Current Search: weigh-in-motion (x)
View All Items
- Title
- CORRELATION OF ACOUSTIC EMISSION PARAMETERS WITH WEIGHT AND VELOCITY OF MOVING VEHICLES.
- Creator
-
Kolgaonkar, Amar, Moslehy, Faissal, University of Central Florida
- Abstract / Description
-
The thesis is motivated by the goal of doing initial investigation and experimentation for the development of Weigh-in-Motion (WIM) system using acoustic emission phenomenon. A great deal of research is going on for measuring the weight of moving vehicles. Weigh-in-motion of commercial vehicles is essential for management of freight traffic, highway infrastructure design and maintenance, and monitoring of heavy weight vehicles. The research work presents a methodology for correlating the...
Show moreThe thesis is motivated by the goal of doing initial investigation and experimentation for the development of Weigh-in-Motion (WIM) system using acoustic emission phenomenon. A great deal of research is going on for measuring the weight of moving vehicles. Weigh-in-motion of commercial vehicles is essential for management of freight traffic, highway infrastructure design and maintenance, and monitoring of heavy weight vehicles. The research work presents a methodology for correlating the weight of a moving vehicle with acoustic emission parameters (such as counts and energy). Furthermore, the correlation between the speed of vehicle with the acoustic emission parameters is developed. Preliminary analysis and experimentations were conducted for the study of propagation of acoustic signals in plate like structure and effect of dynamic loadings on Kaiser Effect. Initial testing revealed that there is a linear correlation between the impact force and the acoustic emission parameters. Also a polynomial regression of second order was found between the speed of vehicle and acoustic emission parameters. Road testing was conducted to investigate the correlation between weight of the vehicle and acoustic emission parameters. A linear relation was found between the weight of vehicle and acoustic emission parameters represented by counts, signal energy and absolute energy.
Show less - Date Issued
- 2005
- Identifier
- CFE0000490, ucf:46354
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0000490
- Title
- DEVELOPMENT OF A WEIGH-IN-MOTION SYSTEM USING ACOUSTIC EMISSION SENSORS.
- Creator
-
Bowie, Jeanne, Radwan, Essam, University of Central Florida
- Abstract / Description
-
This dissertation proposes a system for weighing commercial vehicles in motion using acoustic emission sensors attached to a metal bar placed across the roadway. The signal from the sensors is analyzed by a computer and the vehicle weight is determined by a statistical model which correlates the acoustic emission parameters to the vehicle weight. Such a system would be portable and low-cost, allowing for the measurement of vehicle weights in much the same way commercial tube and radar...
Show moreThis dissertation proposes a system for weighing commercial vehicles in motion using acoustic emission sensors attached to a metal bar placed across the roadway. The signal from the sensors is analyzed by a computer and the vehicle weight is determined by a statistical model which correlates the acoustic emission parameters to the vehicle weight. Such a system would be portable and low-cost, allowing for the measurement of vehicle weights in much the same way commercial tube and radar counters routinely collect vehicle speed and count. The system could be used to collect vehicle speed and count data as well as weight information. Acoustic emissions are naturally occurring elastic waves produced by the rapid release of energy within a material. They are caused by deformation or fracturing of a solid due to thermal or mechanical stress. Acoustic emission sensors have been developed to detect these waves and computer software and hardware have been developed to analyze and provide information about the waveforms. Acoustic emission testing is a common form of nondestructive testing and is used for pressure vessel testing, leak detection, machinery monitoring, structural integrity monitoring, and weld monitoring, among other things (Miller, 1987). For this dissertation, acoustic emission parameters were correlated to the load placed on the metal test bar to determine the feasibility of using a metal test bar to measure the weight of a vehicle in motion. Several experiments were done. First, the concept was tested in a laboratory setting using an experimental apparatus. A concrete cylinder was mounted on a frame and rotated using a motor. The metal test bar was applied directly to the surface of the cylinder and acoustic emission sensors were attached to each end of the bar. As the cylinder rotated, a motorcycle tire was pushed up against the cylinder using a scissor jack to simulate different loads. The acoustic emission response in the metal test strip to the motorcycle tire rolling over it was detected by the acoustic emission sensors and analyzed by the computer. Initial examinations of the data showed a correlation between the force of the tire against the cylinder and the energy and count of the acoustic emissions. Subsequent field experiments were performed at a weigh station on I-95 in Flagler County, Florida. The proposed weigh-in-motion system (the metal test bar with attached acoustic emission sensors) was installed just downstream of the existing weigh-in-motion scale at the weigh station. Commercial vehicles were weighed on the weigh station weigh-in-motion scale and acoustic emission data was collected by the experimental system. Test data was collected over several hours on two different days, one in July 2008 and the other in April 2009. Initial examination of the data did not show direct correlation between any acoustic emission parameter and vehicle weight. As a result, a more sophisticated model was developed. Dimensional analysis was used to examine possible relationships between the acoustic emission parameters and the vehicle weight. In dimensional analysis, a dimensionally correct equation is formed using measurable parameters of a system. The dimensionally correct equation can then be tested using experimental data. Dimensional analysis revealed the possible relationships between the acoustic emission parameters and the vehicle weight. Statistical models for weight using the laboratory data and using the field data were developed. Dimensional analysis variables as well as other relevant measurable parameters were used in the development of the statistical models. The model created for the April 2009 dataset was validated, with only 27 lbs average error in the weight calculation as compared with the weight measurement made with the weigh station weigh-in-motion scale. The maximum percent error for the weight calculation was 204%, with about 65% of the data falling within 30% error. Additional research will be needed to develop an acoustic emission weigh-in-motion system with adequate accuracy for a commercial product. Nevertheless, this dissertation presents a valuable contribution to the effort of developing a low-cost acoustic emission weigh-in-motion scale. Future research needs that were identified as part of this dissertation include: Examination of the effects of pavement type (flexible or rigid), vehicle speeds greater than 50 mph, and temperature Determination of the best acoustic emission sensor for this system Exploration of the best method to separate the data from axles which pass over the equipment close together in time (such as tandem axles) Exploration of the effect of repeated measures on improving the accuracy of the system.
Show less - Date Issued
- 2011
- Identifier
- CFE0003581, ucf:48903
- Format
- Document (PDF)
- PURL
- http://purl.flvc.org/ucf/fd/CFE0003581