Current Search:  maximum power point tracking (x)

View All Items

  • CSV Spreadsheet
(1 - 4 of 4)
ANALYSIS AND DESIGN OF A MODULAR SOLAR-FED FAULT-TOLERANT POWER SYSTEM WITH MAXIMUM POWER POINT TRACKING
Title
ANALYSIS AND DESIGN OF A MODULAR SOLAR-FED FAULT-TOLERANT POWER SYSTEM WITH MAXIMUM POWER POINT TRACKING.
Creator
Al-Atrash, Hussam, Batarseh, Issa, University of Central Florida
Abstract / Description
Solar power is becoming ever more popular in a variety of applications. It is particularly attractive because of its abundance, renewability, and environment friendliness. Solar powered spacecraft systems have ever-expanding loads with stringent power regulation specifications. Moreover, they require a light and compact design of their power system. These constraints make the optimization of power harvest from solar arrays a critical task. Florida Power Electronics Center (FPEC) at UCF set to...
Show moreSolar power is becoming ever more popular in a variety of applications. It is particularly attractive because of its abundance, renewability, and environment friendliness. Solar powered spacecraft systems have ever-expanding loads with stringent power regulation specifications. Moreover, they require a light and compact design of their power system. These constraints make the optimization of power harvest from solar arrays a critical task. Florida Power Electronics Center (FPEC) at UCF set to develop a modular fault-tolerant power system architecture for space applications. This architecture provides a number of very attractive features including Maximum Power Point Tracking (MPPT) and uniform power stress distribution across the system. MPPT is a control technique that leads the system to operate its solar sources at the point where they provide maximum power. This point constantly moves following changes in ambient operating conditions. A digital controller is setup to locate it in real time while optimizing other operating parameters. This control scheme can increase the energy yield of the system by up to 45%, and thus significantly reduces the size and weight of the designed system. The modularity of the system makes it easy to prototype and expand. It boosts its reliability and allows on-line reconfiguration and maintenance, thus reducing down-time upon faults. This thesis targets the analysis and optimization of this architecture. A new modeling technique is introduced for MPPT in practical environments, and a novel digital power stress distribution scheme is proposed in order to properly distribute peak and thermal stress and improve reliability. A 2kW four-channel prototype of the system was built and tested. Experimental results confirm the theoretical improvements, and promise great success in the field.
Show less
Date Issued
2005
Identifier
CFE0000469, ucf:46357
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0000469
REALIZATION OF POWER FACTOR CORRECTION AND MAXIMUM POWER POINT TRACKING FOR LOW POWER WIND TURBINES
Title
REALIZATION OF POWER FACTOR CORRECTION AND MAXIMUM POWER POINT TRACKING FOR LOW POWER WIND TURBINES.
Creator
Gamboa, Gustavo, Batarseh, Issa, University of Central Florida
Abstract / Description
In recent years, wind energy technology has become one of the top areas of interest for energy harvesting in the power electronics world. This interest has especially peaked recently due to the increasing demand for a reliable source of renewable energy. In a recent study, the American Wind Energy Association (AWEA) ranked the U.S as the leading competitor in wind energy harvesting followed by Germany and Spain. Although the United States is the leading competitor in this area, no one has...
Show moreIn recent years, wind energy technology has become one of the top areas of interest for energy harvesting in the power electronics world. This interest has especially peaked recently due to the increasing demand for a reliable source of renewable energy. In a recent study, the American Wind Energy Association (AWEA) ranked the U.S as the leading competitor in wind energy harvesting followed by Germany and Spain. Although the United States is the leading competitor in this area, no one has been able successfully develop an efficient, low-cost AC/DC convertor for low power turbines to be used by the average American consumer. There has been very little research in low power AC/DC converters for low to medium power wind energy turbines for battery charging applications. Due to the low power coefficient of wind turbines, power converters are required to transfer the maximum available power at the highest efficiency. Power factor correction (PFC) and maximum power point tracking (MPPT) algorithms have been proposed for high power wind turbines. These turbines are out of the price range of what a common household can afford. They also occupy a large amount of space, which is not practical for use in one's home. A low cost AC/DC converter with efficient power transfer is needed in order to promote the use of cheaper low power wind turbines. Only MPPT is implemented in most of these low power wind turbine power converters. The concept of power factor correction with MPPT has not been completely adapted just yet. The research conducted involved analyzing the effect of power factor correction and maximum power point tracking algorithm in AC/DC converters for wind turbine applications. Although maximum power to the load is always desired, most converters only take electrical efficiency into consideration. However, not only the electrical efficiency must be considered, but the mechanical energy as well. If the converter is designed to look like a purely resistive load and not a switched load, a wind turbine is able to supply the maximum power with lower conduction loss at the input side due to high current spikes. Two power converters, VIENNA with buck converter and a Buck-boost converter, were designed and experimentally analyzed. A unique approach of controlling the MPPT algorithm through a conductance G for PFC is proposed and applied in the VIENNA topology. On the other hand, the Buck-boost only operates MPPT. With the same wind profile applied for both converters, an increase in power drawn from the input increased when PFC was used even when the power level was low. Both topologies present their own unique advantages. The main advantage for the VIENNA converter is that PFC allowed more power extraction from the turbine, increasing both electrical and mechanical efficiency. The buck-boost converter, on the other hand, presents a very low component count which decreases the overall cost and volume. Therefore, a small, cost-effective converter that maximizes the power transfer from a small power wind turbine to a DC load, can motivate consumers to utilize the power available from the wind.
Show less
Date Issued
2009
Identifier
CFE0002730, ucf:48158
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0002730
MAXIMUM ENERGY HARVESTING CONTROL FOROSCILLATING ENERGY HARVESTING SYSTEMS
Title
MAXIMUM ENERGY HARVESTING CONTROL FOROSCILLATING ENERGY HARVESTING SYSTEMS.
Creator
Elmes, John, Batarseh, Issa, University of Central Florida
Abstract / Description
This thesis presents an optimal method of designing and controlling an oscillating energy harvesting system. Many new and emerging energy harvesting systems, such as the energy harvesting backpack and ocean wave energy harvesting, capture energy normally expelled through mechanical interactions. Often the nature of the system indicates slow system time constants and unsteady AC voltages. This paper reveals a method for achieving maximum energy harvesting from such sources with fast...
Show moreThis thesis presents an optimal method of designing and controlling an oscillating energy harvesting system. Many new and emerging energy harvesting systems, such as the energy harvesting backpack and ocean wave energy harvesting, capture energy normally expelled through mechanical interactions. Often the nature of the system indicates slow system time constants and unsteady AC voltages. This paper reveals a method for achieving maximum energy harvesting from such sources with fast determination of the optimal operating condition. An energy harvesting backpack, which captures energy from the interaction between the user and the spring decoupled load, is presented in this paper. The new control strategy, maximum energy harvesting control (MEHC), is developed and applied to the energy harvesting backpack system to evaluate the improvement of the MEHC over the basic maximum power point tracking algorithm.
Show less
Date Issued
2007
Identifier
CFE0001822, ucf:47345
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0001822
CONTROL STRATEGY FOR MAXIMIZING POWER CONVERSION EFFICIENCY AND EFFECTIVENESS OF THREE PORT SOLAR CHARGING STATION FOR ELECTRIC VEHICLES
Title
CONTROL STRATEGY FOR MAXIMIZING POWER CONVERSION EFFICIENCY AND EFFECTIVENESS OF THREE PORT SOLAR CHARGING STATION FOR ELECTRIC VEHICLES.
Creator
Hamilton, Christopher, Batarseh, Issa, University of Central Florida
Abstract / Description
Recent trends in the energy sector have provided opportunities in the research of alternative energy sources and optimization of systems that harness these energy sources. With the rising cost of fossil fuel and rising concern about detrimental effects that fossil fuel consumption has on the environment, electric vehicles are becoming more prevalent. A study put out in 2009 gives a prediction that in the year 2025, 20% of new vehicles will be PHEVs. As energy providers become more concerned...
Show moreRecent trends in the energy sector have provided opportunities in the research of alternative energy sources and optimization of systems that harness these energy sources. With the rising cost of fossil fuel and rising concern about detrimental effects that fossil fuel consumption has on the environment, electric vehicles are becoming more prevalent. A study put out in 2009 gives a prediction that in the year 2025, 20% of new vehicles will be PHEVs. As energy providers become more concerned about a growing population and diminishing energy source, they are looking into alternative energy sources such as wind and solar power. Much of this is done on a large scale with vast amounts of land used for solar or wind farms to provide energy to the grid. However, as population grows, requirements of the physical components of a power transmission system will become more demanding and the need for remote micro-grids will become more prevalent. Micro-grids are essentially smaller subsystems of a distribution system that provide power to a confined group of loads, or households. Using the idea of micro grid technology, a solar charging station can be used as a source to provide energy for the immediate surroundings, or also to electric vehicles that are demanding energy from the panels. Solar charging stations are becoming very popular, however the need for improvement and optimization of these systems is needed. This thesis will present a method for redesigning the overall architecture of the controls and power electronics of typical carports so that efficiency, reliability and modularity are achieved. Specifically, a typical carport, as seen commonly today, has been built on the University of Central Florida campus in Orlando. This carport was designed in such a way that shifting from conventional charging methods is made easy while preserving the fundamental requirements of a practical solar carport.
Show less
Date Issued
2010
Identifier
CFE0003490, ucf:48954
Format
Document (PDF)
PURL
http://purl.flvc.org/ucf/fd/CFE0003490