View All Items

Title: Advanced liquid crystal displays with supreme image qualities.
Creator: Chen, Haiwei, Wu, Shintson, Moharam, Jim, Likamwa, Patrick, Dong, Yajie, University of Central Florida
Abstract / Description: Several metrics are commonly used to evaluate the performance of display devices. In this dissertation, we analyze three key parameters: fast response time, wide color gamut, and high contrast ratio, which affect the final perceived image quality. Firstly, we investigate how response time affects the motion blur, and then discover the 2-ms rule. With advanced low-viscosity materials, new operation modes, and backlight modulation technique, liquid crystal displays (LCDs) with an unnoticeable...
Show moreSeveral metrics are commonly used to evaluate the performance of display devices. In this dissertation, we analyze three key parameters: fast response time, wide color gamut, and high contrast ratio, which affect the final perceived image quality. Firstly, we investigate how response time affects the motion blur, and then discover the 2-ms rule. With advanced low-viscosity materials, new operation modes, and backlight modulation technique, liquid crystal displays (LCDs) with an unnoticeable image blur can be realized. Its performance is comparable to an impulse-type display, like cathode ray tube (CRT). Next, we propose two novel backlight configurations to improve an LCD's color gamut. One is to use a functional reflective polarizer (FRP), acting as a notch filter to block the unwanted light, and the other is to combine FRP with a patterned half-wave plate to suppress the crosstalk between blue and green/red lights. In experiment, we achieved 97.3% Rec. 2020 in CIE 1976 color space, which is approaching the color gamut of a laser projector. Finally, to enhance an LCD's contrast ratio, we proposed a novel device configuration by adding an in-cell polarizer between LC layer and color filter array. The CR for a vertically-aligned LCD is improved from 5000:1 to 20,000:1, and the CR for a fringe field switching LCD is improved from 2000:1 to over 3000:1. To further enlarge CR to fulfill the high dynamic range requirement, a dual-panel LCD system is proposed and the measured contrast ratio exceeds 1,000,000:1. Overall speaking, such an innovated LCD exhibits supreme image qualities with motion picture response time comparable to CRT, vivid color to laser projector, and contrast ratio to OLED. Along with other outstanding features, like high peak brightness, high resolution density, long lifetime, and low cost, LCD would continue to maintain its dominance in consumer electronics in the foreseeable future.
Show less
Date Issued: 2017
Identifier: CFE0006864, ucf:51758
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0006864

Title: FAST-RESPONSE LIQUID CRYSTAL DISPLAYS.
Creator: jiao, meizi, Wu, Shin-Tson, University of Central Florida
Abstract / Description: After about five decades of extensive material research and device development, followed by massive investment in manufacturing technology, thin-film-transistor liquid-crystal-display (TFT-LCD) has finally become the dominant flat panel display technology. Nowadays, LCD performances, such as viewing angle, contrast ratio, and resolution, have reached acceptable levels. The remaining major technical challenges are response time, light efficiency, and sunlight readability. Fast response time is...
Show moreAfter about five decades of extensive material research and device development, followed by massive investment in manufacturing technology, thin-film-transistor liquid-crystal-display (TFT-LCD) has finally become the dominant flat panel display technology. Nowadays, LCD performances, such as viewing angle, contrast ratio, and resolution, have reached acceptable levels. The remaining major technical challenges are response time, light efficiency, and sunlight readability. Fast response time is desired to reduce motion blur and to enable field sequential color displays using red (R), green (G), and blue (B) LEDs (light emitting diodes) without noticeable color breakup. Sequential RGB colors would eliminate the commonly used spatial color filters which in turn enhances light efficiency and resolution density by ~ 3X. In this dissertation, several new approaches for achieving fast-response LCDs are explored. From material viewpoint, the most straightforward approach for achieving fast response time is to employ a thin cell gap with high birefringence and low viscosity liquid crystal (LC). We investigated the thin cell approach theoretically and experimentally. Voltage shielding effect and anchoring energy effect of alignment layers are found to play important roles on operating voltage and response time. Simulations are carried out to understand the underlying physics and confirm the experimental results quantitatively. Another approach to realize fast response time is to explore novel device configuration. Here, we proposed a dual fringing-field switching (DFFS) mode in which small LC domains are formed following the distribution of fringing fields. Therefore, it exhibits submillisecond response time without using thin cell or overdrive/undershoot voltage method. The response time of the DFFS mode is ~20X faster than a conventional vertical aligned LCD. In addition, high optical efficiency is achieved from the complementary top and bottom active LC domains. Two transmissive and one transflective LCDs using DFFS mode are conceived and their electro-optical properties investigated. A shortcoming of DFFS LCDs is their fabrication complexity. To keep the advantages of this fast-response mode while avoiding the requirement of double-TFTs and pixel registration, we modified the device structure to transflective LCD which uses a single TFT in each pixel and vertical aligned positive dielectric anisotropy LC. Two types of electrodes are considered: fringing-field switching (FFS) and in-plane switching (IPS). Besides fast response time and high transmittance, such a transflective LCD shows good sunlight readability. As nematic LC is gradually approaching to its limit in term of response time, polymer-stabilized blue phase (PSBP) LCD is emerging. It has potential to become next-generation display because of following revolutionary features: submillisecond response time, no need for alignment layer, good dark state and symmetric viewing angle, and cell gap insensitivity if IPS electrode is employed. In this dissertation, we studied the material-property correlation of Kerr effect-induced birefringence in nano-structured PSBP LC composites. Furthermore, a new device configuration of BP LCD with corrugated electrodes is proposed to solve two critical technical issues: high driving voltage and relatively low transmittance. The on-state voltage can be reduced from ~35 Vrms to ~10 Vrms which will enable TFT addressing, and the transmittance is improved from ~65% to ~85%. This new device configuration will accelerate the emergence of PSBP LCD. Wide view is another important requirement for a high-end display. Several new LCD configurations with negative A-plate and biaxial plate as phase compensation films are proposed to achieve wide view and broadband operation. The underlying working principles are studied and detailed display performances are included in this dissertation.
Show less
Date Issued: 2010
Identifier: CFE0003435, ucf:48399
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0003435

Title: Advanced Blue Phase Liquid Crystal Displays.
Creator: Xu, Daming, Wu, Shintson, Moharam, Jim, Likamwa, Patrick, Fang, Jiyu, University of Central Florida
Abstract / Description: Thin-film transistor (TFT) liquid crystal displays (LCDs) have become indispensable in our daily lives. Their widespread applications range from smartphones, laptops, TVs to navigational devices, data projectors and wearable displays. Over past decades, massive efforts have been invested in device development, material characterization and manufacturing technology. As a result, the performance of LCDs, such as viewing angle, contrast ratio, color gamut and resolution, have been improved...
Show moreThin-film transistor (TFT) liquid crystal displays (LCDs) have become indispensable in our daily lives. Their widespread applications range from smartphones, laptops, TVs to navigational devices, data projectors and wearable displays. Over past decades, massive efforts have been invested in device development, material characterization and manufacturing technology. As a result, the performance of LCDs, such as viewing angle, contrast ratio, color gamut and resolution, have been improved significantly. Nonetheless, there are still urgent needs for fast response time and low power consumption. Fast response time helps reduce motion image blurs and enable color sequential displays. The latter is particularly attractive since it eliminates spatial color filters, which in turn triples optical efficiency and resolution density. The power consumption can be reduced greatly by using color sequential displays, but liquid crystals with submillisecond response time are required to minimize color breakup. The state-of-the-art gray-to-gray response time of nematic LCDs is about 5ms, which is too slow to meet this requirement.With the urgent needs for submillisecond response time, polymer-stabilized blue phase liquid crystal is emerging as a strong candidate for achieving this goal. Compared to conventional nematic LCDs, blue phase LCDs exhibit several revolutionary features: submillisecond gray-to-gray response time, no need for alignment layer, optically isotropic voltage-off state, and large cell gap tolerance. However, some bottlenecks such as high operation voltage, low optical transmittance, noticeable hysteresis and slow TFT charging remain to be overcome before their widespread applications can be realized. This dissertation is dedicated to addressing these challenges from material development and device design viewpoints.First, we started to investigate the device physics of blue phase LCDs. We have built a numerical model based on the refraction effect for simulating the electro-optics of blue phase devices. The model well agrees with experimental data. Based on this model, we explored approaches from device and material viewpoints to achieve low operation voltage. On the device side, with protrusion and etched electrodes, we can reduce the operating voltage to below 10V and enhance the transmittance to over 80%. On the material side, high Kerr constant is indeed helpful for lowering the operation voltage, but we also need to pay attention to the individual ?n and ?? values of liquid crystal host according to the device structures employed. High-?? LC hosts help enhance Kerr constant, leading to a reduced operation voltage; but they may be subject to serious capacitance charging issues due to the huge dielectric anisotropy. Our model provides important guidelines for future device design and material development.To further enhance transmittance and reduce voltage, we have proposed a Z-shaped electrode structure. By optimizing the device structure, we have successfully reduced the operating voltage to ~8V and enhanced optical transmittance to (>) 95% based on a lower-?? LC host not subjecting to charging issues, showing comparable or even better performance than the mainstream LCDs. This is the first approach to achieve such a high transmittance in blue phase devices without using a directional backlight. By using zigzag structure, the color shift and gray inversion are in unnoticeable range.In addition, hysteresis affects the accuracy of grayscale control and should be suppressed. We have proposed a double exponential model to analyze the electric field effects of blue phase, and found that electrostriction effect is the root cause for hysteresis under strong electric field. To suppress the electrostriction effect in blue phase, a method to stabilize the blue phase lattice via linear photo-polymerization is demonstrated for the first time. By illuminating the mono-functional and the di-functional monomers with a linearly polarized UV beam, we can form anisotropic polymer networks, which in turn lead to anisotropic electrostrictions. In experiments, we found that when the polarization of UV light is perpendicular to the stripe electrodes, the electrostriction effect can be strongly suppressed. The resulting hysteresis is reduced from 6.95% to 0.36% and response time is improved by a factor of two. We foresee this approach will guide future manufacturing process.The approaches and studies presented in this dissertation are expected to advance the blue phase LCDs to a new level and accelerate their emergence as next-generation display technology. It is foreseeable that the widespread application of blue phase LCDs is around the corner.
Show less
Date Issued: 2016
Identifier: CFE0006200, ucf:51101
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0006200

Title: Low Voltage Blue Phase Liquid Crystal Displays.
Creator: Rao, Linghui, Wu, Shintson, Vanstryland, Eric, Zeldovich, Boris, Wu, Xinzhang, University of Central Florida
Abstract / Description: From cell phones, laptops, desktops, TVs, to projectors, high reliability LCDs have become indispensable in our daily life. Tremendous progress in liquid crystal displays (LCDs) has been made after decades of extensive research and development in materials, device configurations and manufacturing technology. Nowadays, the most critical issue on viewing angle has been solved using multidomain structures and optical film compensation. Slow response time has been improved to 2-5 ms with low...
Show moreFrom cell phones, laptops, desktops, TVs, to projectors, high reliability LCDs have become indispensable in our daily life. Tremendous progress in liquid crystal displays (LCDs) has been made after decades of extensive research and development in materials, device configurations and manufacturing technology. Nowadays, the most critical issue on viewing angle has been solved using multidomain structures and optical film compensation. Slow response time has been improved to 2-5 ms with low viscosity LC material, overdrive and undershoot voltage, and thin cell gap approach. Moving image blur has been significantly reduced by impulse driving and frame insertion. Contrast ratio in excess of one million-to-1 has been achieved through local dimming of the segmented LED backlight. The color gamut would exceed 100% of the NTSC (National Television System Committee), if RGB LEDs are used. Besides these technological advances, the cost has been reduced dramatically by investing in advanced manufacturing technologies. Polymer-stabilized blue phase liquid crystal displays (BPLCDs) based on Kerr effect is emerging as a potential next-generation display technology. In comparison to conventional nematic devices, the polymer-stabilized BPLCDs exhibit following attractive features: (1) submillisecond response time, (2) no need for molecular alignment layers, (3) optically isotropic dark state when sandwiched between crossed polarizers, and (4) transmittance is insensitive to cell gap when the in-plane electrodes are employed. However, aside from these great potentials, there are still some tough technical issues remain to be addressed. The major challenges are: 1) the operating voltage is still too high (~50 Volts vs. 5 Volts for conventional nematic LCDs), and the transmittance is relatively low (~65% vs. 85% for nematic LCDs), 2) the hysteresis effect and residual birefringence effect are still noticeable, 3) the mesogenic temperature range is still not wide enough for practical applications (?40 oC to 80 oC), and 4) the ionic impurities in these polymer-stabilized nano-structured LC composites could degrade the voltage holding ratio, which causes image sticking.In this dissertation, the BPLC materials are studied and the new BPLC device structures are designed to optimize display performances. From material aspect, the electro-optical properties of blue phase liquid crystals are studied based on Kerr effect. Temperature effects on polymer-stabilized blue phase or optically isotropic liquid crystal displays are investigated through the measurement of voltage dependent transmittance under different temperatures. The physical models for the temperature dependency of Kerr constant, induced birefringence and response time in BPLCs are first proposed and experimentally validated. In addition, we have demonstrated a polymer-stabilized BPLC mixture with a large Kerr constant K~13.7 nm/V2 at 20 oC at 633 nm. These models would set useful guidelines for optimizing material performances. From devices side, the basic operation principle of blue phase LCD is introduced. A numerical model is developed to simulate the electro-optic properties of blue phase LCDs based on in-plane-switching (IPS) structure. Detailed electrode dimension effect, distribution of induced birefringence, cell gap effect, correlation between operation voltage and Kerr constant, and wavelength dispersion are investigated. Viewing angle is another important parameter. We have optimized the device configurations according to the device physics studied. With proper new device designs, the operating voltage is decreased dramatically from around 50 Volts to below 10 Volts with a reasonably high transmittance (~70%) which enables the BPLCDs to be addressed by amorphous silicon thin-film transistors (TFTs). Moreover, weak wavelength dispersion, samll color shift, and low hysteresis BPLCDs are achieved after their root causes being unveiled. Optimization of device configurations plays a critical role to the widespread applications of BPLCDs.In addition to displays, blue phase liquid crystals can also be used for photonic applications, such as light modulator, phase grating, adaptive lens and photonic crystals. We will introduce the application of blue phase liquid crystal as a modulator to realize a viewing angle controllable display. The viewing angle can be tuned continuously and precisely with a fast response time. The detailed design and performance are also presented in this dissertation.
Show less
Date Issued: 2012
Identifier: CFE0004625, ucf:49930
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0004625

Title: High Performance Liquid Crystals for Displays and Spatial Light Modulators.
Creator: Peng, Fenglin, Wu, Shintson, Moharam, Jim, Zeldovich, Boris, Fang, Jiyu, University of Central Florida
Abstract / Description: Liquid crystals (LCs) are an amazing class of soft materials which have been widely used in the visible, infrared (IR), millimeter wave, and terahertz spectral regions. Both amplitude modulation (e.g. displays) and phase modulation (e.g. spatial light modulators (SLMs) for adaptive optics and adaptive lens) have been investigated extensively. Thin-film-transistor liquid crystal displays (TFT-LCDs) have become ubiquitous in our daily lives. Its widespread applications span from TVs, monitors,...
Show moreLiquid crystals (LCs) are an amazing class of soft materials which have been widely used in the visible, infrared (IR), millimeter wave, and terahertz spectral regions. Both amplitude modulation (e.g. displays) and phase modulation (e.g. spatial light modulators (SLMs) for adaptive optics and adaptive lens) have been investigated extensively. Thin-film-transistor liquid crystal displays (TFT-LCDs) have become ubiquitous in our daily lives. Its widespread applications span from TVs, monitors, tablets, smartphones, augmented reality, virtual reality, to vehicle displays. LCD shows advantages in 1) high resolution, 2) long lifetime, 3) vivid colors using quantum dots backlight, and 4) high dynamic contrast ratio employing local dimming technology. However, LCD exhibits a serious problem, which is slow response time. Therefore, it is commonly perceived that LCD exhibits a more severe image blur than organic light emitting diode (OLED) displays. Indeed, the response time of LCD is ~100x slower than that of OLED. To evaluate image blurs, Motion Picture Response Time (MPRT) has been proposed to quantify the visual performance of a moving object. MPRT is jointly governed by three factors: the sample and hold effect of an active matrix display, motion pursuing, and human vision system. It is a complicated problem and is difficult to obtain analytical solution. In this thesis, we analyze the sample-and-hold effects and derive a simple equation to correlate MPRT with LC response time, TFT frame rate, and duty ratio. From our analytical equation, we find that as long as an LCD's response time is less than 2 ms, its MPRT would be comparable to that of OLED at the same frame rate, even if the OLED's response time is assumed to be zero. To further reduce MPRT, we could boost the frame rate to 144 Hz or reduce the duty ratio through backlight modulation. This discovery sheds new physical insights for LCDs to achieve CRT-like displays with negligible image blurs. In addition to displays, LCs are widely employed in SLMs for modulating the phase and polarization of an incident light. This is because LCs possess high birefringence and relatively low absorption from the visible, IR, to terahertz regions. The useful applications include adaptive lens, adaptive optics, fiber-optic communication, antenna, and phase shifter. Fast response time is a common requirement for the abovementioned photonic devices. To achieve fast response time while maintaining 2-pi phase change, polymer-stabilized blue phase liquid crystal (BPLC) and polymer-network liquid crystal (PNLC) are promising candidates for the visible and IR SLMs, respectively. However, the operation voltage of present BPLC and PNLC devices is too high. To reduce operation voltage while keeping fast response time, we developed a new device configuration for BPLC SLM to work in the visible region. The new device structure allows the incident laser beam to traverse the BPLC layer four times before exiting the reflective SLM. As a result, the 2-pi phase change voltage is reduced to below 24V, which is the maximum attainable voltage for a high resolution liquid-crystal-on-silicon device. On the other hand, PNLC is a better candidate for the IR SLM because several high birefringence LC materials can be used. To reduce the operation voltage of a PNLC, we have investigated following three approaches: 1) developing large dielectric anisotropy and high birefringence (?n) LC materials, 2) optimizing polymer concentration, and 3) optimizing UV curing conditions. In the visible and near IR regions, most LCs are highly transparent. However, to extend the electro-optic application of LCs into MWIR and LWIR, absorption loss becomes a critical issue. In the MWIR region, several fundamental molecular vibration bands and overtones exist, which contribute to high absorption loss. The absorbed light turns to heat and then alters the birefringence locally, which in turns causes spatially non-uniform phase modulation. To suppress the optical loss, we have taken following approaches: (1) Designing high birefringence to minimize the LC layer thickness; (2) Shifting the absorption bands outside the spectral region of interest by deuteration, fluorination, or chlorination; (3) Reducing the overtone absorption by using a short alkyl chain. As a result, we have developed several low loss and high birefringence chlorinated LCs for the first time. To achieve fast response time, we demonstrated a PNLC with 2-pi phase change at MWIR and response time less than 5 ms. Molecular tailoring strategies for extending liquid crystal SLM into long-wavelength infrared (LWIR) are also explored.
Show less
Date Issued: 2017
Identifier: CFE0006636, ucf:51230
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0006636

Title: High Efficiency and Wide Color Gamut Liquid Crystal Displays.
Creator: Luo, Zhenyue, Wu, Shintson, Kik, Pieter, Schoenfeld, Winston, Fang, Jiyu, University of Central Florida
Abstract / Description: Liquid crystal display (LCD) has become ubiquitous and indispensable in our daily life. Recently, it faces strong competition from organic light emitting diode (OLED). In order to maintain a strong leader position, LCD camp has an urgent need to enrich the color performance and reduce the power consumption. This dissertation focuses on solving these two emerging and important challenges. In the first part of the dissertation we investigate the quantum dot (QD) technology to improve the both...
Show moreLiquid crystal display (LCD) has become ubiquitous and indispensable in our daily life. Recently, it faces strong competition from organic light emitting diode (OLED). In order to maintain a strong leader position, LCD camp has an urgent need to enrich the color performance and reduce the power consumption. This dissertation focuses on solving these two emerging and important challenges. In the first part of the dissertation we investigate the quantum dot (QD) technology to improve the both the color gamut and the light efficiency of LCD. QD emits saturated color and grants LCD the capability to reproduce color vivid images. Moreover, the QD emission spectrum can be custom designed to match to transmission band of color filters. To fully take advantage of QD's unique features, we propose a systematic modelling of the LCD backlight and optimize the QD spectrum to simultaneously maximize the color gamut and light efficiency. Moreover, QD enhanced LCD demonstrates several advantages: excellent ambient contrast, negligible color shift and controllable white point. Besides three primary LCD, We also present a spatiotemporal four-primary QD enhanced LCD. The LCD's color is generated partially from time domain and partially from spatial domain. As a result, this LCD mode offers 1.5(&)#215; increment in spatial resolution, 2(&)#215; brightness enhancement, slightly larger color gamut and mitigated LC response requirement (~4ms). It can be employed in the commercial TV to meet the challenging Energy star 6 regulation. Besides conventional LCD, we also extend the QD applications to liquid displays and smart lighting devices. The second part of this dissertation focuses on improving the LCD light efficiency. Conventional LCD system has fairly low light efficiency (4%~7%) since polarizers and color filters absorb 50% and 67% of the incoming light respectively. We propose two approaches to reduce the light loss within polarizers and color filters. The first method is a polarization preserving backlight system. It can be combined with linearly polarized light source to boost the LCD efficiency. Moreover, this polarization preserving backlight offers high polarization efficiency (~77.8%), 2.4(&)#215; on-axis luminance enhancement, and no need for extra optics films. The second approach is a LCD backlight system with simultaneous color/polarization recycling. We design a novel polarizing color filter with high transmittance ((>)90%), low absorption loss (~3.3%), high extinction ratio ((>)10,000:1) and large angular tolerance (up to (&)#177;50?). This polarizing color filter can be used in LCD system to introduce the color/polarization recycling and accordingly boost LCD efficiency by ~3 times. These two approaches open new gateway for ultra-low power LCDs. In the final session of this dissertation, we demonstrate a low power and color vivid reflective liquid crystal on silicon (LCOS) display with low viscosity liquid crystal mixture. Compared with commercial LC material, the new LC mixture offers ~4X faster response at 20oC and ~8X faster response at ?20oC. This fast response LC material enables the field-sequential-color (FSC) driving for power saving. It also leads to several attractive advantages: sub-millisecond response time at room temperature, vivid color even at ?20oC, high brightness, excellent ambient contrast ratio, and suppressed color breakup. With this material improvement, LCOS display can be promising for the emerging wearable display market.
Show less
Date Issued: 2015
Identifier: CFE0006225, ucf:51078
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0006225

Title: Optical Fluid-based Photonic and Display Devices.
Creator: Xu, Su, Wu, Shintson, Li, Guifang, Moharam, M., Wu, Xinzhang, University of Central Florida
Abstract / Description: Conventional solid-state photonic devices exhibit an ultra-high optical performance and durability, but minimal adaptability. Recently, optical fluid-based photonic and display devices are emerging. By dynamically manipulating the optical interface formed by liquids, the optical output can be reconfigured or adaptively tuned in real time. Such devices exhibit some unique characteristics that are not achievable in conventional solid-state photonic devices. Therefore, they open a gateway for...
Show moreConventional solid-state photonic devices exhibit an ultra-high optical performance and durability, but minimal adaptability. Recently, optical fluid-based photonic and display devices are emerging. By dynamically manipulating the optical interface formed by liquids, the optical output can be reconfigured or adaptively tuned in real time. Such devices exhibit some unique characteristics that are not achievable in conventional solid-state photonic devices. Therefore, they open a gateway for new applications, such as image and signal processing, optical communication, sensing, and lab-on-a-chip, etc. Different operation principles of optical fluid-based photonic devices have been proposed, for instance fluidic pressure, electrochemistry, thermal effect, environmentally adaptive hydrogel, electro-wetting and dielectrophoresis. In this dissertation, several novel optical fluid-based photonic and display devices are demonstrated. Their working principles are described and electro-optic properties investigated.The first part involves photonic devices based on fluidic pressure. Here, we present a membrane-encapsulated liquid lens actuated by a photo-activated polymer. This approach paves a way to achieve non-mechanical driving and easy integration with other photonic devices. Next, we develop a mechanical-wetting lens for visible and short-wavelength infrared applications. Such a device concept can be extended to longer wavelength if proper liquids are employed.In the second part, we reveal some new photonic and display devices based on dielectrophoretic effects. We conceive a dielectric liquid microlens with well-shaped electrode for fixing the droplet position and lowering the operating voltage. To widen the dynamic range, we demonstrate an approach to enable focus tuning from negative to positive or vice versa in a single dielectric lens without any moving part. The possibility of fabricating microlens arrays with different aperture and density using a simple method is also proposed. Furthermore, the fundamental electro-optic characteristics of dielectric liquid droplets are studied from the aspects of operating voltage, frequency and droplet size. In addition to dielectric liquid lenses, we also demonstrate some new optical switches based on dielectrophoretic effect, e.g., optical switch based on voltage-stretchable liquid crystal droplet, variable aperture or position-shifting droplet. These devices work well in the visible and near infrared spectral ranges. We also extend this approach to display and show a polarizer-free and color filter-free display. Simple fabrication, low power consumption, polarization independence, relatively low operating voltage as well as reasonably fast switching time are their key features.
Show less
Date Issued: 2012
Identifier: CFE0004620, ucf:49943
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0004620

Title: Optically isotropic liquid crystals for display and photonic applications.
Creator: Yan, Jin, Wu, Shintson, Zeldovich, Boris, Schoenfeld, Winston, Fang, Jiyu, University of Central Florida
Abstract / Description: For the past few decades, tremendous progress has been made on liquid crystal display (LCD) technologies in terms of stability, resolution, contrast ratio, and viewing angle. The remaining challenge is response time. The state-of-the-art response time of a nematic liquid crystal is a few milliseconds. Faster response time is desirable in order to reduce motion blur and to realize color sequential display using RGB LEDs, which triples the optical efficiency and resolution density. Polymer...
Show moreFor the past few decades, tremendous progress has been made on liquid crystal display (LCD) technologies in terms of stability, resolution, contrast ratio, and viewing angle. The remaining challenge is response time. The state-of-the-art response time of a nematic liquid crystal is a few milliseconds. Faster response time is desirable in order to reduce motion blur and to realize color sequential display using RGB LEDs, which triples the optical efficiency and resolution density. Polymer-stabilized blue phase liquid crystal (PS-BPLC) is a strong candidate for achieving fast response time because its self-assembled cubic structure greatly reduces the coherence length. The response time is typically in the submillisecond range and can even reach microsecond under optimized conditions. Moreover, it exhibit several attractive features, such as no need for surface alignment layer, intrinsic wide viewing angle, and cell gap insensitivity if an in-plane-switching (IPS) cell is employed. In this dissertation, recent progresses in polymer-stabilized blue phases, or more generally optically-isotropic liquid crystals, are presented. Potential applications in display and photonic devices are also demonstrated.In Chapter 1, a brief introduction of optically isotropic liquid crystals is given. In Chapter 2, we investigate each component of polymer-stabilized blue phase materials and provide guidelines for material preparation and optimization. In Chapter 3, the electro-optical properties of PS-BPLCs, including electric-field-induced birefringence and dynamic behaviors are characterized. Theoretical models are proposed to explain the physical phenomena. Good agreements between experimental data and models are obtained. The proposed models also provide useful guidelines for both material and device optimizations. Four display and photonic devices using PS-BPLCs are demonstrated in Chapter 4. First, by red-shifting the Bragg reflection and using circular polarizers, we reduce the LCD driving voltage by 35% as compared to a short-pitch BPLC while maintaining high contrast ratio and submillisecond response time. Second, a turning film which is critically needed for widening the viewing angle of a vertical field switching (VFS) BPLC mode is designed. With this film, the viewing angle of VFS is widened to (&)#177; 80(&)deg; in horizontal direction and (&)#177; 50(&)deg; in vertical direction. Without this turning film, the viewing angle is only (&)#177;30(&)deg;, which is too narrow for most applications. Third, a reflective BPLC display with vivid colors, submillisecond response time, and natural grayscales is demonstrated for the first time. The proposed BPLC reflective display opens a new gateway for 3D reflective displays; it could make significant impact to display industry. Finally, we demonstrate a tunable phase grating with a high diffraction efficiency of 40% and submillisecond response time. This tunable grating exhibits great potential for photonic and display applications, such as optical interconnects, beam steering, and projection displays.
Show less
Date Issued: 2013
Identifier: CFE0005279, ucf:50551
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0005279

Title: MODELING OF LIQUID CRYSTAL DISPLAY AND PHOTONIC DEVICES.
Creator: Ge, Zhibing, Wu, Shin-Tson, University of Central Florida
Abstract / Description: Liquid crystal (LC) materials have been widely applied in electro-optical devices, among which display is the most successful playground and numerous new applications in photonic areas (such as laser beam steering devices) are also emerging. To well guide the device design for optimum performance, accurate modeling is of prior and practical importance. Generally, the modeling of LC devices includes two parts in sequence: accurate LC molecule deformation extraction under external electric...
Show moreLiquid crystal (LC) materials have been widely applied in electro-optical devices, among which display is the most successful playground and numerous new applications in photonic areas (such as laser beam steering devices) are also emerging. To well guide the device design for optimum performance, accurate modeling is of prior and practical importance. Generally, the modeling of LC devices includes two parts in sequence: accurate LC molecule deformation extraction under external electric fields and optical calculation thereafter for the corresponding electro-optical behaviors. In this dissertation, first, hybrid finite element method and finite difference method are developed to minimize the free energy of the LC systems. In this part of study, with computer-aided derivation, the full forms of the LC free energy equations without any simplification can be obtained. Besides, Galerkin's method and weak form technique are further introduced to successfully degrade the high order nonlinear derivative terms associated with the free energy equations into ones that can be treated by first order interpolation functions for high accuracy. The developed modeling methods for LC deformation are further employed to study display structures, such as 2D and 3D in-plane switching LC cells, and provides accurate results. Followed is the optical modeling using extended Jones matrix and beam propagation method to calculate the electro-optical performances of different devices, according to their amplitude modulation property or diffractive one. The developed methods are further taken to assist the understanding, development, and optimization of the display and photonic devices. For their application in the display area, sunlight readable transflective LCDs for mobile devices and the related optical films for wide viewing angle are developed and studied. New cell structure using vertically aligned liquid crystal mode is developed and studied to obtain a single cell gap, high light efficiency transflective LCD that can be driven by one gray scale control circuit for both transmissive and reflective modes. And employing an internal wire grid polarizer into a fringe field switching cell produces a single cell gap and wide viewing angle display with workable reflective mode under merely two linear polarizers. To solve the limited viewing angle of conventional circular polarizers, Poincaré sphere as an effective tool is taken to trace and understand the polarization change of the incident light throughout the whole LC system. This study further guides the design of high performance circular polarizers that can consist of purely uniaxial plates or a combination of uniaxial and biaxial plates. The developed circular polarizers greatly enhance the viewing angle of transflective LCDs. Especially, the circular polarizer design using a biaxial film can even provide comparable wide viewing angle performance for the same vertically aligned cell as it is used between merely two linear polarizers, while using circular polarizers can greatly boost the display brightness. As for the beam steering device modeling, the developed LC deformation method is taken to accurately calculate the associated LC director distribution in the spatial light modulator, while beam propagation method and Fourier transformation technique are combined to calculate the near and far fields from such devices. The modeling helps to better understand the origins and formations of the disclinations associated with the fringe fields, which further result in reduced steering efficiency and output asymmetric polarizations between positive and negative diffractions. Optimization in both voltage profile and driving methods is conducted to well tune the LC deformation under strong fringe fields and improve the light efficiency.
Show less
Date Issued: 2007
Identifier: CFE0001908, ucf:47481
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0001908

Title: WIDE VIEWING ANGLE LIQUID CRYSTAL DISPLAYS.
Creator: Hong, Qi, Wu, Shin-Tson, University of Central Florida
Abstract / Description: In this dissertation, novel phase compensation technologies are applied to the designs of wide viewing angle and high transmittance liquid crystal displays. First, a design of wide viewing angle liquid crystal displays utilizing crossed linear polarizers is proposed. The designed multi-domain vertical-alignment liquid crystal display predicts superb contrast ratio over wide viewing angles. Next, to increase the bright state transmittance while maintain the high contrast. Finally, to reduce...
Show moreIn this dissertation, novel phase compensation technologies are applied to the designs of wide viewing angle and high transmittance liquid crystal displays. First, a design of wide viewing angle liquid crystal displays utilizing crossed linear polarizers is proposed. The designed multi-domain vertical-alignment liquid crystal display predicts superb contrast ratio over wide viewing angles. Next, to increase the bright state transmittance while maintain the high contrast. Finally, to reduce the cost and improve the applicability of the broadband and wide-view circular polarizer, the device configuration of the broadband and wide-view circular polarizer is significantly simplified by the application of biaxial compensation films. The produced states of polarization remain close to the ideal circular polarization over a wide range of incident angles within the visual spectrum. With this circular polarizer, the presented wide-view liquid crystal display predicts high contrast ratio as well as high and uniform transmittance over wide viewing angles within the visual spectrum. ratio, wide viewing angle circular polarizers are developed. The produced states of polarization are very close to the ideal circular state of polarization over a wide range of incident angles within the visual spectrum. This guarantees not only high contrast ratio but also high and uniform transmittance.
Show less
Date Issued: 2006
Identifier: CFE0001378, ucf:46963
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0001378

Title: Liquid crystal phase modulation for beam steering and near-eye displays.
Creator: Lee, Yun Han, Wu, Shintson, Moharam, Jim, Likamwa, Patrick, Dong, Yajie, University of Central Florida
Abstract / Description: Liquid crystal spatial phase modulator plays an important role in laser beam steering, wave-front shaping and correction, optical communication, optical computation and holography. One fundamental limitation lays in the response time of liquid crystal reorientation. To achieve fast response time, polymer-network liquid crystals are therefore proposed. By incorporating polymer network in a liquid crystal host, the response time can be reduced by a factor of 100. However, the polymer network...
Show moreLiquid crystal spatial phase modulator plays an important role in laser beam steering, wave-front shaping and correction, optical communication, optical computation and holography. One fundamental limitation lays in the response time of liquid crystal reorientation. To achieve fast response time, polymer-network liquid crystals are therefore proposed. By incorporating polymer network in a liquid crystal host, the response time can be reduced by a factor of 100. However, the polymer network introduces hysteresis, light scattering, and high voltage. The motivation for a fast-response liquid crystal phase modulator will be discussed in the first chapter. In the second chapter, we introduce our discovery that by modifying the polymer network structure with C12A, the hysteresis from the network can be eliminated, while keeping response time at the same order. In the third chapter, we introduce a new route toward fast response time. Instead of randomly generated network, we propose to utilize two-photon-polymerization method to create well-defined polymer scaffold. By introducing polymer scaffold, we demonstrated a 7-fold faster response in comparison with traditional phase modulators, while hysteresis, scattering, and high driving voltage are all eliminated. In the fourth chapter, we introduce phase modulation based on Pancharatnam-Berry (PB) phase principle. In this type of phase modulation, the defect at 2? phase reset in conventional phase modulators can be avoided. Therefore, a higher optical quality can be achieved, making them suitable for display and imaging applications. We demonstrated a fast PB lens with response time less than 1 ms, and using which we realized the first PB lens-based additive light field display to generate true (monocular) 3D content with computationally rendered images. In chapter five, we demonstrate the resolution enhancement based on pixel-shifting of fast PB gratings. By synchronizing display content with shifting pixels, we demonstrated ~2x enhanced resolution and significantly reduced screen-door artifact.In chapter six, we report our discovery of reflective polarization volume gratings (PVGs) based on self-organized liquid crystal helix. We achieved a large deflection angle ((>)50(&)deg; in glass), high diffraction efficiency ((>)95%), and unique polarization selectivity (distinction ratio (>) 100:1). A system integrating PB optical elements is described in chapter seven.Finally, we will summarize our major accomplishments in chapter eight.
Show less
Date Issued: 2018
Identifier: CFE0007760, ucf:52389
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0007760

Title: High dynamic range display systems.
Creator: Zhu, Ruidong, Wu, Shintson, Moharam, Jim, Likamwa, Patrick, Fang, Jiyu, University of Central Florida
Abstract / Description: High contrast ratio (CR) enables a display system to faithfully reproduce the real objects. However, achieving high contrast, especially high ambient contrast (ACR), is a challenging task. In this dissertation, two display systems with high CR are discussed: high ACR augmented reality (AR) display and high dynamic range (HDR) display. For an AR display, we improved its ACR by incorporating a tunable transmittance liquid crystal (LC) film. The film has high tunable transmittance range, fast...
Show moreHigh contrast ratio (CR) enables a display system to faithfully reproduce the real objects. However, achieving high contrast, especially high ambient contrast (ACR), is a challenging task. In this dissertation, two display systems with high CR are discussed: high ACR augmented reality (AR) display and high dynamic range (HDR) display. For an AR display, we improved its ACR by incorporating a tunable transmittance liquid crystal (LC) film. The film has high tunable transmittance range, fast response time, and is fail-safe. To reduce the weight and size of a display system, we proposed a functional reflective polarizer, which can also help people with color vision deficiency. As for the HDR display, we improved all three aspects of the hardware requirements: contrast ratio, color gamut and bit-depth. By stacking two liquid crystal display (LCD) panels together, we have achieved CR over one million to one, 14-bit depth with 5V operation voltage, and pixel-by-pixel local dimming. To widen color gamut, both photoluminescent and electroluminescent quantum dots (QDs) have been investigated. Our analysis shows that with QD approach, it is possible to achieve over 90% of the Rec. 2020 color gamut for a HDR display. Another goal of an HDR display is to achieve the 12-bit perceptual quantizer (PQ) curve covering from 0 to 10,000 nits. Our experimental results indicate that this is difficult with a single LCD panel because of the sluggish response time. To overcome this challenge, we proposed a method to drive the light emitting diode (LED) backlight and the LCD panel simultaneously. Besides relatively fast response time, this approach can also mitigate the imaging noise. Finally yet importantly, we improved the display pipeline by using a HDR gamut mapping approach to display HDR contents adaptively based on display specifications. A psychophysical experiment was conducted to determine the display requirements.
Show less
Date Issued: 2017
Identifier: CFE0006930, ucf:51668
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0006930

Title: High Performance Three-Dimensional Display Based on Polymer-Stabilized Blue Phase Liquid Crystal.
Creator: Liu, Yifan, Wu, Shintson, Kik, Pieter, Likamwa, Patrick, Zhai, Lei, University of Central Florida
Abstract / Description: Autostereoscopic 2D/3D (two-dimension/three-dimension) switchable display has been attracting great interest in research and practical applications for several years. Among different autostereoscopic solutions, direction-multiplexed 3D displays based on microlens array or parallax barrier are viewed as the most promising candidates, due to their compatibility with conventional 2D display technologies. These 2D/3D switchable display system designs rely on fast switching display panels and...
Show moreAutostereoscopic 2D/3D (two-dimension/three-dimension) switchable display has been attracting great interest in research and practical applications for several years. Among different autostereoscopic solutions, direction-multiplexed 3D displays based on microlens array or parallax barrier are viewed as the most promising candidates, due to their compatibility with conventional 2D display technologies. These 2D/3D switchable display system designs rely on fast switching display panels and photonics devices, including adaptive focus microlens array and switchable slit array. Polymer-stabilized blue phase liquid crystal (PS-BPLC) material provides a possible solution to meet the aforementioned fast response time requirement. However, present display and photonic devices based on blue phase liquid crystals suffer from several drawbacks, such as low contrast ratio, relatively large hysteresis and short lifetime. In this dissertation, we investigate the material properties of PS-BPLC so as to improve the performance of PS-BPLC devices. Then we propose several PS-BPLC devices for the autostereoscopic 2D/3D switchable display system designs. In the first part we evaluate the optical rotatory power (ORP) of blue phase liquid crystal, which is proven to be the primary reason for causing the low contrast ratio of PS-BPLC display systems. Those material parameters affecting the ORP of PS-BPLC are investigated and an empirical equation is proposed to calculate the polarization rotation angle in a PS-BPLC cell. Then several optical compensation methods are proposed to compensate the impact of ORP and to improve the contrast ratio of a display system. The pros and cons of each solution are discussed accordingly. In the second part, we propose two adaptive focus microlens array structures and a high efficiency switchable slit array based on the PS-BPLC materials. By optimizing the design parameters, these devices can be applied to the 2D/3D switchable display systems. In the last section, we focus on another factor that affects the performance and lifetime of PS-BPLC devices and systems: the UV exposure condition. The impact of UV exposure wavelength, dosage, uniformity, and photo-initiator are investigated. We demonstrate that by optimizing the UV exposure condition, we can reduce the hysteresis of PS-BPLC and improve its long term stability.
Show less
Date Issued: 2014
Identifier: CFE0005370, ucf:50466
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0005370

Title: REFRACTIVE INDICES OF LIQUID CRYSTALS AND THEIR APPLICATIONS IN DISPLAY AND PHOTONIC DEVICES.
Creator: Li, Jun, Wu, Shin-Tson, University of Central Florida
Abstract / Description: Liquid crystals (LCs) are important materials for flat panel display and photonic devices. Most LC devices use electrical field-, magnetic field-, or temperature-induced refractive index change to modulate the incident light. Molecular constituents, wavelength, and temperature are the three primary factors determining the liquid crystal refractive indices: ne and no for the extraordinary and ordinary rays, respectively. In this dissertation, we derive several physical models for describing...
Show moreLiquid crystals (LCs) are important materials for flat panel display and photonic devices. Most LC devices use electrical field-, magnetic field-, or temperature-induced refractive index change to modulate the incident light. Molecular constituents, wavelength, and temperature are the three primary factors determining the liquid crystal refractive indices: ne and no for the extraordinary and ordinary rays, respectively. In this dissertation, we derive several physical models for describing the wavelength and temperature effects on liquid crystal refractive indices, average refractive index, and birefringence. Based on these models, we develop some high temperature gradient refractive index LC mixtures for photonic applications, such as thermal tunable liquid crystal photonic crystal fibers and thermal solitons. Liquid crystal refractive indices decrease as the wavelength increase. Both ne and no saturate in the infrared region. Wavelength effect on LC refractive indices is important for the design of direct-view displays. In Chapter 2, we derive the extended Cauchy models for describing the wavelength effect on liquid crystal refractive indices in the visible and infrared spectral regions based on the three-band model. The three-coefficient Cauchy model could be used for describing the refractive indices of liquid crystals with low, medium, and high birefringence, whereas the two-coefficient Cauchy model is more suitable for low birefringence liquid crystals. The critical value of the birefringence is deltan~0.12. Temperature is another important factor affecting the LC refractive indices. The thermal effect originated from the lamp of projection display would affect the performance of the employed liquid crystal. In Chapter 3, we derive the four-parameter and three-parameter parabolic models for describing the temperature effect on the LC refractive indices based on Vuks model and Haller equation. We validate the empirical Haller equation quantitatively. We also validate that the average refractive index of liquid crystal decreases linearly as the temperature increases. Liquid crystals exhibit a large thermal nonlinearity which is attractive for new photonic applications using photonic crystal fibers. We derive the physical models for describing the temperature gradient of the LC refractive indices, ne and no, based on the four-parameter model. We find that LC exhibits a crossover temperature To at which dno/dT is equal to zero. The physical models of the temperature gradient indicate that ne, the extraordinary refractive index, always decreases as the temperature increases since dne/dT is always negative, whereas no, the ordinary refractive index, decreases as the temperature increases when the temperature is lower than the crossover temperature (dno/dT<0 when the temperature is lower than To) and increases as the temperature increases when the temperature is higher than the crossover temperature (dno/dT>0 when the temperature is higher than To ). Measurements of LC refractive indices play an important role for validating the physical models and the device design. Liquid crystal is anisotropic and the incident linearly polarized light encounters two different refractive indices when the polarization is parallel or perpendicular to the optic axis. The measurement is more complicated than that for an isotropic medium. In Chapter 4, we use a multi-wavelength Abbe refractometer to measure the LC refractive indices in the visible light region. We measured the LC refractive indices at six wavelengths, lamda=450, 486, 546, 589, 633 and 656 nm by changing the filters. We use a circulating constant temperature bath to control the temperature of the sample. The temperature range is from 10 to 55 oC. The refractive index data measured include five low-birefringence liquid crystals, MLC-9200-000, MLC-9200-100, MLC-6608 (delta_epsilon=-4.2), MLC-6241-000, and UCF-280 (delta_epsilon=-4); four middle-birefringence liquid crystals, 5CB, 5PCH, E7, E48 and BL003; four high-birefringence liquid crystals, BL006, BL038, E44 and UCF-35, and two liquid crystals with high dno/dT at room temperature, UCF-1 and UCF-2. The refractive indices of E7 at two infrared wavelengths lamda=1.55 and 10.6 um are measured by the wedged-cell refractometer method. The UV absorption spectra of several liquid crystals, MLC-9200-000, MLC-9200-100, MLC-6608 and TL-216 are measured, too. In section 6.5, we also measure the refractive index of cured optical films of NOA65 and NOA81 using the multi-wavelength Abbe refractometer. In Chapter 5, we use the experimental data measured in Chapter 4 to validate the physical models we derived, the extended three-coefficient and two-coefficient Cauchy models, the four-parameter and three-parameter parabolic models. For the first time, we validate the Vuks model using the experimental data of liquid crystals directly. We also validate the empirical Haller equation for the LC birefringence delta_n and the linear equation for the LC average refractive index . The study of the LC refractive indices explores several new photonic applications for liquid crystals such as high temperature gradient liquid crystals, high thermal tunable liquid crystal photonic crystal fibers, the laser induced 2D+1 thermal solitons in nematic crystals, determination for the infrared refractive indices of liquid crystals, comparative study for refractive index between liquid crystals and photopolymers for polymer dispersed liquid crystal (PDLC) applications, and so on. In Chapter 6, we introduce these applications one by one. First, we formulate two novel liquid crystals, UCF-1 and UCF-2, with high dno/dT at room temperature. The dno/dT of UCF-1 is about 4X higher than that of 5CB at room temperature. Second, we infiltrate UCF-1 into the micro holes around the silica core of a section of three-rod core PCF and set up a highly thermal tunable liquid crystal photonic crystal fiber. The guided mode has an effective area of 440 ƒÝm2 with an insertion loss of less than 0.5dB. The loss is mainly attributed to coupling losses between the index-guided section and the bandgap-guided section. The thermal tuning sensitivity of the spectral position of the bandgap was measured to be 27 nm/degree around room temperature, which is 4.6 times higher than that using the commercial E7 LC mixture operated at a temperature above 50 degree C. Third, the novel liquid crystals UCF-1 and UCF-2 are preferred to trigger the laser-induced thermal solitons in nematic liquid crystal confined in a capillary because of the high positive temperature gradient at room temperature. Fourth, we extrapolate the refractive index data measured at the visible light region to the near and far infrared region basing on the extended Cauchy model and four-parameter model. The extrapolation method is validated by the experimental data measured at the visible light and infrared light regions. Knowing the LC refractive indices at the infrared region is important for some photonic devices operated in this light region. Finally, we make a completely comparative study for refractive index between two photocurable polymers (NOA65 and NOA81) and two series of Merck liquid crystals, E-series (E44, E48, and E7) and BL-series (BL038, BL003 and BL006) in order to optimize the performance of polymer dispersed liquid crystals (PDLC). Among the LC materials we studied, BL038 and E48 are good candidates for making PDLC system incorporating NOA65. The BL038 PDLC cell shows a higher contrast ratio than the E48 cell because BL038 has a better matched ordinary refractive index, higher birefringence, and similar miscibility as compared to E48. Liquid crystals having a good miscibility with polymer, matched ordinary refractive index, and higher birefringence help to improve the PDLC contrast ratio for display applications. In Chapter 7, we give a general summary for the dissertation.
Show less
Date Issued: 2005
Identifier: CFE0000808, ucf:46677
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0000808

Title: Advanced liquid crystal materials for display and photonic applications.
Creator: Chen, Yuan, Wu, Shintson, Zeldovich, Boris, Schoenfeld, Winston, Fang, Jiyu, University of Central Florida
Abstract / Description: Thin-film-transistor (TFT) liquid crystal display (LCD) has been widely used in smartphones, pads, laptops, computer monitors, and large screen televisions, just to name a few. A great deal of effort has been delved into wide viewing angle, high resolution, low power consumption, and vivid color. However, relatively slow response time and low transmittance remain as technical challenges. To improve response time, several approaches have been developed, such as low viscosity liquid crystals,...
Show moreThin-film-transistor (TFT) liquid crystal display (LCD) has been widely used in smartphones, pads, laptops, computer monitors, and large screen televisions, just to name a few. A great deal of effort has been delved into wide viewing angle, high resolution, low power consumption, and vivid color. However, relatively slow response time and low transmittance remain as technical challenges. To improve response time, several approaches have been developed, such as low viscosity liquid crystals, overdrive and undershoot voltage schemes, thin cell gap with a high birefringence liquid crystal, and elevated temperature operation. The state-of-the-art gray-to-gray response time of a nematic LC device is about 5 ms, which is still not fast enough to suppress the motion picture image blur. On the other hand, the LCD panel's transmittance is determined by the backlight, polarizers, TFT aperture ratio, LC transmittance, and color filters. Recently, a fringe-field-switching mode using a negative dielectric anisotropy (??) LC (n-FFS) has been demonstrated, showing high transmittance (98%), single gamma curve, and cell gap insensitivity. It has potential to replace the commonly used p-FFS (FFS using positive ?? LC) for mobile displays.With the urgent need of submillisecond response time for enabling color sequential displays, polymer-stabilized blue phase liquid crystal (PS-BPLC) has become an increasingly important technology trend for information display and photonic applications. BPLCs exhibit several attractive features, such as reasonably wide temperature range, submillisecond gray-to-gray response time, no need for alignment layer, optically isotropic voltage-off state, and large cell gap tolerance. However, some bottlenecks such as high operation voltage, hysteresis, residual birefringence, and slow charging issue due to the large capacitance, remain to be overcome before their widespread applications can be realized. The material system of PS-BPLC, including nematic LC host, chiral dopant, and polymer network, are discussed in detail. Each component plays an essential role affecting the electro-optic properties and the stability of PS-BPLC.In a PS-BPLC system, in order to lower the operation voltage the host LC usually has a very large dielectric anisotropy (??(>)100), which is one order of magnitude larger than that of a nematic LC. Such a large ?? not only leads to high viscosity but also results in a large capacitance. High viscosity slows down the device fabrication process and increases device response time. On the other hand, large capacitance causes slow charging time to each pixel and limits the frame rate. To reduce viscosity, we discovered that by adding a small amount (~6%) of diluters, the response time of the PS-BPLC is reduced by 2X-3X while keeping the Kerr constant more or less unchanged. Besides, several advanced PS-BPLC materials and devices have been demonstrated. By using a large ?? BPLC, we have successfully reduced the voltage to (<)10V while maintaining submillisecond response time. Finally we demonstrated an electric field-indeced monodomain PS-BPLC, which enables video-rate reflective display with vivid colors. The highly selective reflection in polarization makes it promising for photonics application.Besides displays in the visible spectral region, LC materials are also very useful electro-optic media for near infrared and mid-wavelength infrared (MWIR) devices. However, large absorption has impeded the widespread application in the MWIR region. With delicate molecular design strategy, we balanced the absorption and liquid crystal phase stability, and proposed a fluoro-terphenyl compound with low absorption in both MWIR and near IR regions. This compound serves as an important first example for future development of low-loss MWIR liquid crystals, which would further expand the application of LCs for amplitude and/or phase modulation in MWIR region.
Show less
Date Issued: 2014
Identifier: CFE0005314, ucf:50531
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0005314

Title: High-efficiency Blue Phase Liquid Crystal Displays.
Creator: Li, Yan, Wu, Shintson, Saleh, Bahaa, Zeldovich, Boris, Wu, Xinzhang, University of Central Florida
Abstract / Description: Blue phase liquid crystals (BPLCs) have a delicate lattice structure existing between chiral nematic and isotropic phases, with a stable temperature range of about 2 K. But due to short coherent length, these self-assembled nano-structured BPLCs have a fast response time. In the past three decades, the application of BPLC has been rather limited because of its narrow temperature range. In 2002, Kikuchi et al. developed a polymer stabilization method to extend the blue-phase temperature range...
Show moreBlue phase liquid crystals (BPLCs) have a delicate lattice structure existing between chiral nematic and isotropic phases, with a stable temperature range of about 2 K. But due to short coherent length, these self-assembled nano-structured BPLCs have a fast response time. In the past three decades, the application of BPLC has been rather limited because of its narrow temperature range. In 2002, Kikuchi et al. developed a polymer stabilization method to extend the blue-phase temperature range to more than 60 K. This opens a new gateway for display and photonic applications.In this dissertation, I investigate the material properties of polymer-stabilized BPLCs. According the Gerber's model, the Kerr constant of a BPLC is linearly proportional to the dielectric anisotropy of the LC host. Therefore, in the frequency domain, the relaxation of the Kerr constant follows the same trend as the dielectric relaxation of the host LC. I have carried out experiments to validate the theoretical predictions, and proposed a model called extended Cole-Cole model to describe the relaxation of the Kerr constant. On the other hand, because of the linear relationship, the Kerr constant should have the same sign as the dielectric anisotropy of the LC host; that is, a positive or negative Kerr constant results from positive or negative host LCs, respectively. BPLCs with a positive Kerr constant have been studied extensively, but there has been no study on negative polymer-stabilized BPLCs. Therefore, I have prepared a BPLC mixture using a negative dielectric anisotropy LC host and investigated its electro-optic properties. I have demonstrated that indeed the induced birefringence and Kerr constant are of negative sign. Due to the fast response time of BPLCs, color sequential display is made possible without color breakup. By removing the spatial color filters, the optical efficiency and resolution density are both tripled. With other advantages such as alignment free and wide viewing angle, polymer-stabilized BPLC is emerging as a promising candidate for next-generation displays.However, the optical efficiency of the BPLC cell is relatively low and the operating voltage is quite high using conventional in-plane-switching electrodes. I have proposed several device structures for improving the optical efficiency of transmissive BPLC cells. Significant improvement in transmittance is achieved by using enhanced protrusion electrodes, and a 100% transmittance is achievable using complementary enhanced protrusion electrode structure.For a conventional transmissive blue phase LCD, although it has superb performances indoor, when exposed to strong sunlight the displayed images could be washed out, leading to a degraded contrast ratio and readability. To overcome the sunlight readability problem, a common approach is to adaptively boost the backlight intensity, but the tradeoff is in the increased power consumption. Here, I have proposed a transflective blue phase LCD where the backlight is turned on in dark surroundings while ambient light is used to illuminate the displayed images in bright surroundings. Therefore, a good contrast ratio is preserved even for a strong ambient. I have proposed two transflective blue phase LCD structures, both of which have single cell gap, single gamma driving, reasonably wide view angle, low power consumption, and high optical efficiency. Among all the 3D technologies, integral imaging is an attractive approach due to its high efficiency and real image depth. However, the optimum observation distance should be adjusted as the displayed image depth changes. This requires a fast focal length change of an adaptive lens array. BPLC adaptive lenses are a good candidate because of their intrinsic fast response time. I have proposed several BPLC lens structures which are polarization independent and exhibit a parabolic phase profile in addition to fast response time.To meet the low power consumption requirement set by Energy Star, high optical efficiency is among the top lists of next-generation LCDs. In this dissertation, I have demonstrated some new device structures for improving the optical efficiency of a polymer-stabilized BPLC transmissive display and proposed sunlight readable transflective blue-phase LCDs by utilizing ambient light to reduce the power consumption. Moreover, we have proposed several blue-phase LC adaptive lenses for high efficiency 3D displays.
Show less
Date Issued: 2012
Identifier: CFE0004787, ucf:49725
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0004787

Title: Vertical Field Switching Blue Phase Liquid Crystals for Field Sequential Color Displays.
Creator: Cheng, Hui-Chuan, Wu, Shintson, Likamwa, Patrick, Schoenfeld, Winston, Wu, Xinzhang, University of Central Florida
Abstract / Description: Low power consumption is a critical requirement for all liquid crystal display (LCD) devices. A field sequential color (FSC) LCD was proposed by using red (R), green (G) and blue (B) LEDs and removing the lossy component of color filters which only transmits ~30% of the incoming white light. Without color filters, FSC LCDs exhibit a ~3X higher optical efficiency and 3X higher resolution density as compared to the conventional color filters-based LCDs. However, color breakup (CBU) is a most...
Show moreLow power consumption is a critical requirement for all liquid crystal display (LCD) devices. A field sequential color (FSC) LCD was proposed by using red (R), green (G) and blue (B) LEDs and removing the lossy component of color filters which only transmits ~30% of the incoming white light. Without color filters, FSC LCDs exhibit a ~3X higher optical efficiency and 3X higher resolution density as compared to the conventional color filters-based LCDs. However, color breakup (CBU) is a most disturbing defect that degrades the image quality in FSC displays. CBU can be observed in stationary or moving images. It manifests in FSC LCDs when there is a relative speed between the images and observers' eyes, and the observer will see the color splitting patterns or rainbow effect at the boundary between two different colors.In Chapter 2, we introduce a five-primary display by adding additional yellow(Y) and cyan(C) colors. From the analysis and simulations, five primaries can provide wide color gamut and meanwhile the white brightness is increased, as compared to the three-primary. Based on the five-primary theorem, we propose a method to reduce CBU of FSC LCDs by using RGBYC LEDs instead of RGB LEDs in the second section. Without increasing the sub-frame rate as three-primary LCDs, we can reduce the CBU by utilizing proper color sequence and weighting ratios. In addition, the color gamut achieves 140% NTSC and the white brightness increases by more than 13%, as compared to the three-primary FSC LCDs.Another strategy to suppress CBU is using higher field frequency, such as 540 Hz or even up to 1000 Hz. However, this approach needs liquid crystals with a very fast response time ((<)1 ms). Recently, the polymer-stabilized blue-phase liquid crystal (PS-BPLC) draws great attentions because of improved temperature range which enables the applications for photonic devices and displays. PS-BPLC is a good candidate for FSC LCDs because of its submillisecond gray-to-gray response time, no need for alignment layer, and isotropic dark state. So far, almost all the BPLC devices utilize planar or protruded in-plane switching (IPS) electrode configuration. The structure of planar IPS is relatively simple, but the operating voltage is too high for thin-film transistor (TFT) addressing. Moreover, high voltage causes deformation of polymer network and induces a noticeable hysteresis. Protruded IPS is helpful for lowering the operating voltage, but the manufacturing process becomes more sophisticated. In Chapter 3, we propose a vertical field switching (VFS) mode for blue phase LCDs. The simple structure of VFS cell generates uniform vertical fields on the BPLC materials. From our experimental results, the operation voltage can be reduced to ~10Vrms while eliminating the hysteresis. We also defined a critical field below which hysteresis does not occur. Above critical field, lattice distortion and other irreversible phase transition processes would occur. As a result, the associated response time would be slower. Therefore, VFS mode also shows faster response time than IPS mode. The operating voltage can be further reduced by choosing an optimized cell gap and a larger oblique incident angle in VFS blue phase LCDs.In Chapter 4, we propose several compensation mechanisms to improve the viewing angle of VFS blue-phase LCDs. The compensation principles are analyzed and simulation results evaluated. Because VFS blue-phase LCD processes several advantages over IPS blue-phase LCD and conventional LCDs, it could become a strong contender for next-generation display technology.
Show less
Date Issued: 2012
Identifier: CFE0004780, ucf:49772
Format: Document (PDF)
PURL: http://purl.flvc.org/ucf/fd/CFE0004780

liquid crystal display (5)	+ -
blue phase (3)	+ -
display (3)	+ -
fast response (3)	+ -
liquid crystal (3)	+ -

Liquid crystal (2)	+ -
blue phase liquid crystal (2)	+ -
contrast ratio (2)	+ -
liquid crystal displays (2)	+ -
liquid crystals (2)	+ -
low voltage (2)	+ -
optics (2)	+ -
3D display (1)	+ -
Adaptive lens (1)	+ -
Blue phase (1)	+ -
Brag reflection (1)	+ -
Display (1)	+ -
Displays (1)	+ -
Kerr constant (1)	+ -
Liquid crystal display (1)	+ -
Liquid crystals (1)	+ -
Liquid-crystal devices (1)	+ -
MWIR (1)	+ -
Optical fluid (1)	+ -
adaptive lens (1)	+ -
beam steering (1)	+ -
birefringence (1)	+ -
bit depth (1)	+ -
blue phase liquid crystal (BPLC) (1)	+ -
circular polarizer. (1)	+ -

University of Central Florida (17)	+ -
Wu, Shintson (13)	+ -
Fang, Jiyu (6)	+ -
Likamwa, Patrick (6)	+ -
Moharam, Jim (5)	+ -

Zeldovich, Boris (5)	+ -
Schoenfeld, Winston (4)	+ -
Wu, Shin-Tson (4)	+ -
Wu, Xinzhang (4)	+ -
Dong, Yajie (2)	+ -
Kik, Pieter (2)	+ -
Chen, Haiwei (1)	+ -
Chen, Yuan (1)	+ -
Cheng, Hui-Chuan (1)	+ -
Ge, Zhibing (1)	+ -
Hong, Qi (1)	+ -
Lee, Yun Han (1)	+ -
Li, Guifang (1)	+ -
Li, Jun (1)	+ -
Li, Yan (1)	+ -
Liu, Yifan (1)	+ -
Luo, Zhenyue (1)	+ -
Moharam, M. (1)	+ -
Peng, Fenglin (1)	+ -
Rao, Linghui (1)	+ -
Saleh, Bahaa (1)	+ -
Vanstryland, Eric (1)	+ -
Xu, Daming (1)	+ -
Xu, Su (1)	+ -
Yan, Jin (1)	+ -

Search In

Sort Results By:

Narrow results by:

Topical Subject

Collection

Type of Resource

Language

Creator

Format

Owner