View All Items
- Title
- STUDY OF ESD EFFECTS ON RF POWER AMPLIFIERS.
- Creator
-
Narasimha Raju, Divya, Yuan, Jiann, University of Central Florida
- Abstract / Description
-
Today, ESD is a major consideration in the design and manufacture of ICs. ESD problems are increasing in the electronics industry because of the increasing trend toward higher speed and smaller device sizes. There is growing interest in knowing the effects of ESD protection circuit on the performance of semiconductor integrated circuits (ICs) because of the impact it has on core RF circuit performance. This study investigated the impact of ESD protection circuit on RF Power amplifiers. Even...
Show moreToday, ESD is a major consideration in the design and manufacture of ICs. ESD problems are increasing in the electronics industry because of the increasing trend toward higher speed and smaller device sizes. There is growing interest in knowing the effects of ESD protection circuit on the performance of semiconductor integrated circuits (ICs) because of the impact it has on core RF circuit performance. This study investigated the impact of ESD protection circuit on RF Power amplifiers. Even though ESD protection for digital circuits has been known for a while, RF-ESD is a challenge. From a thorough literature search on prior art ESD protection circuits, Silicon controlled rectifier was found to be most effective and reliable ESD protection for power amplifier circuit. A SCR based ESD protection was used to protect the power amplifier and a model was developed to gain better understanding of ESD protected power amplifiers. Simulated results were compared and contrasted against theoretically derived equations. A 5.2GHz fully ESD protected Class AB power amplifier was designed and simulated using TSMC 0.18 um technology. Further, the ESD protection circuit was added to a cascoded Class-E power amplifier operating at 5.2 GHz. ADS simulation results were used to analyze the PA's RF performance degradation. Various optimization techniques were used to improve the RF circuit performance.
Show less - Date Issued
- 2011
- Identifier
- CFE0003630, ucf:48881
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0003630
- Title
- DESIGN OF SILICON CONTROLLED RECTIFERS FOR ROBUST ELECTROSTATIC DISCHARGE PROTECTION APPLICATIONS.
- Creator
-
Liu, Zhiwei, Liou, Juin J., University of Central Florida
- Abstract / Description
-
Electrostatic Discharge (ESD) phenomenon happens everywhere in our daily life. And it can occurs through the whole lifespan of an Integrated Circuit (IC), from the early wafer fabrication process, extending to assembly operation, and finally ending at the user's site. It has been reported that up to 35% of total IC field failures are ESD-induced, with estimated annual costs to the IC industry running to several billion dollars. The most straightforward way to avoid the ICs suffering from the...
Show moreElectrostatic Discharge (ESD) phenomenon happens everywhere in our daily life. And it can occurs through the whole lifespan of an Integrated Circuit (IC), from the early wafer fabrication process, extending to assembly operation, and finally ending at the user's site. It has been reported that up to 35% of total IC field failures are ESD-induced, with estimated annual costs to the IC industry running to several billion dollars. The most straightforward way to avoid the ICs suffering from the threatening of ESD damages is to develop on-chip ESD protection circuits which can afford a robust, low-impedance bypassing path to divert the ESD current to the ground. There are three different types of popular ESD protection devices widely used in the industry, and they are diodes or diodes string, Grounded-gate NMOS (GGNMOS) and Silicon Controlled Rectifier (SCR). Among these different protection solutions, SCR devices have the highest ESD current conduction capability due to the conductivity modulation effect. But SCR devices also have several shortcomings such as the higher triggering point, the lower clamping voltage etc, which will become obstacles for SCR to be widely used as an ESD protection solutions in most of the industry IC products. At first, in some applications with pin voltage goes below ground or above the VDD, dual directional protection between each two pins are desired. The traditional dual-directional SCR structures will consume a larger silicon area or lead to big leakage current issue due to the happening of punch-through effect. A new and improved SCR structure for low-triggering ESD applications has been proposed in this dissertation and successfully realized in a BiCMOS process. Such a structure possesses the desirable characteristics of a dual-polarity conduction, low trigger voltage, small leakage current, large failing current, adjustable holding voltage, and compact size. Another issue with SCR devices is its deep snapback or lower holding voltage, which normally will lead to the latch-up happen. To make SCR devices be immunity with latch-up, it is required to elevate its holding voltage to be larger than the circuits operational voltage, which can be several tens volts in modern power electronic circuits. Two possible solutions have been proposed to resolve this issue. One solution is accomplished by using a segmented emitter topology based on the concept that the holding voltage can be increased by reducing the emitter injection efficiency. Experimental data show that the new SCR can posses a holding voltage that is larger than 40V and a failure current It2 that is higher than 28mA/um. The other solution is accomplished by stacking several low triggering voltage high holding voltage SCR cells together. The TLP measurement results show that this novel SCR stacking structure has an extremely high holding voltage, very small snapback, and acceptable failure current. The High Holding Voltage Figure of Merit (HHVFOM) has been proposed to be a criterion for different high holding voltage solutions. The HHVFOM comparison of our proposed structures and the existing high holding voltage solutions also show the advantages of our work.
Show less - Date Issued
- 2010
- Identifier
- CFE0003166, ucf:48616
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0003166
- Title
- On-Chip Electro-Static Discharge (ESD) Protection for Radio-Frequency Integrated Circuits.
- Creator
-
Cui, Qiang, Liou, Juin, Yuan, Jiann-Shiun, Wu, Xinzhang, Haralambous, Michael, Shen, Zheng, Deppe, Dennis, University of Central Florida
- Abstract / Description
-
Electrostatic Discharge (ESD) phenomenon is a common phenomenon in daily life and it could damage the integrated circuit throughout the whole cycle of product from the manufacturing. Several ESD stress models and test methods have been used to reproduce ESD events and characterize ESD protection device's performance. The basic ESD stress models are: Human Body Model (HBM), Machine Model (MM), and Charged Device Model (CDM). On-chip ESD protection devices are widely used to discharge ESD...
Show moreElectrostatic Discharge (ESD) phenomenon is a common phenomenon in daily life and it could damage the integrated circuit throughout the whole cycle of product from the manufacturing. Several ESD stress models and test methods have been used to reproduce ESD events and characterize ESD protection device's performance. The basic ESD stress models are: Human Body Model (HBM), Machine Model (MM), and Charged Device Model (CDM). On-chip ESD protection devices are widely used to discharge ESD current and limit the overstress voltage under different ESD events. Some effective ESD protection devices were reported for low speed circuit applications such as analog ICs or digital ICs in CMOS process. On the contrast, only a few ESD protection devices available for radio frequency integrated circuits (RF ICs). ESD protection for RF ICs is more challenging than traditional low speed CMOS ESD protection design because of the facts that: (1) Process limitation: High-performance RF ICs are typically fabricated in compound semiconductor process such as GaAs pHEMT and SiGe HBT process. And some proved effective ESD devices (e.g. SCR) are not able to be fabricated in those processes due to process limitation. Moreover, compound semiconductor process has lower thermal conductivity which will worsen its ESD damage immunity. (2) Parasitic capacitance limitation: Even for RF CMOS process, the inherent parasitic capacitance of ESD protection devices is a big concern. Therefore, this dissertation will contribute on ESD protection designs for RF ICs in all the major processes including GaAs pHEMT, SiGe BiCMOS and standard CMOS.The ESD protection for RF ICs in GaAs pHEMT process is very difficult, and the typical HBM protection level is below 1-kV HBM level. The first part of our work is to analyze pHEMT's snapback, post-snapback saturation and thermal failure under ESD stress using TLP-like Sentaurus TCAD simulation. The snapback is caused by virtual bipolar transistor due to large electron-hole pairs impacted near drain region. Post-snapback saturation is caused by temperature-induced mobility degradation due to III-V compound semiconductor materials' poor thermal conductivity. And thermal failure is found to be caused by hot spot located in pHEMT's InGaAs layer. Understanding of these physical mechanisms is critical to design effective ESD protection device in GaAs pHEMT process. Several novel ESD protection devices were designed in 0.5um GaAs pHEMT process. The multi-gate pHEMT based ESD protection devices in both enhancement-mode and depletion-mode were reported and characterized then. Due to the multiple current paths available in the multi-gate pHEMT, the new ESD protection clamp showed significantly improved ESD performances over the conventional single-gate pHEMT ESD clamp, including higher current discharge capability, lower on-state resistance, and smaller voltage transient. We proposed another further enhanced ESD protection clamp based on a novel drain-less, multi-gate pHEMT in a 0.5um GaAs pHEMT technology. Based on Barth 4002 TLP measurement results, the ESD protection devices proposed in this chapter can improve the ESD level from 1-kV (0.6 A It2) to up to 8-kV ((>) 5.2 A It2) under HBM. Then we optimized SiGe-based silicon controlled rectifiers (SiGe SCR) in SiGe BiCMOS process. SiGe SCR is considered a good candidate ESD protection device in this process. But the possible slow turn-on issue under CDM ESD events is the major concern. In order to optimize the turn-on performance of SiGe SCR against CDM ESD, the Barth 4012 very fast TLP (vfTLP) and vfTLP-like TCAD simulation were used for characterization and analysis. It was demonstrated that a SiGe SCR implemented with a P PLUG layer and minimal PNP base width can supply the smallest peak voltage and fastest response time which is resulted from the fact that the impact ionization region and effective base width in the SiGe SCR were reduced due to the presence of the P PLUG layer. This work demonstrated a practical approach for designing optimum ESD protection solutions for the low-voltage/radio frequency integrated circuits in SiGe BiCMOS process.In the end, we optimized SCRs in standard silicon-based CMOS process to supply protection for high speed/radio-frequency ICs. SCR is again considered the best for its excellent current handling ability. But the parasitic capacitance of SCRs needs to be reduced to limit SCR's impact to RF performance. We proposed a novel SCR-based ESD structure and characterize it experimentally for the design of effective ESD protection in high-frequency CMOS based integrated circuits. The proposed SCR-based ESD protection device showed a much lower parasitic capacitance and better ESD performance than the conventional SCR and a low-capacitance SCR reported in the literature. The physics underlying the low capacitance was explained by measurements using HP 4284 capacitance meter.Throughout the dissertation work, all the measurements are mainly conducted using Barth 4002 transimission line pulsing (TLP) and Barth 4012 very fast transmission line pulsing (vfTLP) testers. All the simulation was performed using Sentaurus TCAD tool from Synopsys.
Show less - Date Issued
- 2013
- Identifier
- CFE0004668, ucf:49848
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0004668
- Title
- Design, Simulation and Characterization of Novel Electrostatic Discharge Protection Devices and Circuits in Advanced Silicon Technologies.
- Creator
-
Liang, Wei, Sundaram, Kalpathy, Fan, Deliang, Jin, Yier, Wei, Lei, Salcedo, Javier, University of Central Florida
- Abstract / Description
-
Electrostatic Discharge (ESD) has been one of the major reliability concerns in the advanced silicon technologies and it becomes more important with technology scaling. It has been reported that more than 35% of the failures in integrated circuits (ICs) are ESD induced. ESD event is a phenomenon that a finite amount of charges transfer between two objects with different potential in a quite short time. Such event contains a large energy and the ICs without proper ESD protection could be...
Show moreElectrostatic Discharge (ESD) has been one of the major reliability concerns in the advanced silicon technologies and it becomes more important with technology scaling. It has been reported that more than 35% of the failures in integrated circuits (ICs) are ESD induced. ESD event is a phenomenon that a finite amount of charges transfer between two objects with different potential in a quite short time. Such event contains a large energy and the ICs without proper ESD protection could be destroyed easily, so ESD protection solutions are essential to semiconductor industry.ESD protection design consists of on-chip and off-chip ESD protection design, and the research works in this dissertation are all conducted in on-chip level, which incorporate the ESD protection devices and circuits into the microchip, to provide with basic ESD protection from manufacturing to customer use. The basic idea of ESD protection design is to provide a path with low impedance which directs most of the ESD current to flow through itself instead of the core circuit, and the ESD protection path must be robust enough to make sure that it does not fail before the core circuit. In this way, proper design on protection devices and circuits should be considered carefully. To assist the understanding and design of ESD protection, the ESD event in real world has been classified into a few ESD model including Human Body Model (HBM), Machine Model (MM), Charged Device Model (CDM), etc. Some mainstream testing method and industry standard are also introduced, including Transmission Line Pulse (TLP), and IEC 61000-4-2. ESD protection devices including diode, Gate-Grounded N-type MOSFET (GGNMOS), Silicon Controlled Rectifier (SCR) are basic elements for ESD protection design. In this dissertation, the device characteristics in ESD event and their applications are introduced. From the perspective of the whole chip ESD protection design, the concept of circuit level ESD protection and the ESD clamps are also briefly introduced. Technology Computer Aided Design (TCAD) and Simulation Program with Integrated Circuit Emphasis (SPICE) simulation is widely used in ESD protection design. In this dissertation, TCAD and SPICE simulation are carried out for a few times for both of pre-tapeout evaluation on characteristics of the proposed device and circuit and post-tapeout analysis on structure operating mechanism.Automotive electronics has been a popular subject in semiconductor industry, and due to the special requirement of the automotive applications like the capacitive pins, the ESD protection device used in such applications need to be specially designed. In this dissertation, a few SCRs without snapback are discussed in detail. To avoid core circuit damages caused the displacement current induced by the large snapback in conventional SCR, an eliminated/minimized snapback is preferred in a selection of the protection device. Two novel SCRs are proposed for High Voltage (HV), Medium Voltage (MV), and Low Voltage (LV) automotive ESD protection.The typical operating temperature for ICs is up to 125 (&)#186;C, however in automotive applications, the operating temperature may extend up to 850 (&)#186;C. In this way, the characteristics of the ESD protection device under the elevated temperatures will be an essential part to investigate for automotive ESD protection design. In this dissertation, the high temperature characteristics of ESD protection devices including diode and a few SCRs is measured and discussed in detail. TCAD simulation are also conducted to explain the underlying physical mechanism. This work provides with a useful insight and information to ESD protection design in high temperature applications.Besides the high temperature environment, ESD protection are also highly needed for electronics working in other extreme environment like the space. Space is an environment that contains kinds of radiation source and at the same time can generate abundant ESD. The ESD adhering to the space systems could be a potential threat to the space electronics. At the same time, the characteristics of the ESD protection part especially the basic protection device used in the space electronics could be influenced after the irradiation in the space. Therefore, the investigation of the radiation effects on ESD protection devices are necessary. In this dissertation, the total ionizing dose (TID) effects on ESD protection devices are investigated. The devices are irradiated with 1.5 MeV He+ and characterized with TLP tester. The pre- and post-irradiation characteristics are compared and the variation on key ESD parameters are analyzed and discussed. This work offers a useful insight on ESD devices' operation under TID and help with the device designing on ESD protection devices for space electronics.Single ESD protection devices are essential part constructing the ESD protection network, however the optimization on ESD clamp circuit design is also important on building an efficient whole chip ESD protection network. In this dissertation, the design and simulation of a novel voltage triggered ESD detection circuit are introduced. The voltage triggered ESD detection circuit is proposed in a 0.18 um CMOS technology. Comparing with the conventional RC based detection circuit, the proposed circuit realizes a higher triggering efficiency with a much smaller footprint, and is immune to false triggering under fast power-up events. The proposed circuit has a better sensitivity to ESD event and is more reliable in ESD protection applications.The leakage current has been a concern with the scaling down of the thickness of the gate oxide. Therefore, a proper design of the ESD clamp for power rail ESD protection need to be specially considered. In this dissertation, a design of a novel ESD clamp with low leakage current is analyzed. The proposed clamp realized a pretty low leakage current up to 12 nA, and has a smaller footprint than conventional design. It also has a long hold-on time under ESD event and a quick turn-off mechanism for false triggering. SPICE simulation is carried out to evaluate the operation of the proposed ESD clamp.
Show less - Date Issued
- 2017
- Identifier
- CFE0007126, ucf:52298
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0007126
- Title
- Design of Low-Capacitance Electrostatic Discharge (ESD) Protection Devices in Advanced Silicon Technologies.
- Creator
-
Dong, Aihua, Sundaram, Kalpathy, Fan, Deliang, Gong, Xun, Wei, Lei, Salcedo, Javier, University of Central Florida
- Abstract / Description
-
Electrostatic discharge (ESD) related failure is a major IC reliability concern and this is particularly true as technology continues shrink to nano-metric dimensions. ESD design window research shows that ESD robustness of victim devices keep decreasing from 350nm bulk technology to 7nm FinFET technologies. In the meantime, parasitic capacitance of ESD diode with same It2 in FinFET technologies is approximately 3X compared with that in planar technologies. Thus transition from planar to...
Show moreElectrostatic discharge (ESD) related failure is a major IC reliability concern and this is particularly true as technology continues shrink to nano-metric dimensions. ESD design window research shows that ESD robustness of victim devices keep decreasing from 350nm bulk technology to 7nm FinFET technologies. In the meantime, parasitic capacitance of ESD diode with same It2 in FinFET technologies is approximately 3X compared with that in planar technologies. Thus transition from planar to FinFET technology requires more robust ESD protection however the large parasitic capacitance of ESD protection cell is problematic in high-speed interface design. To reduce the parasitic capacitance, a dual diode silicon controlled rectifier (DD-SCR) is presented in this dissertation. This design can exhibit good trade-offs between ESD robustness and parasitic capacitance characteristics. Besides, different bounding materials lead to performance variations in DD-SCRs are compared. Radio frequency (RF) technology is also demanded low capacitance ESD protection. To address this concern, a ?-network is presented, providing robust ESD protection for 10-60 GHz RF circuit. Like a low pass ? filter, the network can reflect high frequency RF signals and transmit low frequency ESD pulses. Given proper inductor value, networks can work as robust ESD solutions at a certain Giga Hertz frequency range, making this design suitable for broad band protection in RF input/outputs (I/Os). To increase the holding voltage and reduce snapback, a resistor assist triggering heterogeneous stacking structure is presented in this dissertation, which can increase the holding voltage and also keep the trigger voltage nearly as same as a single SCR device.
Show less - Date Issued
- 2018
- Identifier
- CFE0007172, ucf:52251
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0007172
- Title
- Semiconductor Device Modeling, Simulation, and Failure Prediction for Electrostatic Discharge Conditions.
- Creator
-
Li, Hang, Sundaram, Kalpathy, Batarseh, Issa, Fan, Deliang, Gong, Xun, Salcedo, Javier, University of Central Florida
- Abstract / Description
-
Electrostatic Discharge (ESD) caused failures are major reliability issues in IC industry. Device modeling for ESD conditions is necessary to evaluate ESD robustness in simulation. Although SPICE model is accurate and efficient for circuit simulations in most cases, devices under ESD conditions operate in abnormal status. SPICE model cannot cover the device operating region beyond normal operation.Thermal failure is one of the main reasons to cause device failure under ESD conditions. A...
Show moreElectrostatic Discharge (ESD) caused failures are major reliability issues in IC industry. Device modeling for ESD conditions is necessary to evaluate ESD robustness in simulation. Although SPICE model is accurate and efficient for circuit simulations in most cases, devices under ESD conditions operate in abnormal status. SPICE model cannot cover the device operating region beyond normal operation.Thermal failure is one of the main reasons to cause device failure under ESD conditions. A compact model is developed to predict thermal failure with circuit simulators. Instead of considering the detailed failure mechanisms, a failure temperature is introduced to indicate device failure. The developed model is implemented by a multiple-stage thermal network.P-N junction is the fundamental structure for ESD protection devices. An enhanced diode model is proposed and is used to simulate the device behaviors for ESD events. The model includes all physical effects for ESD conditions, which are voltage overshoot, self-heating effect, velocity saturation and thermal failure. The proposed model not only can fit the I-V and transient characteristics, but also can predict failure for different pulses.Safe Operating Area (SOA) is an important factor to evaluate the LDMOS performance. The transient SOA boundary is considered as power-defined. By placing the failure monitor under certain conditions, the developed modeling methodology can predict the boundary of transient SOA for any short pulse stress conditions. No matter failure happens before or after snapback phenomenon.Weibull distribution is popular to evaluate the dielectric lifetime for CVS. By using the transformative version of power law, the pulsing stresses are converted into CVS, and TDDB under ESD conditions for SiN MIMCAPs is analyzed. The thickness dependency and area independency of capacitor breakdown voltage is observed, which can be explained by the constant ?E model instead of conventional percolation model.
Show less - Date Issued
- 2019
- Identifier
- CFE0007670, ucf:52512
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0007670
- Title
- Transient Safe Operating Area (TSOA) for ESD applications.
- Creator
-
Malobabic, Slavica, Liou, Juin, Shen, Zheng, Yuan, Jiann-Shiun, Vinson, James, University of Central Florida
- Abstract / Description
-
A methodology to obtain design guidelines for gate oxide input pin protection and high voltage output pin protection in Electrostatic Discharge (ESD) time frame is developed through measurements and Technology Computer Aided Design (TCAD).A set of parameters based on transient measurements are used to define Transient Safe Operating Area (TSOA). The parameters are then used to assess effectiveness of protection devices for output and input pins.The methodology for input pins includes...
Show moreA methodology to obtain design guidelines for gate oxide input pin protection and high voltage output pin protection in Electrostatic Discharge (ESD) time frame is developed through measurements and Technology Computer Aided Design (TCAD).A set of parameters based on transient measurements are used to define Transient Safe Operating Area (TSOA). The parameters are then used to assess effectiveness of protection devices for output and input pins.The methodology for input pins includes establishing ESD design targets under Charged Device Model (CDM) type stress in low voltage MOS inputs.The methodology for output pins includes defining ESD design targets under Human Metal Model (HMM) type stress in high voltage Laterally Diffused MOS (LDMOS) outputs. First, the assessment of standalone LDMOS robustness is performed, followed by establishment of protection design guidelines. Secondly, standalone clamp HMM robustness is evaluated and a prediction methodology for HMM type stress is developed based on standardized testing. Finally, LDMOS and protection clamp parallel protection conditions are identified.
Show less - Date Issued
- 2012
- Identifier
- CFE0004405, ucf:49363
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0004405
- Title
- DESIGN OF LOW-CAPACITANCE AND HIGH-SPEED ELECTROSTATIC DISCHARGE (ESD) DEVICES FOR LOW-VOLTAGE PROTECTION APPLICATIONS.
- Creator
-
Li, You, Liou, Juin J., University of Central Florida
- Abstract / Description
-
Electrostatic discharge (ESD) is defined as the transfer of charge between bodies at different potentials. The electrostatic discharge induced integrated circuit damages occur throughout the whole life of a product from the manufacturing, testing, shipping, handing, to end user operating stages. This is particularly true as microelectronics technology continues shrink to nano-metric dimensions. The ESD related failures is a major IC reliability concern and results in a loss of millions...
Show moreElectrostatic discharge (ESD) is defined as the transfer of charge between bodies at different potentials. The electrostatic discharge induced integrated circuit damages occur throughout the whole life of a product from the manufacturing, testing, shipping, handing, to end user operating stages. This is particularly true as microelectronics technology continues shrink to nano-metric dimensions. The ESD related failures is a major IC reliability concern and results in a loss of millions dollars to the semiconductor industry each year. Several ESD stress models and test methods have been developed to reproduce the real world ESD discharge events and quantify the sensitivity of ESD protection structures. The basic ESD models are: Human body model (HBM), Machine model (MM), and Charged device model (CDM). To avoid or reduce the IC failure due to ESD, the on-chip ESD protection structures and schemes have been implemented to discharge ESD current and clamp overstress voltage under different ESD stress events. Because of its simple structure and good performance, the junction diode is widely used in on-chip ESD protection applications. This is particularly true for ESD protection of low-voltage ICs where a relatively low trigger voltage for the ESD protection device is required. However, when the diode operates under the ESD stress, its current density and temperature are far beyond the normal conditions and the device is in danger of being damaged. For the design of effective ESD protection solution, the ESD robustness and low parasitic capacitance are two major concerns. The ESD robustness is usually defined after the failure current It2 and on-state resistance Ron. The transmission line pulsing (TLP) measurement is a very effective tool for evaluating the ESD robustness of a circuit or single element. This is particularly helpful in characterizing the effect of HBM stress where the ESD-induced damages are more likely due to thermal failures. Two types of diodes with different anode/cathode isolation technologies will be investigated for their ESD performance: one with a LOCOS (Local Oxidation of Silicon) oxide isolation called the LOCOS-bound diode, the other with a polysilicon gate isolation called the polysilicon-bound diode. We first examine the ESD performance of the LOCOS-bound diode. The effects of different diode geometries, metal connection patterns, dimensions and junction configurations on the ESD robustness and parasitic capacitance are investigated experimentally. The devices considered are N+/P-well junction LOCOS-bound diodes having different device widths, lengths and finger numbers, but the approach applies generally to the P+/N-well junction diode as well. The results provide useful insights into optimizing the diode for robust HBM ESD protection applications. Then, the current carrying and voltage clamping capabilities of LOCOS- and polysilicon-bound diodes are compared and investigated based on both TCAD simulation and experimental results. Comparison of these capabilities leads to the conclusion that the polysilicon-bound diode is more suited for ESD protection applications due to its higher performance. The effects of polysilicon-bound diodeÃÂ's design parameters, including the device width, anode/cathode length, finger number, poly-gate length, terminal connection and metal topology, on the ESD robustness are studied. Two figures of merits, FOM_It2 and FOM_Ron, are developed to better assess the effects of different parameters on polysilicon-bound diodeÃÂ's overall ESD performance. As latest generation package styles such as mBGAs, SOTs, SC70s, and CSPs are going to the millimeter-range dimensions, they are often effectively too small for people to handle with fingers. The recent industry data indicates the charged device model (CDM) ESD event becomes increasingly important in todayÃÂ's manufacturing environment and packaging technology. This event generates highly destructive pulses with a very short rise time and very small duration. TLP has been modified to probe CDM ESD protection effectiveness. The pulse width was reduced to the range of 1-10 ns to mimic the very fast transient of the CDM pulses. Such a very fast TLP (VFTLP) testing has been used frequently for CDM ESD characterization. The overshoot voltage and turn-on time are two key considerations for designing the CDM ESD protection devices. A relatively high overshoot voltage can cause failure of the protection devices as well as the protected devices, and a relatively long turn-on time may not switch on the protection device fast enough to effectively protect the core circuit against the CDM stress. The overshoot voltage and turn-on time of an ESD protection device can be observed and extracted from the voltage versus time waveforms measured from the VFTLP testing. Transient behaviors of polysilicon-bound diodes subject to pulses generated by the VFTLP tester are characterized for fast ESD events such as the charged device model. The effects of changing devicesÃÂ' dimension parameters on the transient behaviors and on the overshoot voltage and turn-on time are studied. The correlation between the diode failure and poly-gate configuration under the VFTLP stress is also investigated. Silicon-controlled rectifier (SCR) is another widely used ESD device for protecting the I/O pins and power supply rails of integrated circuits. Multiple fingers are often needed to achieve optimal ESD protection performance, but the uniformity of finger triggering and current flow is always a concern for multi-finger SCR devices operating under the post-snapback region. Without a proper understanding of the finger turn-on mechanism, design and realization of robust SCRs for ESD protection applications are not possible. Two two-finger SCRs with different combinations of anode/cathode regions are considered, and their finger turn-on uniformities are analyzed based on the I-V characteristics obtained from the transmission line pulsing (TLP) tester. The dV/dt effect of pulses with different rise times on the finger turn-on behavior of the SCRs are also investigated experimentally. In this work, unless noted otherwise, all the measurements are conducted using the Barth 4002 transmission line pulsing (TLP) and Barth 4012 very-fast transmission line pulsing (VFTLP) testers.
Show less - Date Issued
- 2010
- Identifier
- CFE0003440, ucf:48401
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0003440
- Title
- Design and Simulation of Device Failure Models for Electrostatic Discharge (ESD) Event.
- Creator
-
Miao, Meng, Sundaram, Kalpathy, Yuan, Jiann-Shiun, Gong, Xun, Jin, Yier, Salcedo, Javier, University of Central Florida
- Abstract / Description
-
In this dissertation, the research mainly focused on discussing ESD failure event simulation and ESD modeling, seeking solutions for ESD issues by simulating ESD event and predict possible ESD reliability problem in IC design. The research involves failure phenomenon caused by ESD/ EOS stress, mainly on the thermal failure due to inevitable self-heating during an ESD stress. Standard Complementary Metal-Oxide-Semiconductor (CMOS) process and high voltage Doublediffusion Metal-Oxide...
Show moreIn this dissertation, the research mainly focused on discussing ESD failure event simulation and ESD modeling, seeking solutions for ESD issues by simulating ESD event and predict possible ESD reliability problem in IC design. The research involves failure phenomenon caused by ESD/ EOS stress, mainly on the thermal failure due to inevitable self-heating during an ESD stress. Standard Complementary Metal-Oxide-Semiconductor (CMOS) process and high voltage Doublediffusion Metal-Oxide-Semiconductor (DMOS) process are used for design of experiment. A multi-function test platform High Power Pulse Instrument (HPPI) is used for ESD event evaluation and device characterization. SPICE-like software ADICE is for back-end simulation.Electrostatic Discharges (ESD) is one of the hazard that may affect IC circuit function and cause serious damage to the chip. The importance of ESD protection has been raised since the CMOS technology advanced and the dimension of transistors scales down. On the other hand, the variety of applications of chips is also making corresponding ESD protection difficult to meet different design requirement. Aside from typical requirements such as core circuit operation voltage, maximum accepted leakage current, breakdown conditions for the process and overall device sizes, special applications like radio frequency and power electronic requires ESD to be low parasitic capacitance and can sustain high level energy. In that case, a proper ESD protection design demands not only a robust ESD protection scheme, but co-design with the inner circuit. For that purpose, it is necessary to simulate the results of ESD impact on IC and find out possible weak point of the circuit and improve it. The first step of the simulation is to have corresponding models available. Unfortunately, ESD models, especially there are lack of circuit-level ESD models that provide quick and accurate prediction of ESD event.In this dissertation paper, ESD models, especially ESD failure models for device thermal failure are introduced, with modeling methodology accordingly. First, an introduction for ESD event and typical ESD protection schemes are introduced. Its purpose is to give basic concept of ESD. For ESD failure models, two typical types can be categorized depends on the physical mechanisms that cause the ESD damage. One is the gate oxide breakdown, which is electric field related. The other is the thermal-related failure, which stems from the self-heating effect associated with the large current passing through the ESD protection structure. The first one has become increasingly challenging with the aggressive scaling of the gate dielectric in advanced processes and ESD protection for that need to be carefully designed. The second one, thermal failure widely exists in semiconductor devices as long as there is ESD current flow through the device and accumulate heat at junctions. Considering the universality of thermal failure in ESD device, it is imperative to establish a model to simulate ESD caused thermal failure.Several works related to ESD model can be done. One crucial part for a failure model is to define the failure criterion. As common solution for ESD simulation and failure prediction. The maximum current level or breakdown voltage is used to judge whether a device fails under ESD stresses. Such failure criteria based on measurable voltage or current values are straightforward and can be easy to implemented in simulation tools. However, the shortcoming of these failure criteria is each failure criterion is specifically designed for certain ESD stress condition. For example, the failure voltage level for Human Body Model and Charged Device Model are quite different, and it is hard to judge a device's ESD capability under standard test conditions based on its transmission line pulse test result. So it is necessary to look deeper into the physical mechanism of device failure under ESD and find a more universal failure criterion for various stress conditions.As one of the major failure mechanisms, thermal failure evaluated by temperature is a more universal failure criterion for device failure under ESD stress. Whatever the stress model is, the device will fail if a critical temperature is reached at certain part inside the device and cause structural damage. Then finding out that critical temperature is crucial to define the failure point for device thermal failure. One chapter of this dissertation will focus on discussing this issue and propose a simple method to give close estimation of the real failure temperature for typical ESD devices.Combined these related works, a comprehensive diode model for ESD simulation is proposed. Using existing ESD models, diode I-V characteristic from low current turn-on to high current saturation can be simulated. By using temperature as the failure criterion, the last point of diode operation, or the second breakdown point, can be accurately predicted. Additional investigation of ESD capability of devices for special case like vertical GaN diode is discussed in Chapter IV. Due to the distinct material property of GaN, the vertical GaN diode exhibits unique and interesting quasi-static I-V curves quite different from conventional silicon semiconductor devices. And that I-V curve varies with different pulse width, indicating strong conductivity modulation of diode neutral region that will delay the complete turn-on of the vertical GaN diode.
Show less - Date Issued
- 2017
- Identifier
- CFE0006626, ucf:51291
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0006626
- Title
- Design of Novel Devices and Circuits for Electrostatic Discharge Protection Applications in Advanced Semiconductor Technologies.
- Creator
-
Wang, Zhixin, Liou, Juin, Gong, Xun, Yuan, Jiann-Shiun, Jin, Yier, Vinson, James, University of Central Florida
- Abstract / Description
-
Electrostatic Discharge (ESD), as a subset of Electrical Overstress (EOS), was reported to be in charge of more than 35% of failure in integrated circuits (ICs). Especially in the manufacturing process, the silicon wafer turns out to be a functional ICs after numerous physical, chemical and mechanical processes, each of which expose the sensitive and fragile ICs to ESD environment. In normal end-user applications, ESD from human and machine handling, surge and spike signals in the power...
Show moreElectrostatic Discharge (ESD), as a subset of Electrical Overstress (EOS), was reported to be in charge of more than 35% of failure in integrated circuits (ICs). Especially in the manufacturing process, the silicon wafer turns out to be a functional ICs after numerous physical, chemical and mechanical processes, each of which expose the sensitive and fragile ICs to ESD environment. In normal end-user applications, ESD from human and machine handling, surge and spike signals in the power supply, and wrong supplying signals, will probably cause severe damage to the ICs and even the whole systems. Generally, ESD protections are evaluated after wafer and even system fabrication, increasing the development period and cost if the protections cannot meet customer's requirements. Therefore, it is important to design and customize robust and area-efficient ESD protections for the ICs at the early development stage. As the technologies generally scaling down, however, ESD protection clamps remain comparable area consumption in the recent years because they provide the discharging path for the ESD energy which rarely scales down. Diode is the most simple and effective device for ESD protection in ICs, but the usage is significantly limited by its low turn-on voltage. MOS devices can be triggered by a dynamic-triggered RC circuit for IOs operating at low voltage, while the one triggered by a static-triggered network, e.g., zener-resistor circuit or grounded-gate configuration, provides a high trigger voltage for high-voltage applications. However, the relatively low current discharging capability makes MOS devices as the secondary choice. Silicon-controlled rectifier (SCR) has become famous due to its high robustness and area efficiency, compared to diode and MOS. In this dissertation, a comprehensive design methodology for SCR based on simulation and measurement are presented for different advanced commercial technologies. Furthermore, an ESD clamp is designed and verified for the first time for the emerging GaN technology.For the SCR, no matter what modification is going to be made, the first concern when drawing the layout is to determine the layout geometrical style, finger width and finger number. This problem for diode and MOS device were studied in detail, so the same method was usually used in SCR. The research in this dissertation provides a closer look into the metal layout effect to the SCR, finding out the optimized robustness and minimized side-effect can be obtained by using specific layout geometry. Another concern about SCR is the relatively low turn-on speed when the IOs under protection is stressed by ESD pulses having very fast rising time, e.g., CDM and IEC 61000-4-2 pulses. On this occasion a large overshoot voltage is generated and cause damage to internal circuit component like gate oxides of MOS devices. The key determination of turn-on speed of SCR is physically investigated, followed by a novel design on SCR by directly connecting the Anode Gate and Cathode Gate to form internal trigger (DCSCR), with improved performance verified experimentally in this dissertation. The overshoot voltage and trigger voltage of the DCSCR will be significantly reduced, in return a better protection for internal circuit component is offered without scarifying neither area or robustness. Even though two SCR's with single direction of ESD current path can be constructed in reverse parallel to form bidirectional protection to pins, stand-alone bidirectional SCR (BSCR) is always desirable for sake of smaller area. The inherent high trigger voltage of BSCR that only fit in high-voltage technologies is overcome by embedding a PMOS transistor as trigger element, making it highly suitable for low-voltage ESD protection applications. More than that, this modification simultaneously introduces benefits including high robustness and low overshoot voltage.For high voltage pins, however, it presents another story for ESD designs. The high operation voltages require that a high trigger voltage and high holding voltage, so as to reduce the false trigger and latch-up risk. For several capacitive pins, the displacement current induced by a large snapback will cause severe damage to internal circuits. A novel design on SCR is proposed to minimize the snapback with adjustable trigger and holding voltage. Thanks to the additional a PIN diode, the similar high robustness and stable thermal leakage performance to SCR is maintained. For academic purpose of ESD design, it is always difficult to obtain the complete process deck in TCAD simulation because those information are highly confidential to the companies. Another challenge of using TCAD is the difficulty of maintaining the accuracy of physics models and predicting the performance of the other structures. In this dissertation a TCAD-aid ESD design methodology is used to evaluate ESD performance before the silicon shuttle.GaN is a promising material for high-voltage high-power RF application compared to the GaAs. However, distinct from GaAs, the leaky problem of the schottky junction and the lack of choice of passive/active components in GaN technology limit the ESD protection design, which will be discussed in this dissertation. However, a promising ESD protection clamp is finally developed based on depletion-mode pHEMT with adjustable trigger voltage, reasonable leakage current and high robustness.
Show less - Date Issued
- 2015
- Identifier
- CFE0006060, ucf:50989
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0006060
- Title
- design, characterization and analysis of component level electrostatic discharge (esd) protection solutions.
- Creator
-
Luo, Sirui, Liou, Juin, Yuan, Jiann-Shiun, Gong, Xun, Jin, Yier, Salcedo, Javier, University of Central Florida
- Abstract / Description
-
Electrostatic Discharges (ESD) is a significant hazard to electronic components and systems. Based on a specific process technology, a given circuit application requires a customized ESD consideration that meets all the requirements such as the core circuit's operating condition, maximum accepted leakage current, breakdown conditions for the process and overall device sizes. In every several years, there will be a new process technology becomes mature, and most of those new technology...
Show moreElectrostatic Discharges (ESD) is a significant hazard to electronic components and systems. Based on a specific process technology, a given circuit application requires a customized ESD consideration that meets all the requirements such as the core circuit's operating condition, maximum accepted leakage current, breakdown conditions for the process and overall device sizes. In every several years, there will be a new process technology becomes mature, and most of those new technology requires custom design of effective ESD protection solution. And usually the design window will shrinks due to the evolving of the technology becomes smaller and smaller. The ESD related failure is a major IC reliability concern and results in a loss of millions dollars each year in the semiconductor industry. To emulate the real word stress condition, several ESD stress models and test methods have been developed. The basic ESD models are Human Body model (HBM), Machine Mode (MM), and Charge Device Model (CDM). For the system-level ESD robustness, it is defined by different standards and specifications than component-level ESD requirements. International Electrotechnical Commission (IEC) 61000-4-2 has been used for the product and the Human Metal Model (HMM) has been used for the system at the wafer level.Increasingly stringent design specifications are forcing original equipment manufacturers (OEMs) to minimize the number of off-chip components. This is the case in emerging multifunction mobile, industrial, automotive and healthcare applications. It requires a high level of ESD robustness and the integrated circuit (IC) level, while finding ways to streamline the ESD characterization during early development cycle. To enable predicting the ESD performance of IC's pins that are directly exposed to a system-level stress condition, a new the human metal model (HMM) test model has been introduced. In this work, a new testing methodology for product-level HMM characterization is introduced. This testing framework allows for consistently identifying ESD-induced failures in a product, substantially simplifying the testing process, and significantly reducing the product evaluation time during development cycle. It helps eliminates the potential inaccuracy provided by the conventional characterization methodology. For verification purposes, this method has been applied to detect the failures of two different products.Addition to the exploration of new characterization methodology that provides better accuracy, we also have looked into the protection devices itself. ICs for emerging high performance precision data acquisition and transceivers in industrial, automotive and wireless infrastructure applications require effective and ESD protection solutions. These circuits, with relatively high operating voltages at the Input/Output (I/O) pins, are increasingly being designed in low voltage Complementary Metal-Oxide-Semiconductor (CMOS) technologies to meet the requirements of low cost and large scale integration. A new dual-polarity SCR optimized for high bidirectional blocking voltages, high trigger current and low capacitance is realized in a sub 3-V, 180-nm CMOS process. This ESD device is designed for a specific application where the operating voltage at the I/O is larger than that of the core circuit. For instance, protecting high voltage swing I/Os in CMOS data acquisition system (DAS) applications. In this reference application, an array of thin film resistors voltage divider is directly connected to the interface pin, reducing the maximum voltage that is obtained at the core device input down to (&)#177; 1-5 V. Its ESD characteristics, including the trigger voltage and failure current, are compared against those of a typical CMOS-based SCR.Then, we have looked into the ESD protection designs into more advanced technology, the 28-nm CMOS. An ESD protection design builds on the multiple discharge-paths ESD cell concept and focuses the attention on the detailed design, optimization and realization of the in-situ ESD protection cell for IO pins with variable operation voltages. By introducing different device configurations fabricated in a 28-nm CMOS process, a greater flexibility in the design options and design trade-offs can be obtained in the proposed topology, thus achieving a higher integration and smaller cell size definition for multi-voltage compatibility interface ESD protection applications. This device is optimized for low capacitance and synthesized with the circuit IO components for in-situ ESD protection in communication interface applications developed in a 28-nm, high-k, and metal-gate CMOS technology.ESD devices have been used in different types of applications and also at different environment conditions, such as high temperature. At the last section of this research work, we have performed an investigation of several different ESD devices' performance under various temperature conditions. And it has been shown that the variations of the device structure can results different ESD performance, and some devices can be used at the high temperature and some cannot. And this investigation also brings up a potential threat to the current ESD protection devices that they might be very vulnerable to the latch-up issue at the higher temperature range.
Show less - Date Issued
- 2015
- Identifier
- CFE0005655, ucf:50189
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0005655
- Title
- DESIGN, CHARACTERIZATION AND COMPACT MODELING OF NOVEL SILICON CONTROLLED RECTIFIER (SCR)-BASED DEVICES FOR ELECTROSTATIC DISCHARGE (ESD) PROTECTION APPLICATIONS IN INTEGRATED CIRCUITS.
- Creator
-
Lou, Lifang, Liou, Juin J., University of Central Florida
- Abstract / Description
-
Electrostatic Discharge (ESD), an event of a sudden transfer of electrons between two bodies at different potentials, happens commonly throughout nature. When such even occurs on integrated circuits (ICs), ICs will be damaged and failures result. As the evolution of semiconductor technologies, increasing usage of automated equipments and the emerging of more and more complex circuit applications, ICs are more sensitive to ESD strikes. Main ESD events occurring in semiconductor industry have...
Show moreElectrostatic Discharge (ESD), an event of a sudden transfer of electrons between two bodies at different potentials, happens commonly throughout nature. When such even occurs on integrated circuits (ICs), ICs will be damaged and failures result. As the evolution of semiconductor technologies, increasing usage of automated equipments and the emerging of more and more complex circuit applications, ICs are more sensitive to ESD strikes. Main ESD events occurring in semiconductor industry have been standardized as human body model (HBM), machine model (MM), charged device model (CDM) and international electrotechnical commission model (IEC) for control, monitor and test. In additional to the environmental control of ESD events during manufacturing, shipping and assembly, incorporating on-chip ESD protection circuits inside ICs is another effective solution to reduce the ESD-induced damage. This dissertation presents design, characterization, integration and compact modeling of novel silicon controlled rectifier (SCR)-based devices for on-chip ESD protection. The SCR-based device with a snapback characteristic has long been used to form a VSS-based protection scheme for on-chip ESD protection over a broad rang of technologies because of its low on-resistance, high failure current and the best area efficiency. The ESD design window of the snapback device is defined by the maximum power supply voltage as the low edge and the minimum internal circuitry breakdown voltage as the high edge. The downscaling of semiconductor technology keeps on squeezing the design window of on-chip ESD protection. For the submicron process and below, the turn-on voltage and sustain voltage of ESD protection cell should be lower than 10 V and higher than 5 V, respectively, to avoid core circuit damages and latch-up issue. This presents a big challenge to device/circuit engineers. Meanwhile, the high voltage technologies push the design window to another tough range whose sustain voltage, 45 V for instance, is hard for most snapback ESD devices to reach. Based on the in-depth elaborating on the principle of SCR-based devices, this dissertation first presents a novel unassisted, low trigger- and high holding-voltage SCR (uSCR) which can fit into the aforesaid ESD design window without involving any extra assistant circuitry to realize an area-efficient on-chip ESD protection for low voltage applications. The on-chip integration case is studied to verify the protection effectiveness of the design. Subsequently, this dissertation illustrate the development of a new high holding current SCR (HHC-SCR) device for high voltage ESD protection with increasing the sustain current, not the sustain voltage, of the SCR device to the latchup-immune level to avoid sacrificing the ESD protection robustness of the device. The ESD protection cells have been designed either by using technology computer aided design (TCAD) tools or through trial-and-error iterations, which is cost- or time-consuming or both. Also, the interaction of ESD protection cells and core circuits need to be identified and minimized at pre-silicon stage. It is highly desired to design and evaluate the ESD protection cell using simulation program with integrated circuit emphasis (SPICE)-like circuit simulation by employing compact models in circuit simulators. And the compact model also need to predict the response of ESD protection cells to very fast transient ESD events such as CDM event since it is a major ESD failure mode. The compact model for SCR-based device is not widely available. This dissertation develops a macromodeling approach to build a comprehensive SCR compact model for CDM ESD simulation of complete I/O circuit. This modeling approach offers simplicity, wide availability and compatibility with most commercial simulators by taking advantage of using the advanced BJT model, Vertical Bipolar Inter-Company (VBIC) model. SPICE Gummel-Poon (SGP) model has served the ICs industry well for over 20 years while it is not sufficiently accurate when using SGP model to build a compact model for ESD protection SCR. This dissertation seeks to compare the difference of SCR compact model built by using VBIC and conventional SGP in order to point out the important features of VBIC model for building an accurate and easy-CAD implement SCR model and explain why from device physics and model theory perspectives.
Show less - Date Issued
- 2008
- Identifier
- CFE0002374, ucf:47788
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0002374
- Title
- DESIGN AND CHARACTERIZATION OF NOVELDEVICES FOR NEW GENERATION OF ELECTROSTATICDISCHARGE (ESD) PROTECTION STRUCTURES.
- Creator
-
SALCEDO, Javier, Liou, Juin, University of Central Florida
- Abstract / Description
-
The technology evolution and complexity of new circuit applications involve emerging reliability problems and even more sensitivity of integrated circuits (ICs) to electrostatic discharge (ESD)-induced damage. Regardless of the aggressive evolution in downscaling and subsequent improvement in applications' performance, ICs still should comply with minimum standards of ESD robustness in order to be commercially viable. Although the topic of ESD has received attention industry-wide, the...
Show moreThe technology evolution and complexity of new circuit applications involve emerging reliability problems and even more sensitivity of integrated circuits (ICs) to electrostatic discharge (ESD)-induced damage. Regardless of the aggressive evolution in downscaling and subsequent improvement in applications' performance, ICs still should comply with minimum standards of ESD robustness in order to be commercially viable. Although the topic of ESD has received attention industry-wide, the design of robust protection structures and circuits remains challenging because ESD failure mechanisms continue to become more acute and design windows less flexible. The sensitivity of smaller devices, along with a limited understanding of the ESD phenomena and the resulting empirical approach to solving the problem have yielded time consuming, costly and unpredictable design procedures. As turnaround design cycles in new technologies continue to decrease, the traditional trial-and-error design strategy is no longer acceptable, and better analysis capabilities and a systematic design approach are essential to accomplish the increasingly difficult task of adequate ESD protection-circuit design. This dissertation presents a comprehensive design methodology for implementing custom on-chip ESD protection structures in different commercial technologies. First, the ESD topic in the semiconductor industry is revised, as well as ESD standards and commonly used schemes to provide ESD protection in ICs. The general ESD protection approaches are illustrated and discussed using different types of protection components and the concept of the ESD design window. The problem of implementing and assessing ESD protection structures is addressed next, starting from the general discussion of two design methods. The first ESD design method follows an experimental approach, in which design requirements are obtained via fabrication, testing and failure analysis. The second method consists of the technology computer aided design (TCAD)-assisted ESD protection design. This method incorporates numerical simulations in different stages of the ESD design process, and thus results in a more predictable and systematic ESD development strategy. Physical models considered in the device simulation are discussed and subsequently utilized in different ESD designs along this study. The implementation of new custom ESD protection devices and a further integration strategy based on the concept of the high-holding, low-voltage-trigger, silicon controlled rectifier (SCR) (HH-LVTSCR) is demonstrated for implementing ESD solutions in commercial low-voltage digital and mixed-signal applications developed using complementary metal oxide semiconductor (CMOS) and bipolar CMOS (BiCMOS) technologies. This ESD protection concept proposed in this study is also successfully incorporated for implementing a tailored ESD protection solution for an emerging CMOS-based embedded MicroElectroMechanical (MEMS) sensor system-on-a-chip (SoC) technology. Circuit applications that are required to operate at relatively large input/output (I/O) voltage, above/below the VDD/VSS core circuit power supply, introduce further complications in the development and integration of ESD protection solutions. In these applications, the I/O operating voltage can extend over one order of magnitude larger than the safe operating voltage established in advanced technologies, while the IC is also required to comply with stringent ESD robustness requirements. A practical TCAD methodology based on a process- and device- simulation is demonstrated for assessment of the device physics, and subsequent design and implementation of custom P1N1-P2N2 and coupled P1N1-P2N2//N2P3-N3P1 silicon controlled rectifier (SCR)-type devices for ESD protection in different circuit applications, including those applications operating at I/O voltage considerably above/below the VDD/VSS. Results from the TCAD simulations are compared with measurements and used for developing technology- and circuit-adapted protection structures, capable of blocking large voltages and providing versatile dual-polarity symmetric/asymmetric S-type current-voltage characteristics for high ESD protection. The design guidelines introduced in this dissertation are used to optimize and extend the ESD protection capability in existing CMOS/BiCMOS technologies, by implementing smaller and more robust single- or dual-polarity ESD protection structures within the flexibility provided in the specific fabrication process. The ESD design methodologies and characteristics of the developed protection devices are demonstrated via ESD measurements obtained from fabricated stand-alone devices and on-chip ESD protections. The superior ESD protection performance of the devices developed in this study is also successfully verified in IC applications where the standard ESD protection approaches are not suitable to meet the stringent area constraint and performance requirement.
Show less - Date Issued
- 2006
- Identifier
- CFE0001213, ucf:46942
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0001213