Current Search:   tellurites (x)

View All Items

  • CSV Spreadsheet
(1 - 3 of 3)
Processing of Advanced Infrared Materials
Title
Processing of Advanced Infrared Materials.
Creator
Mcgill, Daniel, Richardson, Kathleen, Gaume, Romain, Christodoulides, Demetrios, Rivero Baleine, Clara, University of Central Florida
Abstract / Description
Infrared transparent glassy and crystalline materials often have unique and complex processing requirements but are an important class of materials for such applications as optical windows, lenses, waveplates, polarizers and beam splitters. This thesis investigates two specific materials, one amorphous and one crystalline, that are candidates for use in the short and midwave-infrared and mid and longwave infrared, respectively. It is demonstrated that an innovative uniaxial sintering process,...
Show moreInfrared transparent glassy and crystalline materials often have unique and complex processing requirements but are an important class of materials for such applications as optical windows, lenses, waveplates, polarizers and beam splitters. This thesis investigates two specific materials, one amorphous and one crystalline, that are candidates for use in the short and midwave-infrared and mid and longwave infrared, respectively. It is demonstrated that an innovative uniaxial sintering process, which uses a sacrificial pressure-transmitting medium, can be used to fully densify a 70TeO2-20WO3-10La2O3 (TWL) glass powder. The characteristics of the sintered TWL glass is compared to that of a parent glass produced through a conventional melt/quench process to ascertain the impact of process-specific property changes on the resulting material. Additionally, the design, construction and characterization of a custom-made transparent Bridgman crystal growth furnace is undertaken to enable growth of highly birefringent tellurium single crystal. The key obstacles that need to be overcome to scale up the size of the grown crystals are summarized with the end goal of producing commercial grade optical elements.
Show less
Date Issued
2019
Identifier
CFE0007894, ucf:52761
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0007894
HIGH GAIN / BROADBAND OXIDE GLASSES FOR NEXT GENERATION RAMAN AMPLIFIERS
Title
HIGH GAIN / BROADBAND OXIDE GLASSES FOR NEXT GENERATION RAMAN AMPLIFIERS.
Creator
Rivero, Clara, Stegeman, George, University of Central Florida
Abstract / Description
Interest in Raman amplification has undergone a revival due to the rapidly increasing bandwidth requirements for communications transmission, both for long haul and local area networks, and recent developments in the telecom fiber industry and diode laser technology. In contrast to rare earth doped fiber amplifiers, for which the range of wavelengths is fixed and limited, Raman gain bandwidths are larger and the operating wavelength is fixed only by the pump wavelength and the bandwidth of...
Show moreInterest in Raman amplification has undergone a revival due to the rapidly increasing bandwidth requirements for communications transmission, both for long haul and local area networks, and recent developments in the telecom fiber industry and diode laser technology. In contrast to rare earth doped fiber amplifiers, for which the range of wavelengths is fixed and limited, Raman gain bandwidths are larger and the operating wavelength is fixed only by the pump wavelength and the bandwidth of the Raman active medium. In this context, glasses are the material of choice for this application due to their relatively broad spectral response, and ability of making them into optical fiber. This dissertation summarizes findings on different oxide-based glasses that have been synthesized and characterized for their potential application as Raman gain media. Two main glass families were investigated: phosphate-based glass matrices for broadband Raman gain application and TeO2-based glasses for high Raman gain amplification. A phosphate network was preferred for the broadband application since the phosphate Raman active modes can provide amplification above 1000 cm-1, whilst TeO2-based glasses were selected for the high gain application due to their enhanced nonlinearities and polarizabilities among the other oxide-based network formers. The results summarized in this dissertation show that phosphate-based glasses can provide Raman amplification bandwidths of up to 40 THz, an improvement of almost 5 times the bandwidth of SiO2. On the other hand, tellurite-based glasses appear to be promising candidates for high gain discrete Raman applications, providing peak Raman gain coefficients of up to 50 times higher than SiO2, at 1064 nm. Although, visible spontaneous Raman scattering cross-section measurement is the most frequently used tool for estimating the strength and spectral distribution of Raman gain in materials, especially glasses, there are some issues that one needs to be aware when conducting these measurements near the absorption band edge of the material. This led to the detection of an inherent frequency-dispersion in the Raman susceptibility and a resonant enhancement phenomenon when measurements were conducted near the absorption edge of the material.
Show less
Date Issued
2005
Identifier
CFE0000752, ucf:46554
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0000752
DIRECT NONLINEAR OPTICS MEASUREMENTS OF RAMAN GAIN IN BULK GLASSES AND ESTIMATES OF FIBER PERFORMANCE
Title
DIRECT NONLINEAR OPTICS MEASUREMENTS OF RAMAN GAIN IN BULK GLASSES AND ESTIMATES OF FIBER PERFORMANCE.
Creator
Stegeman, Robert, Delfyett, Peter, University of Central Florida
Abstract / Description
The need for more bandwidth in communications has stimulated the search for new fiberizable materials with properties superior to fused silica which is the current state-of-the-art. One of the key properties is Raman gain by which a pump beam amplifies a signal beam of longer wavelength. An apparatus capable of directly measuring the spectral dependence and absolute magnitude of the material Raman gain coefficient using nonlinear optics techniques has been built. Using radiation from a 1064...
Show moreThe need for more bandwidth in communications has stimulated the search for new fiberizable materials with properties superior to fused silica which is the current state-of-the-art. One of the key properties is Raman gain by which a pump beam amplifies a signal beam of longer wavelength. An apparatus capable of directly measuring the spectral dependence and absolute magnitude of the material Raman gain coefficient using nonlinear optics techniques has been built. Using radiation from a 1064 nm Nd:YAG laser as the pump and from a tunable Optical Parametric Generator and Amplifier as the signal, the Raman gain spectrum was measured for different families of glass samples with millimeter thickness. A number of glass families were investigated. Tellurites with added oxides of tungsten, niobium, and thallium produced the largest Raman gain coefficients of any oxide family reported to date, typically 30-50 times higher than that of fused silica. On the other hand, phosphate families were found with spectrally broad Raman gain response, 5 times broader than fused silica and flat to „b3dB over the full spectral range in some compositions. Although the chalcogenides were found to photodamage easily, coefficients 50 - 80 times that of fused silica were measured. Finally, a numerical study was undertaken to predict the theoretical performance and noise properties of tellurite fibers for communications. Included in the computer modeling were linear loss; the interaction among multiple pumps and signals; forward and/or backward propagating pump beams; forward, backward and double Rayleigh scattering; noise properties of amplifiers; excess noise, etc. This led to a comparison of the optical signal-to-noise characteristics for Raman gain in a tellurite versus a silica fiber.
Show less
Date Issued
2006
Identifier
CFE0000928, ucf:46739
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0000928