Current Search:  Fused Deposition Modeling (x)

View All Items

  • CSV Spreadsheet
(1 - 2 of 2)
ANISOTROPY EVOLUTION DUE TO SURFACE TREATMENT ON 3D-PRINTED FUSED DEPOSITION MODELING (FDM) OF ACRYLONITRILE BUTADIENE STYRENE (ABS)
Title
ANISOTROPY EVOLUTION DUE TO SURFACE TREATMENT ON 3D-PRINTED FUSED DEPOSITION MODELING (FDM) OF ACRYLONITRILE BUTADIENE STYRENE (ABS).
Creator
Lozinski, Blake E, Kassab, Alain, University of Central Florida
Abstract / Description
Purpose: This paper will present insight to the methodology and results of the experimental characterization of Acrylonitrile Butadiene Styrene (ABS) using Fused Deposition Modeling (FDM). The work in this research explored the effects of print orientation, surface treatment, and ultraviolet (UV) light degradation with the utilization of Digital Image Correlation (DIC) on ABS tensile specimens. Design/methodology: ABS specimens were printed at three build orientations (flat (0 degrees), 45...
Show morePurpose: This paper will present insight to the methodology and results of the experimental characterization of Acrylonitrile Butadiene Styrene (ABS) using Fused Deposition Modeling (FDM). The work in this research explored the effects of print orientation, surface treatment, and ultraviolet (UV) light degradation with the utilization of Digital Image Correlation (DIC) on ABS tensile specimens. Design/methodology: ABS specimens were printed at three build orientations (flat (0 degrees), 45 degrees, and up-right (90 degrees)). Each of these specimens were treated with three different surface treatments including a control (acrylic paint, Cyanoacrylate, and Diglycidyl Bisphenol A) followed by exposure to UV light to the respective batches. This experiment design will provide tensile direction properties with the effect of thermoset coatings and UV degradation. Dogbone FDM specimens based on ASTM standard D638 type IV were printed on a Stratasys Dimension SST (Soluble Support Technology) 1200es 3D Printer and loaded into a MTS Landmark Servohydraulic Test Systems. Analysis was preformed on the fracture section of the tensile specimens utilized DIC and comparing Ultimate Tensile Strength (UTS) and Ultimate Fracture Strength (UFS). Findings: From the results UV light did not play a large factor in the strength of the specimens. The print orientation showed the largest anisotropic behavior where some specimens experienced as much as a 54% difference in ultimate tensile strength. Thermoset coated specimens experienced a maximum of 2% increase in strength for the Cyanoacrylate and Diglycidyl Bisphenol A specimens where the acrylic paint and natural did not. Several findings were of value when looking at the stress strain plots. Originality/value: This paper provides knowledge to the limited work on print build orientation, thermoset coatings and, UV light on ABS specimens. Very little to no work has been done on these three properties. This paper can serve as the foundation of future work on external applications on ABS plastics.
Show less
Date Issued
2017
Identifier
CFH2000269, ucf:45825
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFH2000269
Tensile-Compressive Asymmetry and Anisotropy of Fused Deposition Modeling PLA under Monotonic Conditions
Title
Tensile-Compressive Asymmetry and Anisotropy of Fused Deposition Modeling PLA under Monotonic Conditions.
Creator
Perkowski, Casey, Gordon, Ali, Kassab, Alain, Divo, Eduardo, University of Central Florida
Abstract / Description
Additive Manufacturing (AM) continues to gain popularity for its ability to produce complexly-shaped final use components that are impractical to manufacture by traditional methods; however, additive manufactured parts contain complex mesostructures that result in directionally-dependent mechanical properties that have yet to be fully characterized. This effort demonstrates a framework of experimental and analytical methods needed to characterize the uniaxial monotonic behavior of fused...
Show moreAdditive Manufacturing (AM) continues to gain popularity for its ability to produce complexly-shaped final use components that are impractical to manufacture by traditional methods; however, additive manufactured parts contain complex mesostructures that result in directionally-dependent mechanical properties that have yet to be fully characterized. This effort demonstrates a framework of experimental and analytical methods needed to characterize the uniaxial monotonic behavior of fused deposition modeling PLA using tensile and compressive experiments on specimens printed at various orientations. Based on experimental results, the asymmetry and anisotropy of the tensile and compressive response was analyzed for a candidate material. Specimens from different orientations underwent microscopy and failure surface analysis to correlate test data. The material was observed to exhibit tetragonal behavior with tensile-compressive asymmetry. The experimental and simulated results show a strong correlation. Based on the collection of results, analysis, and computations, this work demonstrates a practice that can be used to characterize similar materials for use in AM components.
Show less
Date Issued
2017
Identifier
CFE0006778, ucf:51847
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0006778