Current Search: buck converter (x)
View All Items
(1 - 5 of 5)
- Title
- STUDY OF INGAAS LDMOS FOR POWER CONVERSION APPLICATIONS.
- Creator
-
Liu, Yidong, Yuan, Jiann S., University of Central Florida
- Abstract / Description
-
In this work an n-channel In0.65Ga0.35As LDMOS with Al2O3 as gate dielectric is investigated. Instead of using traditional Si process for LDMOS, we suggest In0.65Ga0.35As as substitute material due to its higher electron mobility and its promising for power applications. The proposed 0.5-μm channel-length LDMOS cell is studied through device TCAD simulation tools. Due to different gate dielectric, comprehensive comparisons between In0.65Ga0.35As LDMOS and Si LDMOS are made in two ways,...
Show moreIn this work an n-channel In0.65Ga0.35As LDMOS with Al2O3 as gate dielectric is investigated. Instead of using traditional Si process for LDMOS, we suggest In0.65Ga0.35As as substitute material due to its higher electron mobility and its promising for power applications. The proposed 0.5-μm channel-length LDMOS cell is studied through device TCAD simulation tools. Due to different gate dielectric, comprehensive comparisons between In0.65Ga0.35As LDMOS and Si LDMOS are made in two ways, structure with the same cross-sectional dimension, and structure with different thickness of gate dielectric to achieve the same gate capacitance. The on-resistance of the new device shows a big improvement with no degradation on breakdown voltage over traditional device. Also it is indicated from these comparisons that the figure of merit(FOM) Ron·Qg of In0.65Ga0.35As LDMOS shows an average of 91.9% improvement to that of Si LDMOS. To further explore the benefit of using In0.65Ga0.35As LDMOS as switch in power applications, DC-DC buck converter is utilized to observe the performance of LDMOS in terms of power efficiency. The LDMOS performance is experimented with operation frequency of the circuit sweeping in the range from 100 KHz to 100 MHz. It turns out InGaAs LDMOS is good candidate for power applications.
Show less - Date Issued
- 2009
- Identifier
- CFE0002686, ucf:48217
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0002686
- Title
- CONVENTIONAL AND ZVT SYNCHRONOUS BUCK CONVERTER DESIGN, ANALYSIS, AND MEASUREMENT.
- Creator
-
Cory, Mark, Yuan, Jiann, University of Central Florida
- Abstract / Description
-
The role played by power converting circuits is extremely important to almost any electronic system built today. Circuits that use converters of any type depend on power that is consistent in form and reliable in order to properly function. In addition, todayÂÂ's demands require more efficient use of energy, from large stationary systems such as power plants all the way down to small mobile devices such as laptops and cell phones. This places a need to reduce any losses...
Show moreThe role played by power converting circuits is extremely important to almost any electronic system built today. Circuits that use converters of any type depend on power that is consistent in form and reliable in order to properly function. In addition, todayÂÂ's demands require more efficient use of energy, from large stationary systems such as power plants all the way down to small mobile devices such as laptops and cell phones. This places a need to reduce any losses to a minimum. The power conversion circuitry in a system is a very good place to reduce a large amount of unnecessary loss. This can be done using circuit topologies that are low loss in nature. For low loss and high performance, soft switching topologies have offered solutions in some cases. Also, limited study has been performed on device aging effects on switching mode power converting circuits. The impact of this effect on a converterÂÂ's overall efficiency is theoretically known but with little experimental evidence in support. In this thesis, non-isolated buck type switching converters will be the main focus. This type of power conversion is widely used in many systems for DC to DC voltage step down. Newer methods and topologies to raise converter power efficiency are discussed, including a new synchronous ZVT topology . Also, a study has been performed on device aging effects on converter efficiency. Various scenarios of voltage conversion, switching frequency, and circuit components as well as other conditions have been considered. Experimental testing has been performed in both cases, ZVTÂÂ's benefits and device aging effects, the results of which are discussed as well.
Show less - Date Issued
- 2010
- Identifier
- CFE0003106, ucf:48650
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0003106
- Title
- Analysis, Design and Efficiency Optimization of Power Converters for Renewable Energy Applications.
- Creator
-
Chen, Xi, Batarseh, Issa, Zhou, Qun, Mikhael, Wasfy, Sun, Wei, Kutkut, Nasser, University of Central Florida
- Abstract / Description
-
DC-DC power converters are widely used in renewable energy-based power generation systems due to the constant demand of high-power density and high-power conversion efficiency. DC-DC converters can be classified into non-isolated and isolated topologies. For non-isolated topologies, they are typically derived from buck, boost, buck-boost or forth order (such as Cuk, Sepic and Zeta) converters and they usually have relatively higher conversion efficiency than isolated topologies. However, with...
Show moreDC-DC power converters are widely used in renewable energy-based power generation systems due to the constant demand of high-power density and high-power conversion efficiency. DC-DC converters can be classified into non-isolated and isolated topologies. For non-isolated topologies, they are typically derived from buck, boost, buck-boost or forth order (such as Cuk, Sepic and Zeta) converters and they usually have relatively higher conversion efficiency than isolated topologies. However, with the applications where the isolation is required, either these topologies should be modified, or alternative topologies are needed. Among various isolated DC-DC converters, the LLC resonant converter is an attractive selection due to its soft switching, isolation, wide gain range, high reliability, high power density and high conversion efficiency.In low power applications, such as battery chargers and solar microinverters, increasing the switching frequency can reduce the size of passive components and reduce the current ripple and root-mean-square (RMS) current, resulting in higher power density and lower conduction loss. However, switching losses, gate driving loss and electromagnetic interference (EMI) may increase as a consequence of higher switching frequency. Therefore, switching frequency modulation, components optimization and soft switching techniques have been proposed to overcome these issues and achieve a tradeoff to reach the maximum conversion efficiency.This dissertation can be divided into two categories: the first part is focusing on the well-known non-isolated bidirectional cascaded-buck-boost converter, and the second part is concentrating on the isolated dual-input single resonant tank LLC converter. Several optimization approaches have been presented to improve the efficiency, power density and reliability of the power converters. In the first part, an adaptive switching frequency modulation technique has been proposed based on the precise loss model in this dissertation to increase the efficiency of the cascaded-buck-boost converter. In adaptive switching frequency modulation technique, the optimal switching frequency for the cascaded-buck-boost converter is adaptively selected to achieve the minimum total power loss. In addition, due to the major power losses coming from the inductor, a new low profile nanocrystalline inductor filled with copper foil has been designed to significantly reduce the core loss and winding loss. To further improve the efficiency of the cascaded-buck-boost converter, the adaptive switching frequency modulation technique has been applied on the converter with designed nanocrystalline inductor, in which the peak efficiency of the converter can break the 99% bottleneck.In the second part, a novel dual-input DC-DC converter is developed according to the LLC resonant topology. This design concept minimizes the circuit components by allowing single resonant tank to interface with multiple input sources. Based on different applications, the circuit configuration for the dual-input LLC converter will be a little different. In order to improve the efficiency of the dual-input LLC converter, the semi-active rectifiers have been used on the transformer secondary side to replace the low-side bridge diodes. In this case, higher magnetizing inductance can be selected while maintaining the same voltage gain. Besides, a burst-mode control strategy has been proposed to improve the light load and very light load efficiency of the dual- input LLC converter. This control strategy is able to be readily implemented on any power converter since it can be achieved directly through firmware and no circuit modification is needed in implementation of this strategy.
Show less - Date Issued
- 2019
- Identifier
- CFE0007612, ucf:52531
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0007612
- Title
- Ultra-Efficient Cascaded Buck-Boost Converter.
- Creator
-
Ashok Pise, Anirudh, Batarseh, Issa, Mikhael, Wasfy, Sun, Wei, Kutkut, Nasser, University of Central Florida
- Abstract / Description
-
This thesis presents various techniques to achieve ultra-high-efficiency for Cascaded-Buck-Boost converter. A rigorous loss model with component non linearity is developed and validated experimentally. An adaptive-switching-frequency control is discussed to optimize weighted efficiency. Some soft-switching techniques are discussed. A low-profile planar-nanocrystalline inductor is developed and various design aspects of core and copper design are discussed. Finite-element-method is used to...
Show moreThis thesis presents various techniques to achieve ultra-high-efficiency for Cascaded-Buck-Boost converter. A rigorous loss model with component non linearity is developed and validated experimentally. An adaptive-switching-frequency control is discussed to optimize weighted efficiency. Some soft-switching techniques are discussed. A low-profile planar-nanocrystalline inductor is developed and various design aspects of core and copper design are discussed. Finite-element-method is used to examine and visualize the inductor design. By implementing the above, a peak efficiency of over 99.2 % is achieved with a power density of 6 kW/L and a maximum profile height of 7 mm is reported. This converter finds many applications because of its versatility: allowing bidirectional power flow and the ability to step-up or step-down voltages in either direction.
Show less - Date Issued
- 2017
- Identifier
- CFE0007277, ucf:52181
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0007277
- Title
- CONTROL STRATEGY FOR MAXIMIZING POWER CONVERSION EFFICIENCY AND EFFECTIVENESS OF THREE PORT SOLAR CHARGING STATION FOR ELECTRIC VEHICLES.
- Creator
-
Hamilton, Christopher, Batarseh, Issa, University of Central Florida
- Abstract / Description
-
Recent trends in the energy sector have provided opportunities in the research of alternative energy sources and optimization of systems that harness these energy sources. With the rising cost of fossil fuel and rising concern about detrimental effects that fossil fuel consumption has on the environment, electric vehicles are becoming more prevalent. A study put out in 2009 gives a prediction that in the year 2025, 20% of new vehicles will be PHEVs. As energy providers become more concerned...
Show moreRecent trends in the energy sector have provided opportunities in the research of alternative energy sources and optimization of systems that harness these energy sources. With the rising cost of fossil fuel and rising concern about detrimental effects that fossil fuel consumption has on the environment, electric vehicles are becoming more prevalent. A study put out in 2009 gives a prediction that in the year 2025, 20% of new vehicles will be PHEVs. As energy providers become more concerned about a growing population and diminishing energy source, they are looking into alternative energy sources such as wind and solar power. Much of this is done on a large scale with vast amounts of land used for solar or wind farms to provide energy to the grid. However, as population grows, requirements of the physical components of a power transmission system will become more demanding and the need for remote micro-grids will become more prevalent. Micro-grids are essentially smaller subsystems of a distribution system that provide power to a confined group of loads, or households. Using the idea of micro grid technology, a solar charging station can be used as a source to provide energy for the immediate surroundings, or also to electric vehicles that are demanding energy from the panels. Solar charging stations are becoming very popular, however the need for improvement and optimization of these systems is needed. This thesis will present a method for redesigning the overall architecture of the controls and power electronics of typical carports so that efficiency, reliability and modularity are achieved. Specifically, a typical carport, as seen commonly today, has been built on the University of Central Florida campus in Orlando. This carport was designed in such a way that shifting from conventional charging methods is made easy while preserving the fundamental requirements of a practical solar carport.
Show less - Date Issued
- 2010
- Identifier
- CFE0003490, ucf:48954
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0003490
