View All Items
(1 - 3 of 3)
- Title
- COMPARISON OF THM FORMATION DURING DISINFECTION: FERRATE VERSUS FREE CHLORINE FOR DIFFERENT SOURCE WATERS.
- Creator
-
Mukattash, Adhem, Randall, Andrew, University of Central Florida
- Abstract / Description
-
The objective of the study was to compare the trihalomethanes (THMs) produced from ferrate with hypochlorite and to determine how different the THM production would be for a given degree of disinfection (3 log reduction in Heterotrophic Plate Count (HPC)). Different water samples were collected from Lake Claire, Atlantic Ocean, and secondary effluent from an advanced wastewater treatment plant. THM formation was determined using a standard assay over 7 days at room temperature. In addition...
Show moreThe objective of the study was to compare the trihalomethanes (THMs) produced from ferrate with hypochlorite and to determine how different the THM production would be for a given degree of disinfection (3 log reduction in Heterotrophic Plate Count (HPC)). Different water samples were collected from Lake Claire, Atlantic Ocean, and secondary effluent from an advanced wastewater treatment plant. THM formation was determined using a standard assay over 7 days at room temperature. In addition samples were tested for Total Coliform Escherichia coli (TC/E.coli), and heterotrophic bacteria using HPC by spreadplating on R2A agar. Dissolved organic carbon (DOC) was measured as well. Dosages of 2, 5, and 10 ppm of hypochlorite and ferrate were used for Lake Claire and Atlantic Ocean water, while 1, 2, and 5 ppm dosages were used for wastewater treatment effluent. Ferrate resulted in 48.3% ± 11.2% less THM produced for the same level of disinfection (i.e. approximately 3 logs reduction in HPC). Oxidation of DOC was relatively small with a 6.1 to 11.6 % decrease in DOC being observed for ferrate doses from 2 to 10 mg/L. Free chlorine oxidation of DOC was negligible.
Show less - Date Issued
- 2007
- Identifier
- CFE0001734, ucf:47324
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0001734
- Title
- An Assessment of Biosorption Activated Media for the Removal of Pollutants in Up-Flow Stormwater Treatment Systems.
- Creator
-
Hood, Andrew, Randall, Andrew, Wanielista, Martin, Chopra, Manoj, O'Reilly, Andrew, Moore, Sean, University of Central Florida
- Abstract / Description
-
Nitrogen and phosphorus are often the limiting nutrients for marine and freshwater systems respectively. Additionally, stormwater often contains elevated levels of pathogens which can pollute the receiving water body and impact reuse applications [1-4]. The reduction of limiting nutrients and pathogens is a common primary target for stormwater best management practices (BMPs) [5]. Traditional BMPs, such as retention/detention treatment ponds require large footprints and may not be practical...
Show moreNitrogen and phosphorus are often the limiting nutrients for marine and freshwater systems respectively. Additionally, stormwater often contains elevated levels of pathogens which can pollute the receiving water body and impact reuse applications [1-4]. The reduction of limiting nutrients and pathogens is a common primary target for stormwater best management practices (BMPs) [5]. Traditional BMPs, such as retention/detention treatment ponds require large footprints and may not be practical in ultra-urban environments where above ground space is limited. Upflow filters utilizing biosorption activated media (BAM) that can be placed underground offer a small footprint alternative. Additionally, BAM upflow filters can be installed at the discharge point of traditional stormwater ponds to provide further treatment. This research simulated stormwater that had already been treated for solids removal; thus, most of the nutrients and solids in the influent were assumed to be as non-settable suspended solids or dissolved solids. Three different BAM mixtures in an upflow filter configuration were compared for the parameters of nitrogen, phosphorus, total coliform, E. coli, and heterotrophic plate count (HPC). Additionally, genetic testing was conducted using Polymerase Chain Reaction (PCR), in conjunction with a nitrogen mass balance, to determine if Anammox was a significant player in the nitrogen removal. The columns were run at both 22-minute and 220-minute Empty Bed Contact Times (EBCTs). All the BAM mixtures analyzed were shown to be capable at the removal of nitrogen, phosphorus, and total coliform during both the 22-minute and 220-minute EBCTs, with BAM #1 having the highest removal performance for all three parameters during both EBCTs. All BAM mixtures experienced an increase in HPC. Additionally, PCR analysis confirmed the presence of Anammox in the biofilm and via mass balance it was determined that the biological nitrogen removal was due to Anammox and endogenous denitrification with Anammox being a significant mechanism.
Show less - Date Issued
- 2019
- Identifier
- CFE0007817, ucf:52875
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0007817
- Title
- Adaptive Architectural Strategies for Resilient Energy-Aware Computing.
- Creator
-
Ashraf, Rizwan, DeMara, Ronald, Lin, Mingjie, Wang, Jun, Jha, Sumit, Johnson, Mark, University of Central Florida
- Abstract / Description
-
Reconfigurable logic or Field-Programmable Gate Array (FPGA) devices have the ability to dynamically adapt the computational circuit based on user-specified or operating-condition requirements. Such hardware platforms are utilized in this dissertation to develop adaptive techniques for achieving reliable and sustainable operation while autonomously meeting these requirements. In particular, the properties of resource uniformity and in-field reconfiguration via on-chip processors are exploited...
Show moreReconfigurable logic or Field-Programmable Gate Array (FPGA) devices have the ability to dynamically adapt the computational circuit based on user-specified or operating-condition requirements. Such hardware platforms are utilized in this dissertation to develop adaptive techniques for achieving reliable and sustainable operation while autonomously meeting these requirements. In particular, the properties of resource uniformity and in-field reconfiguration via on-chip processors are exploited to implement Evolvable Hardware (EHW). EHW utilize genetic algorithms to realize logic circuits at runtime, as directed by the objective function. However, the size of problems solved using EHW as compared with traditional approaches has been limited to relatively compact circuits. This is due to the increase in complexity of the genetic algorithm with increase in circuit size. To address this research challenge of scalability, the Netlist-Driven Evolutionary Refurbishment (NDER) technique was designed and implemented herein to enable on-the-fly permanent fault mitigation in FPGA circuits. NDER has been shown to achieve refurbishment of relatively large sized benchmark circuits as compared to related works. Additionally, Design Diversity (DD) techniques which are used to aid such evolutionary refurbishment techniques are also proposed and the efficacy of various DD techniques is quantified and evaluated.Similarly, there exists a growing need for adaptable logic datapaths in custom-designed nanometer-scale ICs, for ensuring operational reliability in the presence of Process, Voltage, and Temperature (PVT) and, transistor-aging variations owing to decreased feature sizes for electronic devices. Without such adaptability, excessive design guardbands are required to maintain the desired integration and performance levels. To address these challenges, the circuit-level technique of Self-Recovery Enabled Logic (SREL) was designed herein. At design-time, vulnerable portions of the circuit identified using conventional Electronic Design Automation tools are replicated to provide post-fabrication adaptability via intelligent techniques. In-situ timing sensors are utilized in a feedback loop to activate suitable datapaths based on current conditions that optimize performance and energy consumption. Primarily, SREL is able to mitigate the timing degradations caused due to transistor aging effects in sub-micron devices by reducing the stress induced on active elements by utilizing power-gating. As a result, fewer guardbands need to be included to achieve comparable performance levels which leads to considerable energy savings over the operational lifetime.The need for energy-efficient operation in current computing systems has given rise to Near-Threshold Computing as opposed to the conventional approach of operating devices at nominal voltage. In particular, the goal of exascale computing initiative in High Performance Computing (HPC) is to achieve 1 EFLOPS under the power budget of 20MW. However, it comes at the cost of increased reliability concerns, such as the increase in performance variations and soft errors. This has given rise to increased resiliency requirements for HPC applications in terms of ensuring functionality within given error thresholds while operating at lower voltages. My dissertation research devised techniques and tools to quantify the effects of radiation-induced transient faults in distributed applications on large-scale systems. A combination of compiler-level code transformation and instrumentation are employed for runtime monitoring to assess the speed and depth of application state corruption as a result of fault injection. Finally, fault propagation models are derived for each HPC application that can be used to estimate the number of corrupted memory locations at runtime. Additionally, the tradeoffs between performance and vulnerability and the causal relations between compiler optimization and application vulnerability are investigated.
Show less - Date Issued
- 2015
- Identifier
- CFE0006206, ucf:52889
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0006206
