Current Search:   Pent, Jared (x)

View All Items

  • CSV Spreadsheet
(1 - 2 of 2)
PRESSURE DROP AND ENDWALL HEAT TRANSFER EFFECTS OF POROUS TURBULATORS IN A RECTANGULAR CHANNEL
Title
PRESSURE DROP AND ENDWALL HEAT TRANSFER EFFECTS OF POROUS TURBULATORS IN A RECTANGULAR CHANNEL.
Creator
Pent, Jared, Kapat, Jay, University of Central Florida
Abstract / Description
This study examines the local and averaged endwall heat transfer effects of a staggered array of porous pin fins within a rectangular channel. The porous pin fins were made from aluminum and had a pore density of 10 pores per inch (PPI). The pressure drop through the channel was also determined for several flow rates and presented in terms of the friction factor. Local heat transfer coefficients on the endwall were measured using Thermochromic Liquid Crystal (TLC) sheets recorded with a...
Show moreThis study examines the local and averaged endwall heat transfer effects of a staggered array of porous pin fins within a rectangular channel. The porous pin fins were made from aluminum and had a pore density of 10 pores per inch (PPI). The pressure drop through the channel was also determined for several flow rates and presented in terms of the friction factor. Local heat transfer coefficients on the endwall were measured using Thermochromic Liquid Crystal (TLC) sheets recorded with a charge-coupled device (CCD) camera. Static and total pressure measurements were taken at the entrance and exit of the test section to determine the overall pressure drop through the channel and explain the heat transfer trends through the channel. Results are presented for Reynolds numbers between 25000 and 130000 and a blockage ratio (blocked channel area divided by open channel area) of 50%. All results were compared to the corresponding results obtained using solid pins. All experiments were carried out in a 150 mm by 500 mm channel with an X/D of 1.72, a Y/D of 2.0, and a Z/D of 1.72 for the porous pins. It was found that for the range of Reynold's numbers tested in this study, the porous pin array consistently resulted in a larger friction factor, and therefore greater losses than a geometrically similar array of solid pins. The friction factors for the solid pin array were between 9.5 and 10.5, similar to the results found in the literature. For the porous pins, however, the friction factors were significantly increased as the Reynold's number increased, reaching as high as 15.3 at the highest Reynold's number tested. The heat transfer enhancement for the porous pins was found to be between 150 and 170% while the solid pins resulted in a heat transfer enhancement between 190 and 230%.
Show less
Date Issued
2009
Identifier
CFE0002819, ucf:48085
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0002819
Combustion Instability Mechanism of a Reacting Jet in Cross Flow at Gas Turbine Operating Conditions
Title
Combustion Instability Mechanism of a Reacting Jet in Cross Flow at Gas Turbine Operating Conditions.
Creator
Pent, Jared, Kapat, Jayanta, Deng, Weiwei, Gordon, Ali, Vasu Sumathi, Subith, Martin, Scott, University of Central Florida
Abstract / Description
Modern gas turbine designs often include lean premixed combustion for its emissions benefits; however, this type of combustion process is susceptible to self-excited combustion instabilities that can lead to damaging heat loads and system vibrations. This study focuses on identifying a mechanism of combustion instability of a reacting jet in cross flow, a flow feature that is widely used in the design of gas turbine combustion systems. Experimental results from a related study are used to...
Show moreModern gas turbine designs often include lean premixed combustion for its emissions benefits; however, this type of combustion process is susceptible to self-excited combustion instabilities that can lead to damaging heat loads and system vibrations. This study focuses on identifying a mechanism of combustion instability of a reacting jet in cross flow, a flow feature that is widely used in the design of gas turbine combustion systems. Experimental results from a related study are used to validate and complement three numerical tools that are applied in this study (-) self-excited Large Eddy Simulations, 3D thermoacoustic modeling, and 1D instability modeling. Based on the experimental and numerical results, a mechanism was identified that included a contribution from the jet in cross flow impedance as well as an overall jet flame time lag. The jet impedance is simply a function of the acoustic properties of the geometry while the flame time lag can be separated into jet velocity, equivalence ratio, and strain fluctuations, depending on the operating conditions and setup. For the specific application investigated in this study, it was found that the jet velocity and equivalence ratio fluctuations are important, however, the effect of the strain fluctuations on the heat release are minimal due to the high operating pressure. A mathematical heat release model was derived based on the proposed mechanism and implemented into a 3D thermoacoustic tool as well as a 1D instability tool. A three-point stability trend observed in the experimental data was correctly captured by the 3D thermoacoustic tool using the derived heat release model. Stability maps were generated with the 1D instability tool to demonstrate regions of stable operation that can be achieved as a function of the proposed mechanism parameters. The relative effect of the reacting jet in cross flow on the two dominant unstable modes was correctly captured in the stability maps. While additional mechanisms for a reacting jet in cross flow are possible at differing flow conditions, the mechanism proposed in this study was shown to correctly replicate the stability trends observed in the experimental tests and provides a fundamental understanding that can be applied for combustion system design.
Show less
Date Issued
2014
Identifier
CFE0005687, ucf:50154
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0005687