Current Search: thulium fiber laser (x)
View All Items
(1 - 8 of 8)
- Title
- High Average Power Nanosecond Pulsed Tm:Fiber Laser for Pumping an Optical Parametric Oscillator.
- Creator
-
Abdulfattah, Ali, Richardson, Martin, Shah, Lawrence, Delfyett, Peter, University of Central Florida
- Abstract / Description
-
Thulium-doped fiber lasers operating with wavelengths in the vicinity of 2 (&)#181;m are useful for several emerging applications including generating mid-IR light via nonlinear frequency conversion. In this study we describe the design and construction of a thulium fiber laser system comprising a master oscillator and a power amplifier. The first stage is a Q-switched, thulium-doped photonic crystal fiber oscillator utilizing an acousto-optic modulator to produce 65-80 nanosecond pulses. A...
Show moreThulium-doped fiber lasers operating with wavelengths in the vicinity of 2 (&)#181;m are useful for several emerging applications including generating mid-IR light via nonlinear frequency conversion. In this study we describe the design and construction of a thulium fiber laser system comprising a master oscillator and a power amplifier. The first stage is a Q-switched, thulium-doped photonic crystal fiber oscillator utilizing an acousto-optic modulator to produce 65-80 nanosecond pulses. A diffraction grating in the cavity provides wavelength tunability from 1.8 (-) 2?m. The oscillator produced up to 3 W of average power and 150 (&)#181;J pulse energies, corresponding to 2.3 kW peak powers. The amplifier stage consists of a large mode area, thulium-doped, step-index fiber seeded with powers up to 2 W from the oscillator. An output energy of 700 (&)#181;J with 81 ns pulse width, was achieved at a wavelength of 1.9 (&)#181;m. The effect of the fiber holder temperature on the amplifier performance relative to output pulse energy and seed wavelength was also studied. As a part of this thesis, a methodology has been developed to thoroughly characterize Tm:fiber amplifier performance. This has been the subject of prior work by several research groups, however, this work explicitly focuses on the precise characterization of absorbed pump power, pump bleaching, and extracted amplified energy for a range of input seeds power, pulse energy, and wavelength in order to better understand amplifier performance.
Show less - Date Issued
- 2016
- Identifier
- CFE0006240, ucf:51065
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0006240
- Title
- POWER SCALING OF LARGE MODE AREA THULIUM FIBER LASERS IN VARIOUS SPECTRAL AND TEMPORAL REGIMES.
- Creator
-
McComb, Timothy, Richardson, Martin, University of Central Florida
- Abstract / Description
-
High power thulium fiber lasers are interesting for a myriad of applications due to their potential for high average output power, excellent beam quality, compactness, portability, high operating efficiency and broad, eye-safe spectral range from 1.8-2.1 microns. Currently, the majority of thulium laser research effort is being invested into scaling average output powers; however, such output powers are being scaled with no degree of control on laser system output spectrum or temporal...
Show moreHigh power thulium fiber lasers are interesting for a myriad of applications due to their potential for high average output power, excellent beam quality, compactness, portability, high operating efficiency and broad, eye-safe spectral range from 1.8-2.1 microns. Currently, the majority of thulium laser research effort is being invested into scaling average output powers; however, such output powers are being scaled with no degree of control on laser system output spectrum or temporal behavior. Thulium fiber laser technology is not useful for many of its most important applications without implementation of techniques enabling tunable, narrow spectral widths with appropriate pulse durations for particular applications. This work outlines several techniques for spectral control of thulium fiber lasers and investigates scaling of average laser powers while using these techniques to maintain a desired spectral output. In addition, an examination of operation in both nanosecond and picosecond pulsed regimes and scaling of average powers and pulse energies in these regimes to useful power levels is conducted. The demonstration of thulium fiber laser systems for applications in frequency conversion and spectral beam combination is also discussed. In addition to the experimental results, theoretical modeling of thulium fiber amplifier operation, simple thermal management analysis, as well as practical fiber and system design considerations for future power scaling are presented. Experimental and theoretical results of this work will enable the successful design of future extremely high power spectrally and temporally controlled thulium fiber laser systems.
Show less - Date Issued
- 2009
- Identifier
- CFE0002885, ucf:48045
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0002885
- Title
- 2 micron fiber lasers: power scaling concepts and limitations.
- Creator
-
Sincore, Alex, Richardson, Martin, Amezcua Correa, Rodrigo, Schulzgen, Axel, Shah, Lawrence, University of Central Florida
- Abstract / Description
-
Thulium- and holmium-doped fiber lasers (TDF and HDF) emitting at 2 micron offer unique benefits and applications compared to common ytterbium-doped 1 micron lasers. This dissertation details the concepts, limitations, design, and performance of four 2 micron fiber laser systems. While these lasers were developed for various end-uses, they also provide further insight into two major power scaling limitations. The first limitation is optical nonlinearities: specifically stimulated Brillouin...
Show moreThulium- and holmium-doped fiber lasers (TDF and HDF) emitting at 2 micron offer unique benefits and applications compared to common ytterbium-doped 1 micron lasers. This dissertation details the concepts, limitations, design, and performance of four 2 micron fiber laser systems. While these lasers were developed for various end-uses, they also provide further insight into two major power scaling limitations. The first limitation is optical nonlinearities: specifically stimulated Brillouin scattering (SBS) and modulation instability (MI). The second limitation is thermal failure due to inefficient pump conversion. First, a 21.5 W single-frequency, single-mode laser with adjustable output from continuous-wave to nanosecond pulses is developed. Measuring the SBS threshold versus pulse duration enables the Brillouin gain coefficient and gain bandwidth to be determined at 2 micron. Second, a 23 W spectrally-broadband, nanosecond pulsed laser is constructed for materials processing applications. The temporally incoherent multi-kW peak power pulses can also efficiently produce MI and supercontinuum generation by adjusting the input spectral linewidth. Third, the measured performance of in-band pumped TDF and HDF lasers are compared with simulations. HDF displays low efficiencies, which is explained by including ion clustering in the simulations. The TDF operates with impressive (>)90% slope efficiencies. Based on this result, a system design for (>)1 kW average power TDF amplifier is described. The designed final amplifier will be in-band pumped to enable high efficiency and low thermal load. The amplifier efficiency, operating bandwidth, thermal load, and nonlinear limits are modeled and analyzed to provide a framework for execution. Overall, this dissertation provides further insight and understanding on the various processes that limit power scaling of 2 micron fiber lasers.
Show less - Date Issued
- 2018
- Identifier
- CFE0007374, ucf:52105
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0007374
- Title
- Single Mode Wavelength-Tunable Thulium Fiber.
- Creator
-
Shin, Dong Jin, Richardson, Martin, Schulzgen, Axel, Amezcua Correa, Rodrigo, University of Central Florida
- Abstract / Description
-
Thulium fiber lasers have the broadest emission wavelength bandwidth out of any rare-earth doped fiber lasers. The emission wavelength starts from 1.75(&)#181;m and ends at around 2.15(&)#181;m, covering a vast swath of the eye safe wavelength region and intersecting with a large portion of mid-infrared atmospheric transmission window. Also, thulium fiber lasers provide the highest average output power of any other rare-earth doped fiber lasers in these wavelength regimes, making them...
Show moreThulium fiber lasers have the broadest emission wavelength bandwidth out of any rare-earth doped fiber lasers. The emission wavelength starts from 1.75(&)#181;m and ends at around 2.15(&)#181;m, covering a vast swath of the eye safe wavelength region and intersecting with a large portion of mid-infrared atmospheric transmission window. Also, thulium fiber lasers provide the highest average output power of any other rare-earth doped fiber lasers in these wavelength regimes, making them uniquely suited for applications such as remote sensing. At the moment, high power beam propagation of continuous wave laser through the atmosphere in the mid-infrared range is yet to be investigated anywhere. In particular, the effects of atmospheric water vapors on the thulium fiber laser propagation are unknown and are of great research interest. This dissertation identifies the stringent requirements in constructing a high power, single frequency, wavelength tunable, continuous wave thulium fiber laser with the aim of using it to study various atmospheric transmission effects. A fine spectral control scheme using diffraction gratings is explored and improvements are made. Moreover, a fiber numerical simulation model is presented and is used for designing and implementing the thulium fiber laser system. The current limitations of the implemented system are discussed and an improved system is proposed. This will lay the foundation for the future high power atmospheric propagation studies.
Show less - Date Issued
- 2018
- Identifier
- CFE0007372, ucf:52084
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0007372
- Title
- Development of Thulium Fiber Lasers for High Average Power and High Peak Power Operation.
- Creator
-
Sims, Robert, Richardson, Martin, Schulzgen, Axel, Delfyett, Peter, Chow, Louis, University of Central Florida
- Abstract / Description
-
High power thulium fiber lasers are useful for a number of applications in both continuous-wave and pulsed operating regimes. The use of thulium as a dopant has recently gained interest due to its large bandwidth, possibility of high efficiency, possibility of high power and long wavelength ~1.8 (-) 2.1 ?m. The longer emission wavelength of Tm-doped fiber lasers compared to Yb- and/or Er-doped fiber lasers creates the possibility for higher peak power operation due to the larger nonlinear...
Show moreHigh power thulium fiber lasers are useful for a number of applications in both continuous-wave and pulsed operating regimes. The use of thulium as a dopant has recently gained interest due to its large bandwidth, possibility of high efficiency, possibility of high power and long wavelength ~1.8 (-) 2.1 ?m. The longer emission wavelength of Tm-doped fiber lasers compared to Yb- and/or Er-doped fiber lasers creates the possibility for higher peak power operation due to the larger nonlinear thresholds and reduced nonlinear phase accumulation. One primary interest in Tm-doped fiber lasers has been to scale to high average powers; however, the thermal and mechanical constraints of the fiber limit the average power out of a single-fiber aperture. One method to overcome the constraints of a single laser aperture is to spectrally combine the output from multiple lasers operating with different wavelengths into a single beam. In this thesis, results will be presented on the development of three polarized 100 W level laser systems that were wavelength stabilized for SBC. In addition to the development of the laser channels, the beams were combined using bandpass filters to achieve a single near diffraction-limited output.Concurrently, with the development of high average power systems there is an increasing interest in femotosecond pulse generation and amplification using Tm- doped fiber lasers. High peak power sources operating near 2 (&)#181;m have the potential to be efficient pump sources to generate mid-infrared light through supercontinuum generation or optical parametric oscillators. This thesis focuses on the development of a laser system utilizing chirped pulse amplification (CPA) to achieve record level energies and peak powers for ultrashort pulses in Tm-doped fiber. A mode-locked oscillator was built to generate femtosecond pulses operating with pJ energy. Pulses generated in the mode-locked oscillator were limited to low energies and contained spectral modulation due to the mode-locking mechanism, therefore, a Raman-soliton self-frequency shift (Raman-SSFS) amplifier was built to amplify pulses, decrease the pulse duration, and spectrally clean pulses. These pulses were amplified using chirped pulse amplification (CPA) in which, limiting factors for amplification were examined and a high peak power system was built. The primary limiting factors of CPA in fibers include the nonlinear phase accumulation, primarily through self-phase modulation (SPM), and gain narrowing. Gain narrowing was examined by temporally stretching pulses in a highly nonlinear fiber that both stretched the pulse duration and broadened the spectrum. A high peak power CPA system amplified pulses to 1 (&)#181;J energy with 300 fs compressed pulses, corresponding to a peak power (>)3 MW. High peak power pulses were coupled into highly nonlinear fibers to generate supercontinuum.
Show less - Date Issued
- 2012
- Identifier
- CFE0004752, ucf:49768
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0004752
- Title
- Peak Power Scaling of Nanosecond Pulses in Thulium based Fiber Lasers.
- Creator
-
Gaida, Christian, Richardson, Martin, Shah, Lawrence, Amezcua Correa, Rodrigo, University of Central Florida
- Abstract / Description
-
Thulium based fiber lasers represent a promising alternative for pulse energy scaling and highpeak power generation with ytterbium based systems at 1 micrometer. Advantages of thulium arise fromthe operation at longer wavelengths and a large gain bandwidth (1.8-2.1 micrometer). Nonlinear effects,such as self phase modulation, stimulated Raman scattering and stimulated Brillouin scattering generally limit peak power scaling in fiber lasers. The longer wavelength of thulium fiber lasersand...
Show moreThulium based fiber lasers represent a promising alternative for pulse energy scaling and highpeak power generation with ytterbium based systems at 1 micrometer. Advantages of thulium arise fromthe operation at longer wavelengths and a large gain bandwidth (1.8-2.1 micrometer). Nonlinear effects,such as self phase modulation, stimulated Raman scattering and stimulated Brillouin scattering generally limit peak power scaling in fiber lasers. The longer wavelength of thulium fiber lasersand large mode field areas can significantly increase the nonlinear thresholds. Compared to 1 micrometer systems, thulium fiber lasers enable single mode guidance for two times larger mode field diameterin step index fibers. Similar behavior is expected for index guiding thulium doped photonic crystalfibers.In this work a novel thulium doped rod type photonic crystal fiber design with large mode field diameter (>50 micrometer) was first characterized in CW-lasing configuration and then utilized as finalamplifier in a two stage master oscillator power amplifier. The system generated MW-level peakpower at 6.5ns pulse duration and 1kHz repetition rate. This world record performance exemplifiesthe potential of thulium fiber lasers to supersede ytterbium based systems for very high peak powergeneration in the future.As part of this work a computer model for the transient simulation of pulsed amplification inthulium based fiber lasers was developed. The simulations are in good agreement with the experimentalresults. The computer model can be used for efficient optimization of future thulium basedfiber amplifier designs.
Show less - Date Issued
- 2013
- Identifier
- CFE0004845, ucf:49699
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0004845
- Title
- Pulsed Tm-Fiber Laser for Mid-IR Generation.
- Creator
-
Kadwani, Pankaj, Richardson, Martin, Abouraddy, Ayman, Schulzgen, Axel, Peale, Robert, University of Central Florida
- Abstract / Description
-
Thulium fiber lasers have attracted interest based on their long emission wavelength and large bandwidth (~1.8 (-) 2.1 (&)#181;m) relative to more established ytterbium and erbium fiber lasers. In addition, Tm:fiber lasers offer the potential for high efficiencies (~60 %) and high output power levels both in cw as well as pulsed regimes. These attributes are useful particularly in applications such as remote sensing, materials processing and mid-infrared generation. This dissertation...
Show moreThulium fiber lasers have attracted interest based on their long emission wavelength and large bandwidth (~1.8 (-) 2.1 (&)#181;m) relative to more established ytterbium and erbium fiber lasers. In addition, Tm:fiber lasers offer the potential for high efficiencies (~60 %) and high output power levels both in cw as well as pulsed regimes. These attributes are useful particularly in applications such as remote sensing, materials processing and mid-infrared generation. This dissertation describes the development of novel nanosecond pulsed thulium fiber laser systems with record high peak power levels in order to pump nonlinear mid-infrared generation. The peak power scaling in thulium fiber lasers requires new fiber designs with ultra large mode field area (MFA). Two different classes of prototype thulium doped photonic crystal fibers (PCF) were investigated for high peak power generation. The first prototype is a flexible-PCF with 50 ?m core diameter, and the second is a rod-type PCF with 80 ?m diameter core. A robust single stage master oscillator power amplifier (MOPA) source based on flexible-PCF was developed. This source provided narrow linewidth, tunable wavelength, variable pulse duration, high peak power, and high energy nanosecond pulses. The PCF-rod was implemented as a second stage power amplifier. This system generated a record level of ~1 MW peak power output with 6.4 ns pulse-duration at 1 kHz repetition rate. This thulium doped PCF based MOPA system is a state of the art laser source providing high quality nanosecond pulses. The single stage MOPA system was successfully implemented to pump a zinc germanium phosphide (ZGP) crystal in an optical parametric oscillator (OPO) cavity to generate 3 - 5 (&)#181;m wavelengths. The MOPA source was also used to demonstrate backside machining in silicon wafer. The PCF based laser system demonstrated an order of magnitude increase in the peak power achievable in nanosecond thulium doped fiber laser systems, and further scaling appears possible. Further increases in the peak power will enable additional capabilities for mid-IR generation and associated applications.
Show less - Date Issued
- 2013
- Identifier
- CFE0005100, ucf:50739
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0005100
- Title
- Broad Bandwidth, All-fiber, Thulium-doped Photonic Crystal Fiber Amplifier for Potential Use in Scaling Ultrashort Pulse Peak Powers.
- Creator
-
Sincore, Alex, Richardson, Martin, Shah, Lawrence, Amezcua Correa, Rodrigo, University of Central Florida
- Abstract / Description
-
Fiber based ultrashort pulse laser sources are desirable for many applications; however generating high peak powers in fiber lasers is primarily limited by the onset of nonlinear effects such as self-phase modulation, stimulated Raman scattering, and self-focusing. Increasing the fiber core diameter mitigates the onset of these nonlinear effects, but also allows unwanted higher-order transverse spatial modes to propagate. Both large core diameters and single-mode propagation can be...
Show moreFiber based ultrashort pulse laser sources are desirable for many applications; however generating high peak powers in fiber lasers is primarily limited by the onset of nonlinear effects such as self-phase modulation, stimulated Raman scattering, and self-focusing. Increasing the fiber core diameter mitigates the onset of these nonlinear effects, but also allows unwanted higher-order transverse spatial modes to propagate. Both large core diameters and single-mode propagation can be simultaneously attained using photonic crystal fibers.Thulium-doped fiber lasers are attractive for high peak power ultrashort pulse systems. They offer a broad gain bandwidth, capable of amplifying sub-100 femtosecond pulses. The longer center wavelength at 2 ?m theoretically enables higher peak powers relative to 1 ?m systems since nonlinear effects inversely scale with wavelength. Also, the 2 ?m emission is desirable to support applications reaching further into the mid-IR.This work evaluates the performance of a novel all-fiber pump combiner that incorporates a thulium-doped photonic crystal fiber. This fully integrated amplifier is characterized and possesses a large gain bandwidth, essentially single-mode propagation, and high degree of polarization. This innovative all-fiber, thulium-doped photonic crystal fiber amplifier has great potential for enabling high peak powers in 2 ?m fiber systems; however the current optical-to-optical efficiency is low relative to similar free-space amplifiers. Further development and device optimization will lead to higher efficiencies and improved performance.
Show less - Date Issued
- 2014
- Identifier
- CFE0005260, ucf:50611
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0005260
