View All Items
(1 - 20 of 59)
Pages
- Title
- THE FABRICATION OF POLYMER-DERIVED SICN/SIBCN CERAMIC NANOSTRUCTURES AND INVESTIGATION OF THEIR STRUCTURE-PROPERTY RELATIONSHIP.
- Creator
-
Sarkar, Sourangsu, Zhai, Lei, University of Central Florida
- Abstract / Description
-
Polymer-derived Ceramics (PDCs) represent a unique class of high-temperature stable materials synthesized directly by the thermal decomposition of polymers. This research first focuses on the fabrication of high temperature stable siliconcarbonitride (SiCN) fibers by electrospinning for ceramic matrix composite (CMC) applications. Ceraset™ VL20, a commercially available liquid...
Show morePolymer-derived Ceramics (PDCs) represent a unique class of high-temperature stable materials synthesized directly by the thermal decomposition of polymers. This research first focuses on the fabrication of high temperature stable siliconcarbonitride (SiCN) fibers by electrospinning for ceramic matrix composite (CMC) applications. Ceraset™ VL20, a commercially available liquid cyclosilazane, was functionalized with aluminum sec-butoxide in order to be electrospinnable. The surface morphology of the electrospun fibers was investigated using the fibers produced from solvents. The electrospun fibers produced from the chloroform/N,N-dimethylformamide solutions had hierarchical structures that led to superhydrophobic surfaces. A ÂÂÂÂ"dry skinÂÂÂÂ" model was proposed to explain the formation of micro/- and nanostructures. The second objective of the research is to align the multiwalled carbon nanotubes (MWCNTs) in PDC fibers. For this purpose, a non-invasive approach to disperse carbon nanotubes in polyaluminasilazane chloroform solutions was developed using a conjugated block copolymer synthesized by ATRP. The effect of the polymer and CNT concentration on the fiber structure and morphology was also examined. Detailed characterization using SEM and TEM was performed to demonstrate the orientation of CNTs inside the ceramic fibers. Additionally, the electrical properties of the ceramic fibers were investigated. Finally, the structural evolution of polymer-derived amorphous siliconborocarbonitride (SiBCN) ceramics with pyrolysis temperatures was studied by solid-state NMR, Raman and EPR spectroscopy. Results suggested the presence of three major components: (i) hexagonal boron nitride (h-BN), (ii) turbostratic boron nitride (t-BN), and (iii) BN2C groups in the final ceramic. The pyrolysis at higher temperature generated boron nitride (BN3) with a simultaneous decomposition of BN2C groups. A thermodynamic model was proposed to quantitatively explain the conversion of BN2C groups into BN3 and ÂÂÂÂ"freeÂÂÂÂ" carbon. Such structure evolution is believed to be the reason that the crystallization of Si4.0B1.0 ceramics starts at 1500 °C, whereas Si2.0B1.0 ceramics is stable upto 1600 °C.
Show less - Date Issued
- 2010
- Identifier
- CFE0003446, ucf:48408
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0003446
- Title
- FABRICATION OF FUNCTIONAL NANOSTRUCTURES USING POLYELECTROLYTE NANOCOMPOSITES AND REDUCED GRAPHENE OXIDE ASSEMBLIES.
- Creator
-
Chunder, Anindarupa, Zhai, Lei, University of Central Florida
- Abstract / Description
-
A wide variety of nanomaterials ranging from polymer assemblies to organic and inorganic nanostructures (particles, wires, rods etc) have been actively pursued in recent years for various applications. The synthesis route of these nanomaterials had been driven through two fundamental approaches - ÂÂ'Top downÂÂ' and ÂÂ'Bottom upÂÂ'. The key aspect of their application remained in the ability to make the...
Show moreA wide variety of nanomaterials ranging from polymer assemblies to organic and inorganic nanostructures (particles, wires, rods etc) have been actively pursued in recent years for various applications. The synthesis route of these nanomaterials had been driven through two fundamental approaches - ÂÂ'Top downÂÂ' and ÂÂ'Bottom upÂÂ'. The key aspect of their application remained in the ability to make the nanomaterials suitable for targeted location by manipulating their structure and functionalizing with active target groups. Functional nanomaterials like polyelectrolyte based multilayered thin films, nanofibres and graphene based composite materials are highlighted in the current research. Multilayer thin films were fabricated by conventional dip coating and newly developed spray coating techniques. Spray coating technique has an advantage of being applied for large scale production as compared to the dip coating technique. Conformal hydrophobic/hydrophilic and superhydrophobic/hydrophilic thermal switchable surfaces were fabricated with multilayer films of poly(allylaminehydrochloride) (PAH) and silica nanoparticles by the dip coating technique, followed by the functionalization with thermosensitive polymer-poly(N-isopropylacrylamide)(PNIPAAM) and perfluorosilane. The thermally switchable superhydrophobic/ hydrophilic polymer patch was integrated in a microfluidic channel to act as a stop valve. At 70 degree centigrade, the valve was superhydrophobic and stopped the water flow (close status) while at room temperature, the patch became hydrophilic, and allowed the flow (open status). Spray-coated multilayered film of poly(allylaminehydrochloride) (PAH) and silica nanoparticles was fabricated on polycarbonate substrate as an anti-reflection (AR) coating. The adhesion between the substrate and the coating was enhanced by treating the polycarbonate surface with aminopropyltrimethoxylsilane (APTS) and sol-gel. The coating was finally made abrasion-resistant with a further sol-gel treatment on top of AR coating, which formed a hard thin scratch-resistant film on the coating. The resultant AR coating could reduce the reflection from 5 to 0.3% on plastic. Besides multilayered films, the fabrication of polyelectrolyte based electrospun nanofibers was also explored. Ultrathin nanofibers comprising 2-weak polyelectrolytes, poly(acrylic acid) (PAA) and poly(allylaminehydrochloride) (PAH) were fabricated using the electrospinning technique and methylene blue (MB) was used as a model drug to evaluate the potential application of the fibers for drug delivery. The release of MB was controlled in a nonbuffered medium by changing the pH of the solution. Temperature controlled release of MB was obtained by depositing temperature sensitive PAA/poly(N-isopropylacrylamide) (PNIPAAM) multilayers onto the fiber surfaces. The sustained release of MB in a phosphate buffered saline (PBS) solution was achieved by constructing perfluorosilane networks on the fiber surfaces as capping layers. The fiber was also loaded with a real life anti-depressant drug (2,3-tertbutyl-4-methoxyphenol) and fiber surface was made superhydrophobic. The drug loaded superhydrophobic nanofiber mat was immersed under water, phosphate buffer saline and surfactant solutions in three separated experiments. The rate of release of durg was monitored from the fiber surface as a result of wetting with different solutions. Time dependent wetting of the superhydrophobic surface and consequently the release of drug was studied with different concentrations of surfactant solutions. The results provided important information about the underwater superhydrophobicity and retention time of drug in the nanofibers. The nanostructured polymers like nanowires, nanoribbons and nanorods had several other applications too, based on their structure. Different self-assembled structures of semiconducting polymers showed improved properties based on their architectures. Poly(3-hexylthiophene) (P3HT) supramolecular structures were fabricated on P3HT-dispersed reduced graphene oxide (RGO) nanosheets. P3HT was used to disperse RGO in hot anisole/N, N-dimethylformamide solvents, and the polymer formed nanowires on RGO surfaces through a RGO induced crystallization process. The Raman spectroscopy confirmed the interaction between P3HT and RGO, which allowed the manipulation of the composite's electrical properties. Such a bottom-up approach provided interesting information about graphene-based composites and inspired to study the interaction between RGO and the molecular semiconductor-tetrasulphonate salt of copper phthalocyanine (TSCuPc) for nanometer-scale electronics. The reduction of graphene oxide in presence of TSCuPc produced a highly stabilized aqueous composite ink with monodispersed graphene sheets. To demonstrate the potential application of the donor (TSCuPc)–acceptor (graphene) composite, the RGO/TSCuPc suspension was successfully incorporated in a thin film device and the optoelectronic property was measured. The conductivity (dark current) of the composite film decreased compared to that of pure graphene due to the donor molecule incorporation, but the photoconductivity and photoresponsivity increased to an appreciable extent. The property of the composite film overall improved with thermal annealing and optimum loading of TSCuPc molecules.
Show less - Date Issued
- 2010
- Identifier
- CFE0003292, ucf:48509
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0003292
- Title
- SURFACTANT DRIVEN ASSEMBLY OF FREEZE-CASTED, POLYMER-DERIVED CERAMIC NANOPARTICLES ON GRAPEHENE OXIDE SHEETS FOR LITHIUM-ION BATTERY ANODES.
- Creator
-
Khater, Ali Zein, Tetard, Laurene, Zhai, Lei, University of Central Florida
- Abstract / Description
-
Traditional Lithium-Ion Batteries (LIBs) are a reliable and cost-efficient choice for energy storage. LIBs offer high energy density and low self-discharge. Recent developments in electric-based technologies push for replacing historically used Lead-Acid batteries with LIBs. However, LIBs do not yet meet the demands of modern technology. Silicon and graphene oxide (GO) have been identified as promising replacements to improve anode materials. Graphene oxide has a unique sheet-like structure...
Show moreTraditional Lithium-Ion Batteries (LIBs) are a reliable and cost-efficient choice for energy storage. LIBs offer high energy density and low self-discharge. Recent developments in electric-based technologies push for replacing historically used Lead-Acid batteries with LIBs. However, LIBs do not yet meet the demands of modern technology. Silicon and graphene oxide (GO) have been identified as promising replacements to improve anode materials. Graphene oxide has a unique sheet-like structure that provides a mechanically stable, light weight material for LIB anodes. Due to its structure, reduced graphene oxide (rGO) is efficiently conductive and resistive to environmental changes. On the other hand, silicon-based anode materials offer the highest theoretical energy density and a high Li-ion loading capacity of various elements [20]. Silicon-based anodes that have previously been studied demonstrated extreme volumetric expansion over long cycles due to lithiation. Polysiloxane may be an interesting alternative as it is a Si-based material that can retain the high Li-ion loading capacity of Si while lacking the unattractive volumetric expansions of Si. Polymer derived ceramic-decorated graphene oxide anodes have been suggested to increase loading capacity, thermal resistance, power density, and mechanical stability of LIBs. Coupled with mechanically stable graphene oxide, polymer derived ceramic nanoparticle decorated graphene oxide anodes are studied to establish their efficiencies under operating conditions.
Show less - Date Issued
- 2018
- Identifier
- CFH2000404, ucf:45765
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFH2000404
- Title
- Effects of Surfactant Concentrations on Perovskite Emitters Embedded in Polystyrene.
- Creator
-
Calkins, Eric, Dong, Yajie, Tetard, Laurene, Zhai, Lei, University of Central Florida
- Abstract / Description
-
With their simple fabrication, narrow light spectrum, and color tunability, a class of materials known as perovskites are emerging as promising candidates for light emission applications. These materials, when exposed to normal atmospheric conditions show significant degradation. Improved protection has been demonstrated by embedding perovskites in polymers. Furthermore, the addition of a surfactant into the precursor solution has been shown to increase stability and allow for color tuning by...
Show moreWith their simple fabrication, narrow light spectrum, and color tunability, a class of materials known as perovskites are emerging as promising candidates for light emission applications. These materials, when exposed to normal atmospheric conditions show significant degradation. Improved protection has been demonstrated by embedding perovskites in polymers. Furthermore, the addition of a surfactant into the precursor solution has been shown to increase stability and allow for color tuning by exploiting quantum confinement effects. However, the effects of surfactants typically used to stabilize perovskites in solution have not been explored in this polymer embedding strategy. Here we determine the physical and optical emission changes produced by modifying the concentration of octylamine, butylamine, and oleylamine in the perovskite precursor solution prior to embedding into a polystyrene substrate. Using optical emission spectroscopy, we measure emission spectra of perovskite nanocrystals embedded in the polymer. Changes in morphology and dispersion of the perovskite particles within the polymer are observed using UV illuminated optical microscopy. XRD data suggests increased crystallinity with the addition of short chain surfactant. Our measurements in emission show that the location of the emission peak and overall shape of the emission spectra change when longer chain surfactant is added while short chain surfactant reduces nanorod formation without a significant change in particle dispersion or emission. The work suggests that increased long chain surfactant concentration prohibits perovskite crystal growth within the polymer leading to increased optical transparency and quantum confinement effects observable through photo luminescent emission.
Show less - Date Issued
- 2017
- Identifier
- CFE0007119, ucf:51940
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0007119
- Title
- Fabrication of Polyelectrolyte Nanoparticles Through Hydrophobic Interaction.
- Creator
-
Catarata, Ruginn Porce, Zhai, Lei, Kang, Ellen, Huo, Qun, University of Central Florida
- Abstract / Description
-
Anticancer drugs like gemcitabine (GEM) are used to treat cancers such as, pancreatic ductal adenocarcinoma (PDAC). However, the use of free gemcitabine yields challenges including cytotoxicity to healthy cells and poor circulation time. By encapsulating GEM in nanoparticles these challenges can be overcome. In this study poly(acrylic acid) (PAA)-GEM nanoparticles are fabricated by coupling GEM onto PAA. The particle formation is driven by the hydrophobic interaction of GEM, which collects in...
Show moreAnticancer drugs like gemcitabine (GEM) are used to treat cancers such as, pancreatic ductal adenocarcinoma (PDAC). However, the use of free gemcitabine yields challenges including cytotoxicity to healthy cells and poor circulation time. By encapsulating GEM in nanoparticles these challenges can be overcome. In this study poly(acrylic acid) (PAA)-GEM nanoparticles are fabricated by coupling GEM onto PAA. The particle formation is driven by the hydrophobic interaction of GEM, which collects in the core of the nanoparticle, forming a PAA shell. The nanoparticles were optimized by studying the PAA/GEM ratio and pH during fabrication. Characteristics of the nanoparticles including size, morphology and surface charge were investigated using dynamic light scattering (DLS), transmission electron microscopy (TEM) and zeta potential measurements. Conditions such as ionic stability and pH stability were optimized to achieve high drug loading efficiency. Cell uptake and cytotoxicity studies were used to determine the efficiency of the nanoparticles as drug delivery vehicle.
Show less - Date Issued
- 2019
- Identifier
- CFE0007791, ucf:52364
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0007791
- Title
- Freestanding Holey Thin Films for Renewable Energy Storage.
- Creator
-
Marcus, Kyle, Yang, Yang, Zhai, Lei, Dong, Yajie, University of Central Florida
- Abstract / Description
-
The rapid advancement of portable and wearable technologies has challenged research to improve upon current renewable battery energy storage systems. By using nanotechnology, it is now possible to access more of the energy storage theoretical values that have been unattainable thus far. We have developed a method to create freestanding holey thin films through combinations of electrochemical and chemical vapor deposition (CVD) techniques to be used in renewable energy storage systems....
Show moreThe rapid advancement of portable and wearable technologies has challenged research to improve upon current renewable battery energy storage systems. By using nanotechnology, it is now possible to access more of the energy storage theoretical values that have been unattainable thus far. We have developed a method to create freestanding holey thin films through combinations of electrochemical and chemical vapor deposition (CVD) techniques to be used in renewable energy storage systems. Freestanding thin films promote excellent contact between the residual conductive framework and any functionalized active component specific to the designed material. Without requiring any other additives, the as-prepared freestanding thin films can be mechanically and chemically tuned to allow for use in a wide range of applications. Incorporation of micro- and nano-sized holey structures dramatically enhances the electrochemically active surface area, which is essential for facilitating appropriate reactions in conversion type energy storage systems. Combining the freestanding and holey components with an active layer effectively enhances conductivity and reduces the electron transfer distance at the electrode-electrolyte interface. Herein, two separately designed freestanding holey thin films were successfully used as cathode materials for lithium-sulfur battery (Li-S) and magnesium-ion battery (MIB) energy storage systems.
Show less - Date Issued
- 2017
- Identifier
- CFE0007127, ucf:52304
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0007127
- Title
- The effect of carbon nanotube/organic semiconductor interfacial area on the performance of organic transistors.
- Creator
-
Kang, Narae, Khondaker, Saiful, Leuenberger, Michael, Zhai, Lei, University of Central Florida
- Abstract / Description
-
Organic field-effect transistors (OFETs) have attracted tremendous attention due to their flexibility, transparency, easy processiblity and low cost of fabrication. High-performance OFETs are required for their potential applications in the organic electronic devices such as flexible display, integrated circuit, and radiofrequency identification tags. One of the major limiting factors in fabricating high-performance OFET is the large interfacial barrier between metal electrodes and OSC which...
Show moreOrganic field-effect transistors (OFETs) have attracted tremendous attention due to their flexibility, transparency, easy processiblity and low cost of fabrication. High-performance OFETs are required for their potential applications in the organic electronic devices such as flexible display, integrated circuit, and radiofrequency identification tags. One of the major limiting factors in fabricating high-performance OFET is the large interfacial barrier between metal electrodes and OSC which results in low charge injection from the metal electrodes to OSC. In order to overcome the challenge of low charge injection, carbon nanotubes (CNTs) have been suggested as a promising electrode material for organic electronic devices. In this dissertation, we study the effect of carbon nanotube (CNT) density in CNT electrodes on the performance of organic field effect transistor (OFETs). The devices were fabricated by thermal evaporation of pentacene on the Pd/single walled CNT (SWCNT) electrodes where SWCNTs of different density (0-30/um) were aligned on Pd using dielectrophoresis (DEP) and cut via oxygen plasma etching to keep the length of nanotube short compared to the channel length. From the electronic transport measurements of 40 devices, we show that the average saturation mobility of the devices increased from 0.02 for zero SWCNT to 0.06, 0.13 and 0.19 cm2/Vs for low (1-5 /(&)#181;m), medium (10-15 /(&)#181;m) and high (25-30 /(&)#181;m) SWCNT density in the electrodes, respectively. The increase is three, six and nine times for low, medium and high density SWCNTs in the electrode compared to the devices that did not contain any SWCNT. In addition, the current on-off ratio and on-current of the devices are increased up to 40 times and 20 times with increasing SWCNT density in the electrodes. Our study shows that although a few nanotubes in the electrode can improve the OFET device performance, significant improvement can be achieved by maximizing SWCNT/OSC interfacial area. The improved OFET performance can be explained due to a reduced barrier height of SWCNT/pentacene interface compared to metal/pentacene interface which provides more efficient charge injection pathways with increased SWCNT/pentacene interfacial area.
Show less - Date Issued
- 2012
- Identifier
- CFE0004558, ucf:49252
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0004558
- Title
- Enhancing CNT Composites with Raman Spectroscopy.
- Creator
-
Freihofer, Gregory, Raghavan, Seetha, Gou, Jihua, Zhai, Lei, University of Central Florida
- Abstract / Description
-
Carbon Nanotubes (CNTs) have been the subject of intense research for their potential to improve a variety of material properties when developed as nano-composites. This research aims to address the challenges that limit the ability to transfer the outstanding nano-scale properties of CNTs to bulk nano-composites through Raman characterization.These studies relate the vibrational modes to microstructural characterization of CNT composites including stress, interface behavior, and defects. The...
Show moreCarbon Nanotubes (CNTs) have been the subject of intense research for their potential to improve a variety of material properties when developed as nano-composites. This research aims to address the challenges that limit the ability to transfer the outstanding nano-scale properties of CNTs to bulk nano-composites through Raman characterization.These studies relate the vibrational modes to microstructural characterization of CNT composites including stress, interface behavior, and defects. The formulation of a new fitting procedure using the pseudo-Voigt function is presented and shown to minimizethe uncertainty of characteristics within the Raman G and D doublet. Methods for optimization of manufacturing processes using the Raman characterization are presentedfor selected applications in a polymer multiwalled nanotube (MWNT) composite andlaser-sintered ceramic-MWNT composite. In the first application, the evolution of theMWNT microstructure throughout a functionalization and processing of the polymer-MWNT composite was monitored using the G peak position and D/G intensity ratio.Processing parameters for laser sintering of the ceramic-MWNT composites were optimized by obtaining maximum downshift in stress sensitive G-band peak position, whilekeeping disorder sensitive D/G integrated intensity ratio to a minimum. Advanced Raman techniques, utilizing multiple wavelengths, were used to show that higher excitationenergies are less sensitive to double resonance Raman effects. This reduces their ininfluence and allows the microstructural strain in CNT composites to be probed more accurately. The use of these techniques could be applied to optimize any processing parameters in the manufacturing of CNT composites to achieve enhanced properties.
Show less - Date Issued
- 2011
- Identifier
- CFE0004110, ucf:49098
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0004110
- Title
- Investigation of Breakdown Power During Electrical Breakdown of Aligned Array of Carbon Nanotubes.
- Creator
-
Bhanu, Udai, Khondaker, Saiful, Leuenberger, Michael, Zhai, Lei, University of Central Florida
- Abstract / Description
-
Massively parallel arrays of single walled carbon nanotubes (SWNT) have attracted significant research interests because of their ability to (i) average out inhomogeneities of individual SWNTs, (ii) provide larger on currents, and (iii) reduce noise to provide higher cutoff frequency for radio frequency applications. However, the array contains both metallic and semiconducting SWNTs and the presence of metallic nanotube in an aligned array negatively affects the device properties. Therefore,...
Show moreMassively parallel arrays of single walled carbon nanotubes (SWNT) have attracted significant research interests because of their ability to (i) average out inhomogeneities of individual SWNTs, (ii) provide larger on currents, and (iii) reduce noise to provide higher cutoff frequency for radio frequency applications. However, the array contains both metallic and semiconducting SWNTs and the presence of metallic nanotube in an aligned array negatively affects the device properties. Therefore, it is essential to selectively remove metallic nanotubes to obtain better transistor properties. It was recently found that although such a selective removal can be effective for a low density array, it does not work in a high density array and lead to a correlated breakdown of the entire array giving rise to a nanofissure pattern.In order to obtain a deeper understanding of such a correlated SWNT breakdown, we studied the breakdown power in the successive electrical breakdown of both low ( (<) 2 /um) and high density ((>)10 /um) SWNT arrays. We show that the breakdown voltage in successive electrical breakdown increases for low density array while it decreases for high density arrays. The estimated power required for the breakdown remains constant for low density arrays while it decreases for high density arrays in successive electrical breakdowns. We also show that, while a simple model of parallel resistor network can explain the breakdown of low density array, it cannot explain the behavior for the high density array implying that the correlation between the closely spaced parallel nanotubes plays a big role in the successive breakdowns of the high density SWNTs.
Show less - Date Issued
- 2012
- Identifier
- CFE0004518, ucf:49292
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0004518
- Title
- Novel Nanostructures and Processes for Enhanced Catalysis of Composite Solid Propellants.
- Creator
-
Draper, Robert, Seal, Sudipta, Heinrich, Helge, Zhai, Lei, University of Central Florida
- Abstract / Description
-
The purpose of this study is to examine the burning behaviour of composite solid propellants (CSP)in the presence of nanoscale, heterogenous catalysts. The study targets the decomposition of am-monium perchlorate (AP) as a key component in the burning profile of these propellants, and seeksto identify parameters of AP decomposition reaction that can be affected by catalytic additives.The decomposition behavior of AP was studied in the presence of titanium dioxide nanoparticlesin varying...
Show moreThe purpose of this study is to examine the burning behaviour of composite solid propellants (CSP)in the presence of nanoscale, heterogenous catalysts. The study targets the decomposition of am-monium perchlorate (AP) as a key component in the burning profile of these propellants, and seeksto identify parameters of AP decomposition reaction that can be affected by catalytic additives.The decomposition behavior of AP was studied in the presence of titanium dioxide nanoparticlesin varying configurations, surface conditions, dopants, morphology, and synthesis parameters withthe AP crystals. The catalytic nanoparticles were found to enhance the decomposition rate of theammonium perchlorate, and promote an accelerated burning rate of CSP propellants containingthe additives. Furthermore, different configurations were shown to have varying degrees of effec-tiveness in promoting the decomposition behaviour.To study the effect of the catalyst's configuration in the bulk propellant, controlled dispersion con-ditions of the nanoparticle catalysts were created and studied using differential scanning calorime-try, as well as model propellant strand burning. The catalysts were shown to promote the greatestenthalpy of reaction, as well as the highest burn rate, when the AP crystals were recrystalizedaround the nanoparticle additives. This is in contrast to the lowest enthalpy condition, which cor-responded to catalysts being dispersed upon the AP crystal surface using bio-molecule templates.Additionally, a method of facile, visible light nanoparticle tracking was developed to study theeffect of mixing and settling parameters on the nano-catalysts. To accomplish this, the titaniananoparticles were doped with fluorescent europium molecules to track the dispersion of the cat-alysts in the propellant binder. This method was shown to succesfully allow for dispersion andagglomeration monitoring without affecting the catalytic effect of the TiO2 nanoparticles.
Show less - Date Issued
- 2013
- Identifier
- CFE0004991, ucf:49559
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0004991
- Title
- Nanoelectronic Devices using Carbon Nanotubes and Graphene Electrodes: Fabrication and Electronic Transport Investigations.
- Creator
-
Kang, Narae, Khondaker, Saiful, Leuenberger, Michael, Zhai, Lei, University of Central Florida
- Abstract / Description
-
Fabrication of high-performance electronic devices using the novel semiconductors is essential for developing future electronics which can be applicable in large-area, flexible and transparent displays, sensors and solar cells. One of the major bottlenecks in the fabrication of high-performance devices is a large interfacial barrier formation at metal/semiconductor interface originated from Schottky barrier and interfacial dipole barrier which causes inefficient charge injection at the...
Show moreFabrication of high-performance electronic devices using the novel semiconductors is essential for developing future electronics which can be applicable in large-area, flexible and transparent displays, sensors and solar cells. One of the major bottlenecks in the fabrication of high-performance devices is a large interfacial barrier formation at metal/semiconductor interface originated from Schottky barrier and interfacial dipole barrier which causes inefficient charge injection at the interface. Therefore, having a favorable contact at electrode/semiconductor is highly desirable for high-performance devices fabrication.In this dissertation, the fabrication of nanoelectronic devices and investigation of their transport properties using carbon nanotubes (CNTs) and graphene as electrode materials will be shown. I investigated two types of devices using (i) semiconducting CNTs, and (ii) organic semiconductors (OSC). In the first part of this thesis, I will demonstrate the fabrication of high-performance solution-processed highly enriched (99%) semiconducting CNT thin film transistors (s-CNT TFTs) using densely aligned arrays of metallic CNTs (m-CNTs) for source/drain electrodes. From the electronic transport measurements at room temperature, significant improvements of field-effect mobility, on-conductance, transconductance and current on/off ratio for m-CNT/s-CNT devices were found compared to control palladium (Pd contacted s-CNT devices. From the temperature dependent transport investigation, a lower Schottky barrier height for the m-CNT/s-CNT devices was found compared to the devices with control metal electrodes. The enhanced device performance can be attributed to the unique device geometry as well as strong ?- ? interaction at m-CNT/s-CNT interfaces. In addition, I also investigated s-CNT TFTs using reduced graphene oxide (RGO) electrodes.In the second part of my thesis, I will demonstrate high-performance organic field-effect transistors (OFETs) using different types of graphene electrodes. I show that the performance of OFETs with pentacene as OSC and RGO as electrode can be continuously improved by increasing the carbon sp2 fraction of RGO. The carbon sp2 fractions of RGO were varied by controlling the reduction time. When compared to control Pd electrodes, the mobility of the OFETs shows an improvement of ?200% for 61% sp2 fraction RGO, which further improves to ?500% for 80% RGO electrode. Similarly, I show that when the chemical vapor deposition (CVD) graphene film is used as electrodes in fabricating OFET, the better performance is observed in comparison to RGO electrodes. Our study suggests that, in addition to ?-? interaction at graphene/pentacene interface, the tunable electronic properties of graphene as electrode have a significant role in OFETs performance. For a fundamental understanding of the interface, we fabricated short-channel OFETs with sub-100nm channel length using graphene electrode. From the low temperature electronic transport measurements, a lower charge injection barrier was found compared to control metal electrode. The detailed investigations reported in this thesis clearly indicated that the use of CNT and graphene as electrodes can improve the performance of future nanoelectronic devices.
Show less - Date Issued
- 2015
- Identifier
- CFE0006039, ucf:50982
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0006039
- Title
- Parallel fabrication and transport properties of carbon nanotube single electron transistors.
- Creator
-
Islam, Muhammad, Khondaker, Saiful, Chow, Lee, Stolbov, Sergey, Zhai, Lei, University of Central Florida
- Abstract / Description
-
Single electron transistors (SET) have attracted significant attention as a potential building block for post CMOS nanoelectronic devices. However, lack of reproducible and parallel fabrication approach and room temperature operation are the two major bottlenecks for practical realization of SET based devices. In this thesis, I demonstrate large scale single electron transistors fabrication techniques using solution processed single wall carbon nanotubes (SWNTs) and studied their electron...
Show moreSingle electron transistors (SET) have attracted significant attention as a potential building block for post CMOS nanoelectronic devices. However, lack of reproducible and parallel fabrication approach and room temperature operation are the two major bottlenecks for practical realization of SET based devices. In this thesis, I demonstrate large scale single electron transistors fabrication techniques using solution processed single wall carbon nanotubes (SWNTs) and studied their electron transport properties. The approach is based on the assembly of individual SWNTs via dielectrophoresis (DEP) at the selected position of the circuit and formation of tunnel barriers on SWNT. Two different techniques: i) metal-SWNT Schottky contact, and ii) mechanical templating of SWNTs were used for tunnel barrier creation.Low temperature (4.2K) transport measurement of 100 nm long metal-SWNT Schottky contact devices show that 93% of the devices with contact resistance (RT) (>) 100 K? show SET behavior. Majority (90%) of the devices with 100 K? (<) RT (<) 1 M?, show periodic, well-de?ned Coulomb diamonds with a charging energy ~ 15 meV, represents single electron tunnelling through a single quantum dot (QD), defined by the top contact. For high RT ((>) 1M?), devices show multiple QDs behaviors, while QD was not formed for low RT ((<) 100 K?) devices. From the transport study of 50 SWNT devices, a total of 38 devices show SET behavior giving an yield of 76%. I also demonstrate room temperature operating SET by using mechanical template technique. In mechanical template method individual SWNT is placed on top of a Al/Al2O3 local gate which bends the SWNT at the edge and tunnel barriers are created. SET devices fabricated with a template width of ~20 nm shows room temperature operation with a charging energy of ~150 meV. I also discussed the detailed transport spectroscopy of the devices.
Show less - Date Issued
- 2015
- Identifier
- CFE0006037, ucf:50987
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0006037
- Title
- Evaporative Vapor Deposition for Depositing 2D Materials.
- Creator
-
Gleason, Kevin, Putnam, Shawn, Zhai, Lei, Deng, Weiwei, University of Central Florida
- Abstract / Description
-
The development of a new deposition technique called evaporative vapor deposition (EVD) is reported, allowing deposition and formation of atomically-thin, large area materials on arbitrary substrates. This work focuses on the highly popular monolayer material (-) graphene oxide (GO). A droplet of a GO solution is formed on a heated polymer substrate, and maintained at steady-state evaporation (all droplet parameters are held constant over time). The polymer substrate is laser patterned to...
Show moreThe development of a new deposition technique called evaporative vapor deposition (EVD) is reported, allowing deposition and formation of atomically-thin, large area materials on arbitrary substrates. This work focuses on the highly popular monolayer material (-) graphene oxide (GO). A droplet of a GO solution is formed on a heated polymer substrate, and maintained at steady-state evaporation (all droplet parameters are held constant over time). The polymer substrate is laser patterned to control the droplet's contact line dynamics and the droplet's contact angle is maintained using a computer controlled syringe pump. A room temperature silicon wafer is translated through the vapor field of the evaporating GO droplet using a computer controlled translation stage. Dropwise condensation formed on the silicon wafer is monitored using both optical and infrared cameras. The condensation rate is measured to be ~50pL/mm2?s (-) 500 pL/mm2?s and dependent on the substrate translation speed and height difference between the droplet's apex and substrate surface. Nano-sized GO flakes carried through the vapor phase are captured in the condensate, depositing on the translating wafer. Deposition rate is dependent on the stability of the solution and droplet condensate size. Characterization with Raman spectroscopy show expected shifts for graphene/graphite. The presented EVD technique is promising toward formation of large scale 2D materials with applications to developing new technologies.
Show less - Date Issued
- 2015
- Identifier
- CFE0006035, ucf:50969
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0006035
- Title
- Investigation of Optical and Electronic Properties of Au Decorated MoS2.
- Creator
-
Bhanu, Udai, Khondaker, Saiful, Leuenberger, Michael, Zhai, Lei, University of Central Florida
- Abstract / Description
-
Achieving tunability of two dimensional (2D) transition metal dichalcogenides (TMDs) functions calls for the introduction of hybrid 2D materials by means of localized interactions with zero dimensional (0D) materials. A metal-semiconductor interface, as in gold (Au) - molybdenum disulfide (MoS2), is of great interest from the standpoint of fundamental science as it constitutes an outstanding platform to investigate optical and electronic properties due to charge transfer. The applied aspects...
Show moreAchieving tunability of two dimensional (2D) transition metal dichalcogenides (TMDs) functions calls for the introduction of hybrid 2D materials by means of localized interactions with zero dimensional (0D) materials. A metal-semiconductor interface, as in gold (Au) - molybdenum disulfide (MoS2), is of great interest from the standpoint of fundamental science as it constitutes an outstanding platform to investigate optical and electronic properties due to charge transfer. The applied aspects of such systems introduce new options for electronics, photovoltaics, detectors, catalysis, and biosensing. Here in this dissertation, we study the charge transfer interaction between Au nanoparticals and MoS2 flakes and its effect on Photoluminescence and electronic transport properties. The MoS2 was mechanically exfoliated from bulk single crystal. Number of layers in the flake was identified with the help of AFM and Raman Spectra. Au was deposited by physical vapor deposition method (PVD) in multiple steps to decorate MoS2 flakes.We first study the photoluminescence of pristine and Au decorated MoS2 and shows that in the presence of Au, the photoluminescence of MoS2 quenches significantly. We infer that the PL quenching can be attributed to a change in the electronic structure of the MoS2-Au system. The difference in Fermi level of a of MoS2 and Au results in a 0.4 eV energy level offset, which causes a band bending in the MoS2-Au hybrid. Upon illumination, the electrons in the excited state of MoS2 transfer to Au, leaving a hole behind, thus cause p-doping in MoS2. As electrons from MoS2 are transferred to Au, they do not decay back to their initial ground state, leading to PL quenching in the hybrid system.ivTo study the effect of Au deposition on electronic properties of ultra-thin and multilayers MoS2 flakes, we have fabricated MoS2 FETs from (1) ultra-thin sample (2-4 MoS2 layers) and (2) multilayers samples (more than 20 layers). After each deposition of Au, we measured the electrical characteristics of FET at room temperature. We show that the threshold voltage shifts towards the positive gate voltage as we increase the thickness of Au. This shift in threshold voltage is indicative of p doping of the MoS2. We further show that the field effect mobility of MoS2 FET decrease with Au thickness. We have quantitatively estimated the charge transferring from MoS2 to Au.
Show less - Date Issued
- 2015
- Identifier
- CFE0006025, ucf:51013
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0006025
- Title
- Graphene Oxide Reinforcement in Plasma Sprayed Nickel-5%Aluminum Coatings.
- Creator
-
Ward, David, Seal, Sudipta, Vaidyanathan, Raj, Heinrich, Helge, Zhai, Lei, University of Central Florida
- Abstract / Description
-
Metallic plasma sprayed coatings are widely used in the aerospace industry for repair on worn engine components. However, the inherent defects in these coatings limit the variety of repairs and reduce the service life of the repaired parts. A potential solution to overcome this problem is to mix small amounts of inexpensive graphene oxide in the powder feedstock. The incredible strength to weight ratio of graphene oxide makes it a viable additive to improve mechanical properties of metallic...
Show moreMetallic plasma sprayed coatings are widely used in the aerospace industry for repair on worn engine components. However, the inherent defects in these coatings limit the variety of repairs and reduce the service life of the repaired parts. A potential solution to overcome this problem is to mix small amounts of inexpensive graphene oxide in the powder feedstock. The incredible strength to weight ratio of graphene oxide makes it a viable additive to improve mechanical properties of metallic plasma sprayed coatings. The powder system chosen for this research is Nickel-5Aluminum since it is a common coating for such repairs. The greatest challenge was retaining graphene oxide, which combusts at 400(&)deg;C, while melting the Nickel above 1450(&)deg;C using a high temperature plasma plume. Graphene oxide was successfully retained in the coatings using either of two configurations: (1) Injecting the graphene oxide powder via solution suspension separately from the metal powder, or (2) Installing a shroud on the front of the plasma gun and backfilling with Argon to inhibit combustion. The uniquely designed solution suspension configuration resulted in a higher deposition efficiency of graphene oxide while the inert shroud configuration had a more homogeneous distribution and retention of graphene oxide in the coatings. The best overall coating was achieved using the inert shroud configuration using a powder mixture containing 2% weight Edge Functionalized Graphene Oxide. Vickers microhardness increased 46% and tensile adhesion strength increased 26% over control samples. This is possible due to the mechanisms of dislocation strengthening and stress transfer previously reported in graphene oxide reinforced Aluminum composites formed by flake powder metallurgy. It was also observed that the energy released by the combustion of graphene oxide helps to uniformly melt the Nickel particles and improve the coating microstructure, allowing for more forgiving spray parameters. The methods developed and results attained in this research open opportunities for graphene oxide to be added as inexpensive reinforcements to other metallic compositions for widespread use in metal matrix composite manufacturing.
Show less - Date Issued
- 2014
- Identifier
- CFE0005901, ucf:50857
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0005901
- Title
- Fluorescence Lifetime Imaging and Spectroscopy Aided Tracking of ZnO and CdS:Mn/ZnS/ N-acetyl cysteine (NAC) Quantum Dots in Citrus Plants.
- Creator
-
Washington, Torus, Gesquiere, Andre, Rajaraman, Swaminathan, Zhai, Lei, University of Central Florida
- Abstract / Description
-
In this thesis, we present an efficacious way of tracking nanoparticle movement in plant tissue through the use of fluorescence lifetime imaging (FLIM) and spectroscopy as well as a review of nanoparticle uptake in plants and the proposed mechanisms governing them. Given the increasing number of nanomaterials in agriculture and society as a whole, proper imaging tools and proactive measures must be taken to track nanoparticle movement in plant tissues and create infrastructure and products to...
Show moreIn this thesis, we present an efficacious way of tracking nanoparticle movement in plant tissue through the use of fluorescence lifetime imaging (FLIM) and spectroscopy as well as a review of nanoparticle uptake in plants and the proposed mechanisms governing them. Given the increasing number of nanomaterials in agriculture and society as a whole, proper imaging tools and proactive measures must be taken to track nanoparticle movement in plant tissues and create infrastructure and products to keep things sustainable and safe. Herein we report a ZnO comparable nanoparticle(-) a CdS:Mn/ZnS/ N-acetyl cysteine (NAC) quantum dot(-) which boasts longer lifetimes and suitable fluorescent properties above ZnO to properly delineate from plant tissue fluorescence of chlorophyll and cinnamic acids. In addition to FLIM mapping, quantum dot localization in plant vascular tissue was clearly seen and confirmed via characteristic emission spectra and time correlated single photon counting decay curves (TCSPC). Most quantum dots were seen to reside in the xylem. Plant age and structure was seen to affect uptake. QD size likely restricted extensive translocation. Inhibitive effects of QDs were likely water and mechanical stress. We surmise that travel of the cadmium quantum dots up the leaf and branch plant tissues is likely most governed by diffusion as the quantum dots bound to the cell structures create a diffusion gradient which aids travel up the leaf.
Show less - Date Issued
- 2017
- Identifier
- CFE0006820, ucf:51772
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0006820
- Title
- computational study of traveling wave solutions and global stability of predator-prey models.
- Creator
-
Zhu, Yi, Qi, Yuanwei, Rollins, David, Shuai, Zhisheng, Zhai, Lei, University of Central Florida
- Abstract / Description
-
In this thesis, we study two types of reaction-diffusion systems which have direct applications in understanding wide range of phenomena in chemical reaction, biological pattern formation and theoretical ecology.The first part of this thesis is on propagating traveling waves in a class of reaction-diffusion systems which model isothermal autocatalytic chemical reactions as well as microbial growth and competition in a flow reactor. In the context of isothermal autocatalytic systems, two...
Show moreIn this thesis, we study two types of reaction-diffusion systems which have direct applications in understanding wide range of phenomena in chemical reaction, biological pattern formation and theoretical ecology.The first part of this thesis is on propagating traveling waves in a class of reaction-diffusion systems which model isothermal autocatalytic chemical reactions as well as microbial growth and competition in a flow reactor. In the context of isothermal autocatalytic systems, two different cases will bestudied. The first is autocatalytic chemical reaction of order $m$ without decay. The second is chemical reaction of order $m$ with a decay of order $l$, where $m$ and $l$ are positive integers and $m(>)l\ge1$. A typical system is $A + 2B \rightarrow3B$ and $B\rightarrow C$ involving three chemical species, a reactant A and an auto-catalyst B and C an inert chemical species.We use numerical computation to give more accurate estimates on minimum speed of traveling waves for autocatalytic reaction without decay, providing useful insight in the study of stability of traveling waves. For autocatalytic reaction of order $m = 2$ with linear decay $l = 1$, which hasa particular important role in biological pattern formation, it is shown numerically that there exist multiple traveling waves with 1, 2 and 3 peaks with certain choices of parameters.The second part of this thesis is on the global stability of diffusive predator-prey system of Leslie Type and Holling-Tanner Type in a bounded domain $\Omega\subset R^N$ with no-flux boundary condition. By using a new approach, we establish much improved global asymptotic stability of a unique positiveequilibrium solution. We also show the result can be extended to more general type of systems with heterogeneous environment and/or other kind of kinetic terms.
Show less - Date Issued
- 2016
- Identifier
- CFE0006519, ucf:51359
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0006519
- Title
- Tunable Effect of Metal Ions on Polyelectrolyte Mechanics.
- Creator
-
Diaz, Angie, Kang, Hyeran, Zhai, Lei, Tetard, Laurene, University of Central Florida
- Abstract / Description
-
Polyelectrolyte based hydrogel fibers can mimic extracellular matrix and have applications such as drug delivery and tissue scaffolding. Metal ions play a critical role in hydrogel fiber stability via electrostatic interactions, but knowledge of how they modulate mechanical properties of individual polyelectrolyte polymers is lacking. In this study, electrospun polyacrylic acid with chitosan is used as a model system to evaluate ferric ion effect on nanofiber mechanics. Using dark field...
Show morePolyelectrolyte based hydrogel fibers can mimic extracellular matrix and have applications such as drug delivery and tissue scaffolding. Metal ions play a critical role in hydrogel fiber stability via electrostatic interactions, but knowledge of how they modulate mechanical properties of individual polyelectrolyte polymers is lacking. In this study, electrospun polyacrylic acid with chitosan is used as a model system to evaluate ferric ion effect on nanofiber mechanics. Using dark field microscopy imaging and persistence length analysis, we demonstrate that ferric ions modulate the bending stiffness of nanofibers. Young's modulus of individual nanofibers is estimated at values of a few kilopascals, suggesting that electrospun nanofibers possibly exist in a hydrated state. Furthermore, Fourier Transform Infrared (FTIR) spectra indicate the effect of ferric ions on polyacrylic acid molecular bonds. Our results suggest that metal ions can regulate single nanofiber stiffness, thereby providing designs to fabricate hydrogels in a tunable fashion.
Show less - Date Issued
- 2018
- Identifier
- CFE0006993, ucf:51625
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0006993
- Title
- High Performance Three-Dimensional Display Based on Polymer-Stabilized Blue Phase Liquid Crystal.
- Creator
-
Liu, Yifan, Wu, Shintson, Kik, Pieter, Likamwa, Patrick, Zhai, Lei, University of Central Florida
- Abstract / Description
-
Autostereoscopic 2D/3D (two-dimension/three-dimension) switchable display has been attracting great interest in research and practical applications for several years. Among different autostereoscopic solutions, direction-multiplexed 3D displays based on microlens array or parallax barrier are viewed as the most promising candidates, due to their compatibility with conventional 2D display technologies. These 2D/3D switchable display system designs rely on fast switching display panels and...
Show moreAutostereoscopic 2D/3D (two-dimension/three-dimension) switchable display has been attracting great interest in research and practical applications for several years. Among different autostereoscopic solutions, direction-multiplexed 3D displays based on microlens array or parallax barrier are viewed as the most promising candidates, due to their compatibility with conventional 2D display technologies. These 2D/3D switchable display system designs rely on fast switching display panels and photonics devices, including adaptive focus microlens array and switchable slit array. Polymer-stabilized blue phase liquid crystal (PS-BPLC) material provides a possible solution to meet the aforementioned fast response time requirement. However, present display and photonic devices based on blue phase liquid crystals suffer from several drawbacks, such as low contrast ratio, relatively large hysteresis and short lifetime. In this dissertation, we investigate the material properties of PS-BPLC so as to improve the performance of PS-BPLC devices. Then we propose several PS-BPLC devices for the autostereoscopic 2D/3D switchable display system designs. In the first part we evaluate the optical rotatory power (ORP) of blue phase liquid crystal, which is proven to be the primary reason for causing the low contrast ratio of PS-BPLC display systems. Those material parameters affecting the ORP of PS-BPLC are investigated and an empirical equation is proposed to calculate the polarization rotation angle in a PS-BPLC cell. Then several optical compensation methods are proposed to compensate the impact of ORP and to improve the contrast ratio of a display system. The pros and cons of each solution are discussed accordingly. In the second part, we propose two adaptive focus microlens array structures and a high efficiency switchable slit array based on the PS-BPLC materials. By optimizing the design parameters, these devices can be applied to the 2D/3D switchable display systems. In the last section, we focus on another factor that affects the performance and lifetime of PS-BPLC devices and systems: the UV exposure condition. The impact of UV exposure wavelength, dosage, uniformity, and photo-initiator are investigated. We demonstrate that by optimizing the UV exposure condition, we can reduce the hysteresis of PS-BPLC and improve its long term stability.
Show less - Date Issued
- 2014
- Identifier
- CFE0005370, ucf:50466
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0005370
- Title
- Nano-Particles in Multi-Scale Composites and Ballistic Applications.
- Creator
-
Gibson, Jason, Gou, Jihua, Raghavan, Seetha, Bai, Yuanli, Zhai, Lei, University of Central Florida
- Abstract / Description
-
Carbon nanotubes, graphene and nano sized core shell rubber particles have all been extensively researched for their capability to improve mechanical properties of thermoset resins. However, there has been a lack of research on their evaluation for energy absorption in high velocity impact scenarios, and the fundamental mechanics of their failure mechanisms during highly dynamic stress transfer through the matrix. This fundamental research is essential for laying the foundation for...
Show moreCarbon nanotubes, graphene and nano sized core shell rubber particles have all been extensively researched for their capability to improve mechanical properties of thermoset resins. However, there has been a lack of research on their evaluation for energy absorption in high velocity impact scenarios, and the fundamental mechanics of their failure mechanisms during highly dynamic stress transfer through the matrix. This fundamental research is essential for laying the foundation for improvement in ballistic performance in composite armor. In hard armor applications, energy absorption is largely accomplished through delamination between plies of the composite laminate. This energy absorption is accomplished through two mechanisms. The first being the elongation of the fiber reinforcement contained in the resin matrix, and the second is the propagation of the crack in between the discreet fabric plies. This research aims to fundamentally study the energy absorption characteristics of various nano-particles as reinforcements in thermoset resin for high velocity impact applications. Multiple morphologies will be evaluated through use of platelet, tubular and spherical shaped nano-particles. Evaluations of the effect on stress transfer through the matrix due to the combination of nano sized and micro scale particles of milled fiber is conducted. Three different nano-particles are utilized, specifically, multi-walled carbon nanotubes, graphene, and core shell rubber particles. The difference in surface area, aspect ratio and molecular structure between the tube, platelet and spherical nano-particles causes energy absorption through different failure mechanisms. This changes the impact performance of composite panels enhanced with the nano-particle fillers. Composite panels made through the use of dispersing the various nano-particles in a non-contact planetary mixer, are evaluated through various dynamic and static testing, including unnotched cantilever beam impact, mixed mode fracture toughness, split-Hopkinson bar, and ballistic V50 testing.The unnotched cantilever beam testing showed that the addition of milled fiber degraded the impact resistance of the samples. Addition of graphene nano platelets unilaterally degraded impact resistance through the unnotched cantilever beam testing. 1.5% loading of MWCNT showed the greatest increase in impact resistance, with a 43% increase over baseline.Determining the critical load for mixed mode interlaminar shear testing can be difficult for composite panels that bend without breaking. An iterative technique of optimizing the coefficient of determination, R2, in linear regression is developed for objectively determining the point of non-linearity for critical load. This allows for a mathematical method of determination; thereby eliminating any subjective decision of choosing where the data becomes non-linear. The core shell rubber nano particles showed the greatest strain energy release rate with an exponential improvement over the baseline results.Synergistic effects between nano and micro sized particles in the resin matrix during transfer of the stress wave were created and evaluated. Loadings of 1% milled carbon fiber enhanced the V50 ballistic performance of both carbon nanotube and core shell rubber particles in the resin matrix. However, the addition of milled carbon fiber degrades the impact resistance of all nano-particle enhanced resin matrices. Therefore, benefits gained from the addition of micro-sized particles in combination with nano-sized particles, are only seen in high energy impact scenarios with micro second durations.Loadings of 1% core shell rubber particles and 1% milled carbon fiber have an improvement of 8% in V50 ballistic performance over the baseline epoxy sample for 44 mag single wad cutter gas check projectiles. Loadings of 1% multi-walled carbon nanotubes with 1% milled carbon fiber have an improvement of 7.3% in V50 ballistic performance over the baseline epoxy sample.The failure mechanism of the various nano-particle enhanced resin matrices during the ballistic event is discussed through the use of scanning electron microscope images and Raman spectroscopy of the panels after failure. The Raman spectroscopy data shows a Raman shift for the fibers that had an enhancement in the V50 performance through the use of nano-particles. The Raman band for Kevlar(&)#174; centered at 1,649 cm-1 stemming from the stretching of the C==O bond of the fiber shows to be more sensitive to the residual axial strain, while the Raman band centered at 1,611 cm-1 stemming from the C-C phenyl ring is minimally affected for the CSR enhanced panels due to the failure mechanism of the CSR particles during crack propagation.
Show less - Date Issued
- 2013
- Identifier
- CFE0004849, ucf:49714
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0004849
