Current Search: Vibrations (x)
View All Items
Pages
- Title
- Energy Harvesting toward the Vibration Reduction of Turbomachinery Blades via Resonance Frequency Detuning.
- Creator
-
Hynds, Taylor, Kauffman, Jeffrey, Das, Tuhin, Raghavan, Seetha, University of Central Florida
- Abstract / Description
-
Piezoelectric-based energy harvesting devices provide an attractive approach to powering remote devices as ambient mechanical energy from vibrations is converted to electrical energy. These devices have numerous potential applications, including actuation, sensing, structural health monitoring, and vibration control -- the latter of which is of particular interest here. This work seeks to develop an understanding of energy harvesting behavior within the framework of a semi-active technique...
Show morePiezoelectric-based energy harvesting devices provide an attractive approach to powering remote devices as ambient mechanical energy from vibrations is converted to electrical energy. These devices have numerous potential applications, including actuation, sensing, structural health monitoring, and vibration control -- the latter of which is of particular interest here. This work seeks to develop an understanding of energy harvesting behavior within the framework of a semi-active technique for reducing turbomachinery blade vibrations, namely resonance frequency detuning. In contrast with the bulk of energy harvesting research, this effort is not focused on maximizing the power output of the system, but rather providing the low power levels required by resonance frequency detuning. The demands of this technique dictate that harvesting conditions will be far from optimal, requiring that many common assumptions in conventional energy harvesting research be relaxed.Resonance frequency detuning has been proposed as a result of recent advances in turbomachinery blade design that have, while improving their overall efficiency, led to significantly reduced damping and thus large vibratory stresses. This technique uses piezoelectric materials to control the stiffness, and thus resonance frequency, of a blade as the excitation frequency sweeps through resonance. By detuning a structure's resonance frequency from that of the excitation, the overall peak response can be reduced, delaying high cycle fatigue and extending the lifetime of a blade. Additional benefits include reduced weight, drag, and noise levels as reduced vibratory stresses allow for increasingly light blade construction.As resonance frequency detuning is most effective when the stiffness states are well separated, it is necessary to harvested at nominally open- and short-circuit states, corresponding to the largest separation in stiffness states. This presents a problem from a harvesting standpoint however, as open- and short-circuit correspond to zero charge displacement and zero voltage, respectively, and thus there is no energy flow. It is, then, desirable to operate as near these conditions as possible while still harvesting sufficient energy to provide the power for state-switching. In this research a metric is developed to study the relationship between harvested power and structural stiffness, and a key result is that appreciable energy can be harvested far from the usual optimal conditions in a typical energy harvesting approach. Indeed, sufficient energy is available to power the on-blade control while essentially maintaining the desired stiffness states for detuning. Furthermore, it is shown that the optimal switch in the control law for resonance frequency detuning may be triggered by a threshold harvested power, requiring minimal on-blade processing. This is an attractive idea for implementing a vibration control system on-blade, as size limitations encourage removing the need for additional sensing and signal processing hardware.
Show less - Date Issued
- 2015
- Identifier
- CFE0005811, ucf:50039
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0005811
- Title
- The Effect of Vibrations on Cryogens Boil Off During Launch, Transfer and Transport.
- Creator
-
Schlichenmaier, Erin, Chow, Louis, Kauffman, Jeffrey, Raghavan, Seetha, University of Central Florida
- Abstract / Description
-
Boil-off of a cryogenic fluid which is caused by the temperature difference between the fluid and its environment is a phenomenon which has long been studied and is well understood. However, vibrational excitation of a cryogenic storage tank and the fluid inside it also play a role in the loss of cryogens. Mechanical energy applied to the system in the form of vibrational input is converted into thermal energy via viscous damping of the fluid. As a result, when a storage tank full of...
Show moreBoil-off of a cryogenic fluid which is caused by the temperature difference between the fluid and its environment is a phenomenon which has long been studied and is well understood. However, vibrational excitation of a cryogenic storage tank and the fluid inside it also play a role in the loss of cryogens. Mechanical energy applied to the system in the form of vibrational input is converted into thermal energy via viscous damping of the fluid. As a result, when a storage tank full of cryogenic fluids is vibrated, it boils off at an increased rate.A series of experiments were performed in which a cryogenic storage Dewar filled with liquid nitrogen was subjected to vibrational input and the rate of boil-off was measured. Based on the results of the testing, it has been determined that the rate of boil-off of a cryogenic fluid increases by a factor of up to five times the resting boil off rate during the application of vibrational energy. The development of advanced cryogenic storage systems capable of reducing vibrational loading of the fluid could significantly decrease the loss of cryogens during procedures such as transporting and storing the fluid or launching a space vehicle.
Show less - Date Issued
- 2016
- Identifier
- CFE0006389, ucf:51529
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0006389
- Title
- VIBRATION ANALYSIS OF CARBON NANOTUBE USING CONTINUUM MODEL AND FINITE ELEMENT MODEL.
- Creator
-
Subramaniam , Hari, Wang, Quan, University of Central Florida
- Abstract / Description
-
The main objective of the thesis is to propose the methods of determining vibration behavior of carbon nanotubes (CNTs) using continuum models and finite element models. Secondary objective is to find the effect of van der Waals force on vibration of multiwalled carbon nanotubes . The study of vibration behavior of CNTs is important because of their potential engineering applications such as nano-mechanical resonators and tips of scanning probe instruments where they are subjected to...
Show moreThe main objective of the thesis is to propose the methods of determining vibration behavior of carbon nanotubes (CNTs) using continuum models and finite element models. Secondary objective is to find the effect of van der Waals force on vibration of multiwalled carbon nanotubes . The study of vibration behavior of CNTs is important because of their potential engineering applications such as nano-mechanical resonators and tips of scanning probe instruments where they are subjected to mechanical vibrations. Continuum modeling is based on an elastic beam model. The interlayer van der Waals interactions are represented by Lennard-Jones potential. In finite element modeling, single walled nanotubes (SWNTs) are modeled as finite beam elements and multi-walled nanotubes (MWNTs) as finite solid elements. The interlayer van der Waals interactions are simulated by distributed springs. The proposed finite element approach and continuum approach for vibration analysis of CNTs are verified by comparing the results with experimental and analytical results available in the literature. The results from both continuum and finite element modeling show that the effect of van der Waals force on vibration of MWNTs are high for smaller aspect ratios irrespective of boundary conditions and number of layers; fixed nanotube than cantilever nanotube for the same dimensions ; five-walled nanotube than a double walled nanotube for the same aspect ratio.
Show less - Date Issued
- 2005
- Identifier
- CFE0000735, ucf:46555
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0000735
- Title
- DYNAMIC RESPONSE OF A MULTI-SPAN CURVED BEAM FROM MOVING TRANSVERSE POINT LOADS.
- Creator
-
Alexander, Amanda, Kauffman, Jeffrey, University of Central Florida
- Abstract / Description
-
This thesis describes how to evaluate a first-order approximation of the vibration induced on a beam that is vertically curved and experiences a moving load of non-constant velocity. The curved beam is applicable in the example of a roller coaster. The present research in the field does not consider a curved beam nor can similar research be applied to such a beam. The complexity of the vibration of a curved beam lies primarily in the description of the variable magnitude of the moving load...
Show moreThis thesis describes how to evaluate a first-order approximation of the vibration induced on a beam that is vertically curved and experiences a moving load of non-constant velocity. The curved beam is applicable in the example of a roller coaster. The present research in the field does not consider a curved beam nor can similar research be applied to such a beam. The complexity of the vibration of a curved beam lies primarily in the description of the variable magnitude of the moving load applied. Furthermore, this motion is also variable. This thesis will present how this beam will displace in response to the moving load. The model presented can be easily manipulated as it considers most variables to be functions of time or space. The model will be compared to existing research on linear beams to ensure the unique response of a curved beam.
Show less - Date Issued
- 2015
- Identifier
- CFH0004739, ucf:45349
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFH0004739
- Title
- STRUCTURAL HEALTH MONITORING OF A STADIUM FOR EVALUATING HUMAN COMFORT AND STRUCTURAL PERFORMANCE.
- Creator
-
Sazak, Hasan, Catbas, F. Necati, University of Central Florida
- Abstract / Description
-
Light and rapid constructions as well as considerations such as improved line of sight and increased capacity for modern stadium structures make them vulnerable for vibration serviceability problems. These problems are also observed at convention centers, large shopping malls, concert halls and ballrooms. Especially when the individuals in a crowd are involved in some sort of coordinated motion, this type of loading creates the most potential for high levels of vibration. In order to...
Show moreLight and rapid constructions as well as considerations such as improved line of sight and increased capacity for modern stadium structures make them vulnerable for vibration serviceability problems. These problems are also observed at convention centers, large shopping malls, concert halls and ballrooms. Especially when the individuals in a crowd are involved in some sort of coordinated motion, this type of loading creates the most potential for high levels of vibration. In order to understand the causes of vibration, vibration levels, service and safety levels, Structural Health Monitoring (SHM) can be implemented to track and evaluate performance of a structure during events such as games at football stadia. SHM becomes a critical need especially when decisions such as repair and retrofit are to be made for the structure. The main objectives of this study are a) to determine the impact of vibration to human comfort levels; b) to identify dynamic loading for the coordinated motion; c) to determine the structural performance by means of a detailed model validated using experimental data. In order to achieve these objectives, a football stadium was monitored for three years to establish the vibration levels during different games and different events in each game such as goals, interceptions, playing a particular song. It is seen that certain events and long periods of playing particular songs induced vibration levels that are at the threshold of human comfort based on the design codes. To simulate the crowd motion due to this song, a laboratory study was designed and conducted to experimentally determine the forcing functions due to jumping with the rhythm of the song. The spectral analysis of the stadium data and the song also revealed that the first mode frequency of the stadium and the dominant frequency of the music are very close, creating resonance conditions. Further investigative studies were conducted by developing a finite element (FE) model of the stadium, which was validated using the results of the modal analysis from the ambient vibration data. Subsequently, the FE model was employed to simulate forcing functions obtained from the laboratory studies to explore the vibration levels, dynamic response as well as the response of the structure when it is retrofitted by additional elements. In addition, different aspects of model development, with respect to the physical model of the stadium were outlined in terms of design considerations, instrumentation, finite element modeling, and simulating dynamic effect of spectators. Finally, the effectiveness of the retrofit by adding elements to the steel structure of the stadium was explored by simulating the crowd motion with the FE model.
Show less - Date Issued
- 2010
- Identifier
- CFE0003387, ucf:48470
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0003387
- Title
- Spatial and Temporal Compressive Sensing for Vibration-based Monitoring: Fundamental Studies with Beam Vibrations.
- Creator
-
Ganesan, Vaahini, Das, Tuhin, Kauffman, Jeffrey L., Raghavan, Seetha, University of Central Florida
- Abstract / Description
-
Vibration data from mechanical systems carry important information that is useful for characterization and diagnosis. Standard approaches rely on continually streaming data at a fixed sampling frequency. For applications involving continuous monitoring, such as Structural Health Monitoring (SHM), such approaches result in high data volume and require powering sensors for prolonged duration. Furthermore, adequate spatial resolution, typically involves instrumenting structures with a large...
Show moreVibration data from mechanical systems carry important information that is useful for characterization and diagnosis. Standard approaches rely on continually streaming data at a fixed sampling frequency. For applications involving continuous monitoring, such as Structural Health Monitoring (SHM), such approaches result in high data volume and require powering sensors for prolonged duration. Furthermore, adequate spatial resolution, typically involves instrumenting structures with a large array of sensors. This research shows that applying Compressive Sensing (CS) can significantly reduce both the volume of data and number of sensors in vibration monitoring applications. Random sampling and the inherent sparsity of vibration signals in the frequency domain enables this reduction. Additionally, by exploiting the sparsity of mode shapes, CS can also enable efficient spatial reconstruction using fewer spatially distributed sensors than a traditional approach. CS can thereby reduce the cost and power requirement of sensing as well as streamline data storage and processing in monitoring applications. In well-instrumented structures, CS can enable continuous monitoring in case of sensor or computational failures. The scope of this research was to establish CS as a viable method for SHM with application to beam vibrations. Finite element based simulations demonstrated CS-based frequency recovery from free vibration response of simply supported, fixed-fixed and cantilever beams. Specifically, CS was used to detect shift in natural frequencies of vibration due to structural change using considerably less data than required by traditional sampling. Experimental results using a cantilever beam provided further insight into this approach. In the experimental study, impulse response of the beam was used to recover natural frequencies of vibration with CS. It was shown that CS could discern changes in natural frequencies under modified beam parameters. When the basis functions were modified to accommodate the effect of damping, the performance of CS-based recovery further improved. Effect of noise in CS-based frequency recovery was also studied. In addition to incorporating damping, formulating noise-handling as a part of the CS algorithm for beam vibrations facilitated detecting shift in frequencies from even fewer samples. In the spatial domain, CS was primarily developed to focus on image processing applications, where the signals and basis functions are very different from those required for mechanical beam vibrations. Therefore, it mandated reformulation of the CS problem that would handle related challenges and enable the reconstruction of spatial beam response using very few sensor data. Specifically, this research addresses CS-based reconstruction of deflection shape of beams with fixed boundary conditions. Presence of a fixed end makes hyperbolic terms indispensable in the basis, which in turn causes numerical inconsistencies. Two approaches are discussed to mitigate this problem. The first approach is to restrict the hyperbolic terms in the basis to lower frequencies to ensure well conditioning. The second, a more systematic approach, is to generate an augmented basis function that will combine harmonic and hyperbolic terms. At higher frequencies, the combined hyperbolic terms will limit each other's magnitude, thus ensuring boundedness. This research thus lays the foundation for formulating the CS problem for the field of mechanical vibrations. It presents fundamental studies and discusses open-ended challenges while implementing CS to this field that will pave way for further research.
Show less - Date Issued
- 2017
- Identifier
- CFE0007120, ucf:51954
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0007120
- Title
- Detection of DDH in Infants and Children Using Audible Acoustics.
- Creator
-
Hassan, Tanvir, Mansy, Hansen, Song, Sang-Eun, Kassab, Alain, University of Central Florida
- Abstract / Description
-
Detection of developmental dysplasia of the hip (DDH) in infants and children is important as it leads to permanent hip instability. Current methods for detecting DDH, such as ultrasound and x-rays, are relatively expensive and need qualified medical personnel to administer the test. Furthermore, x-ray ionizing radiation can have potential harmful effects. In the current study, an acoustic non-invasive and simple approach was investigated for detection of DDH. Different benchtop simplified...
Show moreDetection of developmental dysplasia of the hip (DDH) in infants and children is important as it leads to permanent hip instability. Current methods for detecting DDH, such as ultrasound and x-rays, are relatively expensive and need qualified medical personnel to administer the test. Furthermore, x-ray ionizing radiation can have potential harmful effects. In the current study, an acoustic non-invasive and simple approach was investigated for detection of DDH. Different benchtop simplified models and pig models were constructed and tested. Models were stimulated with band-limited white acoustic noise (10-2500 Hz) and the response of the models was measured. The power spectrum density, transfer function, and coherence were determined for different hip dysplasia levels and for normal cases. Results showed that the power spectrum density, transfer function, and coherence were affected by dysplasia occurrence. Effects appear larger for more severe dysplastic hips. This suggests that the proposed approach may have potential for DDH detection.
Show less - Date Issued
- 2019
- Identifier
- CFE0007816, ucf:52350
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0007816
- Title
- The Effect of Magnetic Bearing on the Vibration and Friction of a Wind Turbine.
- Creator
-
Vorwaller, Mark, Lin, Kuo-Chi, Raghavan, Seetha, Gou, Jihua, University of Central Florida
- Abstract / Description
-
Demands for sustainable energy have resulted in increased interest in wind turbines. Thus, despite widespread economic difficulties, global installed wind power increased by over 20% in 2011 alone. Recently, magnetic bearing technology has been proposed to improve wind turbine performance by mitigating vibration and reducing frictional losses. While magnetic bearing has been shown to reduce friction in other applications, little data has been presented to establish its effect on vibration and...
Show moreDemands for sustainable energy have resulted in increased interest in wind turbines. Thus, despite widespread economic difficulties, global installed wind power increased by over 20% in 2011 alone. Recently, magnetic bearing technology has been proposed to improve wind turbine performance by mitigating vibration and reducing frictional losses. While magnetic bearing has been shown to reduce friction in other applications, little data has been presented to establish its effect on vibration and friction in wind turbines. Accordingly, this study provides a functional method for experimentally evaluating the effect of a magnetic bearing on the vibration and efficiency characteristics of a wind turbine, along with associated results and conclusions.The magnetic bearing under examination is a passive, concentric ring design. Vibration levels, dominant frequency components, and efficiency results are reported for the bearing as tested in two systems: a precision test fixture, and a small commercially available wind turbine. Data is also presented for a geometrically equivalent ball bearing, providing a benchmark for the magnetic bearing's performance. The magnetic bearing is conclusively shown to reduce frictional losses as predicted by the original hypothesis. However, while reducing vibration in the precision test fixture, the magnetic bearing demonstrates increased vibration in the small wind turbine. This is explained in terms of the stiffness and damping of the passive test bearing. Thus, magnetic bearing technology promises to improve wind turbine performance, provided that application specific stiffness and damping characteristics are considered in the bearing design.
Show less - Date Issued
- 2012
- Identifier
- CFE0004452, ucf:49326
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0004452
- Title
- Determination of Frequency-Based Switch Triggers for Optimal Vibration Reduction via Resonance Frequency Detuning.
- Creator
-
Lopp, Garrett, Kauffman, Jeffrey, Das, Tuhin, Xu, Yunjun, University of Central Florida
- Abstract / Description
-
Resonance frequency detuning (RFD) is a piezoelectric-based vibration reduction approach that applies to systems experiencing transient excitation through the system's resonance(-)for example, turbomachinery experiencing changes in rotation speed, such as on spool-up and spool-down. This technique relies on the inclusion of piezoelectric material and manipulation of its electrical boundary conditions, which control the stiffness of the piezoelectric material. Resonance frequency detuning...
Show moreResonance frequency detuning (RFD) is a piezoelectric-based vibration reduction approach that applies to systems experiencing transient excitation through the system's resonance(-)for example, turbomachinery experiencing changes in rotation speed, such as on spool-up and spool-down. This technique relies on the inclusion of piezoelectric material and manipulation of its electrical boundary conditions, which control the stiffness of the piezoelectric material. Resonance frequency detuning exploits this effect by intelligently switching between the open-circuit (high stiffness) and short-circuit (low stiffness) conditions as the excitation approaches resonance, subsequently shifting the natural frequency to avoid this resonance crossing and limit the response. The peak response dynamics are then determined by the system's sweep rate, modal damping ratio, electromechanical coupling coefficient, and, most importantly, the trigger (represented here in terms of excitation frequency) that initiates the stiffness state switch. This thesis identifies the optimal frequency-based switch trigger over a range of sweep rates, damping ratios, and electromechanical coupling coefficients. With perfect knowledge of the system, the optimal frequency-based switch trigger decreases approximately linearly with the square of the coupling coefficient. Furthermore, phase of vibration at the time of the switch has a very small effect; switching on peak strain energy is marginally optimal. In practice, perfect knowledge is unrealistic and an alternate switch trigger based on an easily measurable parameter is necessary. As such, this thesis also investigates potential methods using the open-circuit piezoelectric voltage response envelope and its derivatives. The optimal switch triggers collapse to a near linear trend when measured against the response envelope derivatives and, subsequently, an empirical control law is extracted. This control law agrees well with and produces a comparable response to that of the optimal control determined using perfect and complete knowledge of the system.
Show less - Date Issued
- 2015
- Identifier
- CFE0005829, ucf:50909
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0005829
- Title
- MODELING FINANCIAL MARKETS USING CONCEPTS FROM MECHANICAL VIBRATIONS AND MASS-SPRING SYSTEMS.
- Creator
-
Gandia, Michael, Das, Tuhin, University of Central Florida
- Abstract / Description
-
This thesis describes a method of modeling financial markets by utilizing concepts from mechanical vibration. The models developed represent multi-degree of freedom, mass-spring systems. The economic principles that drive the design are supply and demand, which act as springs, and shareholders, which act as masses. The primary assumption of this research is that events cannot be predicted but the responses to those events can be. In other words, economic stimuli create responses to a stock's...
Show moreThis thesis describes a method of modeling financial markets by utilizing concepts from mechanical vibration. The models developed represent multi-degree of freedom, mass-spring systems. The economic principles that drive the design are supply and demand, which act as springs, and shareholders, which act as masses. The primary assumption of this research is that events cannot be predicted but the responses to those events can be. In other words, economic stimuli create responses to a stock's price that is predictable, repeatable and scientific. The approach to determining the behavior of various financial markets encompassed techniques such as Fast Fourier Transform and discretized wavelet analysis. The researched developed in three stages; first an appropriate model of causation in the stock market was established. Second, a model of steady state properties was determined. Third, experiments were conducted to determine the most effective model and to test its predictive capabilities on ten stocks. The experiments were evaluated based on the model's hypothetical return on investment. The results showed a positive gain on capital for nine out of the ten stocks and supported the claim that stocks behave in accordance to the natural laws of vibration. As scientific approaches to modeling the stock market are beginning to develop, engineering principles are proving to be the most relevant and reliable means of financial market prediction.
Show less - Date Issued
- 2014
- Identifier
- CFH0004657, ucf:45283
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFH0004657
- Title
- NOISE CHARACERIZATION FOR PROPOSED UCF PHYISCAL SCIENCE BUILDING SITES.
- Creator
-
Martinez, Jorge, Peale, Robert, University of Central Florida
- Abstract / Description
-
Today's Advance Technology Facilities require low noise levels and increased noise monitoring. Ambient noise can interfere with the accuracy and precision of experiments and manufacturing processes. Therefore preconstruction site surveys are needed to develop strategies for mitigating noise. Vibration and low frequency electromagnetic fields are particularly detrimental for sensitive instruments, and they are also difficult to mitigate. However a large part of these costs can be avoided...
Show moreToday's Advance Technology Facilities require low noise levels and increased noise monitoring. Ambient noise can interfere with the accuracy and precision of experiments and manufacturing processes. Therefore preconstruction site surveys are needed to develop strategies for mitigating noise. Vibration and low frequency electromagnetic fields are particularly detrimental for sensitive instruments, and they are also difficult to mitigate. However a large part of these costs can be avoided or minimized if a quiet building site is selected in the first place. Accelerometers and gauss meters combined with a computer for acquisition and analysis provide a low cost method of evaluating noise levels at proposed building sites. This work examines low frequency vibration and electromagnetic fields at two proposed sites for the planned Physical Science Building at the University of Central Florida.
Show less - Date Issued
- 2006
- Identifier
- CFE0001507, ucf:47156
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0001507
- Title
- Characterization, Classification, and Genesis of Seismocardiographic Signals.
- Creator
-
Taebi, Amirtaha, Mansy, Hansen, Kassab, Alain, Huang, Helen, Vosoughi, Azadeh, University of Central Florida
- Abstract / Description
-
Seismocardiographic (SCG) signals are the acoustic and vibration induced by cardiac activity measured non-invasively at the chest surface. These signals may offer a method for diagnosing and monitoring heart function. Successful classification of SCG signals in health and disease depends on accurate signal characterization and feature extraction.In this study, SCG signal features were extracted in the time, frequency, and time-frequency domains. Different methods for estimating time-frequency...
Show moreSeismocardiographic (SCG) signals are the acoustic and vibration induced by cardiac activity measured non-invasively at the chest surface. These signals may offer a method for diagnosing and monitoring heart function. Successful classification of SCG signals in health and disease depends on accurate signal characterization and feature extraction.In this study, SCG signal features were extracted in the time, frequency, and time-frequency domains. Different methods for estimating time-frequency features of SCG were investigated. Results suggested that the polynomial chirplet transform outperformed wavelet and short time Fourier transforms.Many factors may contribute to increasing intrasubject SCG variability including subject posture and respiratory phase. In this study, the effect of respiration on SCG signal variability was investigated. Results suggested that SCG waveforms can vary with lung volume, respiratory flow direction, or a combination of these criteria. SCG events were classified into groups belonging to these different respiration phases using classifiers, including artificial neural networks, support vector machines, and random forest. Categorizing SCG events into different groups containing similar events allows more accurate estimation of SCG features.SCG feature points were also identified from simultaneous measurements of SCG and other well-known physiologic signals including electrocardiography, phonocardiography, and echocardiography. Future work may use this information to get more insights into the genesis of SCG.
Show less - Date Issued
- 2018
- Identifier
- CFE0007106, ucf:51944
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0007106
- Title
- STRUCTURAL ANALYSIS AND ACTIVE VIBRATION CONTROL OF TETRAFORM SPACE FRAME FOR USE IN MICRO-SCALE MACHINING.
- Creator
-
Knipe, Kevin, Xu, Chengying, University of Central Florida
- Abstract / Description
-
This research thesis aims to achieve the structural analysis and active vibration damping of the Tetraform machining structure. The Tetraform is a space frame made up of four equilateral triangles with spherical masses at the four vertices. This frame was originally developed for grinding of optical lenses and is now being adapted for use in micro-precision milling. The Tetraform is beneficial to the milling process due to its exceptionally high dynamic stiffness characteristics, which...
Show moreThis research thesis aims to achieve the structural analysis and active vibration damping of the Tetraform machining structure. The Tetraform is a space frame made up of four equilateral triangles with spherical masses at the four vertices. This frame was originally developed for grinding of optical lenses and is now being adapted for use in micro-precision milling. The Tetraform is beneficial to the milling process due to its exceptionally high dynamic stiffness characteristics, which increases the machining stability and allows for higher material removal rates and accuracy. However, there are still some modes of vibration that are critical to the milling process and need to be dampened out. Under operating conditions of many structures, resonant modes of vibration can easily be excited which often lead to structural failure or significant reduction in operating performance. For the milling application, resonant frequencies of the machining structure can severely limit the milling process. The goal of the presented research is to increase surface and subsurface integrity with optimal material removal rate and least possible machining vibration, while maintaining accurate precision and surface finish. The vibrations from the machine tool not only affect the quality of the machined part but also the machine tool itself, since the cutting tool is susceptible to break or wear quickly when operating at high vibration modes, thus inevitably decreasing tool life. Vibration control has gained considerable attention in many areas including aerospace, automotive, structural, and manufacturing. Positive Position Feedback (PPF) is a vibration control scheme that is commonly used for its robust stability properties. A PPF controller works as a low pass filter, eliminating instability from unmodeled higher-frequency modes. The PPF controller concept is used in developing an active vibration control scheme to target the critical frequencies of the Tetraform. The controller is implemented with use of piezoelectric actuators and sensors, where the sensors are bonded to the opposing sides of the beams as the actuators, allowing for the assumption of collocation. The sensor/actuator pairs are placed at an optimal location on the Tetraform with high modal displacements for all the critical frequencies. Multiple finite element models are developed in order to analyze the structural dynamics and allow for controller design. A model is developed in the finite element software ANSYS and is used to obtain the Tetraform's dynamic characteristics, which include natural frequencies and mode shapes. This model is also used to visualize the changes in mode shapes due to structural modifications or different material selections. Other models are also developed in Matlab and Simulink. This consists of the creation of a finite element model which is then converted to state space. The piezoelectric transducers are included in this model for the input and output of the state space model. This model can be used for controller design where the goal is to create maximum decibel reduction at critical frequencies while attempting to minimize controller effort.
Show less - Date Issued
- 2009
- Identifier
- CFE0002962, ucf:47976
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0002962
- Title
- The Relationship Between DNA's Physical Properties and the DNA Molecule's Harmonic Signature, and Related Motion in Water--A Computational Investigation.
- Creator
-
Boyer, Victor, Proctor, Michael, Thompson, William, Karwowski, Waldemar, Calloway, Richard, University of Central Florida
- Abstract / Description
-
This research investigates through computational methods whether the physical properties of DNA contribute to its harmonic signature, the uniqueness of that signature if present, and motion of the DNA molecule in water. When DNA is solvated in water at normal 'room temperature', it experiences a natural vibration due to the Brownian motion of the particles in the water colliding with the DNA. The null hypothesis is that there is no evidence to suggest a relationship between DNA's motion and...
Show moreThis research investigates through computational methods whether the physical properties of DNA contribute to its harmonic signature, the uniqueness of that signature if present, and motion of the DNA molecule in water. When DNA is solvated in water at normal 'room temperature', it experiences a natural vibration due to the Brownian motion of the particles in the water colliding with the DNA. The null hypothesis is that there is no evidence to suggest a relationship between DNA's motion and strand length, while the alternative hypothesis is that there is evidence to suggest a relationship between DNA's vibrational motion and strand length. In a similar vein to the first hypothesis, a second hypothesis posits that DNA's vibrational motion may be dependent on strand content. The nature of this relationship, whether linear, exponential, logarithmic or non-continuous is not hypothesized by this research but will be discovered by testing if there is evidence to suggest a relationship between DNA's motion and strand length. The research also aims to discover whether the motion of DNA, when it varies by strand length and/or content, is sufficiently unique to allow that DNA to be identified in the absence of foreknowledge of the type of DNA that is present in a manner similar to a signature. If there is evidence to suggest that there is a uniqueness in DNA's vibrational motion under varying DNA strand content or length, then additional experimentation will be needed to determine whether these variances are unique across small changes as well as large changes, or large changes only. Finally, the question of whether it might be possible to identify a strand of unique DNA by base pair configuration solely from its vibrational signature, or if not, whether it might be possible to identify changes existing inside of a known DNA strand (such as a corruption, transposition or mutational error) is explored. Given the computational approach to this research, the NAMD simulation package (released by the Theoretical and Computational Biophysics Group at the University of Illinois at Urbana-Champaign) with the CHARMM force field would be the most appropriate set of tools for this investigation (Phillips et al., 2005), and will therefore be the toolset used in this research. For visualization and manipulation of model data, the VMD (Visual Molecular Dynamics) package will be employed. Further, these tools may be optimized and/or be aware of nucleic acid structures, and are free. These tools appear to be sufficient for this task, with validated fidelity of the simulation to provide vibrational and pressure profile data that could be analyzed; sufficient capabilities to do what is being asked of it; speed, so that runs can be done in a reasonable period of time (weeks versus months); and parallelizability, so that the tool could be run over a clustered network of computers dedicated to the task to increase the speed and capacity of the simulations. The computer cluster enabled analysis of 30,000 to 40,000 atom systems spending more than 410,000 CPU computational hours of hundreds of nano second duration, experimental runs each sampled 500,000 times with two-femtosecond (")frames.(")Using Fourier transforms of run pressure readings into frequencies, the simulation investigation could not reject the null hypotheses that the frequencies observed in the system runs are independent on the DNA strand length or content being studied. To be clear, frequency variations were present in the in silicon replications of the DNA in ionized solutions, but we were unable to conclude that those variations were not due to other system factors. There were several tests employed to determine alternative factors that caused these variations. Chief among the factors is the possibility that the water box itself is the source of a large amount of vibrational noise that makes it difficult or impossible with the tools that we had at our disposal to isolate any signals emitted by the DNA strands. Assuming the water-box itself was a source of large amounts of vibrational noise, an emergent hypothesis was generated and additional post-hoc testing was undertaken to attempt to isolate and then filter the water box noise from the rest of the system frequencies. With conclusive results we found that the water box is responsible for the majority of the signals being recorded, resulting in very low signal amplitudes from the DNA molecules themselves. Using these low signal amplitudes being emitted by the DNA, we could not be conclusively uniquely associate either DNA length or content with the remaining observed frequencies. A brief look at a future possible isolation technique, wavelet analysis, was conducted. Finally, because these results are dependent on the tools at our disposal and hence by no means conclusive, suggestions for future research to expand on and further test these hypothesis are made in the final chapter.
Show less - Date Issued
- 2015
- Identifier
- CFE0005930, ucf:50835
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0005930
- Title
- Vibration Reduction of Mistuned Bladed Disks via Piezoelectric-Based Resonance Frequency Detuning.
- Creator
-
Lopp, Garrett, Kauffman, Jeffrey L., Das, Tuhin, Xu, Yunjun, University of Central Florida
- Abstract / Description
-
Recent trends in turbomachinery blade technology have led to increased use of monolithically constructed bladed disks (blisks). Although offering a wealth of performance benefits, this construction removes the blade-attachment interface present in the conventional design, thus unintentionally removing a source of friction-based damping needed to counteract large vibrations during resonance passages. This issue is further exacerbated in the presence of blade mistuning that arises from small...
Show moreRecent trends in turbomachinery blade technology have led to increased use of monolithically constructed bladed disks (blisks). Although offering a wealth of performance benefits, this construction removes the blade-attachment interface present in the conventional design, thus unintentionally removing a source of friction-based damping needed to counteract large vibrations during resonance passages. This issue is further exacerbated in the presence of blade mistuning that arises from small imperfections from otherwise identical blades and are unavoidable as they originate from manufacturing tolerances and operational wear over the lifespan of the engine. Mistuning is known to induce vibration localization with large vibration amplitudes that render blades susceptible to failure induced by high-cycle fatigue. The resonance frequency detuning (RFD) method reduces vibration associated with resonance crossings by selectively altering the blades' structural response. This method utilizes the variable stiffness properties of piezoelectric materials to switch between available stiffness states at some optimal time as the excitation frequency sweeps through a resonance. For a single-degree-of-freedom (SDOF) system, RFD performance is well defined. This research provides the framework to extend RFD to more realistic applications when the SDOF assumption breaks down, such as in cases of blade mistuning. Mistuning is inherently random; thus, a Monte Carlo analysis performed on a computationally cheap lumped-parameter model provides insight into RFD performance for various test parameters. Application of a genetic algorithm reduces the computational expense required to identify the optimal set of stiffness-state switches. This research also develops a low-order blisk model with blade-mounted piezoelectric patches as a tractable first step to apply RFD to more realistic systems. Application of a multi-objective optimization algorithm produces Pareto fronts that aid in the selection of the optimized patch parameters. Experimental tests utilizing the academic blisk with the optimized patches provides validation.
Show less - Date Issued
- 2018
- Identifier
- CFE0007488, ucf:52639
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0007488
- Title
- Academic Blade Geometries for Baseline Comparisons of Forced Vibration Response Predictions.
- Creator
-
Little, James, Kauffman, Jeffrey, Gordon, Ali, Bai, Yuanli, University of Central Florida
- Abstract / Description
-
Predicting the damping associated with underplatform dampers remains a challenge in turbomachineryblade and friction damper design. Turbomachinery blade forced response analysismethods usually rely on nonlinear codes and reduced order models to predict vibration characteristicsof blades. Two academic blade geometries coupled with underplatform dampers are presentedhere for comparison of these model reduction and forced response simulation techniques. The twoblades are representative of free...
Show morePredicting the damping associated with underplatform dampers remains a challenge in turbomachineryblade and friction damper design. Turbomachinery blade forced response analysismethods usually rely on nonlinear codes and reduced order models to predict vibration characteristicsof blades. Two academic blade geometries coupled with underplatform dampers are presentedhere for comparison of these model reduction and forced response simulation techniques. The twoblades are representative of free-standing turbine blades and exhibit qualitatively similar behavioras highly-complex industrial blades. This thesis fully describes the proposed academic bladegeometries and models; it further analyzes and predicts the blades forced response characteristicsusing the same procedure as industry blades. This analysis classifies the results in terms of resonancefrequency, vibration amplitude, and damping over a range of aerodynamic excitation toexamine the vibration behavior of the blade/damper system. Additionally, the analysis investigatesthe effect variations of the contact parameters (friction coefficient, damper / platform roughnessand damper mass) have on the predicted blade vibration characteristics, with sensitivities to each parameter. Finally, an investigation of the number of modes retained in the reduced order modelshows convergence behavior as well as providing additional data for comparison with alternativemodel reduction and forced response prediction methods. The academic blade models are shownto behave qualitatively similar to high fidelity industry blade models when the number of retained modes in a modal analysis are varied and behave qualitatively similar under sensitives to designparameters.
Show less - Date Issued
- 2017
- Identifier
- CFE0006616, ucf:51281
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0006616
- Title
- Optimal Switch Timing for Piezoelectric-Based Semi-Active Vibration Reduction Techniques.
- Creator
-
Kelley, Christopher, Kauffman, Jeffrey, Das, Tuhin, Xu, Yunjun, University of Central Florida
- Abstract / Description
-
Semi-active vibration reduction techniques switch a piezoelectric transducer between an open circuit and a shunt circuit in a way that reduces vibration. The steady-state vibration amplitude is reduced by exploiting the change in stiffness between states, manipulating the converted electrical energy, or both. Semi-active techniques typically require four switches per vibration cycle. Control laws such as state switching and synchronized switch damping require switches to occur at every...
Show moreSemi-active vibration reduction techniques switch a piezoelectric transducer between an open circuit and a shunt circuit in a way that reduces vibration. The steady-state vibration amplitude is reduced by exploiting the change in stiffness between states, manipulating the converted electrical energy, or both. Semi-active techniques typically require four switches per vibration cycle. Control laws such as state switching and synchronized switch damping require switches to occur at every displacement extrema. Due to the complexity of analyzing a system with discrete switches, these control laws were developed based on intuition. The few analyses that attempt to determine an optimal switching law mathematically only evaluate the system at resonance. This thesis investigates the effects of switch timing on vibration reduction and the frequency dependence of the optimal switch timing control law. Regardless of the switch timing, sensing uncertainties, noise, and modeling errors can cause the switches to occur away from the designed moment. Thus, this work also quantifies the expected degradation in vibration reduction performance due to variations in the designed switch time. Experimental, numerical, and analytical solutions agree that the optimal switch timing of these semi-active techniques depends on frequency. A closed-form solution for the optimal switch timing is derived in terms of well-known, non-dimensional parameters.
Show less - Date Issued
- 2016
- Identifier
- CFE0006336, ucf:51555
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0006336
- Title
- Chaotification as a Means of Broadband Vibration Energy Harvesting with Piezoelectric Materials.
- Creator
-
Geiyer, Daniel, Kauffman, Jeffrey L., Das, Tuhin, Moslehy, Faissal, Shivamoggi, Bhimsen, University of Central Florida
- Abstract / Description
-
Computing advances and component miniaturization in circuits coupled with stagnating battery technology have fueled growth in the development of high efficiency energy harvesters. Vibration-to-electricity energy harvesting techniques have been investigated extensively for use in sensors embedded in structures or in hard-to-reach locations like turbomachinery, surgical implants, and GPS animal trackers. Piezoelectric materials are commonly used in harvesters as they possess the ability to...
Show moreComputing advances and component miniaturization in circuits coupled with stagnating battery technology have fueled growth in the development of high efficiency energy harvesters. Vibration-to-electricity energy harvesting techniques have been investigated extensively for use in sensors embedded in structures or in hard-to-reach locations like turbomachinery, surgical implants, and GPS animal trackers. Piezoelectric materials are commonly used in harvesters as they possess the ability to convert strain energy directly into electrical energy and can work concurrently as actuators for damping applications. The prototypical harvesting system places two piezoelectric patches on both sides of the location of maximum strain on a cantilever beam. While efficient around resonance, performance drops dramatically should the driving frequency drift away from the beam's fundamental frequency. To date, researchers have worked to improve harvesting capability by modifying material properties, using alternative geometries, creating more efficient harvesting circuits, and inducing nonlinearities. These techniques have partially mitigated the resonance excitation dependence for vibration-based harvesting, but much work remains.In this dissertation, an induced nonlinearity destabilizes a central equilibrium point, resulting in a bistable potential function governing the cantilever beam system. Depending on the environment, multiple stable solutions are possible and can coexist. Typically, researchers neglect chaos and assume that with enough energy in the ambient environment, large displacement trajectories can exist uniquely. When subjected to disturbances a system can fall to coexistent lower energy solutions including aperiodic, chaotic oscillations. Treating chaotic motion as a desirable behavior of the system allows frequency content away from resonance to produce motion about a theoretically infinite number of unstable periodic orbits that can be stabilized through control. The extreme sensitivity to initial conditions exhibited by chaotic systems paired with a pole placement control strategy pioneered by Ott, Grebogi, and Yorke permits small perturbations to an accessible system parameter to alter the system response dramatically. Periodic perturbation of the system trajectories in the vicinity of isolated unstable orbit points can therefore stabilize low-energy chaotic oscillations onto larger trajectory orbits more suitable for energy harvesting.The periodic perturbation-based control method rids the need of a system model. It only requires discrete displacement, velocity, or voltage time series data of the chaotic system driven by harmonic excitation. While the analysis techniques are not fundamentally limited to harmonic excitation, this condition permits the use of standard discrete mapping techniques to isolate periodic orbits of interest. Local linear model fits characterize the orbit and admit the necessary control perturbation calculations from the time series data.This work discusses the feasibility of such a method for vibration energy harvesting, displays stable solutions under various control algorithms, and implements a hybrid bench-top experiment using MATLAB and LabVIEW FPGA. In conclusion, this work discusses the limitations for wide-scale use and addresses areas of further work; both with respect to chaotic energy harvesting and parallel advances required within the field as a whole.
Show less - Date Issued
- 2017
- Identifier
- CFE0006878, ucf:51718
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0006878
- Title
- Reduced Susceptibility of Deformation due to Vibrational and Gravitational Effects on a Focus Variable Adaptive Lens.
- Creator
-
Relina, Victoriya, Wu, Shintson, Likamwa, Patrick, Delfyett, Peter, University of Central Florida
- Abstract / Description
-
Orthodox optical devices, such as lenses, mirrors, and prisms, are composed of solid-state materials, which although well studied and implemented ubiquitously are severely limited in their adaptable properties. An arguably new field of adaptive optics has emerged to further expand photonic manipulation competences of optical components. Fluid-based adaptive optical components were introduced as early as 1968; such components have the ability to change the shape of their interface surface,...
Show moreOrthodox optical devices, such as lenses, mirrors, and prisms, are composed of solid-state materials, which although well studied and implemented ubiquitously are severely limited in their adaptable properties. An arguably new field of adaptive optics has emerged to further expand photonic manipulation competences of optical components. Fluid-based adaptive optical components were introduced as early as 1968; such components have the ability to change the shape of their interface surface, thus allowing for a variable curvature profile. The method of manipulation varies greatly, as does the range of surface deformations. A solid-state optical component is affected by system vibration variation only (difference in vibration from one component to the other due to damping effect). By comparison, two large limiting factors of a fluid-based adaptive optical component are the effect of local vibrations on the surface of the device and gravitational effect (when the optical axis of a lens is positioned parallel to gravitational pull). Such a gravitational effect has been mitigated by the invention of the mechanical electrowetting lens, which uses density matching of two liquids that make up an adaptive lens. However, this configuration creates an extra limiting factor of density matching two optically clear fluids with a desirable transmission spectrum. This method can also become bulky when a large aperture is needed. In this thesis, two adaptive lens systems are explored. Principles of operation, performance, limitations, as well as future improvements are studied and theorized. The first lens uses an optically clear elastomer as the substrate of an adaptive lens and a primitive mechanical manipulation to turn a plano(-)plano lens into a plano(-)convex lens. The second lens is composed of an optically clear gel rather than a fluid. Both methods exhibit excellent optical properties regardless of the orientation about the gravitational pull and significantly limit local vibration affects simply by the physical nature of the chosen materials.
Show less - Date Issued
- 2013
- Identifier
- CFE0004739, ucf:49841
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0004739
- Title
- Load Estimation, Structural Identification and Human Comfort Assessment of Flexible Structures.
- Creator
-
Celik, Ozan, Catbas, Necati, Yun, Hae-Bum, Makris, Nicos, Kauffman, Jeffrey L., University of Central Florida
- Abstract / Description
-
Stadiums, pedestrian bridges, dance floors, and concert halls are distinct from other civil engineering structures due to several challenges in their design and dynamic behavior. These challenges originate from the flexible inherent nature of these structures coupled with human interactions in the form of loading. The investigations in past literature on this topic clearly state that the design of flexible structures can be improved with better load modeling strategies acquired with reliable...
Show moreStadiums, pedestrian bridges, dance floors, and concert halls are distinct from other civil engineering structures due to several challenges in their design and dynamic behavior. These challenges originate from the flexible inherent nature of these structures coupled with human interactions in the form of loading. The investigations in past literature on this topic clearly state that the design of flexible structures can be improved with better load modeling strategies acquired with reliable load quantification, a deeper understanding of structural response, generation of simple and efficient human-structure interaction models and new measurement and assessment criteria for acceptable vibration levels. In contribution to these possible improvements, this dissertation taps into three specific areas: the load quantification of lively individuals or crowds, the structural identification under non-stationary and narrowband disturbances and the measurement of excessive vibration levels for human comfort. For load quantification, a computer vision based approach capable of tracking both individual and crowd motion is used. For structural identification, a noise-assisted Multivariate Empirical Mode Decomposition (MEMD) algorithm is incorporated into the operational modal analysis. The measurement of excessive vibration levels and the assessment of human comfort are accomplished through computer vision based human and object tracking, which provides a more convenient means for measurement and computation. All the proposed methods are tested in the laboratory environment utilizing a grandstand simulator and in the field on a pedestrian bridge and on a football stadium. Findings and interpretations from the experimental results are presented. The dissertation is concluded by highlighting the critical findings and the possible future work that may be conducted.
Show less - Date Issued
- 2017
- Identifier
- CFE0006863, ucf:51752
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0006863