Current Search:  Digital Image Correlation (x)

View All Items

  • CSV Spreadsheet
(1 - 3 of 3)
ANISOTROPY EVOLUTION DUE TO SURFACE TREATMENT ON 3D-PRINTED FUSED DEPOSITION MODELING (FDM) OF ACRYLONITRILE BUTADIENE STYRENE (ABS)
Title
ANISOTROPY EVOLUTION DUE TO SURFACE TREATMENT ON 3D-PRINTED FUSED DEPOSITION MODELING (FDM) OF ACRYLONITRILE BUTADIENE STYRENE (ABS).
Creator
Lozinski, Blake E, Kassab, Alain, University of Central Florida
Abstract / Description
Purpose: This paper will present insight to the methodology and results of the experimental characterization of Acrylonitrile Butadiene Styrene (ABS) using Fused Deposition Modeling (FDM). The work in this research explored the effects of print orientation, surface treatment, and ultraviolet (UV) light degradation with the utilization of Digital Image Correlation (DIC) on ABS tensile specimens. Design/methodology: ABS specimens were printed at three build orientations (flat (0 degrees), 45...
Show morePurpose: This paper will present insight to the methodology and results of the experimental characterization of Acrylonitrile Butadiene Styrene (ABS) using Fused Deposition Modeling (FDM). The work in this research explored the effects of print orientation, surface treatment, and ultraviolet (UV) light degradation with the utilization of Digital Image Correlation (DIC) on ABS tensile specimens. Design/methodology: ABS specimens were printed at three build orientations (flat (0 degrees), 45 degrees, and up-right (90 degrees)). Each of these specimens were treated with three different surface treatments including a control (acrylic paint, Cyanoacrylate, and Diglycidyl Bisphenol A) followed by exposure to UV light to the respective batches. This experiment design will provide tensile direction properties with the effect of thermoset coatings and UV degradation. Dogbone FDM specimens based on ASTM standard D638 type IV were printed on a Stratasys Dimension SST (Soluble Support Technology) 1200es 3D Printer and loaded into a MTS Landmark Servohydraulic Test Systems. Analysis was preformed on the fracture section of the tensile specimens utilized DIC and comparing Ultimate Tensile Strength (UTS) and Ultimate Fracture Strength (UFS). Findings: From the results UV light did not play a large factor in the strength of the specimens. The print orientation showed the largest anisotropic behavior where some specimens experienced as much as a 54% difference in ultimate tensile strength. Thermoset coated specimens experienced a maximum of 2% increase in strength for the Cyanoacrylate and Diglycidyl Bisphenol A specimens where the acrylic paint and natural did not. Several findings were of value when looking at the stress strain plots. Originality/value: This paper provides knowledge to the limited work on print build orientation, thermoset coatings and, UV light on ABS specimens. Very little to no work has been done on these three properties. This paper can serve as the foundation of future work on external applications on ABS plastics.
Show less
Date Issued
2017
Identifier
CFH2000269, ucf:45825
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFH2000269
The Mechanical Response and Parametric Optimization of Ankle-Foot Devices
Title
The Mechanical Response and Parametric Optimization of Ankle-Foot Devices.
Creator
Smith, Kevin, Gordon, Ali, Kassab, Alain, Bai, Yuanli, Pabian, Patrick, University of Central Florida
Abstract / Description
To improve the mobility of lower limb amputees, many modern prosthetic ankle-foot devices utilize a so called energy storing and return (ESAR) design. This allows for elastically stored energy to be returned to the gait cycle as forward propulsion. While ESAR type feet have been well accepted by the prosthetic community, the design and selection of a prosthetic device for a specific individual is often based on clinical feedback rather than engineering design. This is due to an incomplete...
Show moreTo improve the mobility of lower limb amputees, many modern prosthetic ankle-foot devices utilize a so called energy storing and return (ESAR) design. This allows for elastically stored energy to be returned to the gait cycle as forward propulsion. While ESAR type feet have been well accepted by the prosthetic community, the design and selection of a prosthetic device for a specific individual is often based on clinical feedback rather than engineering design. This is due to an incomplete understanding of the role of prosthetic design characteristics (e.g. stiffness, roll-over shape, etc.) have on the gait pattern of an individual. Therefore, the focus of this work has been to establish a better understanding of the design characteristics of existing prosthetic devices through mechanical testing and the development of a prototype prosthetic foot that has been numerically optimized for a specific gait pattern. The component stiffness, viscous properties, and energy return of commonly prescribed carbon fiber ESAR type feet were evaluated through compression testing with digital image correlation at select loading angles following the idealized gait from the ISO 22675 standard for fatigue testing. A representative model was developed to predict the stress within each of the tested components during loading and to optimize the design for a target loading response through parametric finite element analysis. This design optimization approach, along with rapid prototyping technologies, will allow clinicians to better identify the role the design characteristics of the foot have on an amputee's biomechanics during future gait analysis.
Show less
Date Issued
2016
Identifier
CFE0006397, ucf:51502
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0006397
Nanocomposite Coating Mechanics via Piezospectroscopy
Title
Nanocomposite Coating Mechanics via Piezospectroscopy.
Creator
Freihofer, Gregory, Raghavan, Seetha, Gou, Jihua, Bai, Yuanli, Schulzgen, Axel, University of Central Florida
Abstract / Description
Coatings utilizing the piezospectroscopic (PS) effect of alpha alumina could enable on the fly stress sensing for structural health monitoring applications. While the PS effect has been historically utilized in several applications, here by distributing the photo-luminescent material in nanoparticle form within a matrix, a stress sensing coating is created. Parallel to developing PS coatings for stress sensing, the multi-scale mechanics associated with the observed PS response of...
Show moreCoatings utilizing the piezospectroscopic (PS) effect of alpha alumina could enable on the fly stress sensing for structural health monitoring applications. While the PS effect has been historically utilized in several applications, here by distributing the photo-luminescent material in nanoparticle form within a matrix, a stress sensing coating is created. Parallel to developing PS coatings for stress sensing, the multi-scale mechanics associated with the observed PS response of nanocomposites and their coatings has been applied to give material property measurements, providing an understanding of particle reinforced composite behavior.Understanding the nanoparticle-coating-substrate mechanics is essential to interpreting the spectral shifts for stress sensing of structures. In the past, methods to experimentally measure the mechanics of these embedded nano inclusions have been limited, and much of the design of these composites depend on computational modeling and bulk response from mechanical testing. The PS properties of Chromium doped alumina allow for embedded inclusion mechanics to be revisited with unique experimental setups that probe the particles state of stress under applied load to the composite. These experimental investigations of particle mechanics will be compared to the Eshelby theory and its derivative theories in addition to the nanocomposite coating mechanics. This work discovers that simple nanoparticle load transfer theories are adequate for predicting PS properties in an intermediate volume fraction range. With fundamentals of PS nanocomposites established, the approach was applied to selected experiments to prove its validity. In general it was observed that the elastic modulus values calculated from the PS response were similar to that observed from macroscale strain measurements such as a strain gage. When simple damage models were applied to monitor the elastic modulus, it was observed that the rate of decay for the elastic modulus was much higher for the PS measurements than for the strain gage.A novel experiment including high resolution PS maps with secondary strain maps from digital image correlation is reviewed on an open hole tension, composite coupon. The two complementary measurements allow for a unique PS response for every location around the hole with a spatial resolution of 400 microns. Progression of intermediate damage mechanisms was observed before digital image correlation indicated them. Using the PS nanocomposite model, elastic modulus values were calculated. Introducing an elastic degradation model with some plastic deformation allows for estimation of material properties during the progression of failure.This work is part of a continuing effort to understand the mechanics of a stress sensing PS coating. The mechanics were then applied to various experimental data that provided elastic property calculations with high resolution. The significance is in the experimental capture of stress transfer in particulate composites. These findings pave the way for the development of high resolution stress-sensing coatings.
Show less
Date Issued
2014
Identifier
CFE0005614, ucf:50223
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0005614