Current Search: heat exchanger (x)
View All Items
(1 - 4 of 4)
- Title
- Investigation of Heat Transfer Enhancement Within a Concentric Annulus.
- Creator
-
Hanhold, Alexander, Kapat, Jayanta, Ahmed, Kareem, Vasu Sumathi, Subith, University of Central Florida
- Abstract / Description
-
Effective heat exchange is key for many energy applications including heat exchangers, heat extraction from heat source, and heat rejection to ambient thermal sink. This study focuses on the investigation for a specific heat exchange configuration, namely heat removal within a concentric annular passage using helical turbulators and jet impingement. Numerical testing was used to see how the different geometric parameters affect the heat transfer and pressure drop within the annulus by using...
Show moreEffective heat exchange is key for many energy applications including heat exchangers, heat extraction from heat source, and heat rejection to ambient thermal sink. This study focuses on the investigation for a specific heat exchange configuration, namely heat removal within a concentric annular passage using helical turbulators and jet impingement. Numerical testing was used to see how the different geometric parameters affect the heat transfer and pressure drop within the annulus by using helicoil turbulators. A vast range of designs were studied by changing the turbulator shape, pitch, and blockage ratio while maintaining a constant Reynolds number of 25,000. CFD was performed in STARCCM+ using the realizable ?-? turbulence model. Results show that turbulence and heat transfer increase with a higher blockage ratio and smaller pitch but the pressure drop is subsequently increased as well. The square turbulator promoted higher heat transfer compared to the circle turbulator but the pressure drop was significantly increased when the helix angle was greater than 20(&)deg; and blockage ratio greater than 0.48.Experimental and numerical efforts were used to find the heat transfer due to impingement jets on the target surface. Multiple flows as a function of jet Reynolds number ranging from 16,000-33,000 were tested for two geometries. Temperature Sensitive Paint (TSP) was utilized to observe local heat transfer. It was observed that jet degradation occurs after the 6th row of stream-wise impingement jets for both cases experimentally and it was difficult to numerically capture the effect of the cross flow from previous jets but managed to follow the same trend. The numerical results showed that they can be used with good agreement to predict the surface averaged Nusselt number to be within the 12% uncertainty found from experimental efforts. Geometry B was determined to perform better in terms of heat transfer as opposed to Geometry A with the same pressure loss.
Show less - Date Issued
- 2017
- Identifier
- CFE0007286, ucf:52155
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0007286
- Title
- Design and modeling of a heat exchanger for porous combustor powered steam generators in automotive industry.
- Creator
-
Dasgupta, Apratim, Orlovskaya, Nina, Gou, Jihua, Vasu Sumathi, Subith, University of Central Florida
- Abstract / Description
-
A major challenge faced by automobile manufacturers is to achieve reduction of particulate emission to acceptable standards, as the emission standards become more and more stringent. One of the ecologically friendly options to reduce emissions is to develop external combustion in a steam engine as a replacement of the internal combustion engine. There are multiple factors, other than pollution that need to be considered for developing a substitute for Internal Combustion Engine, like specific...
Show moreA major challenge faced by automobile manufacturers is to achieve reduction of particulate emission to acceptable standards, as the emission standards become more and more stringent. One of the ecologically friendly options to reduce emissions is to develop external combustion in a steam engine as a replacement of the internal combustion engine. There are multiple factors, other than pollution that need to be considered for developing a substitute for Internal Combustion Engine, like specific power, throttle response, torque speed curve, fuel consumption and refueling infrastructure. External combustion in a steam engine seems to be a bright idea, for a cleaner and more environment friendly alternative to the IC engine that can satisfy the multiple technology requirements mentioned. One way of performing external heterogeneous combustion is to use porous ceramic media, which is a modern and innovative technique, used in many practical applications. The heterogeneous combustion inside ceramic porous media provides numerous advantages, as the ceramic, acts as a regenerator that distributes heat from the flue gases to the upstream reactants, resulting in the extended flammability limits of the reactants. The heat exchanger design is the major challenge in developing an external combustion engine because of the space, such systems consume in an automobile. The goal of the research is to develop a compact and efficient heat exchanger for the application. The proposed research uses natural gas as a fuel that is mixed with air for combustion and the generated flue gases are fed to a heat exchanger to generate superheated system for performing engine work to the vehicle. The performed research is focused on designing and modeling of the boiler heat exchanger section. The justification for selection of working fluid and power plant technology is presented as part of the research, where the proposed system consists of an Air and Flue Gas Path and a Water and Steam Path. Models are developed for coupled thermal and fluid analysis of a heat exchanger, consisting of three sections. The first section converts water to a saturated liquid. The second portion consists of a section where water is converted to saturated steam. The third section is the superheater, where saturated steam is converted to superheated steam. The Finite Element Model is appropriately meshed and boundary conditions set up to solve the mass, momentum and energy conservation equations. The k-epsilon model is implemented to take care of turbulence. Analytical calculations following the established codes and standards are also executed to develop the design.
Show less - Date Issued
- 2017
- Identifier
- CFE0006579, ucf:51308
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0006579
- Title
- INTERACTION BETWEEN SECONDARY FLOW AND FILM COOLING JETS OF A REALISTIC ANNULAR AIRFOIL CASCADE (HIGH MACH NUMBER).
- Creator
-
Nguyen, Cuong, Kapat, Jayanta, University of Central Florida
- Abstract / Description
-
Film cooling is investigated on a flat plate both numerically and experimentally. Conical shaped film hole are investigated extensively and contribute to the current literature data, which is extremely rare in the open public domain. Both configuration of the cylindrical film holes, with and without a trench, are investigated in detail. Design of experiment technique was performed to find an optimum combination of both geometrical and fluid parameters to achieve the best film cooling...
Show moreFilm cooling is investigated on a flat plate both numerically and experimentally. Conical shaped film hole are investigated extensively and contribute to the current literature data, which is extremely rare in the open public domain. Both configuration of the cylindrical film holes, with and without a trench, are investigated in detail. Design of experiment technique was performed to find an optimum combination of both geometrical and fluid parameters to achieve the best film cooling performance. From this part of the study, it shows that film cooling performance can be enhanced up to 250% with the trenched film cooling versus non-trenched case provided the same amount of coolant. Since most of the relevant open literature is about film cooling on flat plate endwall cascade with linear extrusion airfoil, the purpose of the second part of this study is to examine the interaction of the secondary flow inside a 3D cascade and the injected film cooling jets. This is employed on the first stage of the aircraft gas turbine engine to protect the curvilinear (annular) endwall platform. The current study investigates the interaction between injected film jets and the secondary flow both experimentally and numerically at high Mach number (M=0.7). Validation shows good agreement between obtained data with the open literature. In general, it can be concluded that with an appropriate film coolant to mainstream blowing ratio, one can not only achieve the best film cooling effectiveness (FCE or η) on the downstream endwall but also maintain almost the same aerodynamic loss as in the un-cooled baseline case. Film performance acts nonlinearly with respect to blowing ratios as with film cooling on flat plate, in the other hand, with a right blowing ratio, film cooling performance is not affect much by secondary flow. In turn, film cooling jets do not increase pressure loss at the downstream wake area of the blades.
Show less - Date Issued
- 2010
- Identifier
- CFE0003546, ucf:48944
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0003546
- Title
- SPRAY COOLING FOR LAND, SEA, AIR AND SPACE BASED APPLICATIONS,A FLUID MANAGEMENT SYSTEM FOR MULTIPLE NOZZLE SPRAY COOLING AND A GUIDE TO HIGH HEAT FLUX HEATER DESIGN.
- Creator
-
Glassman, Brian, Chow, Louis, University of Central Florida
- Abstract / Description
-
This thesis is divided into four distinct chapters all linked by the topic of spray cooling. Chapter one gives a detailed categorization of future and current spray cooling applications, and reviews the major advantages and disadvantages that spray cooling has over other high heat flux cooling techniques. Chapter two outlines the developmental goals of spray cooling, which are to increase the output of a current system and to enable new technologies to be technically feasible. Furthermore,...
Show moreThis thesis is divided into four distinct chapters all linked by the topic of spray cooling. Chapter one gives a detailed categorization of future and current spray cooling applications, and reviews the major advantages and disadvantages that spray cooling has over other high heat flux cooling techniques. Chapter two outlines the developmental goals of spray cooling, which are to increase the output of a current system and to enable new technologies to be technically feasible. Furthermore, this chapter outlines in detail the impact that land, air, sea, and space environments have on the cooling system and what technologies could be enabled in each environment with the aid of spray cooling. In particular, the heat exchanger, condenser and radiator are analyzed in their corresponding environments. Chapter three presents an experimental investigation of a fluid management system for a large area multiple nozzle spray cooler. A fluid management or suction system was used to control the liquid film layer thickness needed for effective heat transfer. An array of sixteen pressure atomized spray nozzles along with an imbedded fluid suction system was constructed. Two surfaces were spray tested one being a clear grooved Plexiglas plate used for visualization and the other being a bottom heated grooved 4.5 x 4.5 cm2 copper plate used to determine the heat flux. The suction system utilized an array of thin copper tubes to extract excess liquid from the cooled surface. Pure water was ejected from two spray nozzle configurations at flow rates of 0.7 L/min to 1 L/min per nozzle. It was found that the fluid management system provided fluid removal efficiencies of 98% with a 4-nozzle array, and 90% with the full 16-nozzle array for the downward spraying orientation. The corresponding heat fluxes for the 16 nozzle configuration were found with and without the aid of the fluid management system. It was found that the fluid management system increased heat fluxes on the average of 30 W/cm2 at similar values of superheat. Unfortunately, the effectiveness of this array at removing heat at full levels of suction is approximately 50% & 40% of a single nozzle at respective 10„aC & 15„aC values of superheat. The heat transfer data more closely resembled convective pooling boiling. Thus, it was concluded that the poor heat transfer was due to flooding occurring which made the heat transfer mechanism mainly forced convective boiling and not spray cooling. Finally, Chapter four gives a detailed guide for the design and construction of a high heat flux heater for experimental uses where accurate measurements of surface temperatures and heat fluxes are extremely important. The heater designs presented allow for different testing applications; however, an emphasis is placed on heaters designed for use with spray cooling.
Show less - Date Issued
- 2005
- Identifier
- CFE0000473, ucf:46351
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0000473
