Current Search:  gate oxide (x)

View All Items

  • CSV Spreadsheet
(1 - 4 of 4)
Transient Safe Operating Area (TSOA) for ESD applications
Title
Transient Safe Operating Area (TSOA) for ESD applications.
Creator
Malobabic, Slavica, Liou, Juin, Shen, Zheng, Yuan, Jiann-Shiun, Vinson, James, University of Central Florida
Abstract / Description
A methodology to obtain design guidelines for gate oxide input pin protection and high voltage output pin protection in Electrostatic Discharge (ESD) time frame is developed through measurements and Technology Computer Aided Design (TCAD).A set of parameters based on transient measurements are used to define Transient Safe Operating Area (TSOA). The parameters are then used to assess effectiveness of protection devices for output and input pins.The methodology for input pins includes...
Show moreA methodology to obtain design guidelines for gate oxide input pin protection and high voltage output pin protection in Electrostatic Discharge (ESD) time frame is developed through measurements and Technology Computer Aided Design (TCAD).A set of parameters based on transient measurements are used to define Transient Safe Operating Area (TSOA). The parameters are then used to assess effectiveness of protection devices for output and input pins.The methodology for input pins includes establishing ESD design targets under Charged Device Model (CDM) type stress in low voltage MOS inputs.The methodology for output pins includes defining ESD design targets under Human Metal Model (HMM) type stress in high voltage Laterally Diffused MOS (LDMOS) outputs. First, the assessment of standalone LDMOS robustness is performed, followed by establishment of protection design guidelines. Secondly, standalone clamp HMM robustness is evaluated and a prediction methodology for HMM type stress is developed based on standardized testing. Finally, LDMOS and protection clamp parallel protection conditions are identified.
Show less
Date Issued
2012
Identifier
CFE0004405, ucf:49363
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0004405
CLASS-E CASCODE POWER AMPLIFIER ANALYSIS AND DESIGN FOR LONG TERM RELIABILITY
Title
CLASS-E CASCODE POWER AMPLIFIER ANALYSIS AND DESIGN FOR LONG TERM RELIABILITY.
Creator
Kutty, Karan, Yuan, Jiann-Shiun, University of Central Florida
Abstract / Description
This study investigated the Class-E power amplifier operating at 5.2 GHz. Since the operation of this amplifier applies a lot of stress on the switching transistor, a cascode topology was applied in order to reduce the drain-source voltage stress. Such an amplifier was designed and optimized in order to improve stability, power added efficiency, and matching. A layout for the said design was then created to be fabrication-ready using the TSMC 0.18 um technology. Post-layout simulations were...
Show moreThis study investigated the Class-E power amplifier operating at 5.2 GHz. Since the operation of this amplifier applies a lot of stress on the switching transistor, a cascode topology was applied in order to reduce the drain-source voltage stress. Such an amplifier was designed and optimized in order to improve stability, power added efficiency, and matching. A layout for the said design was then created to be fabrication-ready using the TSMC 0.18 um technology. Post-layout simulations were performed in order to realize a more realistic circuit performance with the layout design in mind. Long-term stress effects, such as oxide breakdown, on the key transistors were modeled and simulated in order to achieve an understanding of how leakage currents affect the overall circuit performance. Simulated results were compared and contrasted against theoretical understanding using derived equations. Recommendations for future advancements were made for modification and optimization of the circuit by the application of other stress reduction strategies, variation in the class-E topology, and improvement of the driver stage.
Show less
Date Issued
2010
Identifier
CFE0003360, ucf:48477
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0003360
STUDY OF GATE OXIDE BREAKDOWN AND HOT ELECTRON EFFECT ON CMOS CIRCUIT PERFORMANCES
Title
STUDY OF GATE OXIDE BREAKDOWN AND HOT ELECTRON EFFECT ON CMOS CIRCUIT PERFORMANCES.
Creator
MA, JUN, Yuan, Jiann S., University of Central Florida
Abstract / Description
In the modern semiconductor world, there is a significant scaling of the transistor dimensions –The transistor gate length and the gate oxide thickness drop down to only several nanometers. Today the semiconductor industry is already dominated by submicron devices and other material devices for the high transistor density and performance enhancement. In this case, the semiconductor reliability issues are the most important thing for commercialization. The major reliability issues caused...
Show moreIn the modern semiconductor world, there is a significant scaling of the transistor dimensions –The transistor gate length and the gate oxide thickness drop down to only several nanometers. Today the semiconductor industry is already dominated by submicron devices and other material devices for the high transistor density and performance enhancement. In this case, the semiconductor reliability issues are the most important thing for commercialization. The major reliability issues caused by voltage are hot carrier effects (HCs) and gate oxide breakdown (BD) effects. These issues are recently more important to industry, due to the small size and high lateral field in short-channel of the device will cause high electrical field and other reliability issues. This dissertation primarily focuses on the study of the CMOS device gate oxide breakdown effect on different kinds of circuits performance, also some HC effects on circuit's performance are studied. The physical mechanisms for BD have been presented. A practical and accurate equivalent breakdown circuit model for the CMOS device was studied to simulate the RF performance degradation on the circuit level. The BD location effect has been evaluated. Furthermore, a methodology was developed to predict the BD effects on the circuit's performances with different kinds of BD location. It also provides guidance for the reliability considerations of the digital, analog, and RF circuit design. The BD effects on digital circuits SRAM, analog circuits Sample&Hold, and RF building blocks with the nanoscale device – low noise amplifier, LC oscillator, mixer, and power amplifier, have been investigated systematically. Finally 90 nm device will be used to study the HC effect on the circuit's performance. The contributions of this dissertation include: Providing a thorough study of the gate oxide breakdown issues caused by the voltage stress on the device – from device level to circuit level; Studying real voltage stress case – high frequency (950 MHz) dynamic stress, and comparing with the traditional DC stress; A simple, practical, and analytical method is derived to study the gate oxide breakdown effect including breakdown location effect and soft / hard breakdown on the digital, analog and RF circuits performances. A brief introduction and simulation for 90 nm device HC effect provide some useful information and helpful data for the industry. The gate oxide breakdown effect is the most common device reliability issue. The successful results of this dissertation, from device level to circuit level, provide an insight on how the BD affects the circuit's performance, and also provide some useful data for the circuit designers in their future work.
Show less
Date Issued
2009
Identifier
CFE0002856, ucf:48073
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0002856
RF Circuit Designs for Reliability and Process Variability Resilience
Title
RF Circuit Designs for Reliability and Process Variability Resilience.
Creator
Kritchanchai, Ekavut, Yuan, Jiann-Shiun, Sundaram, Kalpathy, Wei, Lei, Lin, Mingjie, Chow, Lee, University of Central Florida
Abstract / Description
Complementary metal oxide semiconductor (CMOS) radio frequency (RF) circuit design has been an ever-lasting research field. It has gained so much attention since RF circuits offer high mobility and wide-band efficiency, while CMOS technology provides the advantage of low cost and high integration capability. At the same time, CMOS device size continues to scale to the nanometer regime. Reliability issues with RF circuits have become more challenging than ever before. Reliability mechanisms,...
Show moreComplementary metal oxide semiconductor (CMOS) radio frequency (RF) circuit design has been an ever-lasting research field. It has gained so much attention since RF circuits offer high mobility and wide-band efficiency, while CMOS technology provides the advantage of low cost and high integration capability. At the same time, CMOS device size continues to scale to the nanometer regime. Reliability issues with RF circuits have become more challenging than ever before. Reliability mechanisms, such as gate oxide breakdown, hot carrier injection, negative bias temperature instability, have been amplified as the device size shrinks. In addition, process variability becomes a new design paradigm in modern RF circuits.In this Ph.D. work, a class F power amplifier (PA) was designed and analyzed using TSMC 180nm process technology. Its pre-layout and post-layout performances were compared. Post-layout parasitic effect decreases the output power and power-added efficiency. Physical insight of hot electron impact ionization and device self-heating was examined using the mixed-mode device and circuit simulation to mimic the circuit operating environment. Hot electron effect increases the threshold voltage and decreases the electron mobility of an n-channel transistor, which in turn decreases the output power and power-added efficiency of the power amplifier, as evidenced by the RF circuit simulation results. The device self-heating also reduces the output power and power-added efficiency of the PA. The process, voltage, and temperature (PVT) effects on a class AB power amplifier were studied. A PVT compensation technique using a current-source as an on-chip sensor was developed. The adaptive body bias design with the current sensing technique makes the output power and power-added efficiency much less sensitive to process variability, supply voltage variation, and temperature fluctuation, predicted by our derived analytical equations which are also verified by Agilent Advanced Design System (ADS) circuit simulation.Process variations and hot electron reliability on the mixer performance were also evaluated using different process corner models. The conversion gain and noise figure were modeled using analytical equations, supported by ADS circuit simulation results. A process invariant current source circuit was developed to eliminate process variation effect on circuit performance. Our conversion gain, noise figure, and output power show robust performance against PVT variations compared to those of a traditional design without using the current sensor, as evidenced by Monte Carlo statistical simulation.Finally, semiconductor process variations and hot electron reliability on the LC-voltage controlled oscillator (VCO) performance was evaluated using different process models. In our newly designed VCO, the phase noise and power consumptions are resilient against process variation effect due to the use of on-chip current sensing and compensation. Our Monte-Carlo simulation and analysis demonstrate that the standard deviation of phase noise in the new VCO design reduces about five times than that of the conventional design.
Show less
Date Issued
2016
Identifier
CFE0006131, ucf:51182
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0006131