View All Items
(1 - 4 of 4)
- Title
- SCALABLE NANO PARTICLE PRODUCTION OF LOW BIOAVAILABILITY PHARMACEUTICALS FOR AUGMENTED AQUEOUS SOLUBILITY.
- Creator
-
Madden, Aaron, Deng, Wei Wei, University of Central Florida
- Abstract / Description
-
The billion dollar pharmaceutical research and development pipeline suffers greatly from high attrition rates of novel therapeutic compounds within pre-clinical and clinical trials. Poor bioavailability in many new drugs, originating in the various methodologies of high throughput screening, may explain part of these growing failure rates. One interpretation of this phenomenon relies on bioavailability's correlation with aqueous solubility; much modern processing allows chemicals to fully...
Show moreThe billion dollar pharmaceutical research and development pipeline suffers greatly from high attrition rates of novel therapeutic compounds within pre-clinical and clinical trials. Poor bioavailability in many new drugs, originating in the various methodologies of high throughput screening, may explain part of these growing failure rates. One interpretation of this phenomenon relies on bioavailability's correlation with aqueous solubility; much modern processing allows chemicals to fully develop without touching water, yielding upwards of 90% of new chemical entities practically insoluble in aqueous media. Thus, one approach to alleviating bioavailability and potentially clinical attrition rates necessitates augmented aqueous solubility. The amorphous nanoparticle presents the largest boost in aqueous solubility of a chemical through processing alone. In this contribution, we propose electrospray as a novel, competitive candidate to produce pharmaceutical amorphous nanoparticles with the intent of augmenting solubility. Electrospray represents an idyllic nominee for three reasons: repeatability, flexibility, and scalability. Electrospray offers low batch to batch variation with less than 30% relative standard deviation between various droplets. This triumphs over the several orders of magnitude in variation in pneumatic sprays. Electrospray's flexibility draws from its ability to attain diameters over several orders of magnitude, ranging from hundreds of microns to several nanometers; in this contribution droplets are produced between 500 nm and 1 [micro]m. Finally, electrospray displays scalability to any industrial requirement; though a single nozzle operates at mere microliters per hour, a single multiplexed array of emitters may increase this throughput by several orders of magnitude. This exploration, utilizing Indomethacin as a model low solubility chemical, verifies electrospray as a compatible processing tool for the pharmaceutical industry. Scanning electron microscopy coupled with the image analysis software ImageJ gleans the size and shape of emitted (and dried) particles. Amorphicity verification of particles employs grazing angle x-ray diffraction. Finally, ultraviolet and visual spectrum spectroscopy evaluates the solubility advantage of particles.
Show less - Date Issued
- 2014
- Identifier
- CFH0004546, ucf:45179
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFH0004546
- Title
- MAGNETIC PROPERTIES OF SPUTTER DEPOSITED FE-BASED AMORPHOUS THIN FILMS FOR RESONATOR APPLICATION.
- Creator
-
China, Chaitali, Coffey, Kevin, University of Central Florida
- Abstract / Description
-
In this study we investigate the magnetic properties of Fe-based amorphous thin films. Fe1-x-y-zBxSiyCz, Fe80-xNixB20, Fe80-xMnxB20, and Fe73-xMnxB27 films were deposited on silicon and glass substrates in a DC and RF magnetron sputtering system. Inductive magnetic measurements were performed to investigate the magnetic properties, including induced anisotropy and magnetostriction, of the as-deposited and annealed films using an M-H Looper. The chemical composition of the films was...
Show moreIn this study we investigate the magnetic properties of Fe-based amorphous thin films. Fe1-x-y-zBxSiyCz, Fe80-xNixB20, Fe80-xMnxB20, and Fe73-xMnxB27 films were deposited on silicon and glass substrates in a DC and RF magnetron sputtering system. Inductive magnetic measurements were performed to investigate the magnetic properties, including induced anisotropy and magnetostriction, of the as-deposited and annealed films using an M-H Looper. The chemical composition of the films was characterized using secondary ion mass spectroscopy (SIMS). The physical thickness of the films was determined by use of a stylus profilometer. The M-H Looper studies indicated that the induced anisotropy (Hk) depends strongly on the nickel concentration as well as on the annealing conditions, specifically the time and temperature of the annealing process. For the same metalloid concentration, the induced anisotropy has a maximum as a function of Ni. For the same nickel concentration and annealing time, it was found that the value of Hk decreases with the increase in annealing temperature. For each composition studied, low temperature long time annealing showed a higher value of Hk compared to high temperature short time annealing. From the magnetostriction values of Fe80-xNixB20 alloys, it was found that the sputter deposited films show similar trend but differ in magnitude when compared with ribbon samples. The magnetostriction of annealed thin films is found to be representative of ribbon samples. A potential composition modification to improve the strength of the field induced anisotropy is the addition of low levels of Mn.
Show less - Date Issued
- 2006
- Identifier
- CFE0001275, ucf:46896
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0001275
- Title
- AMORPHOUS PHASE FORMATION IN MECHANICALLY ALLOYED FE-BASED SYSTEMS.
- Creator
-
Sharma, Satyajeet, Suryanarayana, C, University of Central Florida
- Abstract / Description
-
ABSTRACT Bulk metallic glasses have interesting combination of physical, chemical, mechanical, and magnetic properties which make them attractive for a variety of applications. Consequently there has been a lot of interest in understanding the structure and properties of these materials. More varied applications can be sought if one understands the reasons for glass formation and the methods to control them. The glass-forming ability (GFA) of alloys can be substantially increased by a proper...
Show moreABSTRACT Bulk metallic glasses have interesting combination of physical, chemical, mechanical, and magnetic properties which make them attractive for a variety of applications. Consequently there has been a lot of interest in understanding the structure and properties of these materials. More varied applications can be sought if one understands the reasons for glass formation and the methods to control them. The glass-forming ability (GFA) of alloys can be substantially increased by a proper selection of alloying elements and the chemical composition of the alloy. High GFA will enable in obtaining large section thickness of amorphous alloys. Ability to produce glassy alloys in larger section thicknesses enables exploitation of these advanced materials for a variety of different applications. The technique of mechanical alloying (MA) is a powerful non-equilibrium processing technique and is known to produce glassy (or amorphous) alloys in several alloy systems. Metallic amorphous alloys have been produced by MA starting from either blended elemental metal powders or pre-alloyed powders. Subsequently, these amorphous alloy powders could be consolidated to full density in the temperature range between the glass transition and crystallization temperatures, where the amorphous phase has a very low viscosity. This Dissertation focuses on identifying the various Fe-based multicomponent alloy systems that can be amorphized using the MA technique, studying the GFA of alloys with emphasis on improving it, and also on analyzing the effect of extended milling time on the constitution of the amorphous alloy powder produced at earlier times. The Dissertation contains seven chapters, where the lead chapter deals with the background, history and introduction to bulk metallic glasses. The following four chapters are the published/to be published work, where the criterion for predicting glass formation, effect of Niobium addition on glass-forming ability (GFA), lattice contraction on amorphization, effect of Carbon addition on GFA, and observation of mechanical crystallization in Fe-based systems have been discussed. The subsequent chapter briefly mentions about the consolidation of amorphous powders and presents results of hot pressing and spark plasma sintering on one of the alloy systems. The final chapter summarizes the Dissertation and suggests some prospective research work that can be taken up in future. The Dissertation emphasizes the glass-forming ability, i.e., the ease with which amorphization can occur. In this work the milling time required for amorphization was the indicator/measure of GFA. Although the ultimate aim of this work was to consolidate the Fe-based amorphous alloy powders into bulk so as to undertake mechanical characterization, however, it was first necessary to study the glass forming aspect in the different alloy systems. By doing this a stage has been reached, where different options are available with respect to amorphous phase-forming compositions and the knowledge to improve glass-forming ability via the mechanical alloying technique. This will be ultimately useful in the powder compaction process into various shapes and sizes at optimum pressure and temperature. The study on mechanical crystallization indicates, or in a way defines, a limit to the process of amorphization, and it was also demonstrated that this phenomenon is more common in occurrence than and not as restricted as it was earlier reported to be.
Show less - Date Issued
- 2008
- Identifier
- CFE0002025, ucf:47630
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0002025
- Title
- Structure and Properties of Polymer-Derived SiBCN Ceramics.
- Creator
-
Chen, Yaohan, An, Linan, Fang, Jiyu, Xu, Chengying, Zhai, Lei, Huo, Qun, Gong, Xun, University of Central Florida
- Abstract / Description
-
Polymer-derived ceramics (PDCs) are a unique class of multifunctional materials synthesized by thermal decomposition of polymeric precursors. Due to their unique and excellent properties and flexible manufacturing capability, PDC is a promising technology to prepare ceramic fibers, coatings, composites and micro-sensors for high-temperature applications. However, the structure-property relationships of PDCs have not been well understood. The lack of such understandings drastically limited the...
Show morePolymer-derived ceramics (PDCs) are a unique class of multifunctional materials synthesized by thermal decomposition of polymeric precursors. Due to their unique and excellent properties and flexible manufacturing capability, PDC is a promising technology to prepare ceramic fibers, coatings, composites and micro-sensors for high-temperature applications. However, the structure-property relationships of PDCs have not been well understood. The lack of such understandings drastically limited the further developments and applications of the materials.In this dissertation, the structure and properties of amorphous polymer-derived silicon carbonitride (SiCN) and silicoboron carbonitride (SiBCN) have been studied. The SiCN was obtained using commercially available polysilazane as pre-ceramic precursor, and the SiBCN ceramics with varied Si-to-B ratio were obtained from polyborosilazanes, which were synthesized by the hydroboration and dehydrocoupling reaction of borane and polysilazane. The structural evolution of polymer-derived SiCN and SiBCN ceramics from polymer to ceramics was investigated by NMR, FTIR, Raman, EPR, TG/DTA, and XRD. The results show a phase-separation of amorphous matrix and a graphitization of (")free(") carbon phase, and suggest that the boron doping has a great influence on the structural evolution. The electric and dielectric properties of the SiCN and SiBCNs were studied by I-V curves, LCR Meter, and network analyzer. A new electronic conduction mechanism and structure model has been proposed to account for the relationships between the observed properties and microstructure of the materials. Furthermore, the SiBCN ceramics showed the improved dielectric properties at characterization temperature up to 1300 (&)#186;C, which allows the fabrication of ultrahigh-temperature wireless microsensors for extreme environments.
Show less - Date Issued
- 2012
- Identifier
- CFE0004195, ucf:49014
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0004195
