View All Items

Title: Novel optical properties of metal nanostructures based on surface plasmons.
Creator: Wang, Haining, Zou, Shengli, Liao, Yi, Kolpashchikov, Dmitry, Gesquiere, Andre, Su, Ming, University of Central Florida
Abstract / Description: Surface plasmons have been attracted extensive interests in recent decades due to the novel properties in nanometer sized dimensions. My work focused on the novel optical properties of metal nanostructures based on surface plasmons using theoretical simulation methods. In the first part, we investigated metal nanofilms and nanorods and demonstrated that extremely low scattering efficiency, high absorption efficiency and propagation with long distance could be obtained by different metal...
Show moreSurface plasmons have been attracted extensive interests in recent decades due to the novel properties in nanometer sized dimensions. My work focused on the novel optical properties of metal nanostructures based on surface plasmons using theoretical simulation methods. In the first part, we investigated metal nanofilms and nanorods and demonstrated that extremely low scattering efficiency, high absorption efficiency and propagation with long distance could be obtained by different metal nanostructures. With a perforated silver film, we demonstrated that an extremely low scattering cross section with an efficiency of less than 1% can be achieved at tunable wavelengths with tunable widths. The resonance wavelength, width, and intensity are influenced by the shape, size and arrangement pattern of the holes, as well as the distance separating the holes along the polarization direction. The extremely low scattering could be used to obtain high absorption efficiency of a two-layer silver nanofilm. Using the discrete dipole approximation method, we achieved enhanced absorption efficiencies, which are close to 100%, at tunable wavelengths in a two-layer silver thin film. The film is composed of a 100 nm thick perforated layer facing the incident light and a 100 nm thick solid layer. Resonance wavelengths are determined by the distances between perforated holes in the first layer as well as the separation between two layers. The resonance wavelengths shift to red with increasing separation distance between two layers or the periodic distance of the hole arrays. Geometries of conical frustum shaped holes in the first layer are critical for the improved absorption efficiencies. When the hole bottom diameter equals the periodic distance and the upper diameter is about one-third of the bottom diameter, close to unit absorption efficiency can be obtained. We examined the electromagnetic wave propagation along a hollow silver nanorod with subwavelength dimensions. The calculations show that light may propagate along the hollow nanorod with growing intensities. The influences of the shape, dimension, and length of the rod on the resonance wavelength and the enhanced local electric field, |E|2, along the rod were investigated. In the second part, a generalized electrodynamics model is proposed to describe the enhancement and quenching of fluorescence signal of a dye molecule placed near a metal nanoparticle (NP). Both the size of the Au NPs and quantum yield of the dye molecule are crucial in determining the emission intensity of the molecule. Changing the size of the metal NP will alter the ratio of the scattering and absorption efficiencies of the metal NP and consequently result in different enhancement or quenching effect to the dye molecule. A dye molecule with a reduced quantum yield indicates that the non-radiative channel is dominant in the decay of the excited dye molecules and the amplification of the radiative decay rate will be easier. In general, the emission intensity will be quenched when the size of metal NP is small and the quantum yield of dye molecule is about unity. A significant enhancement factor will be obtained when the quantum yield of the molecule is small and the particle size is large. When the quantum yield of the dye molecule is less than 10-5, the model is simplified to the surface enhanced Raman scattering equation.
Show less
Date Issued: 2013
Identifier: CFE0004769, ucf:49786
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0004769

Title: PLASMON ENHANCED NEAR-FIELD INTERACTIONS IN SURFACE COUPLED NANOPARTICLE ARRAYS FOR INTEGRATED NANOPHOTONIC DEVICES.
Creator: Ghoshal, Amitabh, Kik, Pieter, University of Central Florida
Abstract / Description: The current thrust towards developing silicon compatible integrated nanophotonic devices is driven by need to overcome critical challenges in electronic circuit technology related to information bandwidth and thermal management. Surface plasmon nanophotonics represents a hybrid technology at the interface of optics and electronics that could address several of the existing challenges. Surface plasmons are electronic charge density waves that can occur at a metal-dielectric interface at...
Show moreThe current thrust towards developing silicon compatible integrated nanophotonic devices is driven by need to overcome critical challenges in electronic circuit technology related to information bandwidth and thermal management. Surface plasmon nanophotonics represents a hybrid technology at the interface of optics and electronics that could address several of the existing challenges. Surface plasmons are electronic charge density waves that can occur at a metal-dielectric interface at optical and infrared frequencies. Numerous plasmon based integrated optical devices such as waveguides, splitters, resonators and multimode interference devices have been developed, however no standard integrated device for coupling light into nanoscale optical circuits exists. In this thesis we experimentally and theoretically investigate the excitation of propagating surface plasmons via resonant metal nanoparticle arrays placed in close proximity to a metal surface. It is shown that this approach can lead to compact plasmon excitation devices. Full-field electromagnetic simulations of the optical illumination of metal nanoparticle arrays near a metal film reveal the presence of individual nanoparticle resonances and collective grating-like resonances related to propagating surface plasmons within the periodic array structure. Strong near-field coupling between the nanoparticle and grating resonances is observed, and is successfully described by a coupled oscillator model. Numerical simulations of the effect of nanoparticle size and shape on the excitation and dissipation of surface plasmons reveal that the optimum particle volume for efficient surface plasmon excitation depends sensitively on the particle shape. This observation is quantitatively explained in terms of the shape-dependent optical cross-section of the nanoparticles. Reflection measurements on nanoparticle arrays fabricated using electron-beam lithography confirm the predicted particle-grating interaction. An unexpected polarization-dependent splitting of the film-mediated collective resonance is successfully attributed to the existence of out-of plane polarization modes of the metal nanoparticles. In order to distinguish between the excitation of propagating surface plasmons and localized nanoparticle plasmons, spectrally resolved leakage radiation measurements are presented. Based on these measurements, a universally applicable method for measuring the wavelength dependent efficiency of coupling free-space radiation into guided surface plasmon modes on thin films is developed. Finally, it is shown that the resonantly enhanced near-field coupling the nanoparticles and the propagating surface plasmons can lead to optimized coupler device dimensions well below 10 microns.
Show less
Date Issued: 2010
Identifier: CFE0003091, ucf:48322
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0003091

Title: Mid-infrared plasmonics.
Creator: Khalilzadeh Rezaie, Farnood, Peale, Robert, Ishigami, Masa, Schoenfeld, Winston, Buchwald, Walter, Abdolvand, Reza, University of Central Florida
Abstract / Description: This dissertation reports investigations into materials for, and applications of, infrared surface plasmon polaritons (SPP). SPPs are inhomogeneous electromagnetic waves that are bound to the surface of a conductor. Tight confinement of electromagnetic energy, the primary virtue of SPPs for so-called (")plasmonic(") applications, requires plasma frequencies for the conductor near the intended infrared operational frequencies. This requires carrier concentrations that are much less than those...
Show moreThis dissertation reports investigations into materials for, and applications of, infrared surface plasmon polaritons (SPP). SPPs are inhomogeneous electromagnetic waves that are bound to the surface of a conductor. Tight confinement of electromagnetic energy, the primary virtue of SPPs for so-called (")plasmonic(") applications, requires plasma frequencies for the conductor near the intended infrared operational frequencies. This requires carrier concentrations that are much less than those of usual metals such as gold and silver. I have investigated the optical properties and SPP excitation resonances of two materials having infrared plasma frequencies, namely the semimetal bismuth and the transparent conducting fluorine-doped tin-oxide (FTO). The complex permittivity spectra for evaporated films of Bi were found to be distinctly different than earlier reports for crystal or polycrystalline films, and SPP excitation resonances on Bi-coated gratings were found to be disappointingly broad. Permittivity spectra for chemical spray deposited FTO were obtained to long-wave IR wavelengths for the first time, and nano-crystalline FTO-coated silicon lamellar gratings show remarkable conformity. SPP excitation resonances for FTO are more promising than for Bi. Thus, FTO appears to be a promising SPP host for infrared plasmonics, e.g. a planer waveguide plasmonic spectral sensor, whose design was elaborated and investigated as part of my research and which requires SPP-host coating on deep vertical side walls of a trench-like analyte interaction region. Additionally, FTO may serve as a useful conducting oxide for a near-IR plasmonic spectral imager that I have investigated theoretically.
Show less
Date Issued: 2015
Identifier: CFE0006222, ucf:51080
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0006222

Title: GOLD NANOPARTICLE GENERATION USING IN SITU REDUCTION ON A PHOTORESIST POLYMER SUBSTRATE.
Creator: Clukay, Christopher, Kuebler, Stephen, University of Central Florida
Abstract / Description: This report presents evidence that in-situ reduction of metal ions bound to a cross-linked polymer surface does not always result in nanoparticle formation solely at the interface, as is commonly assumed, but also as much as 40 nm deep within the polymer matrix. Tetrachloroaurate ions were bound using a variety of multi-functional amines to cured films of SU-8 -- a cross-linkable epoxide frequently used for micro- and nanofabrication -- and then treated using one of several reducing agents....
Show moreThis report presents evidence that in-situ reduction of metal ions bound to a cross-linked polymer surface does not always result in nanoparticle formation solely at the interface, as is commonly assumed, but also as much as 40 nm deep within the polymer matrix. Tetrachloroaurate ions were bound using a variety of multi-functional amines to cured films of SU-8 -- a cross-linkable epoxide frequently used for micro- and nanofabrication -- and then treated using one of several reducing agents. The resulting gold-nanoparticle decorated films were examined by X-ray photoelectron spectroscopy and by plan-view and cross-sectional transmission electron microscopy. Reduction using sodium borohydride or sodium citrate generates bands of interspersed particles as much as 40 nm deep within the polymer, suggesting both the Au(III) complex and the reducing agent are capable of penetrating the surface and affecting reduction and formation of nanoparticles within the polymer matrix. It is shown that nanoparticle formation can be confined nearer to the polymer interface by using hydroquinone, a sterically bulkier and less flexible reducing agent, or by reacting the surface in aqueous media with high molecular-weight multifunctional amines, that presumably confine Au(III) nearer to the true interface. These finding have important implications for technologies that apply surface bound nanoparticles, including electroless metallization, catalysis, nano-structure synthesis, and surface enhanced spectroscopy.
Show less
Date Issued: 2011
Identifier: CFH0004091, ucf:44794
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFH0004091

Title: INFRARED SURFACE PLASMON POLARITONS ON SEMICONDUCTOR, SEMIMETAL AND CONDUCTING POLYMER.
Creator: Shahzad, Monas, Peale, Robert, Heinrich, Helge, Coffey, Kevin, Diaz, Diego, University of Central Florida
Abstract / Description: Conductors with IR (infrared) plasma frequencies are potentially useful hosts of surface plasmon polaritons (SPPs) with subwavelength mode confinement for sensing applications. The underlying aim of this work is to identify such conductors that also have sharp SPP excitation resonances for biosensor applications at infrared (3-11 ?m) wavelengths, where biological analytes are strongly differentiated by their IR absorption spectra. In this work, various materials were investigated such as a...
Show moreConductors with IR (infrared) plasma frequencies are potentially useful hosts of surface plasmon polaritons (SPPs) with subwavelength mode confinement for sensing applications. The underlying aim of this work is to identify such conductors that also have sharp SPP excitation resonances for biosensor applications at infrared (3-11 ?m) wavelengths, where biological analytes are strongly differentiated by their IR absorption spectra. In this work, various materials were investigated such as a heavily doped semiconductor, a semimetal, a conducting polymer and its composite.Heavily doped silicon was investigated by tuning its plasma frequency to the infrared region by heavily doping. The measured complex permittivity spectra for p-type silicon with a carrier concentration of 6 (&)#215; 1019 and 6 (&)#215; 1020 cm-3 show that these materials support SPPs beyond 11 and 6 ?m wavelengths, respectively. SPP generation was observed in angular reflection spectra of doped-silicon gratings. Photon-to-plasmon coupling resonances, a necessary condition for sensing, were demonstrated near 10 ?m wavelength for the heaviest doped, and the observed resonances were confirmed theoretically using analytic calculations. The permittivity spectra were also used to calculate SPP mode heights above the silicon surface and SPP propagation lengths. Reasonable merit criteria applied to these quantities suggest that only the heaviest doped material has sensor potential, and then mainly within the wavelength range of 6 to 10 ?m. The semimetal bismuth (Bi) has an infrared plasmon frequency less than the infrared plasma frequency of noble metals such as gold and silver, which is one order of magnitude lower than their plasma frequencies. The excitation of IR surface plasmons on Bi lamellar gratings in the wavelength range of 3.4 (&)#181;m to 10.6 (&)#181;m was observed. Distinct SPP resonances were observed although the usual condition for bound SPP is not satisfied in this wavelength range because the real part of the permittivity is positive. The excitation of these resonances agrees theoretically with the electromagnetic surface waves called surface polaritons (SPs). The measured permittivity spectra were used to calculate the SP mode heights above the bismuth surface and SP propagation length, which satisfied our criteria for sensors.A conducting polymer and its composite with graphite were also investigated since their plasma frequency may lie in the infrared region. Polyaniline was chemically synthesized and doped with various acids to prepare its salt form. A composite material of polyaniline with colloidal and nano-graphite was also prepared. Optical constants were measured in the long wave infrared region (LWIR) and were used to calculate SPP propagation length and penetration depth. SPP resonance spectra were calculated and suggested that polyaniline and its composite can be used as a host with sufficient mode confinement for IR sensor application.
Show less
Date Issued: 2012
Identifier: CFE0004598, ucf:49215
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0004598

Title: Synthesis and Characterization of Antimicrobial Non-Color Forming Silica-Silver Nanocomposite.
Creator: Bazata, Joshua, Santra, Swadeshmukul, Moore, Sean, Jewett, Travis, University of Central Florida
Abstract / Description: Silver has been utilized for its antimicrobial properties for thousands of years in a variety of fields, extending the shelf life of food and water, rendering eating utensils sanitary, and more recently in biomedical applications such as silver based antiseptic creams. While effective as an antimicrobial agent at very low concentrations ((&)#181;g/mL), silver imparts a strong color to objects it is incorporated into, due to its high plasmonic efficiency. The goal of this study was to...
Show moreSilver has been utilized for its antimicrobial properties for thousands of years in a variety of fields, extending the shelf life of food and water, rendering eating utensils sanitary, and more recently in biomedical applications such as silver based antiseptic creams. While effective as an antimicrobial agent at very low concentrations ((&)#181;g/mL), silver imparts a strong color to objects it is incorporated into, due to its high plasmonic efficiency. The goal of this study was to determine if incorporating silver nanoparticles into a silica matrix could reduce or eliminate the plasmonic signal, while retaining the antimicrobial effects of the silver nanoparticles.Citrate capped silver nanoparticles (AgNP) were synthesized using a borohydride reduction method as outlined by Zheng et. al., and incorporated into silica nanoparticles using a method adapted from Fleger et. al. To test the antimicrobial efficacy of these synthesized silica coated silver nanoparticles (SiAgNP), minimum inhibitory concentration testing at three time points, 1, 4, and 8 hours, was carried out against E. coli and S. aureus using broth microdilution and Alamar Blue as an indicator of microbial growth. Efficacy was judged against uncoated AgNP and aqueous silver nitrate (AgNO3) solutions at equivalent Ag concentrations. Silica nanoparticles (SiNP) were utilized as a negative control. Further antimicrobial characterization using a bacterial viability assay revealed a time dependent killing trend in the SiAgNP, suggesting a controlled release of Ag+ from within the silica matrix. Efficacy of the SiAgNP was determined to fall between the most effective antimicrobial form of silver tested, AgNO3, and least effective, AgNP. However, the SiAgNP material exhibited no visible plasmon peak when UV-Visible spectrophotometric readings were taken, as well as remaining colorless when coated onto a ceramic substrate. Zeta potential revealed a high degree of colloidal stability of the SiAgNP. TEM imaging studies were carried out, verifying the presence of Ag within and on the silica nanoparticles, as well as the crystalline structure of the uncoated AgNP. It was determined that coating AgNP synthesized through borohydride reduction with silica through a St(&)#246;ber synthesis mechanism yields a material with enhanced antimicrobial effects compared to AgNP, but with no detectable plasmon signal, effectively producing a non-color forming silver based antimicrobial.
Show less
Date Issued: 2015
Identifier: CFE0006208, ucf:51097
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0006208

Title: The cytopathic activity of cholera toxin requires a threshold quantity of cytosolic toxin.
Creator: Bader, Carly, Teter, Kenneth, Zervos, Antonis, Jewett, Travis, Tatulian, Suren, University of Central Florida
Abstract / Description: Cholera toxin (CT), secreted from Vibrio cholerae, causes a massive fluid and electrolyte efflux in the small intestine that results in life-threatening diarrhea and dehydration which impacts 3-5 million people per year. CT is secreted into the intestinal lumen but acts within the cytosol of intestinal epithelial cells. CT is an AB5 toxin that has a catalytic A1 subunit and a cell binding B subunit. CT moves from the cell surface to the endoplasmic reticulum (ER) by retrograde transport. Much...
Show moreCholera toxin (CT), secreted from Vibrio cholerae, causes a massive fluid and electrolyte efflux in the small intestine that results in life-threatening diarrhea and dehydration which impacts 3-5 million people per year. CT is secreted into the intestinal lumen but acts within the cytosol of intestinal epithelial cells. CT is an AB5 toxin that has a catalytic A1 subunit and a cell binding B subunit. CT moves from the cell surface to the endoplasmic reticulum (ER) by retrograde transport. Much of the toxin is transported to the lysosomes for degradation, but a secondary pool of toxin is diverted to the Golgi apparatus and then to the ER. Here the A1 subunit detaches from the rest of the toxin and enters the cytosol. The disordered conformation of free CTA1 facilitates toxin export to the cytosol by activating a quality control mechanism known as ER-associated degradation. The return to a folded structure in the cytosol allows CTA1 to attain an active conformation for modification of its Gs? target through ADP-ribosylation. This modification locks the protein in an active state which stimulates adenylate cyclase and leads to elevated levels of cAMP. A chloride channel located in the apical enterocyte membrane opens in response to signaling events induced by these elevated cAMP levels. The osmotic movement of water into the intestinal lumen that results from the chloride efflux produces the characteristic profuse watery diarrhea that is seen in intoxicated individuals.The current model of intoxication proposes only one molecule of cytosolic toxin is required to affect host cells, making therapeutic treatment nearly impossible. However, based on emerging evidence, we hypothesize a threshold quantity of toxin must be present within the cytosol of the target cell in order to elicit a cytopathic effect. Using the method of surface plasmon resonance along with toxicity assays, I have, for the first time, directly measured the efficiency of toxin delivery to the cytosol and correlated the levels of cytosolic toxin to toxin activity. I have shown CTA1 delivery from the cell surface to the cytosol is an inefficient process with only 2.3 % of the surface bound CTA1 appearing in the cytosol after 2 hours of intoxication. I have also determined and a cytosolic quantity of more than approximately .05ng of cytosolic CTA1 must be reached in order to elicit a cytopathic effect. Furthermore, CTA1 must be continually delivered from the cell surface to the cytosol in order to overcome the constant proteasome-mediated clearance of cytosolic toxin. When toxin delivery to the cytosol was blocked, this allowed the host cell to de-activate Gs?, lower cAMP levels, and recover from intoxication. Our work thus indicates it is possible to treat cholera even after the onset of disease. These findings challenge the idea of irreversible cellular toxicity and open the possibility of post-intoxication treatment options.
Show less
Date Issued: 2013
Identifier: CFE0004810, ucf:49759
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0004810

Title: Light-Matter Interactions of Plasmonic Nanostructures.
Creator: Reed, Jennifer, Zou, Shengli, Belfield, Kevin, Zhai, Lei, Hernandez, Eloy, Vanstryland, Eric, University of Central Florida
Abstract / Description: Light interaction with matter has long been an area of interest throughout history, spanning many fields of study. In recent decades, the investigation of light-matter interactions with nanostructures has become an intense area of research in the field of photonics. Metallic nanostructures, in particular, are of interest due to the interesting properties that arise when interacting with light. The properties are a result of the excitation of surface plasmons which are the collective...
Show moreLight interaction with matter has long been an area of interest throughout history, spanning many fields of study. In recent decades, the investigation of light-matter interactions with nanostructures has become an intense area of research in the field of photonics. Metallic nanostructures, in particular, are of interest due to the interesting properties that arise when interacting with light. The properties are a result of the excitation of surface plasmons which are the collective oscillation of the conduction electrons in the metal. Since the conduction electrons can be thought of as harmonic oscillators, they are quantized in a similar fashion. Just as a photon is a quantum of oscillations of an electromagnetic field, the plasmon is a quantum of electron oscillations of a metal. There are three types of plasmons:1. Bulk plasmons, also called volume plasmons, are longitudinal density fluctuations which propagate through a bulk metal with an eigenfrequency of ?_p called the plasma frequency.2. Localized surface plasmons are non-propagating excitations of the conduction electrons of a metallic nanoparticle coupled to an electromagnetic field. 3. Surface plasmon polaritons are evanescent, dispersive propagating electromagnetic waves formed by a coupled state between a photon and the excitation of the surface plasmons. They propagate along the surface of a metal-dielectric interface with a broad spectrum of eigenfrequencies from ?=0 to ?= ?_p??2. Plasmonics is a subfield of photonics which focuses on the study of surface plasmons and the optical properties that result from light interacting with metal films and nanostructures on the deep subwavelength scale. In this thesis, plasmonic nanostructures are investigated for optical waveguides and other nanophotonic applications through computational simulations primarily base on electrodynamic theory. The theory was formulated by several key figures and established by James Clerk Maxwell after he published a set of relations which describe all classical electromagnetic phenomena, known as Maxwell's equations. Using methods based on Maxwell's equations, the optical properties of metallic nanostructures utilizing surface plasmons is explored. In Chapter 3, light propagation of bright and dark modes of a partially and fully illuminated silver nanorod is investigated for waveguide applications. Then, the origin of the Fano resonance line shape in the scattering spectra of a silver nanorod is investigated. Next, in Chapter 4, the reflection and transmission of a multilayer silver film is simulated to observe the effects of varying the dielectric media between the layers on light propagation. Building on the multilayer film work, metal-insulator-metal waveguides are explored by perforating holes in the bottom layer of a two layer a silver film to investigate the limits of subwavelength light trapping, confinement, and propagation. Lastly, in Chapter 5, the effect of surface plasmons on the propagation direction of electromagnetic wave around a spherical silver nanoparticle which shows an effective negative index of refraction is examined. In addition, light manipulation using a film of silver prisms with an effective negative index of refraction is also investigated. The silver prisms demonstrate polarization selective propagation for waveguide and optical filter applications. These studies provide insight into plasmonic mechanisms utilized to overcome the diffraction limit of light. Through better understanding of how to manipulating light with plasmonic nanostructures, further advancements in nanophotonic technologies for applications such as extremely subwavelength waveguides, sensitive optical detection, optical filters, polarizers, beam splitters, optical data storage devices, high speed data transmission, and integrated subwavelength photonic circuits can be achieved.
Show less
Date Issued: 2013
Identifier: CFE0005049, ucf:49964
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0005049

Title: INTEGRATED OPTICAL SPR (SURFACE PLASMON RESONANCE) SENSOR BASED ON OPTOELECTRONIC PLATFORM.
Creator: Bang, Hyungseok, LiKamWa, Patrick, University of Central Florida
Abstract / Description: Current major demands in SPR sensor development are system miniaturization and throughput improvement. Structuring an array of integrated optical SPR sensor heads on a semiconductor based optoelectronic platform could be a promising solution for those issues, since integrated optical waveguides have highly miniaturized dimension and the optoelectronic platform enables on-chip optical-to-electrical signal conversion. Utilizing a semiconductor based platform to achieve optoelectronic...
Show moreCurrent major demands in SPR sensor development are system miniaturization and throughput improvement. Structuring an array of integrated optical SPR sensor heads on a semiconductor based optoelectronic platform could be a promising solution for those issues, since integrated optical waveguides have highly miniaturized dimension and the optoelectronic platform enables on-chip optical-to-electrical signal conversion. Utilizing a semiconductor based platform to achieve optoelectronic functionality poses requirements to the senor head; the sensor head needs to have reasonably small size while it should have reasonable sensitivity and fabrication tolerance. This research proposes a novel type of SPR sensor head and demonstrates a fabricated device with an array of integrated optical SPR sensor heads endowed with optoelectronic functionality. The novel integrated optical SPR sensor head relies on mode conversion efficiency for its operational principle. The beauty of this type of sensor head is it can produce clear contrast in SPR spectrum with a highly miniaturized and simple structure, in contrast to several-millimeter-scale conventional absorption type or interferometer type sensor heads. The integrated optical SPR sensor with optoelectronic functionality has been realized by structuring a dielectric waveguide based SPR sensor head on a photodetector-integrated semiconductor substrate. A large number of unit sensors have been fabricated on a substrate with a batch fabrication process, which promises a high throughput SPR sensor system or low-priced disposable sensors.
Show less
Date Issued: 2008
Identifier: CFE0002312, ucf:47841
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0002312

Title: Synthesis, Characterization And Antibacterial Activity Of Silver Embedded Silica Nanoparticle/Nanogel Formulation.
Creator: Menezes, Roseline, Santra, Swadeshmukul, Naser, Saleh, Self, William, University of Central Florida
Abstract / Description: The antibacterial property of silver (Ag) has been known since ancient time. It is reported in the literature that silver nanoparticles (AgNPs) exhibit improved antibacterial properties in comparison to silver ions of equivalent metallic Ag concentration. Such improvement in antibacterial activities is due to the high surface area to volume ratio of AgNPs (which facilitates interaction with the bacterial cells), increased release of silver ions and direct intra-cellular uptake of AgNPs...
Show moreThe antibacterial property of silver (Ag) has been known since ancient time. It is reported in the literature that silver nanoparticles (AgNPs) exhibit improved antibacterial properties in comparison to silver ions of equivalent metallic Ag concentration. Such improvement in antibacterial activities is due to the high surface area to volume ratio of AgNPs (which facilitates interaction with the bacterial cells), increased release of silver ions and direct intra-cellular uptake of AgNPs leading to localized release of Ag ions. To date, over 300 consumer products containing AgNPs are available in the market and the inventory is rapidly expanding. The antibacterial efficacy is related to the loading of AgNPs (which controls availability of active Ag ions). It is perhaps challenging to increase AgNPs loading in consumer products without compromising its aesthetic appearance. AgNPs exhibit yellow-brown color due to strong Surface Plasmon Resonance (SPR) absorption; and therefore, it is expected that an increase in loading would change the color of AgNP-containing materials. For applications, such as creating a fast-acting touch-safe surface, higher loading of AgNPs is desirable. It is also desirable to obtain a non-color forming surface. To meet the demands of desirable higher loading of AgNPs and non-color forming surface, the objective of this study is to minimize SPR by engineering Ag containing nanomaterials for potential fast-acting spray-based applications. Within this thesis several reports have been made including synthesis, characterization and antibacterial properties of Ag-loaded silica nanoparticle/nanogel (AgSiNP/NG) material containing nanoformulations. The effects of nanoformulation pH and metallic Ag content on the SPR absorption and antibacterial properties have been studied. The AgSiNP/NG materials were synthesized using silica sol-gel technique at room temperature in water. The color formation of the AgSiNP/NG material was found to be dependent on silver ion loading (15.4 wt% and 42.3 wt %) as well as on the pH (pH 4.0 and pH 7.0). A number of material characterization techniques such as HRTEM, SEM and AFM were used to characterize particle size, crystalline and surface morphology in dry state. Dynamic light scattering (DLS) technique was used to characterize particle size and size distribution in solution. UV-VIS spectroscopy technique was applied to characterize Ag ions and AgNPs in the AgSiNP/NG material. Antibacterial studies were conducted against gram negative E.coli and gram positive B.subtilis and S.aureus. A number of qualitative (well diffusion, BacLightTM live-dead(&)#174; viability) and quantitative (turbidity, resazurin viability) assays were used for antibacterial studies. It was observed that lower pH and low Ag loading minimized SPR absorption, resulting in no yellow-brown color formation. The HRTEM confirmed the formation of ~5-25 nm size highly crystalline AgNPs which were coated with dielectric silica layer (silica gel). AFM, SEM and DLS studies confirmed formation of AgSiNPs in the range between 100 nm (-) 200 nm. The AgSiNP/NG material was effective against both gram-negative and gram-positive bacteria. Based on this research it is suggested that by coating AgNPs with a dielectric material (such as silica); it is possible to suppress SPR absorption.
Show less
Date Issued: 2011
Identifier: CFE0004483, ucf:49308
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0004483

Title: Thermally annealled plasmonic nanostructures.
Creator: Wang, Chaoming, Su, Ming, Coffey, Kevin, Chai, Xinqing, Schelling, Patrick, University of Central Florida
Abstract / Description: Localized surface plasmon resonance (LSPR) is induced in metal nanoparticles by resonance between incident photons and conduction electrons in nanoparticles. For noble metal nanoparticles, LSPR can lead to strong absorbance of ultraviolet-violet light. Although it is well known that LSPR depends on the size and shape of nanoparticles, the inter-particle spacing, the dielectric properties of metal and the surrounding medium, the temperature dependence of LSPR is not well understood. By...
Show moreLocalized surface plasmon resonance (LSPR) is induced in metal nanoparticles by resonance between incident photons and conduction electrons in nanoparticles. For noble metal nanoparticles, LSPR can lead to strong absorbance of ultraviolet-violet light. Although it is well known that LSPR depends on the size and shape of nanoparticles, the inter-particle spacing, the dielectric properties of metal and the surrounding medium, the temperature dependence of LSPR is not well understood. By thermally annealing gold nanoparticle arrays formed by nanosphere lithography, a shift of LSPR peak upon heating has been shown. The thermal characteristics of the plasmonic nanoparticles have been further used to detect chemicals such as explosive and mercury vapors, which allow direct visual observation of the presence of mercury vapor, as well as thermal desorption measurements.
Show less
Date Issued: 2012
Identifier: CFE0004454, ucf:49322
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0004454

Title: Experiments in Graphene and Plasmonics.
Creator: Smith, Christian, Ishigami, Masa, Peale, Robert, Mucciolo, Eduardo, Chanda, Debashis, University of Central Florida
Abstract / Description: Graphene nanoribbons, graphene based optical sensors, and grating based plasmonics are explored experimentally. Graphene nanoribbons exhibit highly insulating states that may allow for graphene based digital applications. We investigate the sensitivity of these states to local charged impurities in ultra high vacuum. We look into the possibility of isolating two-dimensional films of H-BN and BSCCO, and test for any interesting phenomena. We also assess graphene's applicability for optical...
Show moreGraphene nanoribbons, graphene based optical sensors, and grating based plasmonics are explored experimentally. Graphene nanoribbons exhibit highly insulating states that may allow for graphene based digital applications. We investigate the sensitivity of these states to local charged impurities in ultra high vacuum. We look into the possibility of isolating two-dimensional films of H-BN and BSCCO, and test for any interesting phenomena. We also assess graphene's applicability for optical sensing by implementing a new style of spectral detector. Utilizing surface plasmon excitations nearby a graphene field-effect transistor we are able to produce a detector with wavelength sensitivity and selectivity in the visible range. Finally, we study another plasmonic phenomenon, and observe the resonant enhancement of diffraction into a symmetry-prohibited order in silver gratings.
Show less
Date Issued: 2014
Identifier: CFE0005887, ucf:50874
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0005887

Title: Nanoplasmonics In Two-dimensional Dirac and Three-dimensional Metallic Nanostructure Systems.
Creator: Safaei, Alireza, Chanda, Debashis, Leuenberger, Michael, Mucciolo, Eduardo, Tetard, Laurene, Zhai, Lei, University of Central Florida
Abstract / Description: Surface plasmons are collective oscillation of electrons which are coupled to the incident electric field. Excitation of surface plasmon is a route to engineer the behavior of light in nanometer length scale and amplifying the light-matter interaction. This interaction is an outcome of near-field enhancement close to the metal surface which leads to plasmon damping through radiative decay to outgoing photons and nonradiative decay inside and on the surface of the material to create an...
Show moreSurface plasmons are collective oscillation of electrons which are coupled to the incident electric field. Excitation of surface plasmon is a route to engineer the behavior of light in nanometer length scale and amplifying the light-matter interaction. This interaction is an outcome of near-field enhancement close to the metal surface which leads to plasmon damping through radiative decay to outgoing photons and nonradiative decay inside and on the surface of the material to create an electron-hole pair via interband or intraband Landau damping. Plasmonics in Dirac systems such as graphene show novel features due to massless electrons and holes around the Dirac cones. Linear band structure of Dirac materials in the low-momentum limit gives rise to the unprecedented optical and electrical properties. Electronical tunability of the plasmon resonance frequency through applying a gate voltage, highly confined electric field, and low plasmon damping are the other special propoerties of the Dirac plasmons. In this work, I will summarize the theoretical and experimental aspects of the electrostatical tunable systems made from monolayer graphene working in mid-infrared regime. I will demonstrate how a cavity-coupled nanopatterned graphene excites Dirac plasmons and enhances the light-matter interaction. The resonance frequency of the Dirac plasmons is tunable by applying a gate voltage. I will show how different gate-dielectrics, and the external conditions like the polarization and angle of incident light affect on the optical response of the nanostructure systems. I will then show the application of these nanodevices in infrared detection at room temperature by using plasmon-assisted hot carriers generation. An asymmetric nanopatterned graphene shows a high responsivity at room temperature which is unprecedented. At the end, I will demonstrate the properties of surface plasmons on 3D noble metals and its applications in light-funneling, photodetection, and light-focusing.
Show less
Date Issued: 2019
Identifier: CFE0007904, ucf:52746
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0007904

Title: THREE-PHOTON ABSORPTION PROCESS IN ORGANIC DYES ENHANCED BY SURFACE PLASMON RESONANCE.
Creator: Cohanoschi, Ion, Hernandez, Florencio, University of Central Florida
Abstract / Description: Multi-photon absorption processes have received significant attention from the scientific community during the last decade, mainly because of their potential applications in optical limiting, data storage and biomedical fields. Perhaps, one of the most investigated processes studied so far has been two-photon absorption (2PA). These investigations have resulted in successful applications in all the fields mentioned above. However, 2PA present some limitations in the biomedical field when...
Show moreMulti-photon absorption processes have received significant attention from the scientific community during the last decade, mainly because of their potential applications in optical limiting, data storage and biomedical fields. Perhaps, one of the most investigated processes studied so far has been two-photon absorption (2PA). These investigations have resulted in successful applications in all the fields mentioned above. However, 2PA present some limitations in the biomedical field when pumping at typical 2PA wavelengths. In order to overcome these limitations, three-photon absorption (3PA) process has been proposed. However, 3PA in organic molecules has a disadvantage, typical values of σ3' are small (10-81 cm6s2/photon2), therefore, 3PA excitation requires high irradiances to induce the promotion of electrons from the ground state to the final excited state. To overcome this obstacle, specific molecules that exhibit large 3PA cross-section must be designed. Thus far, there is a lack of systematic studies that correlate 3PA processes with the molecular structure of organic compounds. In order to fill the existent gap in 3PA molecular engineering, in this dissertation we have investigated the structure/property relationship for a new family of fluorene derivatives with very high three-photon absorption cross-sections. We demonstrated that the symmetric intramolecular charge transfer as well as the -electron conjugation length enhances the 3PA cross-section of fluorene derivatives. In addition, we showed that the withdrawing electron character of the attractor groups in a pull-pull geometry proved greater 3PA cross-section. After looking for alternative ways to enhance the effective σ3' of organic molecules, we investigated the enhancement of two- and three-photon absorption processes by means of Surface Plasmon. We demonstrated an enhancement of the effective two- and three-photon absorption cross-section of an organic compound of 480 and 30 folds, respectively. We proved that the enhancement is a direct consequence of the electric field enhancement at a metal/buffer interface. Next, motivated by the demands for new materials with enhanced nonlinear optical properties, we studied the 3PA of Hematoporphyrin IX and J-aggregate supramolecular systems. As a result, we were able to propose the use of 3PA in photodynamic therapy using Photofrin, the only drug approved by the FDA for PDT.
Show less
Date Issued: 2006
Identifier: CFE0001362, ucf:46981
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0001362

Title: Development of a nano-sensing approach and a portable prototype for real-time detection and quantification of free mercury in stream-flow: combining science and engineering in pro of the environment.
Creator: Chemnasiri, Warinya, Hernandez, Florencio, Kuebler, Stephen, Zou, Shengli, Uribe Romo, Fernando, Huo, Qun, University of Central Florida
Abstract / Description: Mercury (Hg) is a well-known hazardous environmental contaminant existing in several forms, but all are toxic to human in one way or the others. Since Hg usually settles into water polluting the environment and accumulating in living organisms, it is crucial to monitor Hg levels in the aquatic ecosystem. Although there are many well established techniques currently used to detect Hg, most of them require elaborate and time-consuming sample preparation and pre-concentration procedures, as well...
Show moreMercury (Hg) is a well-known hazardous environmental contaminant existing in several forms, but all are toxic to human in one way or the others. Since Hg usually settles into water polluting the environment and accumulating in living organisms, it is crucial to monitor Hg levels in the aquatic ecosystem. Although there are many well established techniques currently used to detect Hg, most of them require elaborate and time-consuming sample preparation and pre-concentration procedures, as well as costly and bulky equipment that limit their practical application in the field. In order to overcome the existent limitations in Hg determination methods, Hernandez and co-workers proposed the first surface Plasmon resonance (SPR) (-) based Hg sensor using gold nanorods (AuNRs) that offers high sensitivity and selectivity, attributed to the strong affinity between Au and Hg. In this dissertation, I first present my contribution to the understanding of the effect of size and aspect ratio of AuNRs on the limit of detection (LOD) and the dynamic range (DR) of the SPR-based Hg sensor using the qualitative model. In this part I demonstrate how both sensitivity and DR can be improved simultaneously via a modified wet chemistry procedure. Then, I show our approach towards the immobilization of AuNRs silane coated glass slides to expand the application of the SPR-based Hg sensor to stream-flow. Finally, I present the design and fabrication of the first real prototype of the SPR-based Hg sensor, and its application in stream-flow detection and speciation of mercury in the environment. The outcomes of my research have resulted in an innovative real-time portable Hg sensor apparatus with the desired high sensitivity, selectivity and DR to be used in stream-flow applications in Oak Ridge National Labs sites.
Show less
Date Issued: 2015
Identifier: CFE0006283, ucf:51589
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0006283

Title: THEORETICAL TAILORING OF PERFORATED THIN SILVER FILMS FOR AFFINITY SURFACE PLASMON RESONANCE BIOSENSOR APPLICATIONS.
Creator: Gongora Jr., Renan, Zou, Shengli, University of Central Florida
Abstract / Description: Metallic films, in conjunction with biochemical-targeted probes, are expected to provide early diagnosis, targeted therapy and non-invasive monitoring for epidemiology applications. The resonance wavelength peaks, both plasmonic and Wood-Rayleigh Anomalies (WRAs), in the scattering spectra are affected by the metallic architecture. As of today, much research has been devoted to extinction efficiency in the plasmonic region. However, Wood Rayleigh Anomalies (WRAs) typically occur at...
Show moreMetallic films, in conjunction with biochemical-targeted probes, are expected to provide early diagnosis, targeted therapy and non-invasive monitoring for epidemiology applications. The resonance wavelength peaks, both plasmonic and Wood-Rayleigh Anomalies (WRAs), in the scattering spectra are affected by the metallic architecture. As of today, much research has been devoted to extinction efficiency in the plasmonic region. However, Wood Rayleigh Anomalies (WRAs) typically occur at wavelengths associated with the periodic distance of the structures. A significant number of papers have already focused on the plasmonic region of the visible spectrum, but a less explored area of research was presented here; the desired resonance wavelength region was 400-500nm, corresponding to the WRA for the silver film with perforated hole with a periodic distance of 400nm. Simulations obtained from the discrete dipole approximation (DDA) method, show sharp spectral bands (either high or low scattering efficiencies) in both wavelength regions of the visible spectrum simulated from Ag film with cylindrical hole arrays In addition, surprising results were obtained in the parallel scattering spectra,where the electric field is contained in the XY plane, when the angle between the metallic surface and the incident light was adjusted to 14 degrees; a bathochromic shift was observed for the WRA peak suggesting a hybrid resonance mode. Metallic films have the potential to be used in instrumental techniques for use as sensors, i.e. surface plasmon resonance affinity biosensors, but are not limited to such instrumental techniques. Although the research here was aimed towards affinity biosensors, other sensory designs can benefit from the optimized Ag film motifs. The intent of the study was to elucidate metal film motifs, when incorporated into instrumental analysis, allowing the quantification of genetic material in the visible region. Any research group that routinely benefits from quantification of various analytes in solution matrices will also benefit from this study, as there are a bewildering number of instrumental sensory methods and setups available.
Show less
Date Issued: 2014
Identifier: CFH0004538, ucf:45155
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFH0004538

Title: Cavity-Coupled Plasmonic Systems for Enhanced Light-Matter Interactions.
Creator: Vazquez-Guardado, Abraham, Chanda, Debashis, Christodoulides, Demetrios, Abouraddy, Ayman, Moharam, Jim, Leuenberger, Michael, University of Central Florida
Abstract / Description: Light-matter interaction is a pivotal effect that involves the synergetic interplay of electromag- netic fields with fundamental particles. In this regard localized surface plasmons (LSP) arise from coherent interaction of the electromagnetic field with the collective oscillation of free electrons in confined sub-wavelength environments. Their most attractive properties are strong field en- hancements at the near field, highly inhomogeneous, peculiar temporal and spatial distributions and...
Show moreLight-matter interaction is a pivotal effect that involves the synergetic interplay of electromag- netic fields with fundamental particles. In this regard localized surface plasmons (LSP) arise from coherent interaction of the electromagnetic field with the collective oscillation of free electrons in confined sub-wavelength environments. Their most attractive properties are strong field en- hancements at the near field, highly inhomogeneous, peculiar temporal and spatial distributions and unique polarization properties. LSP systems also offer a unique playground for fundamental electromagnetic physics where micro-scale systemic properties can be studied in the macro-scale. These important properties and opportunities are brought up in this work where I study hybrid cavity-coupled plasmonic systems in which the weak plasmonic element is far-field coupled with the photonic cavity by properly tuning its phase. In this work I preset the fundamental understand- ing of such a complex systems from the multi-resonance interaction picture along experimental demonstration. Using this platform and its intricate near fields I further demonstrate a novel mech- anism to generate superchiral light: a field polarization property that adds a degree of freedom to light-matter interactions at the nanoscale exploited in advanced sensing applications and surface effect processes. Finally, the detection of non-chiral analytes, such as proteins, neurotransmit- ters or nanoparticles, and more complex chiral analytes, such as proteins and its conformation states, amino acids or chiral molecules at low concentrations is demonstrated in several biosensing applications. The accompanied experiential demonstrations were accomplished using the nanoim- printing technique, which places the cavity-coupled hybrid plasmonic system as a unique platform towards realistic applications not limited by expensive lithographic techniques.
Show less
Date Issued: 2018
Identifier: CFE0007418, ucf:52708
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0007418

Title: DESIGN, FABRICATION, AND TESTING OF HIGH-TRANSPARENCY DEEP ULTRA-VIOLETCONTACTS USING SURFACE PLASMON COUPLING IN SUBWAVELENGTH ALUMINUM MESHES.
Creator: Mazuir, Clarisse, Schoenfeld, Winston, University of Central Florida
Abstract / Description: The present work aims at enhancing the external quantum efficiencies of ultra-violet (UV) sensitive photodetectors (PDs) and light emitting diodes (LEDs)for any light polarization. Deep UV solid state devices are made out of AlGaN or MgZnO and their performances suffer from the high resistivity of their p-doped regions. They require transparent p-contacts; yet the most commonly used transparent contacts have low transmission in the UV: indium tin oxide (ITO) and nickel-gold (Ni/Au 5/5 nms)...
Show moreThe present work aims at enhancing the external quantum efficiencies of ultra-violet (UV) sensitive photodetectors (PDs) and light emitting diodes (LEDs)for any light polarization. Deep UV solid state devices are made out of AlGaN or MgZnO and their performances suffer from the high resistivity of their p-doped regions. They require transparent p-contacts; yet the most commonly used transparent contacts have low transmission in the UV: indium tin oxide (ITO) and nickel-gold (Ni/Au 5/5 nms) transmit less than 50% and 30% respectively at 300 nm. Here we investigate the use of surface plasmons (SPs) to design transparent p-contacts for AlGaN devices in the deep UV region of the spectrum. The appeal of using surface plasmon coupling arose from the local electromagnetic field enhancement near the metal surface as well as the increase in interaction time between the field and semiconductor if placed on top of a semiconductor. An in/out-coupling mechanism is achieved by using a grating consisting of two perpendicularly oriented sets of parallel aluminum lines with periods as low as 250 nm. The incident light is first coupled into SPs at the air/aluminum interface which then re-radiate at the aluminum/AlGaN interface and the photons energy is transferred to SP polaritons (SPPs) and back to photons. High transmission can be achieved not only at normal incidence but for a wider range of incident angles. A finite difference time domain (FDTD) package from R-Soft was used to simulate and design such aluminum gratings with transparency as high as 100% with tunable peak wavelength, bandwidth and angular acceptance. A rigorous coupled wave analysis (RCWA) was developed in Matlab to validate the FDTD results. The high UV transparency meshes were then fabricated using an e-beam assisted lithography lift-off process. Their electrical and optical properties were investigated. The electrical characterization was very encouraging; the sheet resistances of these meshes were lower than those of the conventionally used transparent contacts. The optical transmissions were lower than expected and the causes for the lower measurements have been investigated. The aluminum oxidation, the large metal grain size and the line edge roughness were identified as the main factors of inconsistency and solutions are proposed to improve these shortcomings. The effect of aluminum oxidation was calculated and the passivation of aluminum with SiO2 was evaluated as a solution. A cold deposition of aluminum reduced the aluminum grain size from 60 nm to 20 nm and the roughness from 5 nm to 0.5 nm. Furthermore, replacing the conventional lift-off process by a dry back-etch process led to much smoother metal line edges and much high optical transparency. The optical measurements were consistent with the simulations. Therefore, reduced roughness and smooth metal line edges were found to be especially critical considerations for deep UV application of the meshes.
Show less
Date Issued: 2011
Identifier: CFE0003645, ucf:48893
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0003645

Surface Plasmon Resonance (3)	+ -
surface plasmon (3)	+ -
Infrared (2)	+ -
Plasmonics (2)	+ -
Surface plasmon (2)	+ -

nanoparticles (2)	+ -
Antibacterial studies (1)	+ -
Antimicrobial (1)	+ -
Biosensing (1)	+ -
Biosensors (1)	+ -
Computational Chemistry (1)	+ -
Conducting polymers (1)	+ -
Dirac plasmon (1)	+ -
Discrete Dipole Approximation (1)	+ -
Dopamine Sensing (1)	+ -
Enhanced Light-Matter Interaction (1)	+ -
Fano resonance (1)	+ -
Flat lens (1)	+ -
Forbidden Symmetry (1)	+ -
Gold nanorods (1)	+ -
Graphene (1)	+ -
Graphene Nanoribbons (1)	+ -
Hybrid Cavity-Coupled Plasmonic (1)	+ -
LED (1)	+ -
Light funneling (1)	+ -
Localized surface Plasmon resonance (1)	+ -
Localized surface plasmon resonance (1)	+ -
Mercury Sensor (1)	+ -
Mid-infrared (1)	+ -
Multi-photon induced fluorescence (1)	+ -

ETD Collection (16)	+ -
Honors Collection (2)	+ -

University of Central Florida (18)	+ -
Zou, Shengli (4)	+ -
Chanda, Debashis (3)	+ -
Peale, Robert (3)	+ -
Coffey, Kevin (2)	+ -

Hernandez, Florencio (2)	+ -
Ishigami, Masa (2)	+ -
Jewett, Travis (2)	+ -
Kuebler, Stephen (2)	+ -
Leuenberger, Michael (2)	+ -
Mucciolo, Eduardo (2)	+ -
Santra, Swadeshmukul (2)	+ -
Schoenfeld, Winston (2)	+ -
Su, Ming (2)	+ -
Zhai, Lei (2)	+ -
Abdolvand, Reza (1)	+ -
Abouraddy, Ayman (1)	+ -
Bader, Carly (1)	+ -
Bang, Hyungseok (1)	+ -
Bazata, Joshua (1)	+ -
Belfield, Kevin (1)	+ -
Buchwald, Walter (1)	+ -
Chai, Xinqing (1)	+ -
Chemnasiri, Warinya (1)	+ -
Christodoulides, Demetrios (1)	+ -
Clukay, Christopher (1)	+ -
Cohanoschi, Ion (1)	+ -
Diaz, Diego (1)	+ -
Gesquiere, Andre (1)	+ -
Ghoshal, Amitabh (1)	+ -

Search In

Sort Results By:

Narrow results by:

Topical Subject

Collection

Type of Resource

Language

Creator

Format

Owner