Current Search:   Pethe, Shirish (x)

View All Items

  • CSV Spreadsheet
(1 - 1 of 1)
OPTIMIZATION OF PROCESS PARAMETERS FOR REDUCED THICKNESS CIGSES THIN FILM SOLAR CELLS
Title
OPTIMIZATION OF PROCESS PARAMETERS FOR REDUCED THICKNESS CIGSES THIN FILM SOLAR CELLS.
Creator
Pethe, Shirish, Dhere, Neelkanth, University of Central Florida
Abstract / Description
With the advent of the 21st century, one of the serious problems facing mankind is harmful effects of global warming. Add to that the ever increasing cost of fuel and the importance of development of clean energy resources as alternative to fossil fuel has becomes one of the prime and pressing challenges for modern science and technology in the 21st century. Recent studies have shown that energy related sources account for 50% of the total emission of carbon dioxide in the atmosphere. All...
Show moreWith the advent of the 21st century, one of the serious problems facing mankind is harmful effects of global warming. Add to that the ever increasing cost of fuel and the importance of development of clean energy resources as alternative to fossil fuel has becomes one of the prime and pressing challenges for modern science and technology in the 21st century. Recent studies have shown that energy related sources account for 50% of the total emission of carbon dioxide in the atmosphere. All research activities are focused on developing various technologies that are capable of converting sunlight into electricity with high efficiency and can be produced using a cost-effective process. One of such technologies is the CuIn1-xGaxSe2 (CIGS) and its alloys that can be produced using cost-effective techniques and also exhibit high photo-conversion efficiency. The work presented here discusses some of the fundamental issues related to high volume production of CIGS thin film solar cells. Three principal issues that have been addressed in this work are effect of reduction in absorber thickness on device performance, micrononuniformity involved with amount of sodium and its effect on device performance and lastly the effect of working distance on the properties of molybdenum back contact. An effort has been made to understand the effect of absorber thickness on PV parameters and optimize the process parameters accordingly. Very thin (<1 µm) absorber film were prepared by selenization using metallorganic selenium source in a conventional furnace and by RTP using Se vapor. Sulfurization was carried out using H2S gas. Devices with efficiencies reaching 9% were prepared for very thin (<1 µm) CIGS and CIGSeS thin films. It was shown through this work that the absorber thickness reduction of 64% results in the efficiency drop of only 32%. With further optimization of the reaction process of the absorber layer as well as the other layers higher efficiencies can be achieved. The effect of sodium on the device performance is experimentally verified in this work. To the best of our knowledge the detrimental effect of excess sodium has been verified by experimental data and effort has been made to correlate the variation in PV parameter to theoretical models of effect of sodium. It has been a regular practice to deposit thin barrier layer prior to molybdenum deposition to reduce the micrononuniformities caused due to nonuniform out diffusion of sodium from the soda lime glass. However, it was proven in this work that an optimally thick barrier layer is necessary to reduce the out diffusion of sodium to negligible quantities and thus reduce the micrononuniformities. Molybdenum back contact deposition is a bottleneck in high volume manufacturing due to the current state of art where multi layer molybdenum film needs to be deposited to achieve the required properties. In order to understand and solve this problem experiments were carried out. The effect of working distance (distance between the target and the substrate) on film properties was studied and is presented in this work. During the course of this work efforts were taken to carry out a systematic and detailed study of some of the fundamental issues related to CIGS technology and particular for high volume manufacturing of CIGS PV modules and lay a good foundation for further improvement of PV performance of CIGS thin film solar cells prepared by the two step process of selenization and sulfurization of sputtered metallic precursors.
Show less
Date Issued
2010
Identifier
CFE0003517, ucf:48940
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0003517