View All Items
(21 - 30 of 30)
Pages
- Title
- Frequency Selective Detection of Infrared Radiation in Uncooled Optical Nano-Antenna Array.
- Creator
-
Modak, Sushrut, Chanda, Debashis, Schoenfeld, Winston, Fathpour, Sasan, University of Central Florida
- Abstract / Description
-
Mid-infrared (mid-IR) detection and imaging over atmospheric transparent 3-5 ?m and 8-12 ?m bands are increasingly becoming important for various space, defense and civilian applications. Various kinds of microbolometers offer uncooled detection of IR radiation. However, broadband absorption of microbolometers makes them less sensitive to spectrally resolved detection of infrared radiation and the fabrication is also very tedious involving multiple complex lithography steps. In this study, we...
Show moreMid-infrared (mid-IR) detection and imaging over atmospheric transparent 3-5 ?m and 8-12 ?m bands are increasingly becoming important for various space, defense and civilian applications. Various kinds of microbolometers offer uncooled detection of IR radiation. However, broadband absorption of microbolometers makes them less sensitive to spectrally resolved detection of infrared radiation and the fabrication is also very tedious involving multiple complex lithography steps. In this study, we designed an optical nano-antenna array based detector with narrow frequency band of operation. The structure consists of a two-element antenna array comprised of a perforated metallic hole array coupled with an underneath disk array which trap incident radiation as dipole currents. The energy is dissipated as electron plasma loss on the hole-disk system inducing close to ~100% absorption of the incident radiation. This near perfect absorption originates from simultaneous zero crossing of real component of permittivity and permeability due to the geometrical arrangement of the two antenna elements which nullifies overall charge and current distributions, prohibiting existence of any propagating electromagnetic modes at resonance. Moreover, the continuous perforated film allows probing of the induced (")micro-current(") plasma loss on each nano hole-disk pair via a weak bias current. Such optical antenna design enables flexible scaling of detector response over the entire mid-infrared regime by change in the antenna dimensions. Furthermore, the development of simple nanoimprint lithography based large area optical antenna array fabrication technique facilitates formation of low cost frequency selective infrared detectors.
Show less - Date Issued
- 2014
- Identifier
- CFE0005845, ucf:50932
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0005845
- Title
- Terahertz Emission from the Intrinsic Josephson Junctions of High-Symmetry Thermally-Managed Bi2Sr2CaCu2O8+d Annular Microstrip Antennas.
- Creator
-
Bonnough, Sheila, Klemm, Richard, Peale, Robert, Shivamoggi, Bhimsen, University of Central Florida
- Abstract / Description
-
The intrinsic Josephson junctions in the high transition temperature superconductor Bi2Sr2CaCu2O8+? (BSCCO) have shown great potential for oscillators emitting in the terahertz frequency. The radiation frequency satisfies the conditions for both the ac Josephson effect and for a mesa cavity resonance mode. The observed angular dependence of the emissions from some mesa imply that the ac Josephson effect plays the primary role in a dual source radiation mechanism. But the integrated emission...
Show moreThe intrinsic Josephson junctions in the high transition temperature superconductor Bi2Sr2CaCu2O8+? (BSCCO) have shown great potential for oscillators emitting in the terahertz frequency. The radiation frequency satisfies the conditions for both the ac Josephson effect and for a mesa cavity resonance mode. The observed angular dependence of the emissions from some mesa imply that the ac Josephson effect plays the primary role in a dual source radiation mechanism. But the integrated emission power had generally been significantly below the 1 mW level suitable for many applications. This output power can be enhanced by a suitable design of an array of suitably shaped mesas that are all within a wavelength of each other so that their combined output is coherent. One such tightly packed array consists of concentric annuli. Here we calculate the angularly independent modes of thin annular microstrip antennas, with the ratio of the inner to the outer radii varying from 0.1 to 0.9. We then calculate the angular distribution of the emission power arising from the annular cavity modes and from the uniform ac Josephson current source at the frequencies of the cavity modes. We also calculate the five leading wavefunctions with the lowest order angular dependence for those annuli.
Show less - Date Issued
- 2018
- Identifier
- CFE0007314, ucf:52137
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0007314
- Title
- Reconfigurable Reflectarray Antennas with Bandwidth Enhancement for High Gain, Beam-Steering Applications.
- Creator
-
Trampler, Michael, Gong, Xun, Wahid, Parveen, Jones, W Linwood, Chen, Kenle, Kuebler, Stephen, University of Central Florida
- Abstract / Description
-
Reconfigurable reflectarrays are a class of antennas that combine the advantages of traditional parabolic antennas and phased array antennas. Chapter 1 discusses the basic operational theory of reflectarrays and their design. A review of previous research and the current status is also presented. Furthermore the inherent advantages and disadvantages of the reflectarray topography are presented. In chapter 2, a BST-integrated reflectarray operating at Ka band is presented. Due to the...
Show moreReconfigurable reflectarrays are a class of antennas that combine the advantages of traditional parabolic antennas and phased array antennas. Chapter 1 discusses the basic operational theory of reflectarrays and their design. A review of previous research and the current status is also presented. Furthermore the inherent advantages and disadvantages of the reflectarray topography are presented. In chapter 2, a BST-integrated reflectarray operating at Ka band is presented. Due to the monolithic integration of the tuning element, this design is then extended to V band where a novel interdigital gap configuration is utilized. Finally to overcome loss and phase limitations of the single resonant design, a BST-integrated, dual-resonance unit cell operating at Ka band is designed. While the losses are still high, a 360(&)deg; phase range is demonstrated.In chapter 3, the operational theory of dual-resonant array elements is introduced utilizing Q theory. An equivalent circuit is developed and used to demonstrate design tradeoffs. Using this theory the design procedure of a varactor tuned dual-resonant unit cell operating at X-band is presented. Detailed analysis of the design is performed by full-wave simulations and verified via measurements. In chapter 4, the array performance of the dual-resonance unit cell is analyzed. The effects of varying angles of incidence on the array element are studied using Floquet simulations. The beam scanning, cross-polarization and bandwidth performance of a 7(&)#215;7 element reflectarray is analyzed using full-wave simulations and verified via measurements.In chapter 5 a loss analysis of the dual-resonant reflectarray element is performed. Major sources of loss are identified utilizing full-wave simulations before an equivalent circuit is utilized to optimize the loss performance while maintaining a full phase range and improved bandwidth performance. Finally the dual-resonance unit cell is modified to support two linear polarizations. Overall, the operational and design theory of dual resonant reflectarray unit cells using Q theory is developed. A valuable equivalent circuit is developed and used to aid in array element design as well as optimize the loss and bandwidth performance. The proposed theoretical models provide valuable physical insight through the use of Q theory to greatly aid in reflectarray design
Show less - Date Issued
- 2019
- Identifier
- CFE0007735, ucf:52457
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0007735
- Title
- DESIGN OF A WIDEBAND DUAL-POLARIZED CAVITY BACKED SLOT ANTENNA.
- Creator
-
Paryani, Rajesh, Wahid, Parveen F, University of Central Florida
- Abstract / Description
-
A new technique for designing wideband dual-polarized cavity-backed slot antennas is presented. The structure is in the form of a double-resonant, dual-polarized slot antenna backed by a shallow substrate integrated cavity with a depth of approximately one tenth the free space wavelength. The presence of the cavity behind the slot enhances the antennaÂÂ's directivity and reduces the possibility of surface wave propagation in the antenna substrate when the element is...
Show moreA new technique for designing wideband dual-polarized cavity-backed slot antennas is presented. The structure is in the form of a double-resonant, dual-polarized slot antenna backed by a shallow substrate integrated cavity with a depth of approximately one tenth the free space wavelength. The presence of the cavity behind the slot enhances the antennaÂÂ's directivity and reduces the possibility of surface wave propagation in the antenna substrate when the element is used in an array environment. Moreover, the dual-polarized nature of this radiating element may be exploited to synthesize any desired polarization (vertical, horizontal, RHCP, or LHCP). The double-resonant behavior observed in this substrate-integrated cavity-backed slot antenna (SICBSA) is utilized to enhance its bandwidth compared to a typical cavity-backed slot antenna. A prototype of the proposed antenna is fabricated and tested. Measurement results indicate that a bandwidth of 19%, an average gain of 5.3 dB, and a wideband differential isolation of 30 dB can be achieved using this technique. The principles of operation along with the measurement results of the fabricated prototype are presented and discussed in this dissertation. The SICBSA is investigated as a candidate for use as an array element. A uniform two element phased array is demonstrated to locate the main beam from boresight to thirty degrees. The potential effects of mutual coupling and surface wave propagation are considered and analyzed.
Show less - Date Issued
- 2010
- Identifier
- CFE0003066, ucf:48295
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0003066
- Title
- Integrated Microwave Resonator/Antenna Structures for Sensor and Filter Applications.
- Creator
-
Cheng, Haitao, Gong, Xun, Wahid, Parveen, Wu, Thomas, Kapoor, Vikram, An, Linan, University of Central Florida
- Abstract / Description
-
This dissertation presents design challenges and promising solutions for temperature and pressure sensors which are highly desirable for harsh-environment applications, such as turbine engines. To survive the harsh environment consisting of high temperatures above 1000oC, high pressures around 300 psi, and corrosive gases, the sensors are required to be robust both electrically and mechanically. In addition, wire connection of the sensors is a challenging packaging problem, which remains...
Show moreThis dissertation presents design challenges and promising solutions for temperature and pressure sensors which are highly desirable for harsh-environment applications, such as turbine engines. To survive the harsh environment consisting of high temperatures above 1000oC, high pressures around 300 psi, and corrosive gases, the sensors are required to be robust both electrically and mechanically. In addition, wire connection of the sensors is a challenging packaging problem, which remains unresolved as of today. In this dissertation, robust ceramic sensors are demonstrated for both high temperature and pressure measurements. Also, the wireless sensors are achieved based on microwave resonators.Two types of temperature sensors are realized using integrated resonator/antennas and reflective patches, respectively. Both types of the sensors utilize alumina substrate which has a temperature-dependent dielectric constant. The temperature in the harsh environment is wirelessly detected by measuring the resonant frequency of the microwave resonator, which is dependent on the substrate permittivity. The integrated resonator/antenna structure minimizes the sensor dimension by adopting a seamless design between the resonator sensor and antenna. This integration technique can be also used to achieve an antenna array integrated with cavity filters. Alternatively, the aforementioned reflective patch sensor works simultaneously as a resonator sensor and a radiation element. Due to its planar structure, the reflective patch sensor is easy for design and fabrication. Both temperature sensors are measured above 1000oC.A pressure sensor is also demonstrated for high-temperature applications. Pressure is detected via the change in resonant frequency of an evanescent-mode resonator which corresponds to cavity deformation under gas pressure. A compact sensor size is achieved with a post loading the cavity resonator and a low-profile antenna connecting to the sensor. Polymer-Derived-Ceramic (PDC) is developed and used for the sensor fabrication. The pressure sensor is characterized under various pressures at high temperatures up to 800oC. In addition, to facilitate sensor characterizations, a robust antenna is developed in order to wirelessly interrogate the sensors. This specially-developed antenna is able to survive a record-setting temperature of 1300oC.
Show less - Date Issued
- 2014
- Identifier
- CFE0005473, ucf:50335
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0005473
- Title
- RF Energy Harvesting for Implantable ICs with On-chip Antenna.
- Creator
-
Liu, Yu-chun, Yuan, Jiann-Shiun, Gong, Xun, Jones, W, University of Central Florida
- Abstract / Description
-
Nowadays, as aging population increasing yearly, the health care technologies for elder people who commonly have high blood pressure or Glaucoma issues have attracted much attention. In order to care of those people, implantable integrated circuits (ICs) in human body are the direct solution to have 24/7 days monitoring with real-time data for diagnosis by patients themselves or doctors. However, due to the small size requirement for the implanted ICs located in human organs, it's quite...
Show moreNowadays, as aging population increasing yearly, the health care technologies for elder people who commonly have high blood pressure or Glaucoma issues have attracted much attention. In order to care of those people, implantable integrated circuits (ICs) in human body are the direct solution to have 24/7 days monitoring with real-time data for diagnosis by patients themselves or doctors. However, due to the small size requirement for the implanted ICs located in human organs, it's quite challenging to integrate with transmitting and receiving antenna in a single chip, especially operating in 5.8-GHz ISM band. This research proposes a new idea to solve the issue of integrating an on-chip antenna with implanted ICs. By adding an additional dielectric substrate upon the layer of silicon oxide in CMOS technology, utilizing the metal-6, it can form an extremely compact 3D-structure on-chip antenna which is able to be placed in human eye, heart or even in a few mm-diameter vessels. The proposed 3D on-chip antenna is only 1(&)#215;1(&)#215;2.8 mm3 with -10 dB gain and 10% efficiency, which has capability to communicate at least within 5 cm distance. The entire implanted battery-less wireless system has also been developed in this research. A designed 30% efficiency Native NMOS rectifier could generate 1 V and 1 mA to supply the designed low power transmitter including voltage-controlled oscillator (VCO) and power amplifier (PA). The entire system performance is well evaluated by link budget analysis and the simulation result demonstrates the possibility and feasibility of future on-demand easy-to-design implantable SoC.
Show less - Date Issued
- 2014
- Identifier
- CFE0005202, ucf:50652
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0005202
- Title
- RESPONSE-CALIBRATION TECHNIQUES FOR ANTENNA-COUPLED INFRARED SENSORS.
- Creator
-
Krenz, Peter, Boreman, Glenn, University of Central Florida
- Abstract / Description
-
Infrared antennas are employed in sensing applications requiring specific spectral, polarization, and directional properties. Because of their inherently small dimensions, there is significant interaction, both thermal and electromagnetic, between the antenna, the antenna-coupled sensor, and the low-frequency readout structures necessary for signal extraction at the baseband modulation frequency. Validation of design models against measurements requires separation of these effects so that the...
Show moreInfrared antennas are employed in sensing applications requiring specific spectral, polarization, and directional properties. Because of their inherently small dimensions, there is significant interaction, both thermal and electromagnetic, between the antenna, the antenna-coupled sensor, and the low-frequency readout structures necessary for signal extraction at the baseband modulation frequency. Validation of design models against measurements requires separation of these effects so that the response of the antenna-coupled sensor alone can be measured in a calibrated manner. Such validations will allow confident extension of design techniques to more complex infrared-antenna configurations. Two general techniques are explored to accomplish this goal. The extraneous signal contributions can be measured separately with calibration structures closely co-located near the devices to be characterized. This approach is demonstrated in two specific embodiments, for removal of cross-polarization effects arising from lead lines in an antenna-coupled infrared dipole, and for removal of distributed thermal effects in an infrared phased-array antenna. The second calibration technique uses scanning near-field microscopy to experimentally determine the spatial dependence of the electric-field distributions on the signal-extraction structures, and to include these measured fields in the computational electromagnetic model of the overall device. This approach is demonstrated for infrared dipole antennas which are connected to coplanar strip lines. Specific situations with open-circuit and short-circuit impedances at the termination of the lines are investigated.
Show less - Date Issued
- 2010
- Identifier
- CFE0003177, ucf:48606
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0003177
- Title
- BST-Inspired Smart Flexible Electronics.
- Creator
-
Shen, Ya, Gong, Xun, Wahid, Parveen, Sundaram, Kalpathy, Coffey, Kevin, University of Central Florida
- Abstract / Description
-
The advances in modern communication systems have brought about devices with more functionality, better performance, smaller size, lighter weight and lower cost. Meanwhile, the requirement for newer devices has become more demanding than ever. Tunability and flexibility are both long-desired features. Tunable devices are 'smart' in the sense that they can adapt to the dynamic environment or varying user demand as well as correct the minor deviations due to manufacturing fluctuations,...
Show moreThe advances in modern communication systems have brought about devices with more functionality, better performance, smaller size, lighter weight and lower cost. Meanwhile, the requirement for newer devices has become more demanding than ever. Tunability and flexibility are both long-desired features. Tunable devices are 'smart' in the sense that they can adapt to the dynamic environment or varying user demand as well as correct the minor deviations due to manufacturing fluctuations, therefore making it possible to reduce system complexity and overall cost. It is also desired that electronics be flexible to provide conformability and portability.Previously, tunable devices on flexible substrates have been realized mainly by dicing and assembling. This approach is straightforward and easy to carry out. However, it will become a (")mission impossible(") when it comes to assembling a large amount of rigid devices on a flexible substrate. Moreover, the operating frequency is often limited by the parasitic effect of the interconnection between the diced device and the rest of the circuit on the flexible substrate. A recent effort utilized a strain-sharing Si/SiGe/Si nanomembrane to transfer a device onto a flexible substrate. This approach works very well for silicon based devices with small dimensions, such as transistors and varactor diodes. Large-scale fabrication capability is still under investigation.A new transfer technique is proposed and studied in this research. Tunable BST (Barium Strontium Titanate) IDCs (inter-digital capacitors) are first fabricated on a silicon substrate. The devices are then transferred onto a flexible LCP (liquid crystalline polymer) substrate using wafer bonding of the silicon substrate to the LCP substrate, followed by silicon etching. This approach allows for monolithic fabrication so that the transferred devices can operate in millimeter wave frequency. The tunability, capacitance, Q factor and equivalent circuit are studied. The simulated and measured performances are compared. BST capacitors on LCP substrates are also compared with those on sapphire substrates to prove that this transfer process does not impair the performance.A primary study of a reflectarray antenna unit cell is also conducted for loss and phase swing performance. The BST thin film layout and bias line positions are studied in order to reduce the total loss. Transferring a full-size BST-based reflectarray antenna onto an LCP substrate is the ultimate goal, and this work is ongoing at the University of Central Florida (UCF).HFSS is used to simulate the devices and to prove the concept. All of the devices are fabricated in the clean room at UCF. Probe station measurements and waveguide measurements are performed on the capacitors and reflectarray antenna unit cells respectively.This work is the first comprehensive demonstration of this novel transfer technique.
Show less - Date Issued
- 2012
- Identifier
- CFE0004439, ucf:49339
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0004439
- Title
- LIQUID CRYSTAL OPTICS FOR COMMUNICATIONS, SIGNAL PROCESSING AND 3-D MICROSCOPIC IMAGING.
- Creator
-
Khan, Sajjad, Riza, Nabeel, University of Central Florida
- Abstract / Description
-
This dissertation proposes, studies and experimentally demonstrates novel liquid crystal (LC) optics to solve challenging problems in RF and photonic signal processing, freespace and fiber optic communications and microscopic imaging. These include free-space optical scanners for military and optical wireless applications, variable fiber-optic attenuators for optical communications, photonic control techniques for phased array antennas and radar, and 3-D microscopic imaging. At the heart of...
Show moreThis dissertation proposes, studies and experimentally demonstrates novel liquid crystal (LC) optics to solve challenging problems in RF and photonic signal processing, freespace and fiber optic communications and microscopic imaging. These include free-space optical scanners for military and optical wireless applications, variable fiber-optic attenuators for optical communications, photonic control techniques for phased array antennas and radar, and 3-D microscopic imaging. At the heart of the applications demonstrated in this thesis are LC devices that are non-pixelated and can be controlled either electrically or optically. Instead of the typical pixel-by-pixel control as is custom in LC devices, the phase profile across the aperture of these novel LC devices is varied through the use of high impedance layers. Due to the presence of the high impedance layer, there forms a voltage gradient across the aperture of such a device which results in a phase gradient across the LC layer which in turn is accumulated by the optical beam traversing through this LC device. The geometry of the electrical contacts that are used to apply the external voltage will define the nature of the phase gradient present across the optical beam. In order to steer a laser beam in one angular dimension, straight line electrical contacts are used to form a one dimensional phase gradient while an annular electrical contact results in a circularly symmetric phase profile across the optical beam making it suitable for focusing the optical beam. The geometry of the electrical contacts alone is not sufficient to form the linear and the quadratic phase profiles that are required to either deflect or focus an optical beam. Clever use of the phase response of a typical nematic liquid crystal (NLC) is made such that the linear response region is used for the angular beam deflection while the high voltage quadratic response region is used for focusing the beam. Employing an NLC deflector, a device that uses the linear angular deflection, laser beam steering is demonstrated in two orthogonal dimensions whereas an NLC lens is used to address the third dimension to complete a three dimensional (3-D) scanner. Such an NLC deflector was then used in a variable optical attenuator (VOA), whereby a laser beam coupled between two identical single mode fibers (SMF) was mis-aligned away from the output fiber causing the intensity of the output coupled light to decrease as a function of the angular deflection. Since the angular deflection is electrically controlled, hence the VOA operation is fairly simple and repeatable. An extension of this VOA for wavelength tunable operation is also shown in this dissertation. A LC spatial light modulator (SLM) that uses a photo-sensitive high impedance electrode whose impedance can be varied by controlling the light intensity incident on it, is used in a control system for a phased array antenna. Phase is controlled on the Write side of the SLM by controlling the intensity of the Write laser beam which then is accessed by the Read beam from the opposite side of this reflective SLM. Thus the phase of the Read beam is varied by controlling the intensity of the Write beam. A variable fiber-optic delay line is demonstrated in the thesis which uses wavelength sensitive and wavelength insensitive optics to get both analog as well as digital delays. It uses a chirped fiber Bragg grating (FBG), and a 1xN optical switch to achieve multiple time delays. The switch can be implemented using the 3-D optical scanner mentioned earlier. A technique is presented for ultra-low loss laser communication that uses a combination of strong and weak thin lens optics. As opposed to conventional laser communication systems, the Gaussian laser beam is prevented from diverging at the receiving station by using a weak thin lens that places the transmitted beam waist mid-way between a symmetrical transmitter-receiver link design thus saving prime optical power. LC device technology forms an excellent basis to realize such a large aperture weak lens. Using a 1-D array of LC deflectors, a broadband optical add-drop filter (OADF) is proposed for dense wavelength division multiplexing (DWDM) applications. By binary control of the drive signal to the individual LC deflectors in the array, any optical channel can be selectively dropped and added. For demonstration purposes, microelectromechanical systems (MEMS) digital micromirrors have been used to implement the OADF. Several key systems issues such as insertion loss, polarization dependent loss, wavelength resolution and response time are analyzed in detail for comparison with the LC deflector approach. A no-moving-parts axial scanning confocal microscope (ASCM) system is designed and demonstrated using a combination of a large diameter LC lens and a classical microscope objective lens. By electrically controlling the 5 mm diameter LC lens, the 633 nm wavelength focal spot is moved continuously over a 48 ƒÝm range with measured 3-dB axial resolution of 3.1 ƒÝm using a 0.65 numerical aperture (NA) micro-objective lens. The ASCM is successfully used to image an Indium Phosphide twin square optical waveguide sample with a 10.2 ƒÝm waveguide pitch and 2.3 ƒÝm height and width. Using fine analog electrical control of the LC lens, a super-fine sub-wavelength axial resolution of 270 nm is demonstrated. The proposed ASCM can be useful in various precision three dimensional imaging and profiling applications.
Show less - Date Issued
- 2005
- Identifier
- CFE0000750, ucf:46596
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0000750
- Title
- Multi-transit echo suppression for passive wireless surface acoustic wave sensors using 3rd harmonic unidirectional transducers and Walsh-Hadamard-like reflectors.
- Creator
-
Rodriguez Cordoves, Luis, Malocha, Donald, Weeks, Arthur, Abdolvand, Reza, Moharam, Jim, Youngquist, Robert, University of Central Florida
- Abstract / Description
-
A passive wireless surface acoustic wave sensor of a delay-line type is composed of an antenna, a transducer that converts the EM signal into a surface acoustic wave, and a set of acoustic reflectors that reflect the incoming signal back out through the antenna. A cavity forms between the transducer and the reflectors, trapping energy and causing multiple unwanted echoes. The work in this dissertation aims to reduce the unwanted echoes so that only the main transit signal is left(-)the signal...
Show moreA passive wireless surface acoustic wave sensor of a delay-line type is composed of an antenna, a transducer that converts the EM signal into a surface acoustic wave, and a set of acoustic reflectors that reflect the incoming signal back out through the antenna. A cavity forms between the transducer and the reflectors, trapping energy and causing multiple unwanted echoes. The work in this dissertation aims to reduce the unwanted echoes so that only the main transit signal is left(-)the signal of interest with sensor information.The contributions of this dissertation include reflective delay-line device response in the form of an infinite impulse response (IIR) filter. This may be used in the future to subtract out unwanted echoes via post-processing. However, this dissertation will use a physical approach to echo suppression by using a unidirectional transducer. Thus a unidirectional transducer is used and also optimized for 3rd harmonic operation. Both the directionality and the coupling of the 3rd harmonic optimized SPUDT are improved over a standard electrode width controlled (EWC) SPUDT. New type of reflectors for the reflective delay-line device are also presented. These use BPSK type coding, similar to that of the Walsh-Hadamard codes. Two types are presented, variable reflectivity and variable chip-lengths. The COM model is used to simulate devices and compare the predicted echo suppression level to that of fabricated devices. Finally, a device is mounted on a tunable antenna and the echo is suppressed on a wireless operating device.
Show less - Date Issued
- 2017
- Identifier
- CFE0006912, ucf:51697
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0006912
