View All Items
(1 - 3 of 3)
- Title
- RIGHT TURN SPLIT: A NEW DESIGN TO ALLEVIATE WEAVING ON ARTERIAL STREETS.
- Creator
-
Shaaban, Khaled, Radwan, Essam, University of Central Florida
- Abstract / Description
-
While weaving maneuvers occur on every type of roadway, most studies have focused on freeway maneuvers. Weaving occurring on non-freeway facilities, such as arterial streets, can cause significant operational problems. Arterial streets weaving typically occur when vehicles coming from a side street at an upstream intersection attempt to enter the main street from one side to reach access points on the opposite site at a downstream intersection by crossing one or more lanes. This dissertation...
Show moreWhile weaving maneuvers occur on every type of roadway, most studies have focused on freeway maneuvers. Weaving occurring on non-freeway facilities, such as arterial streets, can cause significant operational problems. Arterial streets weaving typically occur when vehicles coming from a side street at an upstream intersection attempt to enter the main street from one side to reach access points on the opposite site at a downstream intersection by crossing one or more lanes. This dissertation investigates the type of problems occurring on arterial streets due to the weaving movements and recommends a new design to alleviate weaving on arterial streets. Firstly, the dissertation examined the different weaving movements occurring between two close-spaced intersections at two sites in Florida and explained the breakdown conditions caused by the weaving movements at the two sites. Secondly, the dissertation proposed a new design, Right Turn Split (RTS), to alleviate the delay caused by the weaving movements. The new design proposed separating the worst weaving movement entering the arterial from the other movements and providing a separate path for this movement. The new method is easy to implement and does not require much right of way. Thirdly, the dissertation compared two microscopic models, SimTraffic and VISSIM, to choose the most suitable model to be used to study the operational benefits of the RTS design. Based on the results of the comparison, it was decided to use SimTraffic for the analysis. Fourthly, the dissertation proposed a new calibration and validation procedure for microscopic simulation models. The procedure was applied on SimTraffic using the traffic data from the two studied sites. The proposed procedure appeared to be properly calibrating and validating the SimTraffic simulation model. Finally, the calibrated and validated model was used to study the operational benefits of the RTS design. Using a wide range of geometric and volume conditions, 729 before and after pairs were created to compare the delay of similar scenarios before and after applying the RTS design. The results were analyzed graphically and statistically. The findings of the analysis showed that the RTS design provided lower delay on the arterial street than the original conditions.
Show less - Date Issued
- 2005
- Identifier
- CFE0000402, ucf:46346
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0000402
- Title
- Safety, Operational, and Design Analyses of Managed Toll and Connected Vehicles' Lanes.
- Creator
-
Saad, Moatz, Abdel-Aty, Mohamed, Eluru, Naveen, Hasan, Samiul, Oloufa, Amr, Yan, Xin, University of Central Florida
- Abstract / Description
-
Managed lanes (MLs) have been implemented as a vital strategy for traffic management and traffic safety improvement. The majority of previous studies involving MLs have explored a limited scope of the impact of the MLs segments as a whole, without considering the safety and operational effects of the access design. Also, there are limited studies that investigated the effect of connected vehicles (CVs) on managed lanes. Hence, this study has two main objectives: (1) the first objective is...
Show moreManaged lanes (MLs) have been implemented as a vital strategy for traffic management and traffic safety improvement. The majority of previous studies involving MLs have explored a limited scope of the impact of the MLs segments as a whole, without considering the safety and operational effects of the access design. Also, there are limited studies that investigated the effect of connected vehicles (CVs) on managed lanes. Hence, this study has two main objectives: (1) the first objective is achieved by determining the optimal managed lanes access design, including accessibility level and weaving distance for an at-grade access design. (2) the second objective is to study the effects of applying CVs and CV lanes on the MLs network. Several scenarios were tested using microscopic traffic simulation to determine the optimal access design while taking into consideration accessibility levels and weaving lengths. Both safety (e.g., standard deviation of speed, time-to-collision, and conflict rate) and operational (e.g., level of service, average speed, average delay) performance measures were included in the analyses. For the first objective, the results suggested that one accessibility level is the optimal option for the 9-mile network. A weaving length between 1,000 feet to 1,400 feet per lane change was suggested based on the safety analysis. From the operational perspective, a weaving length between 1,000 feet and 2,000 feet per lane change was recommended. The findings also suggested that MPR% between 10% and 30% was recommended when the CVs are only allowed in MLs. When increasing the number of MLs, the MPR% could be improved to reach 70%. Lastly, the findings proposed that MPR% of 100% could be achieved by allowing the CVs to use all the lanes in the network.
Show less - Date Issued
- 2019
- Identifier
- CFE0007719, ucf:52428
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0007719
- Title
- Microscopic Safety Evaluation and Prediction for Special Expressway Facilities.
- Creator
-
Wang, Ling, Abdel-Aty, Mohamed, Radwan, Essam, Eluru, Naveen, Lee, JaeYoung, Uddin, Nizam, University of Central Florida
- Abstract / Description
-
Expressways are of great importance and serve as the backbone of a roadway system. One of the reasons why expressways increase travel speeds and provide high level of services is that limited access is provided to permit vehicles to enter or exit expressways. Entering and exiting of vehicles are accomplished through interchanges, which consist of several ramps, thus the spacing between ramps is important. A weaving segment might form when an on-ramp is closely followed by an off-ramp. The...
Show moreExpressways are of great importance and serve as the backbone of a roadway system. One of the reasons why expressways increase travel speeds and provide high level of services is that limited access is provided to permit vehicles to enter or exit expressways. Entering and exiting of vehicles are accomplished through interchanges, which consist of several ramps, thus the spacing between ramps is important. A weaving segment might form when an on-ramp is closely followed by an off-ramp. The geometric design of ramps and the traffic behavior of weaving segments are different from other expressway segments. These differences result in distinct safety mechanisms of these two expressway special facilities. Hence, the safety of these two facilities needs to be addressed.The majority of previous traffic safety studies on expressway special facilities are based on highly aggregated traffic data, e.g., Annual Average Daily Traffic (AADT). This highly aggregated traffic data cannot represent traffic conditions at the time of crashes and also cannot be used in the study of weather and temporal impact on crash occurrence. One way to solve this problem is microscopic safety evaluation and prediction through hourly crash prediction and real-time safety analysis. An hourly crash study averages one or several hours' traffic data in a year and also aggregates crash frequencies in the corresponding hour(s). Then it applies predictive models to determine the statistical relationship between crashes and hourly traffic flow characteristics, such as traffic volume. Real-time safety analysis enables us to predict crash risk and distinguish crashes from non-crashes in the next few minutes using the current traffic, weather, and other conditions.There are four types of crash contributing factors: traffic, geometry, weather, and driver. Among these, traffic parameters have been utilized in all previous microscopic safety studies. On the other hand, the other three factors' impact on microscopic safety has not been widely analyzed. The geometric factors' influence on safety are generally excluded by previous researchers using the matched-case-control method, because the majority of previous microscopic safety studies are on mainlines, where the geometric design of a segment does not change much and geometry does not have a significant effect on safety. Not enough studies have adopted weather factors in microscopic safety analysis because of the limited availability of weather data. The impact of drivers on safety has also not been widely considered since driver information is hard to be obtained. This study explores the relationship between crashes and the four contributing factors. Weather data are obtained from airport weather stations and crash reports which record weather and roadway surface conditions for crashes. Meanwhile, land-use and trip generation parameters serve as surrogates for drivers' behavior.Several methods are used to explore and quantify the impact of these factors. Random forests are used in discovering important and significant explanatory variables, which play significant roles in determining traffic safety, by ranking their importance. Meanwhile, in order to prevent high correlation between independent variables, Pearson correlation tests are carried out before model estimations. Only the variables which are not highly correlated are selected. Then, the selected variables are put in logistic regression models and Poisson-lognormal models to respectively estimate crash risk and crash frequency for special expressway facilities. Meanwhile, in case of correlation among observations in the same segment, a multilevel modeling structure has been implemented. Furthermore, a data mining technique(-)Support Vector Machine (SVM)(-)is used to distinguish crash from non-crash observations. Once the crash mechanisms for special expressway facilities are found, we are able to provide valuable information on how to manage roadway facilities to improve the traffic safety of special facilities. This study adopts Active Traffic Management (ATM) strategies, including Ramp Metering (RM) and Variable Speed Limit (VSL), in order to enhance the safety of a congested weaving segment. RM regulates the entering vehicle volume by adjusts metering rate, and VSL is able to provide smoother mainline traffic by changing the mainline speed limits. The ATM strategies are carried out in microscopic simulation VISSIM through the Component Object Model (COM) interface. The results shows that the crash risk and conflict count of the studies weaving segment have been significantly reduced because of ATM.Furthermore, the mechanisms of traffic conflicts, a surrogate safety measurement, are explored for weaving segments using microscopic simulation. The weaving segment conflict prediction model is compared with its crash prediction model. The results show that there are similarity and differences between conflict and crash mechanisms. Finally, potential relevant applications beyond the scope of this research but worth investigation in the future are also discussed in this dissertation.
Show less - Date Issued
- 2016
- Identifier
- CFE0006414, ucf:51480
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0006414
