Current Search:  critical heat flux (x)

View All Items

  • CSV Spreadsheet
(1 - 2 of 2)
EXPERIMENTAL STUDIES OF THE HEAT TRANSFER CHARACTERISTICS OF SILICA NANOPARTICLE WATER-BASED DISPERSION IN POOL BOILING USING NICHROME FLAT RIBBONS AND WIRES
Title
EXPERIMENTAL STUDIES OF THE HEAT TRANSFER CHARACTERISTICS OF SILICA NANOPARTICLE WATER-BASED DISPERSION IN POOL BOILING USING NICHROME FLAT RIBBONS AND WIRES.
Creator
Vazquez, Diane, Kumar, Ranganathan, University of Central Florida
Abstract / Description
This work deals with a study of enhanced critical heat flux (CHF) and burnout heat flux (BHF) in pool boiling of water with suspended silica nanoparticles using ribbon-type and wire heaters. Previously our group and other researchers have reported three-digit percentage increase in critical heat flux in silica nanofluids. This study investigates the effect of various heater surface dimensions and cross-sectional shapes on pool boiling heat transfer characteristics of water and water-based...
Show moreThis work deals with a study of enhanced critical heat flux (CHF) and burnout heat flux (BHF) in pool boiling of water with suspended silica nanoparticles using ribbon-type and wire heaters. Previously our group and other researchers have reported three-digit percentage increase in critical heat flux in silica nanofluids. This study investigates the effect of various heater surface dimensions and cross-sectional shapes on pool boiling heat transfer characteristics of water and water-based nanofluids. CHF and BHF were analyzed for circular and rectangular cross-section nichrome wires and ribbons of increasing sizes in the range of 0.32mm to 2.38mm width, approaching a flat-plate scenario. Experimental trends showed that the CHF and BHF in water pool boiling decrease as heater surface area increases, and for similar surface area, the wire had a 25% higher CHF than that of the ribbon. For concentrations from 0.1vol% to 2vol%, various properties such as viscosity, pH, and surface tension as well as silica deposition on surface and glowing length of ribbon were measured in order to study the possible factors in the heat transfer behavior of nanofluids. The deposition of the particles on the wire allows high heat transfer through inter-agglomerate pores, resulting in a nearly 3-fold increase in burnout heat flux at very low concentrations. Results have shown a maximum of up to 340% CHF enhancement for ribbon-type heaters, and the relationship of CHF with respect to nanoparticle concentration has been found to be non-monotonic with a peak around 0.2vol% to 0.4vol%. Visualization of boiling experiments aided with determination of relative bubble sizes, nucleation, and flow regimes. The surface morphology of the heater was investigated using SEM and EDS analyses, and it was inferred that the 2vol% concentration deposition coating had higher porosity and rate of deposition compared with 0.2vol% case.
Show less
Date Issued
2010
Identifier
CFE0003141, ucf:48635
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0003141
THE EFFECT OF COLLOIDAL STABILITY ON THE HEAT TRANSFER CHARACTERISTICS OF NANOSILICA DISPERSED FLUIDS
Title
THE EFFECT OF COLLOIDAL STABILITY ON THE HEAT TRANSFER CHARACTERISTICS OF NANOSILICA DISPERSED FLUIDS.
Creator
Venkataraman, Manoj, Kumar, Ranganathan, University of Central Florida
Abstract / Description
Addition of nano particles to cooling fluids has shown marked improvement in the heat transfer capabilities. Nanofluids, liquids that contain dispersed nanoparticles, are an emerging class of fluids that have great potential in many applications. There is a need to understand the fundamental behavior of nano dispersed particles with respect to their agglomeration characteristics and how it relates to the heat transfer capability. Such an understanding is important for the development and...
Show moreAddition of nano particles to cooling fluids has shown marked improvement in the heat transfer capabilities. Nanofluids, liquids that contain dispersed nanoparticles, are an emerging class of fluids that have great potential in many applications. There is a need to understand the fundamental behavior of nano dispersed particles with respect to their agglomeration characteristics and how it relates to the heat transfer capability. Such an understanding is important for the development and commercialization of nanofluids. In this work, the stability of nano particles was studied by measuring the zeta potential of colloidal particles, particle concentration and size. Two different sizes of silica nano particles, 10 nm and 20 nm are used in this investigation at 0.2 vol. % and 0.5 vol. % concentrations. The measurements were made in deionized (DI) water, buffer solutions at various pH, DI water plus HCl acid solution (acidic pH) and DI water plus NaOH solution (basic pH). The stability or instability of silica dispersions in these solutions was related to the zeta potential of colloidal particles and confirmed by particle sizing measurements and independently by TEM observations. Low zeta potentials resulted in agglomeration as expected and the measured particle size was greater. The heat transfer characteristics of stable or unstable silica dispersions using the above solutions were experimentally determined by measuring heat flux as a function of temperature differential between a nichrome wire and the surrounding fluid. These experiments allowed the determination of the critical heat flux (CHF), which was then related to the dispersion characteristics of the nanosilica in various fluids described above. The thickness of the diffuse layer on nano particles was computed and experimentally confirmed in selected conditions for which there was no agglomeration. As the thickness of the diffuse layer decreased due to the increase in salt content or the ionic content, the electrostatic force of repulsion cease to exist and Van der Waal's force of agglomeration prevailed causing the particles to agglomerate affecting the CHF. The 10nm size silica particle dispersions showed better heat transfer characteristics compared to 20nm dispersion. It was also observed that at low zeta potential values, where agglomeration prevailed in the dispersion, the silica nano particles had a tendency to deposit on the nickel chromium wire used in CHF experiments. The thickness of the deposition was measured and the results show that with a very high deposition, CHF is enhanced due to the porosity on the wire. The 10nm size silica particles show higher CHF compared to 20nm silica particles. In addition, for both 10nm and 20nm silica particles, 0.5 vol. % concentration yielded higher heat transfer compared to 0.2 vol. % concentration. It is believed that although CHF is significantly increased with nano silica containing fluids compared to pure fluids, formation of particle clusters in unstable slurries will lead to detrimental long time performance, compared to that with stable silica dispersions.
Show less
Date Issued
2005
Identifier
CFE0000837, ucf:46676
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0000837