Current Search: absorption (x)
View All Items
Pages
- Title
- NONLINEAR ABSORPTION AND FREE CARRIER RECOMBINATION IN DIRECT GAP SEMICONDUCTORS.
- Creator
-
Olszak, Peter, Van Stryland, Eric, University of Central Florida
- Abstract / Description
-
Nonlinear absorption of Indium Antimonide (InSb) has been studied for many years, yet due to the complexity of absorption mechanisms and experimental difficulties in the infrared, this is still a subject of research. Although measurements have been made in the past, a consistent model that worked for both picosecond and nanosecond pulse widths had not been demonstrated. In this project, temperature dependent two-photon (2PA) and free carrier absorption (FCA) spectra of InSb are measured using...
Show moreNonlinear absorption of Indium Antimonide (InSb) has been studied for many years, yet due to the complexity of absorption mechanisms and experimental difficulties in the infrared, this is still a subject of research. Although measurements have been made in the past, a consistent model that worked for both picosecond and nanosecond pulse widths had not been demonstrated. In this project, temperature dependent two-photon (2PA) and free carrier absorption (FCA) spectra of InSb are measured using femtosecond, picosecond, and nanosecond IR sources. The 2PA spectrum is measured at room temperature with femtosecond pulses, and the temperature dependence of 2PA and FCA is measured at 10.6m using a nanosecond CO2 laser giving results consistent with the temperature dependent measurements at several wavelengths made with a tunable picosecond system. Measurements over this substantial range of pulse widths give results for FCA and 2PA consistent with a recent theoretical model for FCA. While the FCA cross section has been generally accepted in the past to be a constant for the temperatures and wavelengths used in this study, this model predicts that it varies significantly with temperature as well as wavelength. Additionally, the results for 2PA are consistent with the band gap scaling (Eg-3) predicted by a simple two parabolic band model. Using nanosecond pulses from a CO2 laser enables the recombination rates to be determined through nonlinear transmittance measurements. Three-photon absorption is also observed in InSb for photon energies below the 2PA band edge. Prior to this work, data on three-photon absorption (3PA) in semiconductors was scarce and most experiments were performed over narrow spectral ranges, making comparison to the available theoretical models difficult. There was also disagreement between the theoretical results generated by different models, primarily in the spectral behavior. Therefore, we studied the band gap scaling and spectra of 3PA in several semiconductors by the Z-scan technique. The 3PA coefficient is found to vary as (Eg-7), as predicted by the scaling rules of simple two parabolic band models. The spectral behavior, which is considerably more complex than for 2PA, is found to agree well with a recently published theory based on a four-band model.
Show less - Date Issued
- 2010
- Identifier
- CFE0003402, ucf:48418
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0003402
- Title
- Infiltration in Stormwater Detention/ Percolation Basin Design.
- Creator
-
Beaver, Robert D., Hartman, J Paul, Engineering
- Abstract / Description
-
Florida Technological University College of Engineering Thesis; Investigations of soil parameters, infiltration testing, and storm observations are used to determine the infiltration characteristics for three Central Florida stormwater holding basins. Basic soil parameters are investigated and a value for available soil water storage is computed from these data. In-situ permeability and infiltration tests are used to obtain field permeability and infiltration rates. Infiltration test results...
Show moreFlorida Technological University College of Engineering Thesis; Investigations of soil parameters, infiltration testing, and storm observations are used to determine the infiltration characteristics for three Central Florida stormwater holding basins. Basic soil parameters are investigated and a value for available soil water storage is computed from these data. In-situ permeability and infiltration tests are used to obtain field permeability and infiltration rates. Infiltration test results may be applied to infiltration theory. Data from infiltration tests may be verified using available soil water storage computed from soil parameters. The effect of soil cover conditions is noted and investigated using the drum infiltrometer. Storm observations are used to confirm infiltration models. Infrequency of rainfall activity limited the number and reliability of observations. The effects of precipitation frequency and input intensity to the pond also noted in storm observations. A design procedure incorporating infiltration in stormwater retention basins is presented. This design procedure is based on infiltration theory and observed pond operation.
Show less - Date Issued
- 1977
- Identifier
- CFR0008151, ucf:52946
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFR0008151
- Title
- EXPERIMENTAL AND THEORETICAL APPROACHES TO CHARACTERIZATION OF ELECTRONIC NONLINEARITIES IN DIRECT-GAP SEMICONDUCTORS.
- Creator
-
Cirloganu, Claudiu, Van Stryland, Eric, University of Central Florida
- Abstract / Description
-
The general goal of this dissertation is to provide a comprehensive description of the limitations of established theories on bound electronic nonlinearities in direct-gap semiconductors by performing various experiments on wide and narrow bandgap semiconductors along with developing theoretical models. Nondegenerate two-photon absorption (2PA) is studied in several semiconductors showing orders of magnitude enhancement over the degenerate counterpart. In addition, three-photon absorption ...
Show moreThe general goal of this dissertation is to provide a comprehensive description of the limitations of established theories on bound electronic nonlinearities in direct-gap semiconductors by performing various experiments on wide and narrow bandgap semiconductors along with developing theoretical models. Nondegenerate two-photon absorption (2PA) is studied in several semiconductors showing orders of magnitude enhancement over the degenerate counterpart. In addition, three-photon absorption (3PA) is studied in ZnSe and other semiconductors and a new theory using a Kane 4-band model is developed which fits new data well. Finally, the narrow gap semiconductor InSb is studied with regard to multiphoton absorption, free-carrier nonlinearities and decay mechanisms. The non-degenerate two-photon absorption was investigated in several direct-gap semiconductors with picosecond and femtosecond pulses. Large enhancements in 2PA were demonstrated when employing highly non-degenerate photon pairs and the results were shown to be consistent to a simple 2-parabolic band theory based on a ÃÂ"dressedÃÂ" state approach. The nonlinear refractive index induced in such configurations was also calculated and possible implications of such extreme behavior are discussed. A large number of measurements of 3PA were taken at multiple wavelengths and in several semiconductors. The subsequent analysis has shown that simple 2-band model calculations (based on either perturbative or tunneling approaches) do not adequately describe the experimental trends. A more comprehensive model, based on KaneÃÂ's 4-band theory was developed and we calculate three-photon spectra for zincblende structures within the perturbative framework. We have confirmed the results of our calculations performing a series of Z-scans in semiconductors ZnSe and ZnS, yielding complete experimental three-photon spectra. A systematic approach based on using a large variety of pulse durations was needed to quantify the wealth of nonlinear optical processes in InSb, accessible in the mid-infrared range. Femtosecond pulses provided a lower limit to measurements of the instantaneous effects (absorptive and refractive), while picosecond pulses allowed further characterization of the free-carrier effects, including population dynamics in the high density regime (Auger effects). The model developed permitted us to verify the temperature dependence of free-carrier absorption recently predicted, and to successfully model optical limiting data with longer, nanosecond pulses.
Show less - Date Issued
- 2010
- Identifier
- CFE0003401, ucf:48417
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0003401
- Title
- Photophysics of Organic Probes and their Applications in Bioimaging (&) Photodynamic Therapy.
- Creator
-
Kim, Bosung, Belfield, Kevin, Zou, Shengli, Campiglia, Andres, Frazer, Andrew, Ali, Gul Shad, University of Central Florida
- Abstract / Description
-
Over the past several decades the phenomenon of luminescence (divided into fluorescence and phosphorescence) has received great attention in the field of biological science. This quest has motivated scientists for a variety of applications, including fluorescence imaging. Fluorescence microscopy techniques that provide unique advantages, such as high spatial resolution and superior sensitivity, have been regarded as attractive tools in biophotonics. With the progress of ultrafast laser...
Show moreOver the past several decades the phenomenon of luminescence (divided into fluorescence and phosphorescence) has received great attention in the field of biological science. This quest has motivated scientists for a variety of applications, including fluorescence imaging. Fluorescence microscopy techniques that provide unique advantages, such as high spatial resolution and superior sensitivity, have been regarded as attractive tools in biophotonics. With the progress of ultrafast laser sources, two-photon absorption (2PA), in which a molecule absorbs two photons simultaneously, has opened possibilities of using it for various applications. Two-photon fluorescence microscopy (2PFM), which affords deeper tissue penetration and excellent three-dimensional (3D) images, is now being widely employed for bioimaging. This dissertation focuses on the design, synthesis, and photophysical characterization of new fluorophores, as well as desirable applications. Chapter 1 gives an account of a brief introduction of luminescence and 2PA, as well as their utilities in biological applications. In chapter 2, a series of new BODIPY derivatives are presented along with their comprehensive linear and nonlinear characteristics. They exhibited excellent photophysical properties including large extinction coefficients, high fluorescence quantum yields, good photostability, and reasonable two-photon absorption cross sections. Two promising compounds were further evaluated as NIR fluorescent probes in one-photon and two-photon fluorescence imaging. Chapter 3 provides the design, synthesis, and photophysical characterization of two BODIPY dyes. In order to assess the potential of using the dye as a fluorescent probe, Lysotracker Red, a commercial lysosomal marker, was investigated for comparison purposes. The results indicate that figure of merit of both compounds were three orders of magnitude higher than that of Lysotracker Red. With an eye towards applications, one of the compounds was encapsulated in silica-based nanoparticles for in vitro and ex vivo one-photon and two-photon fluorescence imaging, in which the surface of the nanoparticle was modified with RGD peptides for specific targeting. The nanoprobe exhibited good biocompatibility and highly selective RGD-mediated uptake in ?V?3 integrin-overexpressing cancers, while maintaining efficient fluorescence quantum yield and high photostability. In chapter 4, the synthesis and photophysical properties of a novel photosensitizer with heavy atoms (halogen) were presented. The dye exhibited low fluorescence quantum yield, resulting in high singlet oxygen generation quantum yield. In vitro photodynamic studies demonstrated that photosensitization of the agent can induce cellular damage, subsequently leading to cell death by a necrotic cell death mechanism, supporting the therapeutic potential of using the agent for photodynamic therapy.
Show less - Date Issued
- 2015
- Identifier
- CFE0006041, ucf:50977
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0006041
- Title
- Low Absorption Liquid Crystal Materials for Midwave Infrared.
- Creator
-
Creekmore, Amy, Wu, Shintson, Moharam, Jim, Likamwa, Patrick, University of Central Florida
- Abstract / Description
-
Liquid crystal is an amazing class of soft matters with applications spanning from visible, infrared, millimeter wave, to terahertz. In addition to direct-view displays and projection displays, liquid crystal is also widely used in adaptive optics, tunable-focus lens, and laser beam steering. Although the visible region has well developed materials and mixtures for the vast variety of applications, the midwave infrared (MWIR) region of the electromagnetic spectrum invites much development as...
Show moreLiquid crystal is an amazing class of soft matters with applications spanning from visible, infrared, millimeter wave, to terahertz. In addition to direct-view displays and projection displays, liquid crystal is also widely used in adaptive optics, tunable-focus lens, and laser beam steering. Although the visible region has well developed materials and mixtures for the vast variety of applications, the midwave infrared (MWIR) region of the electromagnetic spectrum invites much development as only a few materials have been developed with these applications in mind. Unlike visible region, the major challenge for mid-wave infrared liquid crystal is inherently large absorption loss. To reduce absorption, some molecular engineering approaches have been considered, such as deuteration, fluorination, and chlorination. The fluorine and chlorine not only act as the polar group to provide dipole moment but also helps shift some vibration absorption bands outside the MWIR window. Long phenyl ring compounds, fluorinated tolane materials, and chlorinated terphenyl mixtures are explored; as well as a look as the potential bromine might introduce for future development. In this thesis, we first review the current materials and their performance in the mid-wave infrared region, explain the need for higher performing liquid crystals, and then discuss the methodology of compound development and mixture formulation. Some new chlorinated liquid crystal compounds are synthesized, mixture formulated, and their properties evaluated. Finally, we will explain the future work which needs to be performed in this field.
Show less - Date Issued
- 2014
- Identifier
- CFE0005594, ucf:50243
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0005594
- Title
- THREE-PHOTON ABSORPTION PROCESS IN ORGANIC DYES ENHANCED BY SURFACE PLASMON RESONANCE.
- Creator
-
Cohanoschi, Ion, Hernandez, Florencio, University of Central Florida
- Abstract / Description
-
Multi-photon absorption processes have received significant attention from the scientific community during the last decade, mainly because of their potential applications in optical limiting, data storage and biomedical fields. Perhaps, one of the most investigated processes studied so far has been two-photon absorption (2PA). These investigations have resulted in successful applications in all the fields mentioned above. However, 2PA present some limitations in the biomedical field when...
Show moreMulti-photon absorption processes have received significant attention from the scientific community during the last decade, mainly because of their potential applications in optical limiting, data storage and biomedical fields. Perhaps, one of the most investigated processes studied so far has been two-photon absorption (2PA). These investigations have resulted in successful applications in all the fields mentioned above. However, 2PA present some limitations in the biomedical field when pumping at typical 2PA wavelengths. In order to overcome these limitations, three-photon absorption (3PA) process has been proposed. However, 3PA in organic molecules has a disadvantage, typical values of σ3' are small (10-81 cm6s2/photon2), therefore, 3PA excitation requires high irradiances to induce the promotion of electrons from the ground state to the final excited state. To overcome this obstacle, specific molecules that exhibit large 3PA cross-section must be designed. Thus far, there is a lack of systematic studies that correlate 3PA processes with the molecular structure of organic compounds. In order to fill the existent gap in 3PA molecular engineering, in this dissertation we have investigated the structure/property relationship for a new family of fluorene derivatives with very high three-photon absorption cross-sections. We demonstrated that the symmetric intramolecular charge transfer as well as the -electron conjugation length enhances the 3PA cross-section of fluorene derivatives. In addition, we showed that the withdrawing electron character of the attractor groups in a pull-pull geometry proved greater 3PA cross-section. After looking for alternative ways to enhance the effective σ3' of organic molecules, we investigated the enhancement of two- and three-photon absorption processes by means of Surface Plasmon. We demonstrated an enhancement of the effective two- and three-photon absorption cross-section of an organic compound of 480 and 30 folds, respectively. We proved that the enhancement is a direct consequence of the electric field enhancement at a metal/buffer interface. Next, motivated by the demands for new materials with enhanced nonlinear optical properties, we studied the 3PA of Hematoporphyrin IX and J-aggregate supramolecular systems. As a result, we were able to propose the use of 3PA in photodynamic therapy using Photofrin, the only drug approved by the FDA for PDT.
Show less - Date Issued
- 2006
- Identifier
- CFE0001362, ucf:46981
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0001362
- Title
- STUDY OF THE EXCITED-STATE ABSORPTION PROPERTIES OF POLYMETHINE MOLECULES.
- Creator
-
Lepkowicz, Richard Stanley, Van Stryland, Eric W., University of Central Florida
- Abstract / Description
-
This dissertation investigates excited-state nonlinearities in a series of polymethine dyes for the application of nanosecond optical limiting. Optical limiters are devices that for low intensity light exhibit a high linear transmittance, but for high intensity light strongly attenuate the incident radiation. These devices would serve to protect optical sensors from intense laser radiation by clamping the maximum energy allowed through an optical system below the damage threshold of the...
Show moreThis dissertation investigates excited-state nonlinearities in a series of polymethine dyes for the application of nanosecond optical limiting. Optical limiters are devices that for low intensity light exhibit a high linear transmittance, but for high intensity light strongly attenuate the incident radiation. These devices would serve to protect optical sensors from intense laser radiation by clamping the maximum energy allowed through an optical system below the damage threshold of the sensor. The search is ongoing for optical materials that are both broadband and have high damage thresholds to be effective materials for limiting applications. Polymethine dyes are promising compounds due to a strong and broad excited-state absorption (ESA) band in the visible region. However, the effectiveness of polymethine molecules as applied to optical limiting is hindered by a saturation of the ESA process at high fluences. Experiments and theoretical modeling are performed to determine the root causes of this saturation effect in both the picosecond and nanosecond time regime. The polymethine molecules studied have chromophore lengths from di- to pentacarbocyanine (2 to 5 -CH=CH- groups) with various bridge structures. This allows us to develop relationships between the molecular parameters of the polymethine molecules and overall nonlinear absorption performance. The experiments conducted included femtosecond white light continuum pump-probe experiments to measure ESA spectra, picosecond two-color polarization-resolved pump-probe to measure excited-state dynamics and the orientation of transition dipole moments, and picosecond and nanosecond optical limiting and z-scans. From these experiments we are able to develop energy level models that describe the nonlinear absorption processes in polymethines from the picosecond to nanosecond time regime. This work, along with the quantum chemical modeling performed at the Institute of Physics and National Academy of Sciences of Ukraine, has resulted in the creation of dyes that have improved photochemical stability with larger nonlinearities. These are useful not only for optical limiting but also for a wide variety of nonlinear optical applications.
Show less - Date Issued
- 2004
- Identifier
- CFE0000002, ucf:46115
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0000002
- Title
- DEVELOPMENT AND VALIDATION OF AN ABSORPTION SENSOR FOR TIME-RESOLVED MEASUREMENTS OF CO AND CO2.
- Creator
-
Thurmond, Kyle, Vasu, Subith, University of Central Florida
- Abstract / Description
-
A sensor was developed for simultaneous measurements of carbon monoxide and carbon dioxide fluctuations in internal combustion engine exhaust gases. This sensor utilizes low-cost and compact LEDs that emit in the 3-5[mu] wavelength range which are more appropriate for practical applications than the more traditionally used lasers. An affordable, fast response sensor that can measure these gases has broad application that can lead to more efficient, fuel flexible engines and regulations of...
Show moreA sensor was developed for simultaneous measurements of carbon monoxide and carbon dioxide fluctuations in internal combustion engine exhaust gases. This sensor utilizes low-cost and compact LEDs that emit in the 3-5[mu] wavelength range which are more appropriate for practical applications than the more traditionally used lasers. An affordable, fast response sensor that can measure these gases has broad application that can lead to more efficient, fuel flexible engines and regulations of harmful emissions. LEDs have a more spectrally broad and diverging emission than lasers which presented many design challenges. The optical design software ZEMAX was utilized to overcome these challenges. CO and CO2 LED measurements are conducted in their fundamental bands centered at 4.7[mu] and 4.3[mu], respectively, while a reference LED at 3.6[mu] is used as a reference for H2O. Tests were carried out using a simple flow cell for validation and calibration of the instrument. The sensor was able to see 0.1% changes in CO2 and about 0.3% changes CO. No interference between CO and CO2 was observed.
Show less - Date Issued
- 2013
- Identifier
- CFH0004529, ucf:45192
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFH0004529
- Title
- MOLECULAR STRUCTURE NONLINEAR OPTICAL PROPERTY RELATIONSHIPS FOR A SERIES OF POLYMETHINE AND SQUARAINE MOLECULES.
- Creator
-
Fu, Jie, Van Stryland, Eric, University of Central Florida
- Abstract / Description
-
This dissertation reports on the investigation of the relationships between molecular structure and two-photon absorption (2PA) properties for a series of polymethine and squaraine molecules. Current and emerging applications exploiting the quadratic dependence upon laser intensity, such as two-photon fluorescence imaging, three-dimensional microfabrication, optical data storage and optical limiting, have motivated researchers to find novel materials exhibiting strong 2PA. Organic materials...
Show moreThis dissertation reports on the investigation of the relationships between molecular structure and two-photon absorption (2PA) properties for a series of polymethine and squaraine molecules. Current and emerging applications exploiting the quadratic dependence upon laser intensity, such as two-photon fluorescence imaging, three-dimensional microfabrication, optical data storage and optical limiting, have motivated researchers to find novel materials exhibiting strong 2PA. Organic materials are promising candidates because their linear and nonlinear optical properties can be optimized for applications by changing their structures through molecular engineering. Polymethine and squaraine dyes are particularly interesting because they are fluorescent and showing large 2PA. We used three independent nonlinear spectroscopic techniques (Z-scan, two-photon fluorescence and white-light continuum pump-probe spectroscopy) to obtain the 2PA spectra revealing 2PA bands, and we confirm the experimental data by comparing the results from the different methods mentioned. By systematically altering the structure of polyemthines and squaraines, we studied the effects of molecular symmetry, strength of donor terminal groups, conjugation length of the chromophore chain, polarity of solvents, and the effects of placing bridge molecules inside the chromophore chain on the 2PA properties. We also compared polymethine, squaraine, croconium and tetraon dyes with the same terminal groups to study the effects of the different additions inserted within the chromophore chain on their optical properties. Near IR absorbing squaraine dyes were experimentally observed to show extremely large 2PA cross sections ( 30000GM). A simplified three-level model was used to fit the measured 2PA spectra and detailed quantum chemical calculations revealed the reasons for the squaraine to exhibit strong 2PA. In addition, two-photon excitation fluorescence anisotropy spectra were measured through multiple 2PA transitions. A theoretical model based on four-levels with two intermediate states was derived and used for analysis of the experimental data.
Show less - Date Issued
- 2006
- Identifier
- CFE0001350, ucf:46967
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0001350
- Title
- Mode-locked Laser Based on Large Core Yb3+-Doped Fiber.
- Creator
-
Jia, Fei, Amezcua Correa, Rodrigo, Schulzgen, Axel, Fathpour, Sasan, University of Central Florida
- Abstract / Description
-
The thesis reviews principle of laser cavity and gives a general introduction to mode-locked laser (MLL). By using Yb3+-doped fiber as gain medium, passive MLL cavity is developed in experiment, aiming to obtain femtosecond pulses with high pump power from 25W to 35W. The gain medium fiber with 65(&)#181;m core diameter is cleaved with one flat end and another angled. Pump laser with 976nm wavelength is coupled into Yb3+-doped fiber to excite signal from 1020nm to 1040nm in the core. 9W is...
Show moreThe thesis reviews principle of laser cavity and gives a general introduction to mode-locked laser (MLL). By using Yb3+-doped fiber as gain medium, passive MLL cavity is developed in experiment, aiming to obtain femtosecond pulses with high pump power from 25W to 35W. The gain medium fiber with 65(&)#181;m core diameter is cleaved with one flat end and another angled. Pump laser with 976nm wavelength is coupled into Yb3+-doped fiber to excite signal from 1020nm to 1040nm in the core. 9W is threshold for laser setup. After locking all modes, picosecond pulses are output from laser cavity and coupled into dispersion delay fiber. By compressing pulse width, pulses are in soliton mode and then femtosecond laser pulses are obtained pulses are obtained. To measure ultrafast pulse width effectively, an auto-correlator based on Mach(-)Zehnder interferometer is developed. In the receiver terminal, a photodiode with range 320 nm to 1000 nm is used to detect signal and two photon absorption (TPA) method is applied.
Show less - Date Issued
- 2018
- Identifier
- CFE0007199, ucf:52249
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0007199
- Title
- Application of Two-Photon Absorbing Fluorene-Containing Compounds in Bioimaging and Photodyanimc Therapy.
- Creator
-
Yue, Xiling, Belfield, Kevin, Campiglia, Andres, Miles, Delbert, Frazer, Andrew, Cheng, Zixi, University of Central Florida
- Abstract / Description
-
Two-photon absorbing (2PA) materials has been widely studied for their highly localized excitation and nonlinear excitation efficiency. Application of 2PA materials includes fluorescence imaging, microfabrication, 3D data storage, photodynamic therapy, etc. Many materials have good 2PA photophysical properties, among which, the fluorenyl structure and its derivatives have attracted attention with their high 2PA cross-section and high fluorescence quantum yield.Herein, several compounds with...
Show moreTwo-photon absorbing (2PA) materials has been widely studied for their highly localized excitation and nonlinear excitation efficiency. Application of 2PA materials includes fluorescence imaging, microfabrication, 3D data storage, photodynamic therapy, etc. Many materials have good 2PA photophysical properties, among which, the fluorenyl structure and its derivatives have attracted attention with their high 2PA cross-section and high fluorescence quantum yield.Herein, several compounds with 2PA properties are discussed. All of these compounds contain one or two fluorenyl core units as part of the conjugated system. The aim of this dissertation is to discuss the application of these compounds according to their photophysical properties. In chapters 2 to 4, compounds were investigated for cell imaging and tissue imaging. In chapter 5, compounds were evaluated for photodynamic therapy effects on cancer cells. Chapters 2 and 3 detail compounds with quinolizinium and pyran as core structures, respectively. Fluorene was introduced into structures as substituents. Quinolizinium structures exhibited a large increase in fluorescence when binding with Bovine Serum Albumin (BSA). Further experiments in cell imaging demonstrated a fluorescence turn-on effect in cell membranes, indicating the possibility for these novel compounds to be promising membrane probes. Pyran structures were conjugated with arginylglycylaspartic acid peptide (RGD) to recognize integrin and introduced in cells and an animal model with tumors. Both probes showed specific targeting of tumor vasculature. Imaging reached penetration as deep as 350 ?m in solid tumors and exhibited good resolution. These results suggest the RGD-conjugated pyran structure should be a good candidate probe for live tissue imaging. Chapter 4 applied a fluorene core structure conjugated with RGD as well. Application of this fluorenyl probe compound is in wound healing animal models. Fluorescence was collected from vasculature and fibroblasts up to ? 1600 ?m within wound tissue in lesions made on the skin of mice. The resolution of images is also high enough to recognize cell types by immunohistochemical staining. This technology can be applied for reliable quantification and illustration of key biological processes taking place during tissue regeneration in the skin. Chapter 5 describes three fluorenyl core structures with photoacid generation properties. One of the structures showed excellent photo-induced toxicity. Cancer cells underwent necrotic cell death due to pH decrease in lysosomes and endosomes, suggesting a new mechanism for photodynamic therapy.
Show less - Date Issued
- 2014
- Identifier
- CFE0005565, ucf:50276
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0005565
- Title
- Two-photon absorption in bulk semiconductors and quantum well structures and its applications.
- Creator
-
Pattanaik, Himansu, Vanstryland, Eric, Hagan, David, Delfyett, Peter, Schoenfeld, Winston, Peale, Robert, University of Central Florida
- Abstract / Description
-
The purpose of this dissertation is to provide a study and possible applications of two-photon absorption (2PA), in direct-gap semiconductors and quantum-well (QW) semiconductor structures. One application uses extremely nondegenerate (END) 2PA, for mid-infrared (mid-IR) detection in uncooled semiconductors. The use of END, where the two photons have very different energies gives strong enhancement comapared to degenerate 2PA. This END-2PA enhanced detection is also applied to mid-IR imaging...
Show moreThe purpose of this dissertation is to provide a study and possible applications of two-photon absorption (2PA), in direct-gap semiconductors and quantum-well (QW) semiconductor structures. One application uses extremely nondegenerate (END) 2PA, for mid-infrared (mid-IR) detection in uncooled semiconductors. The use of END, where the two photons have very different energies gives strong enhancement comapared to degenerate 2PA. This END-2PA enhanced detection is also applied to mid-IR imaging and light detection and ranging (LIDAR) in uncooled direct-gap photodiodes. A theoretical study of degenerate 2PA (D-2PA) in quantum wells, QWs, is presented, along with a new theory of ND 2PA in QWs is developed. Pulsed mid-IR detection of femtosecond pulses is investigated in two different semiconductor p-i-n photodiodes (GaAs and GaN). With the smaller gap materials having larger ND-2PA, it is observed that they have better sensitivity to mid-IR detection, but unwanted background from D-2PA outweighs this advantage. A comparison of responsivity and signal-to-background ratio for GaAs and GaN in END-2PA based detection is presented. END-2PA enhancement is utilized for CW IR detection in uncooled GaAs and GaN p-i-n photodiodes. The pulsed mid-IR detection experiments are further extended to perform mid-IR imaging in uncooled GaN p-i-n photodetectors. A 3-D automated scanning gated imaging system is developed to obtain 3-D mid-IR images of various objects. The gated imaging system allows simultaneous 3-D and 2-D imaging of objects. The 3-D gated imaging system described in the dissertation could be used for examination of buried structures (microchannels, defects etc.) or laser written volumetric structures and could also be suitable for in-vivo imaging applications in biology in the mid-IR spectral region. As an example, 3-D imaging of buried semiconductor structures is presented.A theoretical study of D-2PA of QWs for transverse electric (TE) and transverse magnetic (TM) fields is carried out and an analytical expression for the D-2PA coefficient in QWs using second-order perturbation theory is derived. A theory for ND-2PA in QW semiconductor using second-order perturbation theory is developed for the first time and an analytical expression for the ND-2PA coefficient for TE, TM, and the mixed case of TE and TM is derived. The shape of the 2PA curve for the D-2PA and ND-2PA for QWs in the TE case is similar to that of bulk semiconductors. As governed by the selection rules both the D-2PA and ND-2PA curves for the TE case does not show a step-like signature for the density of states of the QWs whereas 2PA curve for the TM case shows such step like sharp features. The ND-2PA coefficient for TE, TM, and the mixed case is compared with that obtained for bulk semiconductors. Large enhancement in ND-2PA of QW semiconductors for the TM case over bulk semiconductors is predicted.
Show less - Date Issued
- 2015
- Identifier
- CFE0005684, ucf:50164
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0005684
- Title
- Enhanced Two-Photon Absorption in a Squaraine-Fluorene-Squaraine Dye: Design, Synthesis, Photophysical Properties, and Solvatochromic Behavior.
- Creator
-
Moreshead, William, Belfield, Kevin, Campiglia, Andres, Zou, Shengli, Frazer, Andrew, Beiler, Rosalind, University of Central Florida
- Abstract / Description
-
The discovery of any new technology is usually accompanied by a need for new or improved materials which make that technology useful in practical applications. In the case of two-photon absorption (2PA) this has truly been the case. Since its first demonstration in 1961, there has been an ever increasing quest to understand the relationships between two-photon absorption and the structure of two-photon absorbing materials. This quest has been motivated by the many applications for 2PA which...
Show moreThe discovery of any new technology is usually accompanied by a need for new or improved materials which make that technology useful in practical applications. In the case of two-photon absorption (2PA) this has truly been the case. Since its first demonstration in 1961, there has been an ever increasing quest to understand the relationships between two-photon absorption and the structure of two-photon absorbing materials. This quest has been motivated by the many applications for 2PA which have been reported, including fluorescence bioimaging, 3D microfabrication, 3D optical data storage, upconverted lasing, and photodynamic therapy.The work presented in this dissertation represents another step in the effort to better understand the structure/property relationships of 2PA. In this work a new, squaraine-fluorene-squaraine molecule, proposed through a joint effort of quantum and synthetic chemists, was synthesized and its photophysical properties were measured. The measurements included linear and two-photon photophysical properties, as well as solvatochromic behavior. Quantum calculations were done to aid in understanding those photophysical and solvatochromic properties. A single squaraine dye was also synthesized and used as a model compound to assist in understanding this new structure.In Chapter 1 an introduction to 2PA and several of its applications is given. Chapter 2 gives a background of 2PA structure/property relationships that have been reported to date, based on work done with polymethine dyes. Chapter 3 gives a full account of the synthesis, characterization, and detailed quantum chemical analyses of this new squaraine-fluorene-squaraine molecule and the corresponding model compound squaraine dye. Chapter 4 gives some additional work and suggested future directions.
Show less - Date Issued
- 2013
- Identifier
- CFE0005384, ucf:50450
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0005384
- Title
- Enhanced Microwave Hyperthermia using Nanoparticles.
- Creator
-
Urdaneta, Maryory, Wahid, Parveen, Sundaram, Kalpathy, Richie, Samuel, Gong, Xun, Challapalli, Suryanarayana, University of Central Florida
- Abstract / Description
-
In this dissertation a study of enhanced hyperthermia for cancer treatment through the use of magnetic nanoparticles is presented. Hyperthermia has been in use for many years, as a potential alternative method in cancer treatment, and high frequency microwave radiation has been used successfully to raise the tumor temperature to around 42(&)deg;C in superficial tumors without causing damage to surrounding healthy tissues. Magnetic fluid hyperthermia involves the use of magnetic nanoparticles...
Show moreIn this dissertation a study of enhanced hyperthermia for cancer treatment through the use of magnetic nanoparticles is presented. Hyperthermia has been in use for many years, as a potential alternative method in cancer treatment, and high frequency microwave radiation has been used successfully to raise the tumor temperature to around 42(&)deg;C in superficial tumors without causing damage to surrounding healthy tissues. Magnetic fluid hyperthermia involves the use of magnetic nanoparticles injected into the tumor before exposure to microwave radiation. The magnetic energy in the nanoparticles is converted into heat allowing for a more rapid rise of temperature in the tumor to the desired level. In addition, the nanoparticles allow the electromagnetic absorption to be focused in the tumor and can be used to treat deep tumors in organs, such as the liver. Iron oxide magnetic nanoparticles were considered for this study as they are non-toxic and bio-compatible. For the case of breast cancer, the values for the temperature and specific absorption rate (SAR) in the tumor and in the healthy tissue were obtained through simulations and validated by measurement done on phantom models. Various characteristics of the nanoparticles such as radius, magnetic susceptibility and concentration were considered. In order to take the effect of the blood flow, which causes cooling and helps maintain the body temperature, various blood perfusion rates for a tumor in the liver were studied. A human male model in SEMCAD X, in which blood flow can be adjusted, was used for simulations. The tumor was injected with the nanoparticles and the change in temperature upon exposure to electromagnetic radiation was observed. The simulated results were compared with measured results on a liver phantom model in which saline solution was used to model blood flow. There was good agreement between the measured and simulated results.
Show less - Date Issued
- 2015
- Identifier
- CFE0005731, ucf:50093
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0005731
- Title
- APPLICATION OF ABSORPTIVE TREATMENTS ON TRAFFIC NOISE BARRIERS IN FLORIDA.
- Creator
-
Chua, Chin Boon, Wayson, Roger, University of Central Florida
- Abstract / Description
-
In this thesis, the parallel barrier analysis feature in the Federal Highway Administration Traffic Noise Model (FHWA TNM), which is based on RAYVERB was used to explore the effects of multiple reflections due to single and parallel barriers and the use of absorptive treatment. Database was developed from the data collected from previous research efforts was used to generate a best fit equation model that can be used as a predetermining tool to determine the magnitude of parallel barrier...
Show moreIn this thesis, the parallel barrier analysis feature in the Federal Highway Administration Traffic Noise Model (FHWA TNM), which is based on RAYVERB was used to explore the effects of multiple reflections due to single and parallel barriers and the use of absorptive treatment. Database was developed from the data collected from previous research efforts was used to generate a best fit equation model that can be used as a predetermining tool to determine the magnitude of parallel barrier insertion loss. The best fit equation model was then used to test against measured/model result and TNM prediction results for its validity. Absorptive materials were also studied such that 3 top of them were selected and recommended for Florida highway barrier use. It was found that the top three absorptive treatments for use on Florida highway barriers have been determined to be cementitous material, metal wool and glass fiber. These materials can be used to reduce the sound reflections for single and parallel barriers. The developed best fit equation model from this research is Deg = -2.17NRC - CW0.42 + 1.97eln(BH) + RH0.29 + DBB0.27; the prediction results give moderately high R2 value of 0.55 if compared to the results from database. Prediction results from best fit equation model was also found to be consistent with the results from the measure/modeled results, providing further proof of the validity of the model. However, if compared results from equation model, TNM and measured/model (measured and model compared results using ANSI method), TNM was shown to provide higher insertion loss degradation. It was found that the most effective placement of absorptive material was the pattern which covers the barrier from the bottom up; it was also found that only about 60% from the bottom of the barrier area requires covering with high NRC absorptive treatment (NRC greater than 0.8) without sacrificing insertion loss. Also, if the barrier area near the top includes an easily obtainable NRC value of 0.4, only 40% to 50% of the bottom barrier needs absorptive treatment with a higher, more expensive NRC rating. These findings can substantially reduce the cost of conventional absorptive barrier which have full coverage of high NRC absorptive treatment. This research has begun important improvements in noise barrier design, additional work can be continued to further verify all the findings in this thesis such that easier and better equation model can be developed to calculate insertion loss degradation and cheaper absorptive barrier with less absorptive material usage can be built.
Show less - Date Issued
- 2004
- Identifier
- CFE0000008, ucf:46127
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0000008
- Title
- NONLINEAR OPTICAL PROPERTIES OF ORGANIC CHROMOPHORES CALCULATED WITHIN TIME DEPENDENT DENSITY FUNCTIONAL THEORY.
- Creator
-
Tafur, Sergio, Kokoouline, Viatcheslav, University of Central Florida
- Abstract / Description
-
Time Dependent Density Functional Theory offers a good accuracy/computational cost ratio among different methods used to predict the electronic structure for molecules of practical interest. The Coupled Electronic Oscillator (CEO) formalism was recently shown to accurately predict Nonlinear Optical (NLO) properties of organic chromophores when combined with Time Dependent Density Functional Theory. Unfortunately, CEO does not lend itself easily to interpretation of the structure activity...
Show moreTime Dependent Density Functional Theory offers a good accuracy/computational cost ratio among different methods used to predict the electronic structure for molecules of practical interest. The Coupled Electronic Oscillator (CEO) formalism was recently shown to accurately predict Nonlinear Optical (NLO) properties of organic chromophores when combined with Time Dependent Density Functional Theory. Unfortunately, CEO does not lend itself easily to interpretation of the structure activity relationships of chromophores. On the other hand, the Sum Over States formalism in combination with semiempirical wavefunction methods has been used in the past for the design of simplified essential states models. These models can be applied to optimization of NLO properties of interest for applications. Unfortunately, TD-DFT can not be combined directly with SOS because state-to-state transition dipoles are not defined in the linear response TD approach. In this work, a second order CEO approach to TD-DFT is simplified so that properties of double excited states and state-to-state transition dipoles may be expressed through the combination of linear response properties. This approach is termed the a posteriori Tamm-Dancoff approximation (ATDA), and validated against high-level wavefunction theory methods. Sum over States (SOS) and related Two-Photon Transition Matrix formalism are then used to predict Two-Photon Absorption (2PA) profiles and anisotropy, as well as Second Harmonic Generation (SHG) properties. Numerical results for several conjugated molecules are in excellent agreement with CEO and finite field calculations, and reproduce experimental measurements well.
Show less - Date Issued
- 2007
- Identifier
- CFE0001853, ucf:47372
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0001853
- Title
- The Effect of Morphology on Reflectance in Silicon Nanowires Grown by Electroless Etching.
- Creator
-
Velez, Victor, Sundaram, Kalpathy, Kapoor, Vikram, Yuan, Jiann-Shiun, Abdolvand, Reza, Kar, Aravinda, University of Central Florida
- Abstract / Description
-
The strong light trapping properties of Silicon Nanowires have attracted much interest in the past few years for the conversion of sun energy into conventional electricity. Studies have been completed for many researchers to reduce the cost of fabrication and reflectance of solar light in these nanostructures to make a cheaper and more efficient solar cell technology by using less equipment for fabrication and employing different materials and solution concentrations. Silver, a conducting and...
Show moreThe strong light trapping properties of Silicon Nanowires have attracted much interest in the past few years for the conversion of sun energy into conventional electricity. Studies have been completed for many researchers to reduce the cost of fabrication and reflectance of solar light in these nanostructures to make a cheaper and more efficient solar cell technology by using less equipment for fabrication and employing different materials and solution concentrations. Silver, a conducting and stable metal is used these days as a precursor to react with silicon and then form the nanowires. Its adequate selection of solution concentration for a size of silicon substrate and the treatment for post-cleaning of silver dendrites make it a viable method among the others. It is an aim of this research to obtain significant low reflectance across the visible solar light range. Detailed concentration, fabrication and reflectance studies is carried out on silicon wafer in order to expand knowledge and understanding.In this study, electroless etching technique has been used as the growth mechanism of SiNWs at room temperature. Optimum ratios of solution concentration and duration for different sizes of exposed area to grow tall silicon nanowires derived from experimentation are presented. Surface imaging of the structures and dimension of length and diameter have been determined by Scanner Electron Microscopy (SEM) and the reflectance in the optical range in silicon nanowires has been make using UV-Visible Spectrophotometer.
Show less - Date Issued
- 2017
- Identifier
- CFE0006815, ucf:51807
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0006815
- Title
- CHEMICAL STRUCTURE - NONLINEAR OPTICAL PROPERTY RELATIONSHIPS FOR A SERIES OF TWO-PHOTON ABSORBING FLUORENE MOLECULES.
- Creator
-
Hales, Joel McCajah, Van Stryland, Eric W., University of Central Florida
- Abstract / Description
-
This dissertation reports on the investigation of two-photon absorption (2PA) in a series of fluorenyl molecules. Several current and emerging technologies exploit this optical nonlinearity including two-photon fluorescence imaging, three-dimensional microfabrication, site-specific photodynamic cancer therapy and biological caging studies. The two key features of this nonlinearity which make it an ideal candidate for the above applications are its quadratic dependence on the incident...
Show moreThis dissertation reports on the investigation of two-photon absorption (2PA) in a series of fluorenyl molecules. Several current and emerging technologies exploit this optical nonlinearity including two-photon fluorescence imaging, three-dimensional microfabrication, site-specific photodynamic cancer therapy and biological caging studies. The two key features of this nonlinearity which make it an ideal candidate for the above applications are its quadratic dependence on the incident irradiance and the improved penetration into absorbing media that it affords. As a consequence of the burgeoning field which exploits 2PA, it is a goal to find materials that exhibit strong two-photon absorbing capabilities. Organic materials are promising candidates for 2PA applications because their material properties can be tailored through molecular engineering thereby facilitating optimization of their nonlinear optical properties. Fluorene derivatives are particularly interesting since they possess high photochemical stability for organic molecules and are generally strongly fluorescent. By systematically altering the structural properties in a series of fluorenyl molecules, we have determined how these changes affect their two-photon absorbing capabilities. This was accomplished through characterization of both the strength and location of their 2PA spectra. In order to ensure the validity of these results, three separate nonlinear characterization techniques were employed: two-photon fluorescence spectroscopy, white-light continuum pump-probe spectroscopy, and the Z-scan technique. In addition, full linear spectroscopic characterization was performed on these molecules along with supplementary quantum chemical calculations to obtain certain molecular properties that might impact the nonlinearity. Different designs in chemical architecture allowed investigation of the effects of symmetry, solvism, donor-acceptor strengths, conjugation length, and multi-branched geometries on the two-photon absorbing properties of these molecules. In addition, the means to enhance 2PA via intermediate state resonances was investigated. To provide plausible explanations for the experimentally observed trends, a conceptually simple three level model was employed. The subsequent correlations found between chemical structure and the linear and nonlinear optical properties of these molecules provided definitive conclusions on how to properly optimize their two-photon absorbing capabilities. The resulting large nonlinearities found in these molecules have already shown promise in a variety of the aforementioned applications.
Show less - Date Issued
- 2004
- Identifier
- CFE0000005, ucf:46103
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0000005
- Title
- TWO-PHOTON 3D OPTICAL DATA STORAGE VIA FLUORESCENCE MODULATION OF FLUORENE DYES BY PHOTOCHROMIC DIARYLETHENES.
- Creator
-
Corredor, Claudia, Belfield, Kevin D., University of Central Florida
- Abstract / Description
-
Three-dimensional (3D) optical data storage based on two-photon processes provides highly confined excitation in a recording medium and a mechanism for writing and reading data with less cross talk between multiple memory layers, due to the quadratic dependence of two photon absorption (2PA) on the incident light intensity. The capacity for highly confined excitation and intrinsic 3D resolution affords immense information storage capacity (up to 1012 bits/cm3). Recently, the use of...
Show moreThree-dimensional (3D) optical data storage based on two-photon processes provides highly confined excitation in a recording medium and a mechanism for writing and reading data with less cross talk between multiple memory layers, due to the quadratic dependence of two photon absorption (2PA) on the incident light intensity. The capacity for highly confined excitation and intrinsic 3D resolution affords immense information storage capacity (up to 1012 bits/cm3). Recently, the use of photochromic materials for 3D memory has received intense interest because of several major advantages over current optical systems, including their erasable/rewritable capability, high resolution, and high sensitivity. This work demonstrates a novel two-photon 3D optical storage system based on the modulation of the fluorescence emission of a highly efficient two-photon absorbing fluorescent dye (fluorene derivative) and a photochromic compound (diarylethene). The feasibility of using efficient intermolecular Förster Resonance Energy Transfer (RET) from the non-covalently linked two-photon absorbing fluorescent fluorene derivative to the photochromic diarylethene as a novel read-out method in a two-photon optical data storage system was explored. For the purpose of the development of this novel two-photon 3D optical storage system, linear and two-photon spectroscopic characterization of commercial diarylethenes in solution and in a polymer film and evidence of their cyclization (O→C) and cycloreversion (C→O) reactions induced by two-photon excitation were undertaken. For the development of a readout method, Resonance Energy Transfer (RET) from twophoton absorbing fluorene derivatives to photochromic compounds was investigated under one and two-photon excitation. The Förster's distances and critical acceptor concentrations were determined for non-bound donor-acceptor pairs in homogeneous molecular ensembles. To the best of my knowledge, modulation of the two-photon fluorescence emission of a dye by a photochromic diarylethene has not been reported as a mechanism to read the recorded information in a 3D optical data storage system. This system was demonstrated to be highly stable and suitable for recording data in thick storage media. The proposed RET-based readout method proved to be non-destructive (exhibiting a loss of the initial fluorescence emission less than 20% of the initial emission after 10,000 readout cycles). Potential application of this system in a rewritable-erasable optical data storage system was proved. As part of the strategy for the development of diarylethenes optimized for 3D optical data storage, derivatives containing π-conjugated fluorene molecules were synthesized and characterized. The final part of this reasearch demonstrated the photostability of fluorine derivatives showing strong molecular polarizability and high fluorescence quantum yields. These compounds are quite promising for application in RET-based two-photon 3D optical data storage. Hence, the photostability of these fluorene derivatives is a key parameter to establish, and facilitates their full utility in critical applications.
Show less - Date Issued
- 2007
- Identifier
- CFE0001662, ucf:47210
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0001662
- Title
- SINGLET OXYGEN GENERATION USING NEW FLUORENE-BASED PHOTOSENSITIZERS UNDER ONE- AND TWO-PHOTON EXCITATION.
- Creator
-
Andrasik, Stephen, Belfield, Kevin, University of Central Florida
- Abstract / Description
-
Molecular oxygen in its lowest electronically excited state plays an important roll in the field of chemistry. This excited state is often referred to as singlet oxygen and can be generated in a photosensitized process under one- or two-photon excitation of a photosensitizer. It is particularly useful in the field of photodynamic cancer therapy (PDT) where singlet oxygen formation can be used to destroy cancerous tumors. The use of two-photon activated photosensitizers possesses great...
Show moreMolecular oxygen in its lowest electronically excited state plays an important roll in the field of chemistry. This excited state is often referred to as singlet oxygen and can be generated in a photosensitized process under one- or two-photon excitation of a photosensitizer. It is particularly useful in the field of photodynamic cancer therapy (PDT) where singlet oxygen formation can be used to destroy cancerous tumors. The use of two-photon activated photosensitizers possesses great potential in the field of PDT since near-IR light is used to activate the sensitizer, resulting in deeper penetration of light into biological tissue, less photo-bleaching of the sensitizer, and greatly improved resolution of excitation. The synthesis and photophysical characterization of new fluorene-based photosensitizers for efficient singlet oxygen production were investigated. The spectral properties for singlet oxygen production were measured at room temperature and 77 K. Two-photon absorption (2PA) cross-sections of the fluorene derivatives were measured by the open aperture Z-scan method. The quantum yields of singlet oxygen generation under one- and two-photon excitation (ΦΔ and 2PAΦΔ, respectively) were determined by the direct measurement of singlet oxygen luminescence at ≈ 1270 nm. The values of ΦΔ were independent of excitation wavelength, ranging from 0.6 - 0.9. The singlet oxygen quantum yields under two-photon excitation were 2PAΦΔ ≈ ½ΦΔ, indicating that the two processes exhibited the same mechanism of singlet oxygen production, independent of the mechanism of photon absorption.
Show less - Date Issued
- 2007
- Identifier
- CFE0001860, ucf:47411
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0001860