Current Search: piezoelectric (x)
View All Items
- Title
- EFFECTS OF RELAXED ASSUMPTIONS ON THE STATE SWITCHING TECHNIQUE.
- Creator
-
Ilardi, Stephen, Kauffman, Jeffrey, University of Central Florida
- Abstract / Description
-
This thesis explores the effects of two assumptions commonly used in mathematical models related to a piezoelectric damping method known as State Switching. The technique relies on changing the stiffness state of a piezoelectric patch through control of the electrical boundary conditions. The transition between stiffness states is assumed to occur instantaneously and in concurrence with the switch event. In actuality, the transition will occur over a finite time and will trail behind the...
Show moreThis thesis explores the effects of two assumptions commonly used in mathematical models related to a piezoelectric damping method known as State Switching. The technique relies on changing the stiffness state of a piezoelectric patch through control of the electrical boundary conditions. The transition between stiffness states is assumed to occur instantaneously and in concurrence with the switch event. In actuality, the transition will occur over a finite time and will trail behind the switch event by a finite time. For these assumptions to be valid, the effects of switch duration and delay on the performance of the State Switching method must be examined. In this thesis, the vibration reduction for various switch duration/delay values will be calculated using a numerical solver. The results of the simulations will be used to provide a range in which the two aforementioned assumptions produce negligible error, defined here as a 10% decrease in method performance.
Show less - Date Issued
- 2014
- Identifier
- CFH0004658, ucf:45288
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFH0004658
- Title
- ANALOG TEMPERATURE CONTROL CIRCUIT FOR A THIN-FILM PIEZOELECTRIC-ON-SUBSTRATE MICROELECTROMECHANICAL SYSTEMS OSCILLATOR.
- Creator
-
Hofstee, Heather, Abdolvand, Reza, University of Central Florida
- Abstract / Description
-
The objective and motivation for this project is to design a low-power, low-noise oven-control circuit to optimize the stability of a MEMS oscillator. MEMS oscillators can be fabricated using conventional semiconductor manufacturing methods and can often be assembled in packages smaller than those of traditional crystal oscillators. However, one of their largest disadvantages currently is their high temperature coefficient of frequency (TCF), causing MEMS oscillators to be especially...
Show moreThe objective and motivation for this project is to design a low-power, low-noise oven-control circuit to optimize the stability of a MEMS oscillator. MEMS oscillators can be fabricated using conventional semiconductor manufacturing methods and can often be assembled in packages smaller than those of traditional crystal oscillators. However, one of their largest disadvantages currently is their high temperature coefficient of frequency (TCF), causing MEMS oscillators to be especially sensitive to temperature changes. Hence, this project focuses on designing a printed circuit board that will allow the user to manually tune a current passing through a resonator wire-bonded to the board to elevate the resonator temperature. This will ensure that the device's resonance frequency stays largely constant and that the oscillator provides a very stable signal.
Show less - Date Issued
- 2018
- Identifier
- CFH2000419, ucf:45748
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFH2000419
- Title
- SMART MATERIAL ACTUATION AND MORPHING FOR UNMANNED AIRCRAFT SYSTEMS.
- Creator
-
Da Silva Lima, Caio H, Kauffman, Jeffrey L., University of Central Florida
- Abstract / Description
-
The intent of this thesis is to outline the design, analysis, and characterization of an axially compressed piezocomposite actuator and, in particular, to determine the correlation and accuracy of two models used to predict deflection of an axially compressed piezocomposite bimorph. Restrictions in material properties lead to vehicle inefficiencies caused by the discontinuous geometry of deflected control surfaces in unmanned aircraft systems. This performance disadvantage in discrete control...
Show moreThe intent of this thesis is to outline the design, analysis, and characterization of an axially compressed piezocomposite actuator and, in particular, to determine the correlation and accuracy of two models used to predict deflection of an axially compressed piezocomposite bimorph. Restrictions in material properties lead to vehicle inefficiencies caused by the discontinuous geometry of deflected control surfaces in unmanned aircraft systems. This performance disadvantage in discrete control surfaces is caused in part by the sharp edges that are formed when the surface is pivoted. Flow continuity over the body of a vehicle is important in minimizing the effects of drag and, in turn, increasing aerodynamic performance. An efficient alternative to discrete control surface actuation is axially compressed piezocomposite actuation which could potentially improve the efficiency of the vehicle in all environments. Bimorph performance in angular deflection and displacement for the PA16N and MFC-M8528-P1 piezocomposites is analyzed using a Classical Laminate Plate Theory (CLPT) model and an Elastica model. Model accuracy is verified through experimental testing of a PA16N bimorph. CLPT model is shown to be accurate to within .05 mm and Elastica model is shown to be accurate to within .04 mm for axial forces below 30 N. Correlation between the mathematical models is confirmed. Experimental results for the PA16N show that a 30 N compression force applied to the bimorph can increase the maximum displacement by approximately 2.5 times the original displacement.
Show less - Date Issued
- 2016
- Identifier
- CFH2000095, ucf:45563
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFH2000095
- Title
- Design and Implementation of Silicon-Based MEMS Resonators for Application in Ultra Stable High Frequency Oscillators.
- Creator
-
Shahraini, Sarah, Abdolvand, Reza, Gong, Xun, Sundaram, Kalpathy, Kapoor, Vikram, Rajaraman, Swaminathan, University of Central Florida
- Abstract / Description
-
The focus of this work is to design and implement resonators for ultra-stable high-frequency ((>)100MHz) silicon-based MEMS oscillators. Specifically, two novel types of resonators are introduced that push the performance of silicon-based MEMS resonators to new limits. Thin film Piezoelectric-on-Silicon (TPoS) resonators have been shown to be suitable for oscillator applications due to their combined high quality factor, coupling efficiency, power handling and doping-dependent temperature...
Show moreThe focus of this work is to design and implement resonators for ultra-stable high-frequency ((>)100MHz) silicon-based MEMS oscillators. Specifically, two novel types of resonators are introduced that push the performance of silicon-based MEMS resonators to new limits. Thin film Piezoelectric-on-Silicon (TPoS) resonators have been shown to be suitable for oscillator applications due to their combined high quality factor, coupling efficiency, power handling and doping-dependent temperature-frequency behavior. This thesis is an attempt to utilize the TPoS platform and optimize it for extremely stable high-frequency oscillator applications.To achieve the said objective, two main research venues are explored. Firstly, quality factor is systematically studied and anisotropy of single crystalline silicon (SCS) is exploited to enable high-quality factor side-supported radial-mode (aka breathing mode) TPoS disc resonators through minimization of anchor-loss. It is then experimentally demonstrated that in TPoS disc resonators with tethers aligned to [100], unloaded quality factor improves from ~450 for the second harmonic mode at 43 MHz to ~11,500 for the eighth harmonic mode at 196 MHz. Secondly, thickness quasi-Lam(&)#233; modes are studied and demonstrated in TPoS resonators for the first time. It is shown that thickness quasi-Lam(&)#233; modes (TQLM) could be efficiently excited in silicon with very high quality factor (Q). A quality factor of 23.2 k is measured in vacuum at 185 MHz for a fundamental TQLM-TPoS resonators designed within a circular acoustic isolation frame. Quality factor of 12.6 k and 6 k are also measured for the second- and third- harmonic TQLM TPoS resonators at 366 MHz and 555 MHz respectively. Turn-over temperatures between 40 (&)deg;C to 125 (&)deg;C are also designed and measured for TQLM TPoS resonators fabricated on degenerately N-doped silicon substrates. The reported extremely high quality factor, very low motional resistance, and tunable turn-over temperatures (>)80 (&)#186;C make these resonators a great candidate for ultra-stable oven-controlled high-frequency MEMS oscillators.
Show less - Date Issued
- 2019
- Identifier
- CFE0007861, ucf:52775
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0007861
- Title
- Wearable Passive Wireless MEMS Respiration Sensor.
- Creator
-
Moradian, Sina, Abdolvand, Reza, Sundaram, Kalpathy, Kapoor, Vikram, University of Central Florida
- Abstract / Description
-
In this study a passive sensor that wirelessly monitors the profile of the human respiratory system is presented. The sensor was designed to be wearable, weighs less than 10 grams and is durable. The sensor is made of a RF piezoelectric MEMS resonator and an ultra-high frequency antenna made of a thin metal film formed on a flexible substrate . The resonance frequency of the TPoS resonator shifts as a function of condensation and evaporation of water vapor on the surface of the resonator and...
Show moreIn this study a passive sensor that wirelessly monitors the profile of the human respiratory system is presented. The sensor was designed to be wearable, weighs less than 10 grams and is durable. The sensor is made of a RF piezoelectric MEMS resonator and an ultra-high frequency antenna made of a thin metal film formed on a flexible substrate . The resonance frequency of the TPoS resonator shifts as a function of condensation and evaporation of water vapor on the surface of the resonator and changes in resonator's temperature. These parameters change in each in response to inspiration and expiration and a wireless measurement system detects the frequency shift of the sensor and converts it into the respiration profile. The respiration profile of a healthy human subject is measured and presented for a transmitter to sensor to receiver distance of ~25cm.
Show less - Date Issued
- 2017
- Identifier
- CFE0006628, ucf:51279
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0006628
- Title
- Determination of Frequency-Based Switch Triggers for Optimal Vibration Reduction via Resonance Frequency Detuning.
- Creator
-
Lopp, Garrett, Kauffman, Jeffrey, Das, Tuhin, Xu, Yunjun, University of Central Florida
- Abstract / Description
-
Resonance frequency detuning (RFD) is a piezoelectric-based vibration reduction approach that applies to systems experiencing transient excitation through the system's resonance(-)for example, turbomachinery experiencing changes in rotation speed, such as on spool-up and spool-down. This technique relies on the inclusion of piezoelectric material and manipulation of its electrical boundary conditions, which control the stiffness of the piezoelectric material. Resonance frequency detuning...
Show moreResonance frequency detuning (RFD) is a piezoelectric-based vibration reduction approach that applies to systems experiencing transient excitation through the system's resonance(-)for example, turbomachinery experiencing changes in rotation speed, such as on spool-up and spool-down. This technique relies on the inclusion of piezoelectric material and manipulation of its electrical boundary conditions, which control the stiffness of the piezoelectric material. Resonance frequency detuning exploits this effect by intelligently switching between the open-circuit (high stiffness) and short-circuit (low stiffness) conditions as the excitation approaches resonance, subsequently shifting the natural frequency to avoid this resonance crossing and limit the response. The peak response dynamics are then determined by the system's sweep rate, modal damping ratio, electromechanical coupling coefficient, and, most importantly, the trigger (represented here in terms of excitation frequency) that initiates the stiffness state switch. This thesis identifies the optimal frequency-based switch trigger over a range of sweep rates, damping ratios, and electromechanical coupling coefficients. With perfect knowledge of the system, the optimal frequency-based switch trigger decreases approximately linearly with the square of the coupling coefficient. Furthermore, phase of vibration at the time of the switch has a very small effect; switching on peak strain energy is marginally optimal. In practice, perfect knowledge is unrealistic and an alternate switch trigger based on an easily measurable parameter is necessary. As such, this thesis also investigates potential methods using the open-circuit piezoelectric voltage response envelope and its derivatives. The optimal switch triggers collapse to a near linear trend when measured against the response envelope derivatives and, subsequently, an empirical control law is extracted. This control law agrees well with and produces a comparable response to that of the optimal control determined using perfect and complete knowledge of the system.
Show less - Date Issued
- 2015
- Identifier
- CFE0005829, ucf:50909
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0005829
- Title
- FILM GROWTH OF NOVEL FREQUENCY AGILE COMPLEX-OXIDE PIEZOELECTRIC MATERIAL.
- Creator
-
Sreeramakavacham, Bindu, Klemenz, Christine, University of Central Florida
- Abstract / Description
-
Piezoelectric materials are well known for their applications in surface (SAW) and bulk acoustic wave (BAW) devices such as oscillators, resonators and sensors. Quartz has been the main material used in such applications. Ternary calcium gallium germanate (CGG) structure-type materials, so-called langasites, recently emerged as very promising because of their piezoelectric properties superior to quartz. This thesis discusses the growth of langasite-type La3Ga5.5Ta0.5O14 (LGT) films by liquid...
Show morePiezoelectric materials are well known for their applications in surface (SAW) and bulk acoustic wave (BAW) devices such as oscillators, resonators and sensors. Quartz has been the main material used in such applications. Ternary calcium gallium germanate (CGG) structure-type materials, so-called langasites, recently emerged as very promising because of their piezoelectric properties superior to quartz. This thesis discusses the growth of langasite-type La3Ga5.5Ta0.5O14 (LGT) films by liquid phase epitaxy (LPE) technique and their chemical and structural characterization. In addition, the different techniques suitable for the growth of LGT are discussed and compared. To adjust the materials properties for given applications, doping by selected ions can be used. However, the dopants must be homogeneously distributed. In the current study, Al, Ti, Cr and Ca were investigated as dopants. In an earlier study, Al and Ti had been chosen because of their ability to substitute the octahedral site of LGT, normally occupied by Ga (CN=VI) with a segregation coefficient near unity in Czochralski growth. Doping with Ca and Cr has never been reported before, and therefore, the segregation behavior was unknown. In this study, Al, Ti and co-doping with Cr and Ca has been investigated for both X and Y-oriented films. The dopant distribution in the films was quantitatively evaluated by Secondary Ion Mass Spectroscopy (SIMS), using ion-implanted LGT substrates as standards. The drop of dopant concentration, in the SIMS profile, allows for the identification of the film-substrate interface and to accurately measure the thickness of the films. The film thickness is found to be typically of the order 0.5 to 2µm, depending on growth conditions. The solvent was found a reliable choice, as solvent ions were not incorporated in the films above the detection limits of the characterization techniques. A lead oxide solvent system is used as a solvent for the growth of LGT LPE films with different orientations. Extensive structural characterization was performed. The crystallinity of substrates and films grown with different orientations was compared by X-ray diffraction (XRD). The films show a very high structural perfection, with typically FWHM values of 0.035 for the (004) reflection of the XRD rocking curve. The films were also characterized by TEM. The optical transmittance of the films was characterized by Varian optical spectrophotometer, and the value obtained of approximately 80% is comparable with the transmittance value of the Czochralski grown polished substrate.
Show less - Date Issued
- 2007
- Identifier
- CFE0001772, ucf:47284
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0001772
- Title
- FINITE ELEMENT SIMULATION OF REPAIR OF DELAMINATED COMPOSITE STRUCTURES USING PIEZOELECTRIC LAYERS.
- Creator
-
Navale, Kunal, Wang, Quan, University of Central Florida
- Abstract / Description
-
Damage in composite material fabricated aerospace, aeronautical, mechanical, civil and offshore structures often results from factors such as fatigue, corrosion and accidents. Such damage when left unattended can grow at an alarming rate due to the singularity of the stress and strain in the vicinity of the damage. It can lead to increase in the vibration level, reduction in the load carrying capacity, deterioration in the normal performance of the component and even catastrophic failure. In...
Show moreDamage in composite material fabricated aerospace, aeronautical, mechanical, civil and offshore structures often results from factors such as fatigue, corrosion and accidents. Such damage when left unattended can grow at an alarming rate due to the singularity of the stress and strain in the vicinity of the damage. It can lead to increase in the vibration level, reduction in the load carrying capacity, deterioration in the normal performance of the component and even catastrophic failure. In most conditions, the service life of damaged components is extended with repair instead of immediate replacement. Effective repair of structural damage is therefore an important and practical topic. Repair can extend the service life and can be a cost efficient alternative to immediate replacement of the damaged component. Most conventional repair methods involve welding, riveting or mounting additional patches on the parent structure without removing the damaged portion. These methods tend to be passive and inflexible, faced with the limitations of adjusting the repair to the changes in external loads.Besides, in certain cases these methods may lead to additional damage to the structure. For example, the in-situ drilling required in some cases can cause damage to items such as hidden or exposed hydraulic lines and electrical cables. Welding or bonding patches can cause significant stress alterations and serious stress corrosion problems, apart from burdening the weight sensitive structures. Above all, effective repair applying conventional analytical methods hinges on calculation of the singularity of stress and strain in the vicinity of the damage, which is be a difficult as only approximate solutions are available. Thus, a need is felt to update the repair methods with the advancement in fields of materials, sensing and actuating. This can make the repair more effective and efficient than conventional repair methodology. Current research proposes the use of piezoelectric materials in repair of delaminated composite structures. A detailed mechanics analysis of the delaminated beams, subjected to concentrated static loads and axial compressive loads, is presented. The discontinuity of shear stresses induced at delamination tips due to bending of the beams, under action of concentrated static load and axially compressive load, is studied. This discontinuity of the shear stresses normally leads to the sliding mode of fracture of the beam structures. In order to ensure proper functioning of these beam structures, electromechanical characteristics of piezoelectric materials are employed for their repair. Numerical simulations are conducted to calculate the repair voltage to be applied to the piezoelectric patches to erase the discontinuity of horizontal shear stress at the delamination tips and thus, render the beam repaired. The variation of repair voltage with location and size of the delamination is considered. FE simulations are performed to validate the numerically calculated voltage values. The research presented serves to provide information on the design of piezoelectric materials for the repair of delaminated composite structures.
Show less - Date Issued
- 2005
- Identifier
- CFE0000873, ucf:46662
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0000873
- Title
- STRUCTURAL ANALYSIS AND ACTIVE VIBRATION CONTROL OF TETRAFORM SPACE FRAME FOR USE IN MICRO-SCALE MACHINING.
- Creator
-
Knipe, Kevin, Xu, Chengying, University of Central Florida
- Abstract / Description
-
This research thesis aims to achieve the structural analysis and active vibration damping of the Tetraform machining structure. The Tetraform is a space frame made up of four equilateral triangles with spherical masses at the four vertices. This frame was originally developed for grinding of optical lenses and is now being adapted for use in micro-precision milling. The Tetraform is beneficial to the milling process due to its exceptionally high dynamic stiffness characteristics, which...
Show moreThis research thesis aims to achieve the structural analysis and active vibration damping of the Tetraform machining structure. The Tetraform is a space frame made up of four equilateral triangles with spherical masses at the four vertices. This frame was originally developed for grinding of optical lenses and is now being adapted for use in micro-precision milling. The Tetraform is beneficial to the milling process due to its exceptionally high dynamic stiffness characteristics, which increases the machining stability and allows for higher material removal rates and accuracy. However, there are still some modes of vibration that are critical to the milling process and need to be dampened out. Under operating conditions of many structures, resonant modes of vibration can easily be excited which often lead to structural failure or significant reduction in operating performance. For the milling application, resonant frequencies of the machining structure can severely limit the milling process. The goal of the presented research is to increase surface and subsurface integrity with optimal material removal rate and least possible machining vibration, while maintaining accurate precision and surface finish. The vibrations from the machine tool not only affect the quality of the machined part but also the machine tool itself, since the cutting tool is susceptible to break or wear quickly when operating at high vibration modes, thus inevitably decreasing tool life. Vibration control has gained considerable attention in many areas including aerospace, automotive, structural, and manufacturing. Positive Position Feedback (PPF) is a vibration control scheme that is commonly used for its robust stability properties. A PPF controller works as a low pass filter, eliminating instability from unmodeled higher-frequency modes. The PPF controller concept is used in developing an active vibration control scheme to target the critical frequencies of the Tetraform. The controller is implemented with use of piezoelectric actuators and sensors, where the sensors are bonded to the opposing sides of the beams as the actuators, allowing for the assumption of collocation. The sensor/actuator pairs are placed at an optimal location on the Tetraform with high modal displacements for all the critical frequencies. Multiple finite element models are developed in order to analyze the structural dynamics and allow for controller design. A model is developed in the finite element software ANSYS and is used to obtain the Tetraform's dynamic characteristics, which include natural frequencies and mode shapes. This model is also used to visualize the changes in mode shapes due to structural modifications or different material selections. Other models are also developed in Matlab and Simulink. This consists of the creation of a finite element model which is then converted to state space. The piezoelectric transducers are included in this model for the input and output of the state space model. This model can be used for controller design where the goal is to create maximum decibel reduction at critical frequencies while attempting to minimize controller effort.
Show less - Date Issued
- 2009
- Identifier
- CFE0002962, ucf:47976
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0002962
- Title
- Energy Harvesting toward the Vibration Reduction of Turbomachinery Blades via Resonance Frequency Detuning.
- Creator
-
Hynds, Taylor, Kauffman, Jeffrey, Das, Tuhin, Raghavan, Seetha, University of Central Florida
- Abstract / Description
-
Piezoelectric-based energy harvesting devices provide an attractive approach to powering remote devices as ambient mechanical energy from vibrations is converted to electrical energy. These devices have numerous potential applications, including actuation, sensing, structural health monitoring, and vibration control -- the latter of which is of particular interest here. This work seeks to develop an understanding of energy harvesting behavior within the framework of a semi-active technique...
Show morePiezoelectric-based energy harvesting devices provide an attractive approach to powering remote devices as ambient mechanical energy from vibrations is converted to electrical energy. These devices have numerous potential applications, including actuation, sensing, structural health monitoring, and vibration control -- the latter of which is of particular interest here. This work seeks to develop an understanding of energy harvesting behavior within the framework of a semi-active technique for reducing turbomachinery blade vibrations, namely resonance frequency detuning. In contrast with the bulk of energy harvesting research, this effort is not focused on maximizing the power output of the system, but rather providing the low power levels required by resonance frequency detuning. The demands of this technique dictate that harvesting conditions will be far from optimal, requiring that many common assumptions in conventional energy harvesting research be relaxed.Resonance frequency detuning has been proposed as a result of recent advances in turbomachinery blade design that have, while improving their overall efficiency, led to significantly reduced damping and thus large vibratory stresses. This technique uses piezoelectric materials to control the stiffness, and thus resonance frequency, of a blade as the excitation frequency sweeps through resonance. By detuning a structure's resonance frequency from that of the excitation, the overall peak response can be reduced, delaying high cycle fatigue and extending the lifetime of a blade. Additional benefits include reduced weight, drag, and noise levels as reduced vibratory stresses allow for increasingly light blade construction.As resonance frequency detuning is most effective when the stiffness states are well separated, it is necessary to harvested at nominally open- and short-circuit states, corresponding to the largest separation in stiffness states. This presents a problem from a harvesting standpoint however, as open- and short-circuit correspond to zero charge displacement and zero voltage, respectively, and thus there is no energy flow. It is, then, desirable to operate as near these conditions as possible while still harvesting sufficient energy to provide the power for state-switching. In this research a metric is developed to study the relationship between harvested power and structural stiffness, and a key result is that appreciable energy can be harvested far from the usual optimal conditions in a typical energy harvesting approach. Indeed, sufficient energy is available to power the on-blade control while essentially maintaining the desired stiffness states for detuning. Furthermore, it is shown that the optimal switch in the control law for resonance frequency detuning may be triggered by a threshold harvested power, requiring minimal on-blade processing. This is an attractive idea for implementing a vibration control system on-blade, as size limitations encourage removing the need for additional sensing and signal processing hardware.
Show less - Date Issued
- 2015
- Identifier
- CFE0005811, ucf:50039
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0005811
- Title
- Vibration Reduction of Mistuned Bladed Disks via Piezoelectric-Based Resonance Frequency Detuning.
- Creator
-
Lopp, Garrett, Kauffman, Jeffrey L., Das, Tuhin, Xu, Yunjun, University of Central Florida
- Abstract / Description
-
Recent trends in turbomachinery blade technology have led to increased use of monolithically constructed bladed disks (blisks). Although offering a wealth of performance benefits, this construction removes the blade-attachment interface present in the conventional design, thus unintentionally removing a source of friction-based damping needed to counteract large vibrations during resonance passages. This issue is further exacerbated in the presence of blade mistuning that arises from small...
Show moreRecent trends in turbomachinery blade technology have led to increased use of monolithically constructed bladed disks (blisks). Although offering a wealth of performance benefits, this construction removes the blade-attachment interface present in the conventional design, thus unintentionally removing a source of friction-based damping needed to counteract large vibrations during resonance passages. This issue is further exacerbated in the presence of blade mistuning that arises from small imperfections from otherwise identical blades and are unavoidable as they originate from manufacturing tolerances and operational wear over the lifespan of the engine. Mistuning is known to induce vibration localization with large vibration amplitudes that render blades susceptible to failure induced by high-cycle fatigue. The resonance frequency detuning (RFD) method reduces vibration associated with resonance crossings by selectively altering the blades' structural response. This method utilizes the variable stiffness properties of piezoelectric materials to switch between available stiffness states at some optimal time as the excitation frequency sweeps through a resonance. For a single-degree-of-freedom (SDOF) system, RFD performance is well defined. This research provides the framework to extend RFD to more realistic applications when the SDOF assumption breaks down, such as in cases of blade mistuning. Mistuning is inherently random; thus, a Monte Carlo analysis performed on a computationally cheap lumped-parameter model provides insight into RFD performance for various test parameters. Application of a genetic algorithm reduces the computational expense required to identify the optimal set of stiffness-state switches. This research also develops a low-order blisk model with blade-mounted piezoelectric patches as a tractable first step to apply RFD to more realistic systems. Application of a multi-objective optimization algorithm produces Pareto fronts that aid in the selection of the optimized patch parameters. Experimental tests utilizing the academic blisk with the optimized patches provides validation.
Show less - Date Issued
- 2018
- Identifier
- CFE0007488, ucf:52639
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0007488
- Title
- Performance optimization of lateral-mode thin-film piezoelectric-on-substrate resonant systems.
- Creator
-
Fatemi, Hedy, Abdolvand, Reza, Sundaram, Kalpathy, Malocha, Donald, Gong, Xun, Cho, Hyoung Jin, University of Central Florida
- Abstract / Description
-
The main focus of this dissertation is to characterize and improve the performance of thin-film piezoelectric-on-substrate (TPoS) lateral-mode resonators and filters. TPoS is a class of piezoelectric MEMS devices which benefits from the high coupling coefficient of the piezoelectric transduction mechanism while taking advantage of superior acoustic properties of a substrate. The use of lateral-mode TPoS designs allows for fabrication of dispersed-frequency filters on a single substrate, thus...
Show moreThe main focus of this dissertation is to characterize and improve the performance of thin-film piezoelectric-on-substrate (TPoS) lateral-mode resonators and filters. TPoS is a class of piezoelectric MEMS devices which benefits from the high coupling coefficient of the piezoelectric transduction mechanism while taking advantage of superior acoustic properties of a substrate. The use of lateral-mode TPoS designs allows for fabrication of dispersed-frequency filters on a single substrate, thus significantly reducing the size and manufacturing cost of devices. TPoS filters also offer a lower temperature coefficient of frequency, and better power handling capability compared to rival technologies all in a very small footprint.Design and fabrication process of the TPoS devices is discussed. Both silicon and diamond substrates are utilized for fabrication of TPoS devices and results are compared. Specifically, the superior acoustic properties of nanocrystalline diamond in scaling the frequency and energy density of the resonators is highlighted in comparison with silicon. The performance of TPoS devices in a variety of applications is reported. These applications include lateral-mode TPoS filters with record low IL values (as low as 2dB) and fractional bandwidth up to 1%, impedance transformers, very low phase noise oscillators, and passive wireless temperature sensors.
Show less - Date Issued
- 2015
- Identifier
- CFE0005945, ucf:50805
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0005945
- Title
- Optimal Switch Timing for Piezoelectric-Based Semi-Active Vibration Reduction Techniques.
- Creator
-
Kelley, Christopher, Kauffman, Jeffrey, Das, Tuhin, Xu, Yunjun, University of Central Florida
- Abstract / Description
-
Semi-active vibration reduction techniques switch a piezoelectric transducer between an open circuit and a shunt circuit in a way that reduces vibration. The steady-state vibration amplitude is reduced by exploiting the change in stiffness between states, manipulating the converted electrical energy, or both. Semi-active techniques typically require four switches per vibration cycle. Control laws such as state switching and synchronized switch damping require switches to occur at every...
Show moreSemi-active vibration reduction techniques switch a piezoelectric transducer between an open circuit and a shunt circuit in a way that reduces vibration. The steady-state vibration amplitude is reduced by exploiting the change in stiffness between states, manipulating the converted electrical energy, or both. Semi-active techniques typically require four switches per vibration cycle. Control laws such as state switching and synchronized switch damping require switches to occur at every displacement extrema. Due to the complexity of analyzing a system with discrete switches, these control laws were developed based on intuition. The few analyses that attempt to determine an optimal switching law mathematically only evaluate the system at resonance. This thesis investigates the effects of switch timing on vibration reduction and the frequency dependence of the optimal switch timing control law. Regardless of the switch timing, sensing uncertainties, noise, and modeling errors can cause the switches to occur away from the designed moment. Thus, this work also quantifies the expected degradation in vibration reduction performance due to variations in the designed switch time. Experimental, numerical, and analytical solutions agree that the optimal switch timing of these semi-active techniques depends on frequency. A closed-form solution for the optimal switch timing is derived in terms of well-known, non-dimensional parameters.
Show less - Date Issued
- 2016
- Identifier
- CFE0006336, ucf:51555
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0006336