductance of the chips and to compensate for the output transducer apodization. Experimental correlator results of an OFC SAW correlation filter are presented. The dispersive filter is designed using seven contiguous chip frequencies within the transducer. SAW correlators with fractional bandwidth of approximately 29% were fabricated on lithium niobate (LiNbO3) having a center frequency of 250 MHz and the filter has a processing gain of 49. A coupling of modes (COM) model is used to predict the experimental SAW filter response. Discussion of the filter design, analysis and measurements are presented. Results are shown for operation in a matched filter correlator for use in an UWB communication system and compared to predictions.
Show less
Date Issued: 2007
Identifier: CFE0001820, ucf:47338
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0001820

Title: NANOCLUSTER THIN-FILMS FOR SENSOR APPLICATIONS.
Creator: Serritella, Joseph, Malocha, Donald, University of Central Florida
Abstract / Description: The ability to sense gas such as methane can provide an early warning system to protect human lives. High demand for the ability to sense the world around us has provided an extensive area of research for sensor technology. In particular, current sensor technology, specifically for methane, has provided sensors that require a heated environment to function. The majority of current methane sensors function at temperatures between 150[degrees]C and 450[degrees]C . This thesis will explore an...
Show moreThe ability to sense gas such as methane can provide an early warning system to protect human lives. High demand for the ability to sense the world around us has provided an extensive area of research for sensor technology. In particular, current sensor technology, specifically for methane, has provided sensors that require a heated environment to function. The majority of current methane sensors function at temperatures between 150[degrees]C and 450[degrees]C . This thesis will explore an approach to produce a room temperature methane sensor. This research will investigate techniques to create a sensor that is responsive to methane at 23[degrees]C. The approach will use the integration of a very thin film, which changes its resistive properties when methane gas is applied, deposited atop the surface of a piezoelectric substrate. An aluminum thin film interdigital transducer will launch a surface acoustic wave (SAW) that travels under the sensor's gas-sensitive resistive thin film. The SAW/resistive film interaction changes the SAW amplitude, phase and delay. For this work, three films, tin dioxide (SnO2), zinc oxide (ZnO) and palladium (Pd) [1, 2] will be studied. Gas detection will be shown when combining ZnO and Pd, and, observable change in SAW propagation loss is measured when methane gas is present at the film.
Show less
Date Issued: 2015
Identifier: CFH0004832, ucf:45481
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFH0004832

Title: INVESTIGATION OF PN JUNCTION DELINEATION RESOLUTION USING ELECTRON BEAM INDUCED CURRENT.
Creator: Hontgas, Christopher, Malocha, Donald, University of Central Florida
Abstract / Description: This dissertation will investigate electron beam induced current (EBIC) for determining semiconductor material and device parameters. While previous experimental work on PN junction delineation using EBIC with the scanning electron microscope has resulted in resolution to approximately 10 nm, theoretical study shows the potential use of EBIC for higher resolution (nanometer) PN junction and FET channel length delineation using the transmission electron microscope. Theoretical arguments using...
Show moreThis dissertation will investigate electron beam induced current (EBIC) for determining semiconductor material and device parameters. While previous experimental work on PN junction delineation using EBIC with the scanning electron microscope has resulted in resolution to approximately 10 nm, theoretical study shows the potential use of EBIC for higher resolution (nanometer) PN junction and FET channel length delineation using the transmission electron microscope. Theoretical arguments using computer simulations of electron beam generation volume, collection probability and EBIC were performed and are presented for the purpose of determining EBIC use in a 300 keV transmission electron microscope (TEM) for PN junction depth determination. Measured results indicate that by measuring thin semiconductor samples with high surface recombination velocity and by using a narrow, high-energy electron beam in the STEM mode of a transmission electron microscope, nanometer resolution may be possible. The practical and experimental limits of beam energy and semiconducting material thermal damage will be discussed.
Show less
Date Issued: 2007
Identifier: CFE0001900, ucf:47494
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0001900

Title: SAW REFLECTIVE TRANSDUCERS AND ANTENNAS FOR ORTHOGONAL FREQUENCY CODED SAW SENSORS.
Creator: Santos, Bianca Maria, Malocha, Donald, University of Central Florida
Abstract / Description: Passive sensors that vary its impedance per measured parameter may be used with surface acoustic wave (SAW) reflective transducers (SRT) for wireless acquisition of the measurand. The device is composed of two transducers, where one, which may be attached to an antenna, is used to launch the wave within the device substrate, and the other is where the sensor load is attached to. The latter is able to reflect the incident wave. How much power is reflected is determined by the attached sensor...
Show morePassive sensors that vary its impedance per measured parameter may be used with surface acoustic wave (SAW) reflective transducers (SRT) for wireless acquisition of the measurand. The device is composed of two transducers, where one, which may be attached to an antenna, is used to launch the wave within the device substrate, and the other is where the sensor load is attached to. The latter is able to reflect the incident wave. How much power is reflected is determined by the attached sensor load. Amplitude variations as well as peak frequency variations of the SRT reflectivity response are explored in this thesis. SAW passive temperature sensors with an orthogonal frequency coded (OFC) time response were previously investigated and prove to be ideal for use in harsh environments. Each sensor is distinguishable from the other due to the OFC code embedded within its time response. However, this coding technique poses a difficulty in designing antennas for the sensor due to its inherently wide bandwidth, and capacitive, non-uniform input impedance. This work covers antenna design and testing for the 250MHz wireless temperature acquisition prototype with a 28% fractional bandwidth, and for the 912MHz system which has 10% fractional bandwidth. Apart from the tag, antennas for the transmitter and receiver were designed for 50 Ohm matching with the required bandwidth maintained. Wireless temperature acquisition runs for the 250MHz prototype were successfully performed and show good agreement with measurements made by a thermocouple. Since a transceiver for the 912MHz system is not complete, the performance of the antennas was gauged by observing the signal transmitted wirelessly by the SAW tag and by comparing this with the sensor time response measured directly by a vector network analyzer.
Show less
Date Issued: 2009
Identifier: CFE0002649, ucf:48199
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0002649

Title: DESIGN AND SIMULATION FOR ENCODED PN-OFC SAW SENSOR SYSTEMS.
Creator: Pavlina, John, Malocha, Donald, University of Central Florida
Abstract / Description: Surface acoustic wave (SAW) sensors provide versatility in that they can offer wireless, passive operation in numerous environments. Various SAW device embodiments may also be employed for retrieval of the sensed data. Single sensor systems typically use a single carrier frequency and a simple device embodiment since tagging is not required. However, it is necessary in a multi-sensor environment to both identify the sensor and retrieve the information. Overlapping sensor data signals in time...
Show moreSurface acoustic wave (SAW) sensors provide versatility in that they can offer wireless, passive operation in numerous environments. Various SAW device embodiments may also be employed for retrieval of the sensed data. Single sensor systems typically use a single carrier frequency and a simple device embodiment since tagging is not required. However, it is necessary in a multi-sensor environment to both identify the sensor and retrieve the information. Overlapping sensor data signals in time and frequency present problems when attempting to collect the sensed data at the receiver. This dissertation defines a system simulation environment exclusive to SAW sensors. The major parameters associated with a multi-device system include the transmitter, the channel, and the receiver characteristics. These characteristics are studied for implementation into the simulation environment. A coupling of modes (COM) model for SAW devices is utilized as an accurate software representation of the various SAW devices. Measured device results are presented and compared with COM model predictions to verify performance of devices and system. Several coding techniques to alleviate code collisions and detection errors were investigated and evaluated. These specialized techniques apply the use of time, frequency, and spatial diversity to the devices. Utilizing these multiple-access techniques a multi-device system is realized. An optimal system based on coding technique, frequency of operation, range, and related parameters is presented. Funding for much of this work was provided through STTR contracts from NASA Kennedy Space Center.
Show less
Date Issued: 2010
Identifier: CFE0003124, ucf:48630
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0003124

Title: SAW Correlator Temperature Compensation Using a Pulse Width Modulated Temperature Controller.
Creator: Betancourt, Daniel, Weeks, Arthur, Malocha, Donald, Richie, Samuel, Gong, Xun, University of Central Florida
Abstract / Description: A Surface Acoustic Wave (SAW) correlator built on a Lithium Niobate substrate is temperature compensated in order to maintain a constant center frequency. Frequency shifts as a result of temperature variations limit device performance. An Arduino(&)#174;-based PWM temperature controller is developed to read the device temperature from a resistance temperature detector located on the SAW wafer and to regulate its temperature to a specified setpoint by providing current to a heater which is co...
Show moreA Surface Acoustic Wave (SAW) correlator built on a Lithium Niobate substrate is temperature compensated in order to maintain a constant center frequency. Frequency shifts as a result of temperature variations limit device performance. An Arduino(&)#174;-based PWM temperature controller is developed to read the device temperature from a resistance temperature detector located on the SAW wafer and to regulate its temperature to a specified setpoint by providing current to a heater which is co-located with the temperature sensor on the SAW correlator substrate. The final temperature controller achieves frequency shifts of 0.013 MHz from room temperature with a worst-case PPM experienced over 30(&)deg;C of temperature variation of 0.48 PPM/(&)deg;C. Linear and non-linear plant models are developed successfully to predict the device's temperature based on any input setpoint. Although there are alternatives to limit temperature drift at different temperatures, this thesis presents a simple method that works on a standard Lithium Niobate substrate.
Show less
Date Issued: 2019
Identifier: CFE0007787, ucf:52331
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0007787

Title: Lateral Power MOSFETs Hardened Against Single Event Radiation Effects.
Creator: Shea, Patrick, Shen, Zheng, Yuan, Jiann-Shiun, Malocha, Donald, University of Central Florida
Abstract / Description: The underlying physical mechanisms of destructive single event effects (SEE) from heavy ion radiation have been widely studied in traditional vertical double-diffused power MOSFETs (VDMOS). Recently lateral double-diffused power MOSFETs (LDMOS), which inherently provide lower gate charge than VDMOS, have become an attractive option for MHz-frequency DC-DC converters in terrestrial power electronics applications. There are growing interests in extending the LDMOS concept into radiation-hard...
Show moreThe underlying physical mechanisms of destructive single event effects (SEE) from heavy ion radiation have been widely studied in traditional vertical double-diffused power MOSFETs (VDMOS). Recently lateral double-diffused power MOSFETs (LDMOS), which inherently provide lower gate charge than VDMOS, have become an attractive option for MHz-frequency DC-DC converters in terrestrial power electronics applications. There are growing interests in extending the LDMOS concept into radiation-hard space applications. Since the LDMOS has a device structure considerably different from VDMOS, the well studied single event burn-out (SEB) or single event gate rapture (SEGR) response of VDMOS cannot be simply assumed for LDMOS devices without further investigation. A few recent studies have begun to investigate ionizing radiation effects in LDMOS devices, however, these studies were mainly focused on displacement damage and total ionizing dose (TID) effects, with very limited data reported on the heavy ion SEE response of these devices. Furthermore, the breakdown voltage of the LDMOS devices in these studies was limited to less than 80 volts (mostly in the range of 20-30 volts), considerably below the voltage requirement for some space power applications. In this work, we numerically and experimentally investigate the physical insights of SEE in two different fabricated LDMOS devices designed by the author and intended for use in radiation hard applications. The first device is a 24 V Resurf LDMOS fabricated on P-type epitaxial silicon on a P+ silicon substrate. The second device is a much different 150 V SOI Resurf LDMOS fabricated on a 1.0 micron thick N-type silicon-on-insulator substrate with a 1.0 micron thick buried silicon dioxide layer on an N-type silicon handle wafer. Each device contains internal features, layout techniques, and process methods designed to improve single event and total ionizing dose radiation hardness. Technology computer aided design (TCAD) software was used to develop the transistor design and fabrication process of each device and also to simulate the device response to heavy ion radiation. Using these simulations in conjunction with experimentally gathered heavy ion radiation test data, we explain and illustrate the fundamental physical mechanisms by which destructive single event effects occur in these LDMOS devices. We also explore the design tradeoffs for making an LDMOS device resistant to destructive single event effects, both in terms of electrical performance and impact on other radiation hardness metrics.
Show less
Date Issued: 2011
Identifier: CFE0004165, ucf:49044
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0004165

Title: Injection-locked semiconductor lasers for realization of novel RF photonics components.
Creator: Hoghooghi, Nazanin, Delfyett, Peter, Likamwa, Patrick, Li, Guifang, Malocha, Donald, University of Central Florida
Abstract / Description: This dissertation details the work has been done on a novel resonant cavity linear interferometric modulator and a direct phase detector with channel filtering capability using injection-locked semiconductor lasers for applications in RF photonics. First, examples of optical systems whose performance can be greatly enhanced by using a linear intensity modulator are presented and existing linearized modulator designs are reviewed. The novel linear interferometric optical intensity modulator...
Show moreThis dissertation details the work has been done on a novel resonant cavity linear interferometric modulator and a direct phase detector with channel filtering capability using injection-locked semiconductor lasers for applications in RF photonics. First, examples of optical systems whose performance can be greatly enhanced by using a linear intensity modulator are presented and existing linearized modulator designs are reviewed. The novel linear interferometric optical intensity modulator based on an injection-locked laser as an arcsine phase modulator is introduced and followed by numerical simulations of the phase and amplitude response of an injection-locked semiconductor laser. The numerical model is then extended to study the effects of the injection ratio, nonlinear cavity response, depth of phase and amplitude modulation on the spur-free dynamic range of a semiconductor resonant cavity linear modulator. Experimental results of the performance of the linear modulator implemented with a multi-mode Fabry-Perot semiconductor laser as the resonant cavity are shown and compared with the theoretical model. The modulator performance using a vertical cavity surface emitting laser as the resonant cavity is investigated as well. Very low V? in the order of 1 mV, multi-gigahertz bandwidth (-10 dB bandwidth of 5 GHz) and a spur-free dynamic range of 120 dB.Hz2/3 were measured directly after the modulator. The performance of the modulator in an analog link is experimentally investigated and the results show no degradation of the modulator linearity after a 1 km of SMF.The focus of the work then shifts to applications of an injection-locked semiconductor laser as a direct phase detector and channel filter. This phase detection technique does not require a local oscillator. Experimental results showing the detection and channel filtering capability of an injection-locked semiconductor diode laser in a three channel system are shown. The detected electrical signal has a signal-to-noise ratio better than 60 dB/Hz. In chapter 4, the phase noise added by an injection-locked vertical cavity surface emitting laser is studied using a self-heterodyne technique. The results show the dependency of the added phase noise on the injection ratio and detuning frequency. The final chapter outlines the future works on the linear interferometric intensity modulator including integration of the modulator on a semiconductor chip and the design of the modulator for input pulsed light.
Show less
Date Issued: 2012
Identifier: CFE0004385, ucf:49368
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0004385

Title: Synchronous Communication System for SAW Sensors Interrogation.
Creator: Troshin, Maxim, Malocha, Donald, Jones, W, Gong, Xun, University of Central Florida
Abstract / Description: During past two decades a variety of SAW based wireless sensors were invented and research is still in progress. As different frequencies, varied bandwidths, coding techniques and constantly changing post processing algorithms are being implemented, there is a constant need for a universal and adjustable synchronous communication system able to interrogate new generations of SAW sensors. This thesis presents the design of a multiple FPGA based communication system with an operational...
Show moreDuring past two decades a variety of SAW based wireless sensors were invented and research is still in progress. As different frequencies, varied bandwidths, coding techniques and constantly changing post processing algorithms are being implemented, there is a constant need for a universal and adjustable synchronous communication system able to interrogate new generations of SAW sensors. This thesis presents the design of a multiple FPGA based communication system with an operational frequency range of 450MHz-2.2GHz capable of producing user programmed modulated signal. The synchronous receiver is designed to have interchangeable chip, replacement of which would allow adjustment of the receiver's bandwidth. Within this paper the performance of the system is only evaluated at 915MHz centered 20MHz bandwidth region. An OFC temperature sensor was interrogated. Post-processing algorithms, measurement results, and proposals for the future use of the system are presented. Detailed overview of the structure and performance of every functional block along with design considerations are analyzed. Previously designed Matlab based software was adapted for post processing of the received signal. New software with simplified GUI was designed for programming of the desired signal.
Show less
Date Issued: 2012
Identifier: CFE0004270, ucf:49543
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0004270

Title: Intrinsic Modulation Response Modeling and Analysis for Lithographic Vertical-Cavity Surface-Emitting Lasers.
Creator: Li, Mingxin, Deppe, Dennis, Fathpour, Sasan, Wu, Shintson, Malocha, Donald, University of Central Florida
Abstract / Description: Vertical-cavity surface-emitting lasers (VCSELs) have been greatly improved and successfully commercialized over the past few decades owing to their ability to provide both mode and current confinement that enables low energy consumption, high efficiency and high modulation speed. However, further improvement of oxide VCSELs is limited by the nature of the oxide aperture because of self-heating, internal strain and difficulties in precise size control. In this dissertation, VCSELs using...
Show moreVertical-cavity surface-emitting lasers (VCSELs) have been greatly improved and successfully commercialized over the past few decades owing to their ability to provide both mode and current confinement that enables low energy consumption, high efficiency and high modulation speed. However, further improvement of oxide VCSELs is limited by the nature of the oxide aperture because of self-heating, internal strain and difficulties in precise size control. In this dissertation, VCSELs using lithographic approach are demonstrated to overcome the limitations of oxide VCSELs, in which an intra-cavity phase shifting mesa is applied to define the device size and provide optical mode and electrical current confinement instead of an oxide aperture. A newly developed model of intrinsic modulation response is proposed and analyzed to focus on the thermal limit of the modulation speed of VCSELs. The results show that both the temperature dependent differential gain and stimulated emission rate impact laser speed and the stimulated emission rate dominates the speed limit. Thermal limits of modulation response are compared for oxide and lithographic VCSELs for various sizes. The results predict that the intrinsic modulation response can be significantly increased by using lithographic VCSELs due to low thermal resistance and reduced mode volume while maintaining high efficiency. The intrinsic bandwidth could exceed 100 GHz for a 2-?m-diameter lithographic VCSEL. Combined with low electrical parasitics, it is expected to produce over 100 Gb/s data rate from a single directly modulated laser. VCSELs designed for high speed are discussed and their characteristics are demonstrated.
Show less
Date Issued: 2016
Identifier: CFE0006346, ucf:51556
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0006346

Title: Injection-Locked Vertical Cavity Surface Emitting Lasers (VCSELs) for Optical Arbitrary Waveform Generation.
Creator: Bhooplapur, Sharad, Delfyett, Peter, Li, Guifang, Christodoulides, Demetrios, Malocha, Donald, University of Central Florida
Abstract / Description: Complex optical pulse shapes are typically generated from ultrashort laser pulses by manipulating the optical spectrum of the input pulses. This generates complex but periodic time-domain waveforms. Optical Arbitrary Waveform Generation (OAWG) builds on the techniques of ultrashort pulse?shaping, with the goal of making non?periodic, truly arbitrary optical waveforms. Some applications of OAWG are coherently controlling chemical reactions on a femtosecond time scale, improving the performance...
Show moreComplex optical pulse shapes are typically generated from ultrashort laser pulses by manipulating the optical spectrum of the input pulses. This generates complex but periodic time-domain waveforms. Optical Arbitrary Waveform Generation (OAWG) builds on the techniques of ultrashort pulse?shaping, with the goal of making non?periodic, truly arbitrary optical waveforms. Some applications of OAWG are coherently controlling chemical reactions on a femtosecond time scale, improving the performance of LADAR systems, high?capacity optical telecommunications and ultra wideband signals processing.In this work, an array of Vertical Cavity Surface Emitting Lasers (VCSELs) are used as modulators, by injection-locking each VCSEL to an individual combline from an optical frequency comb source. Injection-locking ensures that the VCSELs' emission is phase coherent with the input combline, and modulating its current modulates mainly the output optical phase. The multi-GHz modulation bandwidth of VCSELs updates the output optical pulse shape on a pulse-to-pulse time scale, which is an important step towards true OAWG. In comparison, it is about a million times faster than the liquid-crystal modulator arrays typically used for pulse shaping! Novel components and subsystems of Optical Arbitrary Waveform Generation (OAWG) are developed and demonstrated in this work. They include:1.Modulators An array of VCSELs is packaged and characterized for use as a modulator for rapid?update pulse?shaping at GHz rates. The amplitude and phase modulation characteristics of an injection?locked VCSEL are simultaneously measured at GHz modulation rates.2.Optical Frequency Comb SourcesAn actively mode?locked semiconductor laser was assembled, with a 12.5 GHz repetition rate, ~ 200 individually resolvable comblines directly out of the laser, and high frequency stability. In addition, optical frequency comb sources are generated by modulation of a single frequency laser.3.High-resolution optical spectral demultiplexersThe demultiplexers are implemented using bulk optics, and are used to spatially resolve individual optical comblines onto the modulator array. 4.Optical waveform measurement techniques Several techniques are used to measure generated waveforms, especially for spectral phase measurements, including multi-heterodyne phase retrieval. In addition, an architecture for discriminating between ultrashort encoded optical pulses with record high sensitivity is demonstrated.
Show less
Date Issued: 2014
Identifier: CFE0005466, ucf:50402
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0005466

Title: True linearized intensity modulation for photonic analog to digital conversion using an injection-locked mode-locked laser.
Creator: Sarailou, Edris, Delfyett, Peter, Likamwa, Patrick, Fathpour, Sasan, Malocha, Donald, University of Central Florida
Abstract / Description: A true linearized interferometric intensity modulator for pulsed light has been proposed and experimentally presented in this thesis. This has been achieved by introducing a mode-locked laser into one of the arms of a Mach-Zehnder interferometer and injection-locking it to the input light (which is pulsed and periodic). By modulating the injection-locked laser, and combining its output light with the light from the other arm of interferometer in quadrature, one can achieve true linearized...
Show moreA true linearized interferometric intensity modulator for pulsed light has been proposed and experimentally presented in this thesis. This has been achieved by introducing a mode-locked laser into one of the arms of a Mach-Zehnder interferometer and injection-locking it to the input light (which is pulsed and periodic). By modulating the injection-locked laser, and combining its output light with the light from the other arm of interferometer in quadrature, one can achieve true linearized intensity modulator. This linearity comes from the arcsine phase response of the injection-locked mode-locked laser (as suggested by steady-state solution of Adler's equation) when it is being modulated. Mode-locked lasers are fabricated using a novel AlGaInAs-InP material system. By using the BCB for planarization and minimizing the metal pad size and directly modulating the laser, we have achieved very effective fundamental hybrid mode-locking at the repetition rate of ~ 23 GHz. This laser also provided the short pulses of 860 fs and 280 fs timing jitter integrated from 1 Hz- 100 MHz.The linearized intensity modulator has been built by using two identical two-section mode-locked lasers with the same length, one as the slave laser in one of the arms of the Mach-Zehnder interferometer injection-locked to the other one as the master which is the input light to the modulator. A low V? of 8.5 mV is achieved from this modulator. Also the current of the gain section or the voltage of the saturable absorber section of the slave laser has been used to apply the modulation signal. A spur free dynamic range of 70 dB.Hz2/3 is achieved when modulating the modulator through the saturable absorber. Modulating the saturable absorber provides a reduced third-order intermodulation tone with respect to modulating the gain. This is simply because of the unwanted amplitude modulation created when modulating the gain section current.Finally an improved design is proposed and demonstrated to improve the modulator performance. This is achieved by introducing a third section to the laser. Using the impurity free vacancy disordering technique the photoluminescence peak of this section is blue-shifted selectively and therefore there would not be any absorption in that passive section. By applying the modulation signal to this passive section rather than applying it to the gain section or saturable absorber section, the amplitude and phase modulation could be decoupled. The experimental results have presented here and an almost six-fold reduction in V? and 5 dB improvement in spur free dynamic range have been achieved. The proposed and demonstrated configuration as an analog optical link has the potential to increase the performance and resolution of photonic analog-to-digital converters.
Show less
Date Issued: 2015
Identifier: CFE0005707, ucf:50118
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0005707

Title: Programmable Low Loss Orthogonal Frequency Coded Surface Acoustic Wave Correlator Filters.
Creator: Smith, Marshall, Malocha, Donald, Weeks, Arthur, Sundaram, Kalpathy, Richie, Samuel, Youngquist, Robert, University of Central Florida
Abstract / Description: Simultaneous Transmit and Receive (STAR) communication is being developed as a means of improving spectral efficiency in wireless communication systems. If the obstacle of self-interference can be sufficiently overcome, it is possible to double the spectral efficiency of an equivalent time or frequency division duplexed system. Spread spectrum techniques can reduce self-interference by using orthogonal or pseudo-orthogonal codes to encode the transmit signal and decode the receive signal...
Show moreSimultaneous Transmit and Receive (STAR) communication is being developed as a means of improving spectral efficiency in wireless communication systems. If the obstacle of self-interference can be sufficiently overcome, it is possible to double the spectral efficiency of an equivalent time or frequency division duplexed system. Spread spectrum techniques can reduce self-interference by using orthogonal or pseudo-orthogonal codes to encode the transmit signal and decode the receive signal.Hardware correlator filters are developed for use with STAR radio systems using orthogonal frequency coded (OFC) surface acoustic wave (SAW) devices. OFC is a type of spread spectrum communication that can be implemented using SAW transducers to create a correlator filter, also known as a matched filter. OFC allows code division multiple access and processing gain, similar to other spread spectrum techniques, but is more well-suited to low loss inline SAW design due to the use of multiple orthogonal carriers.The development of low loss fixed code OFC SAW correlator filters is documented, including design criteria and multiple approaches that progressively reduce insertion loss. Using the results from progressive designs and experiments, a pair of correlator filters with matched codes are presented with approximately 6 dB insertion loss at 950 MHz.A second development focusing on OFC SAW correlator filters with programmable codes using RF switches is also described. The programmable correlators use a fixed OFC code with programmable binary phase shift keying (BPSK), and demonstrate positive results. The programmable correlators presented require less than 1 mW of DC power.
Show less
Date Issued: 2018
Identifier: CFE0007768, ucf:52372
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0007768

Title: Surface Acoustic Wave (SAW) Cryogenic Liquid and Hydrogen Gas Sensors.
Creator: Fisher, Brian, Malocha, Donald, Gong, Xun, Likamwa, Patrick, Richie, Samuel, Youngquist, Robert, University of Central Florida
Abstract / Description: This research was born from NASA Kennedy Space Center's (KSC) need for passive, wireless and individually distinguishable cryogenic liquid and H2 gas sensors in various facilities. The risks of catastrophic accidents, associated with the storage and use of cryogenic fluids may be minimized by constant monitoring. Accidents involving the release of H2 gas or LH2 were responsible for 81% of total accidents in the aerospace industry. These problems may be mitigated by the implementation of a...
Show moreThis research was born from NASA Kennedy Space Center's (KSC) need for passive, wireless and individually distinguishable cryogenic liquid and H2 gas sensors in various facilities. The risks of catastrophic accidents, associated with the storage and use of cryogenic fluids may be minimized by constant monitoring. Accidents involving the release of H2 gas or LH2 were responsible for 81% of total accidents in the aerospace industry. These problems may be mitigated by the implementation of a passive (or low-power), wireless, gas detection system, which continuously monitors multiple nodes and reports temperature and H2 gas presence. Passive, wireless, cryogenic liquid level and hydrogen (H2) gas sensors were developed on a platform technology called Orthogonal Frequency Coded (OFC) surface acoustic wave (SAW) radio frequency identification (RFID) tag sensors. The OFC-SAW was shown to be mechanically resistant to failure due to thermal shock from repeated cycles between room to liquid nitrogen temperature. This suggests that these tags are ideal for integration into cryogenic Dewar environments for the purposes of cryogenic liquid level detection. Three OFC-SAW H2 gas sensors were simultaneously wirelessly interrogated while being exposed to various flow rates of H2 gas. Rapid H2 detection was achieved for flow rates as low as 1ccm of a 2% H2, 98% N2 mixture. A novel method and theory to extract the electrical and mechanical properties of a semiconducting and high conductivity thin-film using SAW amplitude and velocity dispersion measurements were also developed. The SAW device was shown to be a useful tool in analysis and characterization of ultrathin and thin films and physical phenomena such as gas adsorption and desorption mechanisms.?
Show less
Date Issued: 2012
Identifier: CFE0004536, ucf:49258
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0004536

Title: A Novel Nonlinear Mason Model and Nonlinear Distortion Characterization for Surface Acoustic Wave Duplexers.
Creator: Chen, Li, Wahid, Parveen, Malocha, Donald, Richie, Samuel, Briot, Jean-Bernard, University of Central Florida
Abstract / Description: Surface acoustic wave (SAW) technology has been in use for well over one century. In the last few decades, due to its low cost and high performance, this technology has been widely adopted in modern wireless communication systems, to build filtering devices at radio frequency (RF). SAW filters and duplexers can be virtually found inside every mobile handset. SAW devices are traditionally recognized as passive devices with high linear signal processing behavior. However, recent deployments of...
Show moreSurface acoustic wave (SAW) technology has been in use for well over one century. In the last few decades, due to its low cost and high performance, this technology has been widely adopted in modern wireless communication systems, to build filtering devices at radio frequency (RF). SAW filters and duplexers can be virtually found inside every mobile handset. SAW devices are traditionally recognized as passive devices with high linear signal processing behavior. However, recent deployments of third generation (3G) and fourth generation (4G) mobile networks require the handsets to handle an increasing number of frequency bands with more complex modulation /demodulation schemes and higher data rate for more subscribers. These requirements directly demand more stringent linearity specifications on the front end devices, including the SAW duplexers. In the past, SAW duplexer design was based on empirically obtained design rules to meet the linearity specifications. Lack of predictability and an understanding of the root cause of the nonlinearity have limited the potential applications of SAW duplexers. Therefore, research on the nonlinearity characterization and an accurate modeling of SAW nonlinearity for mobile device applications are very much needed.The Ph.D. work presented here primarily focuses on developing a general nonlinear model for SAW resonators/duplexers. Their nonlinear characteristics were investigated by measuring the harmonic and intermodulation distortions of resonators. A nonlinear Mason model is developed and the characterization results are integrated into SAW duplexer design flows to help to simulate the nonlinear effects accurately and improve the linearity performance of the products.In this dissertation, first, a novel nonlinear Mason equivalent circuit model including a third order nonlinear coefficient in the wave propagation is presented. Next, the nonlinear distortions of SAW resonators are analyzed by measuring large-signal harmonic and intermodulation spurious emission on resonators using a wafer probe station. The influence of the setups on the measurement reliability and reproducibility is discussed. Further, the nonlinear Mason model is validated by comparing its simulation results with harmonic and intermodulation measurements on SAW resonators and a WCDMA Band 5 duplexer. The Mason model developed and presented here is the first and only nonlinear physical model for SAW devices based on the equivalent circuit approach. By using this new model, good simulation measurement agreements are obtained on both harmonic and intermodulation distortions for SAW resonators and duplexers. These outcomes demonstrate the validity of the research on both the characterization and modeling of SAW devices. The result obtained confirms that the assumption of the representation of the 3rd order nonlinearity in the propagation by a single coefficient is valid.
Show less
Date Issued: 2013
Identifier: CFE0004967, ucf:49565
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0004967

Title: Performance optimization of lateral-mode thin-film piezoelectric-on-substrate resonant systems.
Creator: Fatemi, Hedy, Abdolvand, Reza, Sundaram, Kalpathy, Malocha, Donald, Gong, Xun, Cho, Hyoung Jin, University of Central Florida
Abstract / Description: The main focus of this dissertation is to characterize and improve the performance of thin-film piezoelectric-on-substrate (TPoS) lateral-mode resonators and filters. TPoS is a class of piezoelectric MEMS devices which benefits from the high coupling coefficient of the piezoelectric transduction mechanism while taking advantage of superior acoustic properties of a substrate. The use of lateral-mode TPoS designs allows for fabrication of dispersed-frequency filters on a single substrate, thus...
Show moreThe main focus of this dissertation is to characterize and improve the performance of thin-film piezoelectric-on-substrate (TPoS) lateral-mode resonators and filters. TPoS is a class of piezoelectric MEMS devices which benefits from the high coupling coefficient of the piezoelectric transduction mechanism while taking advantage of superior acoustic properties of a substrate. The use of lateral-mode TPoS designs allows for fabrication of dispersed-frequency filters on a single substrate, thus significantly reducing the size and manufacturing cost of devices. TPoS filters also offer a lower temperature coefficient of frequency, and better power handling capability compared to rival technologies all in a very small footprint.Design and fabrication process of the TPoS devices is discussed. Both silicon and diamond substrates are utilized for fabrication of TPoS devices and results are compared. Specifically, the superior acoustic properties of nanocrystalline diamond in scaling the frequency and energy density of the resonators is highlighted in comparison with silicon. The performance of TPoS devices in a variety of applications is reported. These applications include lateral-mode TPoS filters with record low IL values (as low as 2dB) and fractional bandwidth up to 1%, impedance transformers, very low phase noise oscillators, and passive wireless temperature sensors.
Show less
Date Issued: 2015
Identifier: CFE0005945, ucf:50805
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0005945

Title: Passive, Wireless SAW OFC Strain Sensor and Software Defined Radio Interrogator.
Creator: Humphries, James, Malocha, Donald, Richie, Samuel, Weeks, Arthur, Sundaram, Kalpathy, Saha, Haripada, University of Central Florida
Abstract / Description: Surface acoustic wave (SAW) devices have exhibited unique capabilities to meet the demands for many applications due to the inherent properties of SAW devices and piezoelectric materials. In particular, SAW devices have been adapted as sensors that can be configured to operate both passively and wirelessly. SAW sensors can be operated in harsh environmental extremes where typical sensor technologies are not able to operate. Because the sensors are passive, a radio transceiver is required to...
Show moreSurface acoustic wave (SAW) devices have exhibited unique capabilities to meet the demands for many applications due to the inherent properties of SAW devices and piezoelectric materials. In particular, SAW devices have been adapted as sensors that can be configured to operate both passively and wirelessly. SAW sensors can be operated in harsh environmental extremes where typical sensor technologies are not able to operate. Because the sensors are passive, a radio transceiver is required to interrogate the sensor and receive the reflected response that has been modulated by the SAW device. This dissertation presents the design of a passive, wireless SAW OFC strain sensor and software defined radio (SDR) interrogator.A SAW strain sensor has been designed and tested using orthogonal frequency coding (OFC) on YZ-LiNbO3. OFC for SAW devices has been previously developed at UCF and provides both frequency and time diversity in the RFID code as well as providing processing gain to improve the sensor SNR. Strain effects in SAW devices are discussed and two sensor embodiments are developed. The first embodiment is a cantilever structure and provides insight on how strain effects the SAW device. The second embodiment bonds the SAW die directly to a test structure to measure the strain on the structure. A commercial wired foil strain gage provides a performance comparison and shows that the wireless SAW sensor performs comparably. A commercial-off-the-shelf SDR platform has been employed as the SAW sensor interrogator. The Universal Software Radio Peripheral (USRP) is available in many embodiments and is capable of operation of to 6GHz and up to 160MHz of bandwidth. In particular, the USRP B200 is utilized as the RF transceiver platform. Custom FPGA modifications are discussed to fully utilize the USRP B200 bandwidth (56MHz) and synchronize the transmit and receive chains. External hardware has also been introduced to the B200 to improve RF performance, all of which are incorporated into a custom enclosure. Post-processing of the SAW sensor response is accomplished in Python using a matched filter correlator routine to extract sensor information. The system is demonstrated by interrogating wireless OFC SAW temperature and strain sensors at 915MHz.
Show less
Date Issued: 2016
Identifier: CFE0006329, ucf:51560
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0006329

SAW (6)	+ -
OFC (5)	+ -
Dissertations (3)	+ -
Engineering -- Dissertations (3)	+ -
UWB (3)	+ -

VCSEL (3)	+ -
orthogonal frequency coding (3)	+ -
Academic (2)	+ -
Academic -- Engineering (2)	+ -
BPSK (2)	+ -
RFID (2)	+ -
Sensors (2)	+ -
correlator (2)	+ -
software defined radio (2)	+ -
spread spectrum (2)	+ -
ultra wideband (2)	+ -
3rd harmonic GUDT (1)	+ -
3rd harmonic SPUDT (1)	+ -
AM-BPSK (1)	+ -
Academic -- Engineering -- FOFT (1)	+ -
Academic -- FOFT (1)	+ -
Acoustic (1)	+ -
CDMA (1)	+ -
Coding (1)	+ -
Diamond (1)	+ -
EBIC (1)	+ -
FPGA Control System (1)	+ -
Filter (1)	+ -
Infrared (1)	+ -
Interrogation System (1)	+ -

ETD Collection (25)	+ -
Honors Collection (1)	+ -

Malocha, Donald (23)	+ -
University of Central Florida (23)	+ -
Richie, Samuel (7)	+ -
Delfyett, Peter (6)	+ -
Weeks, Arthur (6)	+ -

Gong, Xun (5)	+ -
Sundaram, Kalpathy (5)	+ -
Youngquist, Robert (5)	+ -
Likamwa, Patrick (4)	+ -
Abdolvand, Reza (3)	+ -
Engineering (3)	+ -
Fathpour, Sasan (3)	+ -
Li, Guifang (3)	+ -
Malocha, Donald C. (3)	+ -
Carter, Scott Edward (2)	+ -
Cho, Hyoung Jin (2)	+ -
Gallagher, Daniel (2)	+ -
Yuan, Jiann-Shiun (2)	+ -
Abouraddy, Ayman (1)	+ -
Banaei, Seyed Esmaeil (1)	+ -
Betancourt, Daniel (1)	+ -
Bhooplapur, Sharad (1)	+ -
Bishop, Carlton Delos (1)	+ -
Briot, Jean-Bernard (1)	+ -
Chen, Li (1)	+ -
Christodoulides, Demetrios (1)	+ -
Davila-Rodriguez, Josue (1)	+ -
Deppe, Dennis (1)	+ -
Fatemi, Hedy (1)	+ -
Fisher, Brian (1)	+ -

Search In

Pages

Pages

Sort Results By:

Narrow results by:

Topical Subject

Collection

Type of Resource

Language

Creator

Format

Owner