View All Items
(41 - 60 of 203)
Pages
- Title
- RESOURCE ALLOCATION SCHEMES AND PERFORMANCE EVALUATION MODELS FOR WAVELENGTH DIVISION MULTIPLEXED OPTICAL NETWORKS.
- Creator
-
El Houmaidi, Mounire, Bassiouni, Mostafa, University of Central Florida
- Abstract / Description
-
Wavelength division multiplexed (WDM) optical networks are rapidly becoming the technology of choice in network infrastructure and next-generation Internet architectures. WDM networks have the potential to provide unprecedented bandwidth, reduce processing cost, achieve protocol transparency, and enable efficient failure handling. This dissertation addresses the important issues of improving the performance and enhancing the reliability of WDM networks as well as modeling and evaluating the...
Show moreWavelength division multiplexed (WDM) optical networks are rapidly becoming the technology of choice in network infrastructure and next-generation Internet architectures. WDM networks have the potential to provide unprecedented bandwidth, reduce processing cost, achieve protocol transparency, and enable efficient failure handling. This dissertation addresses the important issues of improving the performance and enhancing the reliability of WDM networks as well as modeling and evaluating the performance of these networks. Optical wavelength conversion is one of the emerging WDM enabling technologies that can significantly improve bandwidth utilization in optical networks. A new approach for the sparse placement of full wavelength converters based on the concept of the k-Dominating Set (k-DS) of a graph is presented. The k-DS approach is also extended to the case of limited conversion capability using three scalable and cost-effective switch designs: flexible node-sharing, strict node-sharing and static mapping. Compared to full search algorithms previously proposed in the literature, the K-DS approach has better blocking performance, has better time complexity and avoids the local minimum problem. The performance benefit of the K-DS approach is demonstrated by extensive simulation. Fiber delay line (FDL) is another emerging WDM technology that can be used to obtain limited optical buffering capability. A placement algorithm, k-WDS, for the sparse placement of FDLs at a set of selected nodes in Optical Burst Switching (OBS) networks is proposed. The algorithm can handle both uniform and non-uniform traffic patterns. Extensive performance tests have shown that k-WDS provides more efficient placement of optical fiber delay lines than the well-known approach of placing the resources at nodes with the highest experienced burst loss. Performance results that compare the benefit of using FDLs versus using optical wavelength converters (OWCs) are presented. A new algorithm, A-WDS, for the placement of an arbitrary numbers of FDLs and OWCs is introduced and is evaluated under different non-uniform traffic loads. This dissertation also introduces a new cost-effective optical switch design using FDL and a QoS-enhanced JET (just enough time) protocol suitable for optical burst switched WDM networks. The enhanced JET protocol allows classes of traffic to benefit from FDLs and OWCs while minimizing the end-to-end delay for high priority bursts. Performance evaluation models of WDM networks represent an important research area that has received increased attention. A new analytical model that captures link dependencies in all-optical WDM networks under uniform traffic is presented. The model enables the estimation of connection blocking probabilities more accurately than previously possible. The basic formula of the dependency between two links in this model reflects their degree of adjacency, the degree of connectivity of the nodes composing them and their carried traffic. The usefulness of the model is illustrated by applying it to the sparse wavelength converters placement problem in WDM networks. A lightpath containing converters is divided into smaller sub-paths such that each sub-path is a wavelength continuous path and the nodes shared between these sub-paths are full wavelength conversion capable. The blocking probability of the entire path is obtained by computing the blocking probabilities of the individual sub-paths. The analytical-based sparse placement algorithm is validated by comparing it with its simulation-based counterpart using a number of network topologies. Rapid recovery from failure and high levels of reliability are extremely important in WDM networks. A new Fault Tolerant Path Protection scheme, FTPP, for WDM mesh networks based on the alarming state of network nodes and links is introduced. The results of extensive simulation tests show that FTPP outperforms known path protection schemes in terms of loss of service ratio and network throughput. The simulation tests used a wide range of values for the load intensity, the failure arrival rate and the failure holding time. The FTPP scheme is next extended to the differentiated services model and its connection blocking performance is evaluated. Finally, a QoS-enhanced FTPP (QEFTPP) routing and path protection scheme in WDM networks is presented. QEFTPP uses preemption to minimize the connection blocking percentage for high priority traffic. Extensive simulation results have shown that QEFTPP achieves a clear QoS differentiation among the traffic classes and provides a good overall network performance.
Show less - Date Issued
- 2005
- Identifier
- CFE0000346, ucf:46291
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0000346
- Title
- OPTICAL SOLITONS IN PERIODIC STRUCTURES.
- Creator
-
Makris, Konstantinos, Christodoulides, Demetrios, University of Central Florida
- Abstract / Description
-
By nature discrete solitons represent self-trapped wavepackets in nonlinear periodic structures and result from the interplay between lattice diffraction (or dispersion) and material nonlinearity. In optics, this class of self-localized states has been successfully observed in both one-and two-dimensional nonlinear waveguide arrays. In recent years such lattice structures have been implemented or induced in a variety of material systems including those with cubic (Kerr), quadratic,...
Show moreBy nature discrete solitons represent self-trapped wavepackets in nonlinear periodic structures and result from the interplay between lattice diffraction (or dispersion) and material nonlinearity. In optics, this class of self-localized states has been successfully observed in both one-and two-dimensional nonlinear waveguide arrays. In recent years such lattice structures have been implemented or induced in a variety of material systems including those with cubic (Kerr), quadratic, photorefractive, and liquid-crystal nonlinearities. In all cases the underlying periodicity or discreteness leads to new families of optical solitons that have no counterpart whatsoever in continuous systems. In the first part of this dissertation, a theoretical investigation of linear and nonlinear optical wave propagation in semi-infinite waveguide arrays is presented. In particular, the properties and the stability of surface solitons at the edge of Kerr (AlGaAs) and quadratic (LiNbO3) lattices are examined. Hetero-structures of two dissimilar semi-infinite arrays are also considered. The existence of hybrid solitons in these latter types of structures is demonstrated. Rabi-type optical transitions in z-modulated waveguide arrays are theoretically demonstrated. The corresponding coupled mode equations, that govern the energy oscillations between two different transmission bands, are derived. The results are compared with direct beam propagation simulations and are found to be in excellent agreement with coupled mode theory formulations. In the second part of this thesis, the concept of parity-time-symmetry is introduced in the context of optics. More specifically, periodic potentials associated with PT-symmetric Hamiltonians are numerically explored. These new optical structures are found to exhibit surprising characteristics. These include the possibility of abrupt phase transitions, band merging, non-orthogonality, non-reciprocity, double refraction, secondary emissions, as well as power oscillations. Even though gain/loss is present in this class of periodic potentials, the propagation eigenvalues are entirely real. This is a direct outcome of the PT-symmetry. Finally, discrete solitons in PT-symmetric optical lattices are examined in detail.
Show less - Date Issued
- 2008
- Identifier
- CFE0002013, ucf:47610
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0002013
- Title
- POLARIMETRIC CHARACTERIZATION OF RANDOM ELECTROMAGNETIC BEAMS AND APPLICATIONS.
- Creator
-
Mujat, Mircea, Dogariu, Aristide, University of Central Florida
- Abstract / Description
-
The polarimetric properties of random electromagnetic beams provide new means for characterizing random media. A novel interferometric technique is introduced for controlling the polarimetric, spectral, and coherence characteristics of random electromagnetic beams. Several new techniques are presented for measuring the state of polarization and the polarization transfer through scattering media. The polarimetric signatures of different particulate systems are related to their structural...
Show moreThe polarimetric properties of random electromagnetic beams provide new means for characterizing random media. A novel interferometric technique is introduced for controlling the polarimetric, spectral, and coherence characteristics of random electromagnetic beams. Several new techniques are presented for measuring the state of polarization and the polarization transfer through scattering media. The polarimetric signatures of different particulate systems are related to their structural properties and to the size distribution, shape, orientation, birefringent or dichroic properties of the particles. Various scattering regimes and different geometries are discussed for applications relevant to the bio-medical field, material science, and remote sensing.
Show less - Date Issued
- 2004
- Identifier
- CFE0000049, ucf:46132
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0000049
- Title
- QUADRATIC SPATIAL SOLITON INTERACTIONS.
- Creator
-
Jankovic, Ladislav, Stegeman, George I., University of Central Florida
- Abstract / Description
-
Quadratic spatial soliton interactions were investigated in this Dissertation. The first part deals with characterizing the principal features of multi-soliton generation and soliton self-reflection. The second deals with two beam processes leading to soliton interactions and collisions. These subjects were investigated both theoretically and experimentally. The experiments were performed by using potassium niobate (KNBO3) and periodically poled potassium titanyl phosphate (KTP) crystals....
Show moreQuadratic spatial soliton interactions were investigated in this Dissertation. The first part deals with characterizing the principal features of multi-soliton generation and soliton self-reflection. The second deals with two beam processes leading to soliton interactions and collisions. These subjects were investigated both theoretically and experimentally. The experiments were performed by using potassium niobate (KNBO3) and periodically poled potassium titanyl phosphate (KTP) crystals. These particular crystals were desirable for these experiments because of their large nonlinear coefficients and, more importantly, because the experiments could be performed under non-critical-phase-matching (NCPM) conditions. The single soliton generation measurements, performed on KNBO3 by launching the fundamental component only, showed a broad angular acceptance bandwidth which was important for the soliton collisions performed later. Furthermore, at high input intensities multi-soliton generation was observed for the first time. The influence on the multi-soliton patterns generated of the input intensity and beam symmetry was investigated. The combined experimental and theoretical efforts indicated that spatial and temporal noise on the input laser beam induced multi-soliton patterns. Another research direction pursued was intensity dependent soliton routing by using of a specially engineered quadratically nonlinear interface within a periodically poled KTP sample. This was the first time demonstration of the self-reflection phenomenon in a system with a quadratic nonlinearity. The feature investigated is believed to have a great potential for soliton routing and manipulation by engineered structures. A detailed investigation was conducted on two soliton interaction and collision processes. Birth of an additional soliton resulting from a two soliton collision was observed and characterized for the special case of a non-planar geometry. A small amount of spiraling, up to 30 degrees rotation, was measured in the experiments performed. The parameters relevant for characterizing soliton collision processes were also studied in detail. Measurements were performed for various collision angles (from 0.2 to 4 degrees), phase mismatch, relative phase between the solitons and the distance to the collision point within the sample (which affects soliton formation). Both the individual and combined effects of these collision variables were investigated. Based on the research conducted, several all-optical switching scenarios were proposed.
Show less - Date Issued
- 2004
- Identifier
- CFE0000090, ucf:46135
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0000090
- Title
- STABLE SPATIAL SOLITONS IN SEMICONDUCTOROPTICAL AMPLIFIERS.
- Creator
-
ultanir, erdem ahmet, Stegeman, George I., University of Central Florida
- Abstract / Description
-
A spatial soliton is a shape invariant self guided beam of light or a self induced waveguide.Spatial solitons appear as a result of the balance of diffraction and nonlinear focusing in asystem. They have been observed in many different conservative media in the last couple ofyears. Solitons are ubiquitous, because of the probability of using their interactions in opticaldata processing, communications etc. Up to now due to the power required to generate thesolitons, and the response times of...
Show moreA spatial soliton is a shape invariant self guided beam of light or a self induced waveguide.Spatial solitons appear as a result of the balance of diffraction and nonlinear focusing in asystem. They have been observed in many different conservative media in the last couple ofyears. Solitons are ubiquitous, because of the probability of using their interactions in opticaldata processing, communications etc. Up to now due to the power required to generate thesolitons, and the response times of the soliton supporting media, these special waves of naturecould not penetrate the applications arena. Semiconductors, with their resonant nonlinearities, arethought to be ideal candidates for fast switching, low power spatial solitons.In this dissertation it is shown theoretically and experimentally that it is possible toobserve stable spatial solitons in a periodically patterned semiconductor optical amplifier(PPSOA). The solitons have unique beam profiles that change only with system parameters, likepumping current, etc. Their coherent and incoherent interactions which could lead to all opticaldevices have been investigated experimentally and theoretically. The formation of filaments ormodulational instability has been studied theoretically and yielded analytical formulae forevaluating the filament gain and the maximum spatial frequencies in PPSOA devices.Furthermore, discrete array amplifiers have been analyzed numerically for discrete solitons, andthe prospect of using multi peak discrete solitons as laser amplifiers is discussed.
Show less - Date Issued
- 2004
- Identifier
- CFE0000142, ucf:46153
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0000142
- Title
- DESIGN OF A DYNAMIC FOCUSING MICROSCOPE OBJECTIVE FOR OCT IMAGING.
- Creator
-
Murali, Supraja, Rolland, Jannick, University of Central Florida
- Abstract / Description
-
Optical Coherence Tomography (OCT) is a novel optical imaging technique that has assumed significant importance in bio-medical imaging in the last two decades because it is non-invasive and provides accurate, high resolution images of three dimensional cross-sections of body tissue, exceeding the capabilities of the current predominant imaging technique –ultrasound. In this thesis, high resolution OCT is investigated for in vivo detection of abnormal skin pathology for the early...
Show moreOptical Coherence Tomography (OCT) is a novel optical imaging technique that has assumed significant importance in bio-medical imaging in the last two decades because it is non-invasive and provides accurate, high resolution images of three dimensional cross-sections of body tissue, exceeding the capabilities of the current predominant imaging technique –ultrasound. In this thesis, high resolution OCT is investigated for in vivo detection of abnormal skin pathology for the early diagnosis of cancer. The technology presented is based on a dynamic focusing microscopic imaging probe conceived for skin imaging and the detection of abnormalities in the epithelium. A novel method for dynamic focusing in the biological sample using liquid crystal (LC) lens technology to obtain three dimensional images with invariant resolution throughout the cross-section and depth of the sample is presented and discussed. Two different skin probe configurations that incorporate dynamic focusing with LC lenses, one involving a reflective microscope objective sub-system, and the other involving an all-refractive immersion microscope objective sub-system are investigated. In order to ensure high resolution imaging, a low coherence broadband source, namely a femtosecond mode-locked Ti: sapphire laser centered at a wavelength of approximately 800nm is used to illuminate the sample. An in-depth description and analysis of the optical design and predicted performance of the two microscope objectives designed for dynamic three dimensional imaging at 5ìm resolution for the chosen broadband spectrum is presented.
Show less - Date Issued
- 2005
- Identifier
- CFE0000869, ucf:46665
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0000869
- Title
- ANNULAR BEAM SHAPING AND OPTICAL TREPANNING.
- Creator
-
Zeng, Danyong, Kar, Aravinda, University of Central Florida
- Abstract / Description
-
Percussion drilling and trepanning are two laser drilling methods. Percussion drilling is accomplished by focusing the laser beam to approximately the required diameter of the hole, exposing the material to one or a series of laser pulses at the same spot to melt and vaporize the material. Drilling by trepanning involves cutting a hole by rotating a laser beam with an optical element or an x–y galvo-scanner. Optical trepanning is a new laser drilling method using an annular beam. The...
Show morePercussion drilling and trepanning are two laser drilling methods. Percussion drilling is accomplished by focusing the laser beam to approximately the required diameter of the hole, exposing the material to one or a series of laser pulses at the same spot to melt and vaporize the material. Drilling by trepanning involves cutting a hole by rotating a laser beam with an optical element or an x–y galvo-scanner. Optical trepanning is a new laser drilling method using an annular beam. The annular beams allow numerous irradiance profiles to supply laser energy to the workpiece and thus provide more flexibility in affecting the hole quality than a traditional circular laser beam. Heating depth is important for drilling application. Since there are no good ways to measure the temperature inside substrate during the drilling process, an analytical model for optical trepanning has been developed by considering an axisymmetric, transient heat conduction equation, and the evolutions of the melting temperature isotherm, which is referred to as the melt boundary in this study, are calculated to investigate the influences of the laser pulse shapes and intensity profiles on the hole geometry. This mathematical model provides a means of understanding the thermal effect of laser irradiation with different annular beam shapes. To take account of conduction in the solid, vaporization and convection due to the melt flow caused by an assist gas, an analytical two-dimensional model is developed for optical trepanning. The influences of pulse duration, laser pulse length, pulse repetition rate, intensity profiles and beam radius are investigated to examine their effects on the recast layer thickness, hole depth and taper. The ray tracing technique of geometrical optics is employed to design the necessary optics to transform a Gaussian laser beam into an annular beam of different intensity profiles. Such profiles include half Gaussian with maximum intensities at the inner and outer surfaces of the annulus, respectively, and full Gaussian with maximum intensity within the annulus. Two refractive arrangements have been presented in this study. Geometric optics, or ray optics, describes light propagation in terms of rays. However, it is a simplification of optics, and fails to account for many important optical effects such as diffraction and polarization. The diffractive behaviors of this optical trepanning system are stimulated and analyzed based on the Fresnel diffraction integral. Diffraction patterns of the resulting optical system are measured using a laser beam analyzer and compared with the theoretical results. Based on the theoretical and experimental results, the effects of experimental parameters are discussed. We have designed the annular beam shaping optical elements and the gas delivery system to construct an optical trepanning system. Laser drilling experiments are performed on the Stainless Steel-316 (SS 316) plate and the Inconel 718 (IN 718) plate. The geometry of the trepanning holes with different sizes is presented in this study.
Show less - Date Issued
- 2006
- Identifier
- CFE0001333, ucf:46965
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0001333
- Title
- Dynamically Tunable Plasmonic Structural Color.
- Creator
-
Franklin, Daniel, Chanda, Debashis, Peale, Robert, Leuenberger, Michael, Wu, Shintson, University of Central Florida
- Abstract / Description
-
Functional surfaces which can control light across the electromagnetic spectrum are highly desirable. With the aid of advanced modeling and fabrication techniques, researchers have demonstrated surfaces with near arbitrary tailoring of reflected/transmitted amplitude, phase and polarization - the applications for which are diverse as light itself. These systems often comprise of structured metals and dielectrics that, when combined, manifest resonances dependent on structural dimensions. This...
Show moreFunctional surfaces which can control light across the electromagnetic spectrum are highly desirable. With the aid of advanced modeling and fabrication techniques, researchers have demonstrated surfaces with near arbitrary tailoring of reflected/transmitted amplitude, phase and polarization - the applications for which are diverse as light itself. These systems often comprise of structured metals and dielectrics that, when combined, manifest resonances dependent on structural dimensions. This attribute provides a convenient and direct path to arbitrarily engineer the surface's optical characteristics across many electromagnetic regimes. But while many of these plasmonic systems struggle to compete with the efficiency of pre-existing technologies, the ability to tune plamsonic structures post-fabrication is a distinct advantage which may lead to novel devices. In this work, I will summarize fundamental and applied aspects of tunable plasmonic systems as applied to the visible and infrared regimes. I will demonstrate how liquid crystal may be used to dynamically and reversibly tune the plasmonic resonances of metallic surfaces on a millisecond time scale. For the visible, this results in dynamic color-changing surfaces capable of covering the entire RGB color space and which is compatible with active addressing schemes. I will then show the application of these concepts to infrared absorbers through the use of liquid crystal and phase change materials. The later of these devices can find use in infrared data/image encoding, thermal management and camouflage. Together, these works explore the limits of tunable plasmonic systems and the novel devices they might lead to.
Show less - Date Issued
- 2018
- Identifier
- CFE0007001, ucf:52052
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0007001
- Title
- Joint Optimization of Illumination and Communication for a Multi-Element VLC Architecture.
- Creator
-
Ibne Mushfique, Sifat, Yuksel, Murat, Pourmohammadi Fallah, Yaser, Turgut, Damla, University of Central Florida
- Abstract / Description
-
Because of the ever increasing demand wireless data in the modern era, the Radio Frequency (RF) spectrum is becoming more congested. The remaining RF spectrum is being shrunk at a very heavy rate, and spectral management is becoming more difficult. Mobile data is estimated to grow more than 10 times between 2013 and 2019, and due to this explosion in data usage, mobile operators are having serious concerns focusing on public Wireless Fidelity (Wi-Fi) and other alternative technologies....
Show moreBecause of the ever increasing demand wireless data in the modern era, the Radio Frequency (RF) spectrum is becoming more congested. The remaining RF spectrum is being shrunk at a very heavy rate, and spectral management is becoming more difficult. Mobile data is estimated to grow more than 10 times between 2013 and 2019, and due to this explosion in data usage, mobile operators are having serious concerns focusing on public Wireless Fidelity (Wi-Fi) and other alternative technologies. Visible Light Communication (VLC) is a recent promising technology complementary to RF spectrum which operates at the visible light spectrum band (roughly 400 THz to 780 THz) and it has 10,000 times bigger size than radio waves (roughly 3 kHz to 300 GHz). Due to this tremendous potential, VLC has captured a lot of interest recently as there is already an extensive deployment of energy efficient Light Emitting Diodes (LEDs). The advancements in LED technology with fast nanosecond switching times is also very encouraging. In this work, we present hybrid RF/VLC architecture which is capable of providing simultaneous lighting and communication coverage in an indoor setting. The architecture consists of a multi-element hemispherical bulb design, where it is possible to transmit multiple data streams from the multi-element hemispherical bulb using LED modules. We present the detailed components of the architecture and make simulations considering various VLC transmitter configurations. Also, we devise an approach for an efficient bulb design mechanism to maintain both illumination and communication at a satisfactory rate, and analyze it in the case of two users in a room. The approach involves formulating an optimization problem and tackling the problem using a simple partitioning algorithm. The results indicate that good link quality and high spatial reuse can be maintained in a typical indoor communication setting.
Show less - Date Issued
- 2018
- Identifier
- CFE0007016, ucf:52025
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0007016
- Title
- ON THE USE OF GAUSSIAN FILTER FUNCTIONS FOR ADAPTIVE OPTICS.
- Creator
-
Assad, Merfit, Andrews, Larry, University of Central Florida
- Abstract / Description
-
For adaptive optic systems, the use of aperture filter functions calculated using various Zernike modes can be useful in removing lower-order aberrations caused by atmospheric turbulence. Traditionally, these filter functions are calculated using the step function depicting a hard aperture that introduces integrals that are sometimes difficult to integrate and must be done numerically. The Gaussian method can be used in place of the conventional method for calculating the aperture filter...
Show moreFor adaptive optic systems, the use of aperture filter functions calculated using various Zernike modes can be useful in removing lower-order aberrations caused by atmospheric turbulence. Traditionally, these filter functions are calculated using the step function depicting a hard aperture that introduces integrals that are sometimes difficult to integrate and must be done numerically. The Gaussian method can be used in place of the conventional method for calculating the aperture filter functions. Evaluation of the Gaussian approximation for modeling a finite receiver aperture can be made by comparison of reduction in phase variance with results achieved using the conventional method. The validity of Gaussian approximation in this application is demonstrated by the consistency of results between the two methodologies. Comparison of reduction in scintillation by the two methodologies reveals several benefits derived from utilization of Gaussian approximation. The Gaussian approximation produces data that can be interpreted analytically. It further produces greater scintillation reduction. This paper will first examine the use of statistical models for predicting atmospheric turbulence and then the use of Zernike polynomials in adaptive optics. Next, this paper compares the reduction of phase variance and scintillation using the conventional method with the Gaussian approximation to evaluate the effectiveness of the new filter functions. The results of these comparisons are presented both as mathematical expressions and graphically.
Show less - Date Issued
- 2006
- Identifier
- CFE0001436, ucf:52885
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0001436
- Title
- OPTICAL NONLINEAR INTERACTIONS IN DIELECTRIC NANO-SUSPENSIONS.
- Creator
-
El-Ganainy, Ramy, Christodoulides, Demetrios, University of Central Florida
- Abstract / Description
-
This work is divided into two main parts. In the first part (chapters 2-7) we consider the nonlinear response of nano-particle colloidal systems. Starting from the Nernst-Planck and Smoluchowski equations, we demonstrate that in these arrangements the underlying nonlinearities as well as the nonlinear Rayleigh losses depend exponentially on optical intensity. Two different nonlinear regimes are identified depending on the refractive index contrast of the nanoparticles involved and the...
Show moreThis work is divided into two main parts. In the first part (chapters 2-7) we consider the nonlinear response of nano-particle colloidal systems. Starting from the Nernst-Planck and Smoluchowski equations, we demonstrate that in these arrangements the underlying nonlinearities as well as the nonlinear Rayleigh losses depend exponentially on optical intensity. Two different nonlinear regimes are identified depending on the refractive index contrast of the nanoparticles involved and the interesting prospect of self-induced transparency is demonstrated. Soliton stability is systematically analyzed for both 1D and 2D configurations and their propagation dynamics in the presence of Rayleigh losses is examined. We also investigate the modulation instability of plane waves and the transverse instabilities of soliton stripe beams propagating in nonlinear nano-suspensions. We show that in these systems, the process of modulational instability depends on the boundary conditions. On the other hand, the transverse instability of soliton stripes can exhibit new features as a result of 1D collapse caused by the exponential nonlinearity. Many-body effects on the systems' nonlinear response are also examined. Mayer cluster expansions are used in order to investigate particle-particle interactions. We show that the optical nonlinearity of these nano-suspensions can range anywhere from exponential to polynomial depending on the initial concentration and the chemistry of the electrolyte solution. The consequence of these inter-particle interactions on the soliton dynamics and their stability properties are also studied. The second part deals with linear and nonlinear properties of optical nano-wires and the coupled mode formalism of parity-time (PT) symmetric waveguides. Dispersion properties of AlGaAs nano-wires are studied and it is shown that the group velocity dispersion in such waveguides can be negative, thus enabling temporal solitons. We have also studied power flow in nano-waveguides and we have shown that under certain conditions, optical pulses propagating in such structures will exhibit power circulations. Finally PT symmetric waveguides were investigated and a suitable coupled mode theory to describe these systems was developed.
Show less - Date Issued
- 2009
- Identifier
- CFE0002847, ucf:48538
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0002847
- Title
- ACCELERATING OPTICAL AIRY BEAMS.
- Creator
-
Siviloglou, Georgios, CHRISTODOULIDES, DEMETRIOS, University of Central Florida
- Abstract / Description
-
Over the years, non-spreading or non-diffracting wave configurations have been systematically investigated in optics. Perhaps the best known example of a diffraction-free optical wave is the so-called Bessel beam, first suggested and observed by Durnin et al. This work sparked considerable theoretical and experimental activity and paved the way toward the discovery of other interesting non-diffracting solutions. In 1979 Berry and Balazs made an important observation within the context of...
Show moreOver the years, non-spreading or non-diffracting wave configurations have been systematically investigated in optics. Perhaps the best known example of a diffraction-free optical wave is the so-called Bessel beam, first suggested and observed by Durnin et al. This work sparked considerable theoretical and experimental activity and paved the way toward the discovery of other interesting non-diffracting solutions. In 1979 Berry and Balazs made an important observation within the context of quantum mechanics: they theoretically demonstrated that the Schrödinger equation describing a free particle can exhibit a non-spreading Airy wavepacket solution. This work remained largely unnoticed in the literature-partly because such wavepackets cannot be readily synthesized in quantum mechanics. In this dissertation we investigate both theoretically and experimentally the acceleration dynamics of non-spreading optical Airy beams in both one- and two-dimensional configurations. We show that this class of finite energy waves can retain their intensity features over several diffraction lengths. The possibility of other physical realizations involving spatio-temporal Airy wavepackets is also considered. As demonstrated in our experiments, these Airy beams can exhibit unusual features such as the ability to remain quasi-diffraction-free over long distances while their intensity features tend to freely accelerate during propagation. We have demonstrated experimentally that optical Airy beams propagating in free space can perform ballistic dynamics akin to those of projectiles moving under the action of gravity. The parabolic trajectories of these beams as well as the motion of their center of gravity were observed in good agreement with theory. Another remarkable property of optical Airy beams is their resilience in amplitude and phase perturbations. We show that this class of waves tends to reform during propagation in spite of the severity of the imposed perturbations. In all occasions the reconstruction of these beams is interpreted through their internal transverse power flow. The robustness of these optical beams in scattering and turbulent environments was also studied. The experimental observation of self-trapped Airy beams in unbiased nonlinear photorefractive media is also reported. This new class of non-local self-localized beams owes its existence to carrier diffusion effects as opposed to self-focusing. These finite energy Airy states exhibit a highly asymmetric intensity profile that is determined by the inherent properties of the nonlinear crystal. In addition, these wavepackets self-bend during propagation at an acceleration rate that is independent of the thermal energy associated with two-wave mixing diffusion photorefractive nonlinearity.
Show less - Date Issued
- 2010
- Identifier
- CFE0003193, ucf:48569
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0003193
- Title
- An investigation into a least squares method for image registration.
- Creator
-
Cordon, Ernest William, Patz, B.W., Engineering
- Abstract / Description
-
Florida Technological University College of Engineering Thesis; One of the problems associated with the automatic image processing of satellite photographs such as weather maps is the need for image registration; that is, the fitting of a map that has some translational and rotational bias to a known data base. This paper investigates a least square method of image registration using an image that has been converted into a boundary map with a pixel representation 1 for land, -1 for water and...
Show moreFlorida Technological University College of Engineering Thesis; One of the problems associated with the automatic image processing of satellite photographs such as weather maps is the need for image registration; that is, the fitting of a map that has some translational and rotational bias to a known data base. This paper investigates a least square method of image registration using an image that has been converted into a boundary map with a pixel representation 1 for land, -1 for water and zero for cloud pixels. A sampled correlation array is constructed by shifting the weather map to locations on a given grid, centered around a sampled correlation peak, and performing an accumulation of the pixel-by-pixel comparisons between the weather map and its data base over the whole map or a smaller search window. A least square approximation 0 f the translational and rotational bias is performed using the data from this sampled correlation array, fitted against the shape of an elliptical cone.
Show less - Date Issued
- 1978
- Identifier
- CFR0003516, ucf:53005
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFR0003516
- Title
- Realization of a fast automatic correlation algorithm for registration of satellite images.
- Creator
-
Kassak, John E., Patz, B.W., Engineering
- Abstract / Description
-
Florida Technological University College of Engineering Thesis; The requirement for a fast automated correlation algorithm for registration of satellite images is discussed. An overview of current registration techniques is presented indicating a correlator, matching binary maps compressed from the original imagery, may provide the required throughput when implemented with a dedicated hardware/processor. An actual registration problem utilizing GOES digitally processed imagery is chosen and...
Show moreFlorida Technological University College of Engineering Thesis; The requirement for a fast automated correlation algorithm for registration of satellite images is discussed. An overview of current registration techniques is presented indicating a correlator, matching binary maps compressed from the original imagery, may provide the required throughput when implemented with a dedicated hardware/processor. An actual registration problem utilizing GOES digitally processed imagery is chosen and defined. The realization of a fast correlator, matching image input data with sampled data base reference image data in real time is considered.
Show less - Date Issued
- 1978
- Identifier
- CFR0003495, ucf:53010
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFR0003495
- Title
- Techniques for characterization of third order optical nonlinearities.
- Creator
-
Ferdinandus, Manuel, Hagan, David, Vanstryland, Eric, Christodoulides, Demetrios, Hernandez, Florencio, University of Central Florida
- Abstract / Description
-
This dissertation describes the development of novel techniques for characterization of nonlinear properties of materials. The dissertation is divided into two parts, a background and theory section and a technique development section.In the background and theory section we explain the origins of the nonlinear optical response of materials across many different spatial and temporal scales. The mechanisms that we are most interested in are the electronic nuclear and reorientational responses,...
Show moreThis dissertation describes the development of novel techniques for characterization of nonlinear properties of materials. The dissertation is divided into two parts, a background and theory section and a technique development section.In the background and theory section we explain the origins of the nonlinear optical response of materials across many different spatial and temporal scales. The mechanisms that we are most interested in are the electronic nuclear and reorientational responses, which occur on the range of sub-femtosecond to several picoseconds. The electronic mechanism is due to the electrons of a material experiencing a non-parabolic potential well due a strong electric field and occurs on the sub-femtosecond timescale. The nuclear or vibrational effect results from the motion of the nuclei of the atoms and typically occurs on the order of a few hundred femtoseconds. Finally the reorientational nonlinearity is due to the alignment of the molecule to the electric field, which alters the polarizability of the molecule and typically occurs on the scale of a few picoseconds. There are other mechanisms can induce nonlinear optical effects such as thermal effects and electrostriction, but these effects typically occur on much larger timescales than we are interested in, and hence will not be a major focus of this dissertation.In the nonlinear characterization techniques section, we describe previous research into the field of nonlinear optical characterization techniques, describing the techniques used to characterize the nonlinear properties of materials, their applications and limitations. We will trace the development of two recently developed techniques for nonlinear spectroscopy ? the Dual Arm Z-Scan and the Beam Deflection techniques. The Dual Arm Z-Scan technique is an enhancement of the standard Z-Scan technique that allows for the measurement of small nonlinear signals in the presence of large background signals. This technique allows for the measurement of materials under certain conditions not previously measureable using the standard Z-Scan technique, such materials with low damage thresholds, poor solubility and thin films.In addition to the Dual Arm Z-Scan, we have developed a new method for characterizing nonlinear refraction, the Beam Deflection technique, which is a variation of the photothermal beam deflection technique previously used to measure very weak absorption signals. This technique offers relative ease of use, the ability to measure the absolute magnitude and sign of both the real and imaginary parts of ?^((3)) simultaneously with high sensitivity. We fully develop the theory for materials with instantaneous and non-instantaneous nonlinearities, with nonlinear absorption and group velocity mismatch. We also demonstrate the power of this technique to separate the isotropic and reorientational contributions of liquids by examining the temporal response and polarization dependences.Lastly, we summarize our conclusions and describe two promising future research directions that would benefit from the Dual Arm Z-Scan and Beam Deflection techniques.
Show less - Date Issued
- 2013
- Identifier
- CFE0005164, ucf:50709
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0005164
- Title
- Sensing with Specialty Optical Fibers.
- Creator
-
Van Newkirk, Amy, Schulzgen, Axel, Delfyett, Peter, Amezcua Correa, Rodrigo, Raghavan, Seetha, University of Central Florida
- Abstract / Description
-
Fiber optic based sensing is a growing field with many applications in civil and aerospace engineering, oil and gas industries, and particularly in harsh environments where electronics are not able to function. Optical fibers can be easily integrated into structures, are immune to electromagnetic interference, can be interrogated from remote distances, and can be multiplexed for distributed measurements. Because of these properties, specialty fiber designs and devices are being explored for...
Show moreFiber optic based sensing is a growing field with many applications in civil and aerospace engineering, oil and gas industries, and particularly in harsh environments where electronics are not able to function. Optical fibers can be easily integrated into structures, are immune to electromagnetic interference, can be interrogated from remote distances, and can be multiplexed for distributed measurements. Because of these properties, specialty fiber designs and devices are being explored for sensing temperature, strain, pressure, curvature, refractive index, and more. Here we show a detailed analysis of a multicore fiber (MCF) for sensing, including its design and optimization in simulation, as well as experimental operation when used as sensor. The multicore fiber sensor's performance as a function of temperature, strain, bending, and acoustic waves are all explored. The MCF sensors are shown to be able to withstand temperatures up to 1000(&)deg;C, making them suitable to be harsh environment sensors. Additionally, a simple method for increasing the sensitivity of the MCF to longitudinal force is shown to multiple the sensitivity of the MCF sensor by a factor of seven. Also, a configuration for decoupling force and temperature will be presented. Finally, a developing all-fiber device, a photonic lantern, will be shown in conjunction with the MCF in order to increase sensitivity, add directional sensitivity, and lower the cost of the sensor interrogation for bending measurements. In addition to the multicore fiber, an analysis of anti-resonant hollow core fiber (ARHCF) is also presented. The fibers' design-dependent propagation losses are explored, as well as their higher order mode content. Also, a potential application of an ARHCF for an in-fiber Raman air sensor is introduced, and the design optimization in simulation is shown.
Show less - Date Issued
- 2016
- Identifier
- CFE0006409, ucf:51490
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0006409
- Title
- LASER FILAMENT INTERACTION WITH AEROSOLS AND CLOUDS.
- Creator
-
Jeon, Cheonha, Richardson, Martin, Vanstryland, Eric, Baudelet, Matthieu, Sigman, Michael, University of Central Florida
- Abstract / Description
-
A high powered ultrashort laser pulse can propagate as a diffraction-free self-channeled structure called a filament, created by a combination of nonlinear processes. With its ability to convey extremely high intensity beams to distant targets, many applications such as remote sensing, cloud seeding, and discharge guiding are potentially possible. However, one of the main challenges of outdoor field applications is the laser propagation through the atmosphere where pressure fluctuations and...
Show moreA high powered ultrashort laser pulse can propagate as a diffraction-free self-channeled structure called a filament, created by a combination of nonlinear processes. With its ability to convey extremely high intensity beams to distant targets, many applications such as remote sensing, cloud seeding, and discharge guiding are potentially possible. However, one of the main challenges of outdoor field applications is the laser propagation through the atmosphere where pressure fluctuations and concentrations of aerosols may be present. The rationale behind the work presented in this dissertation is to evaluate the robustness of the filamentation, measure the interaction losses as well as understanding the modifications to (i) filament length (ii) supercontinuum generation, and (iii) the beam profile along propagation through perturbed media.Detailed studies of the interaction of a single filament with a single water droplet are presented. In addition, preliminary results on filament propagation through a cloud of aerosols are discussed. The effect of pressure on the beam profile along propagation and on the supercontinuum generated by the filament is studied. This document provides valuable insight into the complex nonlinear processes affecting the formation, propagation and post propagation of filaments under adverse atmospheric conditions.
Show less - Date Issued
- 2016
- Identifier
- CFE0006530, ucf:51368
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0006530
- Title
- Placement of Mode and Wavelength Converters for Throughput Enhancement in Optical Networks.
- Creator
-
Abdulrahman, Ruaa, Bassiouni, Mostafa, Chatterjee, Mainak, Zou, Changchun, University of Central Florida
- Abstract / Description
-
The success of recent experiments to transport data using combined wavelength division multiplexed (WDM) and mode-division multiplexed (MDM) transmission has generated optimism for the attainment of optical networks with unprecedented bandwidth capacity, exceeding the fundamental Shannon capacity limit attained by WDM alone. Optical mode converters and wavelength converters are devices that can be placed in future optical nodes (routers) to prevent or reduce the connection blocking rate and...
Show moreThe success of recent experiments to transport data using combined wavelength division multiplexed (WDM) and mode-division multiplexed (MDM) transmission has generated optimism for the attainment of optical networks with unprecedented bandwidth capacity, exceeding the fundamental Shannon capacity limit attained by WDM alone. Optical mode converters and wavelength converters are devices that can be placed in future optical nodes (routers) to prevent or reduce the connection blocking rate and consequently increase network throughput. In this thesis, the specific problem of the placement of mode converters (MC) and mode-wavelength converters (MWC) in combined mode and wavelength division multiplexing (MWDM) networks is investigated. Four previously proposed wavelength converter placement heuristics are extended to handle the placement of MC and MWC in MWDM networks. A simple but effective method for the placement of mode and wavelength converters in MWDM networks is proposed based on ranking the nodes with respect to the volume of received connection requests. The results of extensive simulation tests to evaluate the new method and compare its performance with the performance of the other four heuristics are presented. The thesis provides extensive comparison results among the five converter placement methods using different network topologies and under different network loads. The results demonstrate the effectiveness of the new proposed method in achieving lower blocking rates compared to the other more-complex converter placement heuristics.
Show less - Date Issued
- 2014
- Identifier
- CFE0005118, ucf:50756
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0005118
- Title
- Quantification of non-stoichiometry and impurities in transparent YAG ceramics by laser-induced breakdown spectroscopy (LIBS).
- Creator
-
Pandey, Sudeep, Gaume, Romain, Coffey, Kevin, Klemm, Richard, Baudelet, Matthieu, Curtarolo, Stefano, University of Central Florida
- Abstract / Description
-
Transparent ceramics are an important class of optical materials with applications in street-lighting, high-strength windows, electro- and magneto-optical isolators, high-power laser gain media and nuclear radiation detectors. Compared to single-crystal growth, ceramic processing enables size scalability, near net-shape forming and prevents issues associated with dopant segregation and inhomogeneity, such as stress-induced birefringence and wavefront distortions. The fabrication of high...
Show moreTransparent ceramics are an important class of optical materials with applications in street-lighting, high-strength windows, electro- and magneto-optical isolators, high-power laser gain media and nuclear radiation detectors. Compared to single-crystal growth, ceramic processing enables size scalability, near net-shape forming and prevents issues associated with dopant segregation and inhomogeneity, such as stress-induced birefringence and wavefront distortions. The fabrication of high optical grade ceramics by route of powder sintering, relies on a controlled set of techniques preventing the formation of scattering centers (pores and secondary phases) and harmful point defects (color centers, charge-carrier trapping sites). This thesis work investigates a novel approach in assisting the fabrication of yttrium aluminum garnet (YAG, Y3Al5O12) transparent ceramics, an important laser material, and minimizing the presence of these defects. As a line compound in the Al2O3-Y2O3 phase diagram, YAG has little tolerance for excess of either yttrium or aluminum oxides. What is more, the estimated compositional range of the garnet phase, (5/3-0.03)(<)Al/Y(<)(5/3+0.008), which is at the root of fabrication inconsistencies, challenges the sensitivity of most analytical techniques. We have evaluated the use of laser-induced breakdown spectroscopy (LIBS), a rapid, cost effective, non-destructive, and versatile technique, in the determination of stoichiometry and impurities at the various stages of the ceramic fabrication, i.e. in powders, green and sintered bodies. It was found that enough sensitivity and accuracy can be achieved on a custom-built system to discern 0.3 mole percent in the Al/Y ratio. To understand the influence of the plasma temperature on the ratio of the atomic emission lines of Al and Y species, simulations of YAG-based laser-induced plasmas were performed. The results have guided our experimental protocol by showing that above 12000 K, the Al/Y intensity ratio and thus the sensitivity of the measurement increases sharply with plasma temperature. In addition, we show that LIBS can be used to monitor the concentrations of unintentional trace impurities along those of sintering additives (SiO2) customarily used for the removal of porosity during firing. Hence, we reveal, for example, that less than 30% of SiO2 remains in the final ceramic due to evaporation during high temperature sintering. This work not only extends the range of capabilities of LIBS by showing how highly sensitive quantification of major elements can be performed in insulating materials, but also provides a new set of tools for estimating the range of solid-state solutions in advanced materials and understanding the densification of ceramics. We foresee that such capability will be invaluable for quality control purposes and in areas where fine and reproducible compositional tuning (defect engineering) is needed.
Show less - Date Issued
- 2017
- Identifier
- CFE0006774, ucf:51855
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0006774
- Title
- Optical Fluid-based Photonic and Display Devices.
- Creator
-
Xu, Su, Wu, Shintson, Li, Guifang, Moharam, M., Wu, Xinzhang, University of Central Florida
- Abstract / Description
-
Conventional solid-state photonic devices exhibit an ultra-high optical performance and durability, but minimal adaptability. Recently, optical fluid-based photonic and display devices are emerging. By dynamically manipulating the optical interface formed by liquids, the optical output can be reconfigured or adaptively tuned in real time. Such devices exhibit some unique characteristics that are not achievable in conventional solid-state photonic devices. Therefore, they open a gateway for...
Show moreConventional solid-state photonic devices exhibit an ultra-high optical performance and durability, but minimal adaptability. Recently, optical fluid-based photonic and display devices are emerging. By dynamically manipulating the optical interface formed by liquids, the optical output can be reconfigured or adaptively tuned in real time. Such devices exhibit some unique characteristics that are not achievable in conventional solid-state photonic devices. Therefore, they open a gateway for new applications, such as image and signal processing, optical communication, sensing, and lab-on-a-chip, etc. Different operation principles of optical fluid-based photonic devices have been proposed, for instance fluidic pressure, electrochemistry, thermal effect, environmentally adaptive hydrogel, electro-wetting and dielectrophoresis. In this dissertation, several novel optical fluid-based photonic and display devices are demonstrated. Their working principles are described and electro-optic properties investigated.The first part involves photonic devices based on fluidic pressure. Here, we present a membrane-encapsulated liquid lens actuated by a photo-activated polymer. This approach paves a way to achieve non-mechanical driving and easy integration with other photonic devices. Next, we develop a mechanical-wetting lens for visible and short-wavelength infrared applications. Such a device concept can be extended to longer wavelength if proper liquids are employed.In the second part, we reveal some new photonic and display devices based on dielectrophoretic effects. We conceive a dielectric liquid microlens with well-shaped electrode for fixing the droplet position and lowering the operating voltage. To widen the dynamic range, we demonstrate an approach to enable focus tuning from negative to positive or vice versa in a single dielectric lens without any moving part. The possibility of fabricating microlens arrays with different aperture and density using a simple method is also proposed. Furthermore, the fundamental electro-optic characteristics of dielectric liquid droplets are studied from the aspects of operating voltage, frequency and droplet size. In addition to dielectric liquid lenses, we also demonstrate some new optical switches based on dielectrophoretic effect, e.g., optical switch based on voltage-stretchable liquid crystal droplet, variable aperture or position-shifting droplet. These devices work well in the visible and near infrared spectral ranges. We also extend this approach to display and show a polarizer-free and color filter-free display. Simple fabrication, low power consumption, polarization independence, relatively low operating voltage as well as reasonably fast switching time are their key features.
Show less - Date Issued
- 2012
- Identifier
- CFE0004620, ucf:49943
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0004620
