View All Items
(1 - 8 of 8)
- Title
- EFFECT OF SODIUM AND ABSORBER THICKNESS ON CIGS2 THIN FILM SOLAR CELLS.
- Creator
-
Vasekar, Parag, Dhere, Neelkanth, University of Central Florida
- Abstract / Description
-
Chalcopyrites are important contenders among solar cell technologies due to direct band gap and higher absorption coefficient. CuIn1-xGaxS2 (CIGS2) thin-film solar cells are of interest for space power applications because of near optimum bandgap of 1.5 eV for AM0 solar radiation outside the earth's atmosphere. The record efficiency of 11.99% has been achieved on a 2.7 µm CIGS2 thin film prepared by sulfurization at FSEC PV Materials Laboratory. Since CIGS2 films are typically grown...
Show moreChalcopyrites are important contenders among solar cell technologies due to direct band gap and higher absorption coefficient. CuIn1-xGaxS2 (CIGS2) thin-film solar cells are of interest for space power applications because of near optimum bandgap of 1.5 eV for AM0 solar radiation outside the earth's atmosphere. The record efficiency of 11.99% has been achieved on a 2.7 µm CIGS2 thin film prepared by sulfurization at FSEC PV Materials Laboratory. Since CIGS2 films are typically grown in copper-rich regime, excess cuprous sulfide which helps in the formation of CIGS2 is etched away. This makes CIGS2 nearly stoichiometric. However, it is difficult to adjust Cu/(In+Ga) ratio in the desired range 0.7 to 0.9. A solution to this is to grow CIGS2 in copper-deficient regime. However, it is difficult to produce device quality films without the support of cuprous sulfide. This work is one of the very few attempts in which device quality films were formed even in copper-deficient regimes with the addition of sodium. Also, recent research endeavors in the CIGS2 thin film photovoltaic community are directed towards thinner films because the availability and cost of indium as well as gallium are limiting factors. The required amounts of rare and expensive metals can be lowered by using thinner films. The solar cell performance in the thinner absorbers deteriorates due to the detrimental effects of the larger fraction of grain boundaries. It is essential to hasten the grain growth through coalescence to retain high efficiency in devices prepared using thinner films. Large grain size that is desirable for obtaining high efficiency cells can be achieved by creating conditions of fewer nucleation sites and large mobilities of the deposited species. Sodium has been found to play a vital role by enhancing the atomic mobility and improving the coalescence even in thinner films. This work presents a study of morphology and device properties of CIGS2 thin films with Copper-deficient absorbers after minute amounts of sodium are introduced on the Mo-coated substrate in the form of sodium fluoride layer prior to sputter deposition of copper-gallium alloy and indium. Photovoltaic conversion efficiency of 9.15% was obtained for copper-deficient absorbers. In a parallel set of experiments, copper-rich precursors were used to produce absorbers of lower thickness range values and the parameters were optimized. Photovoltaic conversion efficiency of 10.12% was obtained for an absorber of thickness 1.5 µm and an efficiency of 9.62% was obtained for an absorber of thickness 1.2 µm.
Show less - Date Issued
- 2009
- Identifier
- CFE0002525, ucf:47671
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0002525
- Title
- OPTIMIZATION OF PROCESS PARAMETERS FOR REDUCED THICKNESS CIGSES THIN FILM SOLAR CELLS.
- Creator
-
Pethe, Shirish, Dhere, Neelkanth, University of Central Florida
- Abstract / Description
-
With the advent of the 21st century, one of the serious problems facing mankind is harmful effects of global warming. Add to that the ever increasing cost of fuel and the importance of development of clean energy resources as alternative to fossil fuel has becomes one of the prime and pressing challenges for modern science and technology in the 21st century. Recent studies have shown that energy related sources account for 50% of the total emission of carbon dioxide in the atmosphere. All...
Show moreWith the advent of the 21st century, one of the serious problems facing mankind is harmful effects of global warming. Add to that the ever increasing cost of fuel and the importance of development of clean energy resources as alternative to fossil fuel has becomes one of the prime and pressing challenges for modern science and technology in the 21st century. Recent studies have shown that energy related sources account for 50% of the total emission of carbon dioxide in the atmosphere. All research activities are focused on developing various technologies that are capable of converting sunlight into electricity with high efficiency and can be produced using a cost-effective process. One of such technologies is the CuIn1-xGaxSe2 (CIGS) and its alloys that can be produced using cost-effective techniques and also exhibit high photo-conversion efficiency. The work presented here discusses some of the fundamental issues related to high volume production of CIGS thin film solar cells. Three principal issues that have been addressed in this work are effect of reduction in absorber thickness on device performance, micrononuniformity involved with amount of sodium and its effect on device performance and lastly the effect of working distance on the properties of molybdenum back contact. An effort has been made to understand the effect of absorber thickness on PV parameters and optimize the process parameters accordingly. Very thin (<1 µm) absorber film were prepared by selenization using metallorganic selenium source in a conventional furnace and by RTP using Se vapor. Sulfurization was carried out using H2S gas. Devices with efficiencies reaching 9% were prepared for very thin (<1 µm) CIGS and CIGSeS thin films. It was shown through this work that the absorber thickness reduction of 64% results in the efficiency drop of only 32%. With further optimization of the reaction process of the absorber layer as well as the other layers higher efficiencies can be achieved. The effect of sodium on the device performance is experimentally verified in this work. To the best of our knowledge the detrimental effect of excess sodium has been verified by experimental data and effort has been made to correlate the variation in PV parameter to theoretical models of effect of sodium. It has been a regular practice to deposit thin barrier layer prior to molybdenum deposition to reduce the micrononuniformities caused due to nonuniform out diffusion of sodium from the soda lime glass. However, it was proven in this work that an optimally thick barrier layer is necessary to reduce the out diffusion of sodium to negligible quantities and thus reduce the micrononuniformities. Molybdenum back contact deposition is a bottleneck in high volume manufacturing due to the current state of art where multi layer molybdenum film needs to be deposited to achieve the required properties. In order to understand and solve this problem experiments were carried out. The effect of working distance (distance between the target and the substrate) on film properties was studied and is presented in this work. During the course of this work efforts were taken to carry out a systematic and detailed study of some of the fundamental issues related to CIGS technology and particular for high volume manufacturing of CIGS PV modules and lay a good foundation for further improvement of PV performance of CIGS thin film solar cells prepared by the two step process of selenization and sulfurization of sputtered metallic precursors.
Show less - Date Issued
- 2010
- Identifier
- CFE0003517, ucf:48940
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0003517
- Title
- SOLAR DRIVEN PHOTOELECTROCHEMICAL WATER SPLITTING FOR HYDROGEN GENERATION USING MULTIPLE BANDGAP TANDEM OF CIGS2 PV CELLS AND THIN FILM PHOTOCATALYST.
- Creator
-
Jahagirdar, Anant, Dhere, Neelkanth, University of Central Florida
- Abstract / Description
-
The main objective of this research was to develop efficient CuIn1-xGaxS2 (CIGS2)/CdS thin film solar cells for photoelectrochemical (PEC) water splitting to produce very pure hydrogen and oxygen. Efficiencies obtained using CIGS2 have been lower than those achieved using CuInSe2 and CuIn1-xGaxSe2. The basic limitation in the efficiencies is attributed to lower open circuit voltages with respect to the bandgap of the material. Presently, the main mechanism used to increase the open circuit...
Show moreThe main objective of this research was to develop efficient CuIn1-xGaxS2 (CIGS2)/CdS thin film solar cells for photoelectrochemical (PEC) water splitting to produce very pure hydrogen and oxygen. Efficiencies obtained using CIGS2 have been lower than those achieved using CuInSe2 and CuIn1-xGaxSe2. The basic limitation in the efficiencies is attributed to lower open circuit voltages with respect to the bandgap of the material. Presently, the main mechanism used to increase the open circuit voltage of these copper chalcopyrites (CuInSe2 and CuInS2) is the addition of gallium. However, addition of gallium has its own challenges. This research was intended to (i) elucidate the advantages and disadvantages of gallium addition, (ii) provide an alternative technique to the photovoltaic (PV) community to increase the open circuit voltage which is independent of gallium additions, (iii) develop highly efficient CIGS2/CdS thin film solar cells and (iv) provide an alternative material in the form of CIGS2/CdS thin film solar cells and an advanced technology in the form of a multiple bandgap tandem for PEC water splitting. High gallium content was achieved by the incorporation of a highly excess copper composition. Attempts to achieve high gallium content produced reasonable but not the best solar cell performance. Few solar cells developed on a molybdenum back contact and an ITO/MoS2 transparent conducting back contact showed a PV conversion efficiency of 7.93% and 5.97%, respectively. The solar cells developed on the ITO/MoS2 back contact form the first generation CIGS2/CdS thin film solar cells and 5.97% is the first ever reported efficiency on an ITO/MoS2 transparent back contact. Reasons for the moderate performance of these solar cells were attributed to significant porosity and remnants of unsulfurized CuGa alloy in the bulk of CIGS2. This was the first attempt to a detailed study of materials and device characteristics of CIGS2/CdS thin film solar cells prepared starting with a highly excess copper content CIGS2 layer. Next, excess copper composition of 1.4 (equivalent to gallium content, x = 0.3) was chosen with the aim to achieve the best efficiency. The open circuit voltage was enhanced by depositing an intermediate layer of intrinsic ZnO between CdS and ZnO:Al layers. The systematic study of requirements for such a layer and further optimization of its thickness to achieve a higher open circuit voltage (which is the greatest challenge of the scientific community) forms an important scientific contribution of this research. The PV parameters for CIGS2/CdS thin film solar cell as measured officially at the National Renewable Energy Laboratory were: open circuit voltage of 830.5 mV, short circuit current density of 21.88 mA/cm2, fill factor of 69.13% and photovoltaic conversion efficiency of 11.99% which sets a new world record for CIGS2 cells developed using sulfurization and the open circuit voltage of 830.5 mV has become the "Voc champion value". New PEC setups with the RuS2 and Ru0.99Fe0.01S2 photoanodes were developed. RuS2 and Ru0.99Fe0.01S2 photoanodes were more stable in the electrolyte and showed better I-V characteristics than the RuO2 anode earlier used. Using two CIGS2/CdS thin film solar cells, a PEC efficiency of 8.78% was achieved with a RuS2 anode and a platinum cathode. Results of this research constitute a significant advance towards achieving practical feasibility and industrially viability of the technology of PEC hydrogen generation by water splitting.
Show less - Date Issued
- 2005
- Identifier
- CFE0000871, ucf:46666
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0000871
- Title
- PREPARATION OF EFFICIENT CUIN1-XGAXSE2-YSY/CDS THIN-FILM SOLAR CELLS BY OPTIMIZING THE MOLYBDENUM BACK CONTACT AND USING DIETHYLSELENIDE AS SELENIUM PRECURSOR.
- Creator
-
Kadam, Ankur, Dhere, Neelkanth, University of Central Florida
- Abstract / Description
-
High efficiency CuIn1-xGaxSe2-ySy (CIGSS)/CdS thin-film solar cells were prepared by optimizing the Mo back contact layer and optimizing the parameters for preparing CIGSS absorber layer using diethylselenide as selenium source. The Mo film was sputter deposited on 2.5 cm x 10 cm soda-lime glass using DC magnetron sputtering for studying the adhesion and chemical reactivity with selenium and sulfur containing gas at maximum film growth temperature. Mo being a refractory material develops...
Show moreHigh efficiency CuIn1-xGaxSe2-ySy (CIGSS)/CdS thin-film solar cells were prepared by optimizing the Mo back contact layer and optimizing the parameters for preparing CIGSS absorber layer using diethylselenide as selenium source. The Mo film was sputter deposited on 2.5 cm x 10 cm soda-lime glass using DC magnetron sputtering for studying the adhesion and chemical reactivity with selenium and sulfur containing gas at maximum film growth temperature. Mo being a refractory material develops stresses, nature of which depends on the deposition power and argon pressure. It was found that the deposition sequence with two tensile stressed layers deposited at 200W and 5 x 10-3 Torr argon pressure when sandwiched between three compressively stressed layers deposited at 300 W power and 0.3 x 10-3 Torr argon pressure had the best adhesion, limited reactivity and compact nature. An organo-metallic compound, diethylselenide (DESe) was developed as selenium precursor to prepare CIGSS absorber layers. Metallic precursors Cu-In-Ga layers were annealing in the conventional furnace in the temperature range of 475oC to 515 oC and in the presence of a dilute DESe atmosphere. The films were grown in an indium rich regime. Systematic approaches lead to the optimization of each step involved in the preparation of the absorber layer. Initial experiments were focused on obtaining the range of maximum temperatures required for the growth of the film. The following experiments included optimization of soaking time at maximum temperature, quantity of metallic precursor, and amount of sodium in terms of NaF layer thickness required for selenization. The absorber surface was coated with a 50 to 60 nm thick layer of CdS as hetero-junction partner by chemical bath deposition. A window bi-layer of i:ZnO/ZnO:Al was deposited by RF magnetron sputtering. The thickness of i:ZnO was increased to reduce the shunt resistance to improve open circuit voltage. The cells were completed by depositing a Cr/Ag front contact by thermal evaporation. Efficiencies greater than 13% was achieved on glass substrates. The performance of the cells was co-related with the material properties.
Show less - Date Issued
- 2006
- Identifier
- CFE0001035, ucf:46822
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0001035
- Title
- Optimization of Process Parameters for Faster Deposition of CuIn1-xGaxS2 and CuIn1-xGaxSe2-ySy Thin Film Solar Cells.
- Creator
-
Kaul, Ashwani, Dhere, Neelkanth, Heinrich, Helge, Kar, Aravinda, Chow, Lee, Sundaram, Kalpathy, University of Central Florida
- Abstract / Description
-
Thin film solar cells have the potential to be an important contributor to the world energy demand in the 21st century. Among all the thin film technologies, CuInGaSe2 (CIGS) thin film solar cells have achieved the highest efficiency. However, the high price of photovoltaic (PV) modules has been a major factor impeding their growth for terrestrial applications. Reduction in cost of PV modules can be realized by several ways including choosing scalable processes amenable to large area...
Show moreThin film solar cells have the potential to be an important contributor to the world energy demand in the 21st century. Among all the thin film technologies, CuInGaSe2 (CIGS) thin film solar cells have achieved the highest efficiency. However, the high price of photovoltaic (PV) modules has been a major factor impeding their growth for terrestrial applications. Reduction in cost of PV modules can be realized by several ways including choosing scalable processes amenable to large area deposition, reduction in the materials consumption of active layers, and attaining faster deposition rates suitable for in-line processing. Selenization-sulfurization of sputtered metallic Cu-In-Ga precursors is known to be more amenable to large area deposition. Sputter-deposited molybdenum thin film is commonly employed as a back contact layer for CIGS solar cells. However, there are several difficulties in fabricating an optimum back contact layer. It is known that molybdenum thin films deposited at higher sputtering power and lower gas pressure exhibit better electrical conductivity. However, such films exhibit poor adhesion to the soda-lime glass substrate. On the other hand, films deposited at lower discharge power and higher pressure although exhibit excellent adhesion show lower electrical conductivity. Therefore, a multilayer structure is normally used so as to get best from the two deposition regimes. A multi-pass processing is not desirable in high volume production because it prolongs total production time and correspondingly increases the manufacturing cost. In order to make manufacturing compliant with an in-line deposition, it is justifiable having fewer deposition sequences. Thorough analysis of pressure and power relationship of film properties deposited at various parameters has been carried out. It has been shown that it is possible to achieve a molybdenum back contact of desired properties in a single deposition pass by choosing the optimum deposition parameters. It is also shown that the film deposited in a single pass is actually a composite structure. CIGS solar cells have successfully been completed on the developed single layer back contact with National Renewable Energy Laboratory (NREL) certified device efficiencies (>)11%. The optimization of parameters has been carried out in such a way that the deposition of back contact and metallic precursors can be carried out in identical pressure conditions which is essential for in-line deposition without a need for load-lock. It is know that the presence of sodium plays a very critical role during the growth of CIGS absorber layer and is beneficial for the optimum device performance. The effect of sodium location during the growth of the absorber layer has been studied so as to optimize its quantity and location in order to get devices with improved performance. NREL certified devices with efficiencies (>)12% have been successfully completed.
Show less - Date Issued
- 2012
- Identifier
- CFE0004559, ucf:49261
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0004559
- Title
- CORRELATION BETWEEN PREPARATION PARAMETERS AND PROPERTIES OF MOLYBDENUM BACK CONTACT LAYER FOR CIGS THIN FILM SOLAR CELLS.
- Creator
-
Takahashi, Eigo, Dhere, Neelkanth, University of Central Florida
- Abstract / Description
-
Molybdenum (Mo) thin film back contact layers for thin film CuIn(1-x)GaxSe2 (CIGS) solar cells were deposited onto soda lime glass substrates using a direct current (DC) planar magnetron sputtering deposition technique. Requirements for the Mo thin film as a back contact layer for CIGS solar cells are various. Sheet resistance, contact resistance to the CIGS absorber, optical reflectance, surface morphology, and adhesion to the glass substrate are the most important properties that the Mo...
Show moreMolybdenum (Mo) thin film back contact layers for thin film CuIn(1-x)GaxSe2 (CIGS) solar cells were deposited onto soda lime glass substrates using a direct current (DC) planar magnetron sputtering deposition technique. Requirements for the Mo thin film as a back contact layer for CIGS solar cells are various. Sheet resistance, contact resistance to the CIGS absorber, optical reflectance, surface morphology, and adhesion to the glass substrate are the most important properties that the Mo thin film back contact layer must satisfy. Experiments were carried out under various combinations of sputtering power and working gas pressure, for it is well known that mechanical, morphological, optical, and electrical property of a sputter-deposited Mo thin film are dependent on these process parameters. Various properties of each Mo film were measured and discussed. Sheet resistances were measured using a four-point probe equipment and minimum value of 0.25 Ω/sq was obtained for the 0.6 µm-thick Mo film. Average surface roughnesses of each Mo film ranged from 15 to 26 Å were measured by Dektak profilometer which was also employed to measure film thicknesses. Resistivities were calculated from the sheet resistance and film thickness of each film. Minimum resistivity of 11.9 µΩ∙cm was obtained with the Mo thin film deposited at 0.1 mTorr and 250 W. A residual stress analysis was conducted with a bending beam technique with very thin glass strips, and maximum tensile stress of 358 MPa was obtained; however, films did not exhibit a compressive stress. Adhesive strengths were examined for all films with a ÂÂ"Scotch-tapeÂÂ" test, and all films showed a good adhesion to the glass substrate. Sputter-deposited Mo thin films are commonly employed as a back contact layer for CIGS and CuInSe2 (CIS)-based solar cells; however, there are several difficulties in fabricating a qualified back contact layer. Generally, Mo thin films deposited at higher sputtering power and lower working gas pressure tend to exhibit lower resistivity; however, such films have a poor adhesion to the glass substrate. On the other hand, films deposited at lower power and higher gas pressure tend to have a higher resistivity, whereas the films exhibit an excellent adhesion to the glass substrate. Therefore, it has been a practice to employ multi-layered Mo thin film back contact layers to achieve the properties of good adhesion to the glass substrate and low resistivity simultaneously. However, multi layer processes have a lower throughput and higher fabricating cost, and requires more elaborated equipment compared to single layer processes, which are not desirable from the industrial point of view. As can be seen, above mentioned process parameters and the corresponding Mo thin film properties are at the two extreme ends of the spectrum. Hence experiments were conducted to find out the mechanisms which influence the properties of Mo thin films by changing the two process parameters of working gas pressure and sputtering power individually. The relationships between process parameters and above mentioned properties were studied and explained. It was found that by selecting the process parameters properly, less resistive, appropriate-surfaced, and highly adhesive single layer Mo thin films for CIGS solar cells can be achieved.
Show less - Date Issued
- 2010
- Identifier
- CFE0003031, ucf:48353
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0003031
- Title
- ZINC CADMIUM SULPHIDE AND ZINC SULPHIDE AS ALTERNATIVE HETEROJUNCTION PARTNERS FOR CIGS2 SOLAR CELLS.
- Creator
-
Kumar, Bhaskar, Dhere, Neelkanth G, University of Central Florida
- Abstract / Description
-
Devices with ZnCdS/ZnS heterojunction partner layer have shown better blue photon response due to higher band gap of these compounds as compared to devices with CdS heterojunction partner layer. CdS heterojunction partner layer has shown high photovoltaic conversion efficiencies with CIGS absorber layer while efficiencies are lower with CuIn1-xGaxS2 (CIGS2). A negative conduction band offset has been observed for CdS/CIGS2 as compared to near flat conduction band alignment in case of CdS/CIGS...
Show moreDevices with ZnCdS/ZnS heterojunction partner layer have shown better blue photon response due to higher band gap of these compounds as compared to devices with CdS heterojunction partner layer. CdS heterojunction partner layer has shown high photovoltaic conversion efficiencies with CIGS absorber layer while efficiencies are lower with CuIn1-xGaxS2 (CIGS2). A negative conduction band offset has been observed for CdS/CIGS2 as compared to near flat conduction band alignment in case of CdS/CIGS devices, which results in higher interface dominated recombination. Moreover, it has been predicted that optimum band offsets for higher efficiency solar cells may be achieved for cells with alternative heterojunction partner such as ZnS. With varying ratio of Zn/ (Zn+Cd) in ZnxCd1-xS a range of bandgap energies can be obtained and thus an optimum band offset can be engineered. For reducing interface dominated recombination better lattice match between absorber and heterojunction partners is desirable. Although CdS has better lattice match with CuIn1-xGaxS2 absorber layer, same is not true for CuIn1-xGaxS2 absorber layers. Utilizing ZnxCd1-xS as heterojunction partner provides a range of lattice constant (between aZnS= ~5.4 Ǻ and aCdS= ~5.7 Ǻ) depending on Zn/(Zn+Cd). Therefore better lattice match can be obtained between heterojunction partner and absorber layer. Better lattice match will lead to lower interface dominated recombination, hence higher open circuit voltages. In the present study chemical bath deposition parameters are near optimized for high efficiency CIGS2 Solar cells. Effect of various chemical bath deposition parameters on device performance was studied and attempts were made to optimize the deposition parameters in order to improve the device performance.In/(In+Ga) ratio in absorber layer is varied to obtain good lattice match and optimum band alignment. Solar cells with conversion efficiencies comparable to conventional CdS/CIGS2 has been obtained with ZnxCd1-xS /CIGS2. High short current as well as higher open circuit voltages were obtained with ZnxCd1-xS as alternative heterojunction partner for CIGS2 solar cells as compared to SLG/Mo/CIGS2/ CdS / i-ZnO/ZnO:Al.
Show less - Date Issued
- 2007
- Identifier
- CFE0001936, ucf:47469
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0001936
- Title
- EFFECT OF COMPOSITION, MORPHOLOGY AND SEMICONDUCTING PROPERTIES ON THE EFFICIENCY OF CUIN1-XGAXSE2-YSY THIN-FILM SOLAR CELLS PREPARED BY RAPID THERMAL PROCESSING.
- Creator
-
Kulkarni, Sachin, Dhere, Neelkanth, University of Central Florida
- Abstract / Description
-
A rapid thermal processing (RTP) reactor for the preparation of graded CuIn1-xGaxSe2-ySy (CIGSeS) thin-film solar cells has been designed, assembled and is being used at the Photovoltaic Materials Laboratory of the Florida Solar Energy Center. CIGSeS films having the optimum composition, morphology, and semiconducting properties were prepared using RTP. Initially films having various Cu/(In+Ga) ratios were prepared. In the next step selenium incorporation in these films was optimized,...
Show moreA rapid thermal processing (RTP) reactor for the preparation of graded CuIn1-xGaxSe2-ySy (CIGSeS) thin-film solar cells has been designed, assembled and is being used at the Photovoltaic Materials Laboratory of the Florida Solar Energy Center. CIGSeS films having the optimum composition, morphology, and semiconducting properties were prepared using RTP. Initially films having various Cu/(In+Ga) ratios were prepared. In the next step selenium incorporation in these films was optimized, followed by sulfur incorporation in the surface to increase the bandgap at the surface. The compositional gradient of sulfur was fine-tuned so as to increase the conversion efficiency. Materials properties of these films were characterized by optical microscopy, SEM, AFM, EDS, XRD, GIXRD, AES, and EPMA. The completed cells were extensively studied by electrical characterization. Current-voltage (I-V), external and internal quantum efficiency (EQE and IQE), capacitance-voltage (C-V), and light beam induced current (LBIC) analysis were carried out. Current Density (J)-Voltage (V) curves were obtained at different temperatures. The temperature dependence of the open circuit voltage and fill factor has been estimated. The bandgap value calculated from the intercept of the linear extrapolation was ~1.1-1.2 eV. Capacitance-voltage analysis gave a carrier density of ~4.0 x 1015 cm-3. Semiconductor properties analysis of CuIn1-xGaxSe2-ySy (CIGSeS) thin-film solar cells has been carried out. The values of various PV parameters determined using this analysis were as follows: shunt resistance (Rp) of ~510 Ohms-cm2 under illumination and ~1300 Ohms-cm2 in dark, series resistance (Rs) of ~0.8 Ohms-cm2 under illumination and ~1.7 Ohms-cm2 in dark, diode quality factor (A) of 1.87, and reverse saturation current density (Jo) of 1.5 x 10-7A cm-2. The efficiency of 12.78% obtained during this research is the highest efficiency obtained by any University or National Lab for copper chalcopyrite solar cells prepared by RTP. CIGS2 cells have a better match to the solar spectrum due to their comparatively higher band-gap as compared to CIGS cells. However, they are presently limited to efficiencies below 13% which is considerably lower than that of CIGS cells of 19.9%. One of the reasons for this lower efficiency is the conduction band offset between the CIGS2 absorber layer and the CdS heterojunction partner layer. The band offset value between CIGS2 and CdS was estimated by a combination of ultraviolet photoelectron spectroscopy (UPS) and Inverse Photoemission Spectroscopy (IPES) to be -0.45 eV, i.e. a cliff is present between these two layers, enhancing the recombination at the junction, this limits the efficiency of CIGS2 wide-gap chalcopyrite solar cells.
Show less - Date Issued
- 2008
- Identifier
- CFE0002467, ucf:47728
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0002467
